COMPONENT SPECIFICATION. PC/104 AND PC/104 Plus CONNECTORS JANUARY 2013 CONTENTS: SECTION TITLE PAGE
|
|
|
- Wilfrid Allen
- 5 years ago
- Views:
Transcription
1 PC/104 AND PC/104 Plus CONNECTORS JANUARY 2013 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Part Number Summary 5 Appendix 2 Press-fit plated through holes 5 Sam Bennett PREPARED BY:... Mark Plested APPROVED BY:... Sheet: 1 of 5 Issue: 3 Date: 4 th January 2013 C/Note: 11827
2 PC/104 AND PC/104 Plus CONNECTORS 1. DESCRIPTION OF COMPONENT AND INTENDED APPLICATION. PC/104 and PC/104 Plus connectors are an industry-standard connector system used in PC/104 Embedded PC module stack applications. The PC/104 module stack is designed to use less space and at a lower cost than an equivalent backplane system, by utilising stackthrough connectors to interconnect PC boards within a stack. Standard height between module boards is 0.6 (15.24mm). 8-bit Module, comprising: 16-bit Module, comprising: = way 2.54mm pitch J3 J3 PCI Bus Module, comprising: = way 2.54mm pitch J3 = 120-way 2.00mm pitch PCI Bus Module, comprising: = way 2.54mm pitch J3 = 120-way 2.00mm pitch Figure 1 PC/104 Stack PC/104 connectors are 2.54mm pitch, either or ways. PC/104 Plus connectors are 2.00mm pitch, 4 x 30 (120) ways. The sockets have a tuning-fork style of contact. Solder or pressfit tail options are available, as are accessories for the range (see Appendix 1). 2. MARKING OF COMPONENT AND/OR PACKAGE (ORDER CODE). The marking (order code) shall appear on the package and varies according to individual items for a complete list, see Appendix 1. See the appropriate drawing for complete details
3 3. RATINGS MATERIALS. Moulding: PC/104 Solder Tail connectors (M20)......Nylon 6T, UL94V-0, black PC/104 Plus Solder Tail connectors (M22)......Nylon 6T, UL94V-0, black Press-fit Tail connectors (M20/M22)......PPS, UL94V-0, black PC/104 Plus Shroud (M22-604)......PBT, UL94V-0, black Contact: Female...Phosphor Bronze Male...Brass Finish: Solder Tail connectors μ Gold over Nickel Solder Tail header/socket (M22-602/603)...Gold flash over Nickel on contact area, tin on tails Press-fit Tail connectors μ Gold over Nickel 3.2. ELECTRICAL CHARACTERISTICS. Current per contact through all contacts at an ambient temperature of 20 C: PC/104 Solder Tail connectors (M20)... 3A max PC/104 Plus Solder Tail connectors (M22)... 1A max Press-fit Tail connectors (M20/M22)... 1A max Voltage Rating... 12V DC Dielectric Strength: PC/104 connectors (M20)... 1,000V AC for 1 minute PC/104 Plus connectors (M22)...800V AC for 1 minute Contact resistance (initial)...30m Ω max Contact resistance (after conditioning)...50mω max Insulation resistance: Solder Tail connectors (1,000V AC for 1 minute)... 5,000M min Press-fit Tail connectors (1000V AC for 1 minute)... 5,000M min 3.3. ENVIRONMENTAL CHARACTERISTICS. Temperature Range: PC/104 connectors (M20) C to +105 C PC/104 Plus Solder Tail connectors (M22) C to +105 C PC/104 Plus Press-Fit Tail connectors (M22-605/606) C to +85 C - 3 -
4 3. RATINGS (continued) MECHANICAL CHARACTERISTICS. Durability of mating contacts operations Durability of press-fit section... 3 operations Contact retention in moulding... 5N min Insertion force of individual contact: PC/104 connectors (M20) with 0.64mm square gauge N max PC/104 Plus Solder Tail connectors (M22) with 0.50mm square gauge N max PC/104 Plus Press-Fit Tail connectors (M22-605/606) N max Withdrawal force of individual contact PC/104 connectors (M20) with 0.64mm square gauge N min PC/104 Plus Solder Tail connectors (M22) with 0.50mm square gauge N min PC/104 Plus Press-Fit Tail connectors (M22-605/606) N min Press-fit insertion forces (to board): PC/104 individual contact... 80N max PC/ way connector... 4,000N max PC/ way connector... 3,000N max PC/104 Plus individual contact... 59N max PC/104 Plus 120-way connector... 7,840N max Press-fit withdrawal forces (to board): PC/104 individual contact... 20N min PC/ way connector... 1,280N min PC/ way connector N min PC/104 Plus individual contact... 15N min PC/104 Plus 120-way connector... 1,764N min - 4 -
5 APPENDIX 1 PART NUMBER SUMMARY. For further details on any of these parts (including PC board layouts and numbering), please see the applicable engineering drawing. A1.1 PC/104 CONNECTORS: 2.54mm Pitch, All connectors in this category are available in or ways replace XX with 32 or 20 respectively. M20-610XX45... PC Tail, Stackthrough PC/104 connector M20-611XX45... PC Tail, Non-stackthrough PC/104 connector M20-615XX05... Press-fit Tail, Stackthrough PC/104 connector M20-616XX05... Press-fit Tail, Non-stackthrough PC/104 connector A1.2 PC/104 Plus CONNECTORS: 2.00mm Pitch, All connectors in this category are available in 4 x 30 (120) ways, as denoted by 30 in the part number. M PC Tail, Stackthrough PC/104 Plus connector M PC Tail, Non-stackthrough PC/104 Plus connector M PC Tail, Non-stackthrough pin header M PC Tail, Non-stackthrough socket connector M PC/104 Plus shroud M Press-fit Tail, Stackthrough PC/104 Plus connector M Press-fit Tail, Non-stackthrough PC/104 Plus connector A1.3 ACCESSORIES: R M3 Hexagonal Male/Female spacer, 15.24mm long (for use on corners of stacked modules, for security and support) APPENDIX 2 PRESS-FIT PLATED THROUGH HOLES. A1.1 PC/104 CONNECTORS: Drill hole in epoxy board to Ø1.15 ±0.02mm. Plate hole with 25-75μ Copper (150 Knoop max hardness), 3μ min Nickel/Gold. Final plated hole diameter must be Ø mm. A1.2 PC/104 Plus CONNECTORS: Drill hole in epoxy board to Ø1.000 ±0.025mm. Plate hole with 25μ min Copper (150 Knoop max hardness), μ Nickel, μ Gold. Final plated hole diameter must be Ø mm
PC/104, PC/104 Plus Specification
PC/104, PC/104 Plus Specification Industry Standard bus connection systems, typically used on embedded PC applications. Designed for oard-to-oard stacking with a common bus. PC/104 Connectors mm pitch
DUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
PC Board Sockets. Specifications SOCKETS. Surface Mount, Single Piece construction. Throughboard, Two Piece construction. Materials.
Sockets Contents SMT PCB Sockets Sockets For Ø0.5mm Pin Sockets For Ø0.8mm Pin Sockets For Ø1mm Pin Sockets For Ø2mm Pin Test Sockets IC Socket Strip Dual Row IC Socket Surface Mount, Single Piece construction
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS MINITEK UNSHROUDED VERTICAL HEADERS TECHNICAL INFORMATION MATERIALS Housing: High temperature, black thermoplastic Flammability rating:
USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
RIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) IDC LOW PRO HDR 30P VERT LG LA AMP-LATCH
USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
QUICKIE SHROUDED HEADERS LOW PROFILE
BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle
USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
USB, MINI USB, MICRO USB FIREwIRE & MINI FIREwIRE UNIVeRSAl SeRIAl BUS & Ieee 1394 FIRewIRe USB & FwC SeRIeS
introduction: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety
USB & IEEE 1394 FIREWIRE
USB & IEEE 1394 FIREWIRE UNIVERSAL SERIAL BUS & IEEE 1394 FIREWIRE INTRODUCTION: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable,
RIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) 20 NOVO MIL/CTR 15DP,LEAD FREE 1658621-4
Amphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.
Amphenol Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. FEATURES & BENEFITS Available in 2 through 4 rows - Offers maximum design flexibility Tested and qualified to
Modular FLATPAQ. provided, and Elcon will provide samples, typically within one week.
Modular FLATPAQ Modular FLATPAQ connectors provide custom solutions to hot pluggable AC and DC power needs in a board-to-board format. By using off-the-shelf modular components, power and signal modules,
PRODUCT SPECIFICATION CUSTOM CONFIGURABLE MODULAR POWER DOCK CONNECTOR SYSTEM
1.0 SCOPE This Product Specification covers the custom configurable modular printed circuit board (PCB) Dock Connector System with gold plating. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER(S)
RH1-ZZ Description: RJ45 Over USB 3.0 Through Hole 10/100/1000 Base-T Contact Area : Gold Flash LED:L-Green/Orange;R-Orange
To: Customer P/N: UDE P/N: Description: RJ45 Over USB 3.0 Through Hole 10/100/1000 Base-T Contact Area : Gold Flash LED:L-Green/Orange;R-Orange Spec No. RH116037-00 Update Date 2016/11/1 Revision A Approved
Customer P/N: UDE P/N: RUK-ZZ Description:
To: Customer P/N: UDE P/N: Description: RJ45 Tab up over USB stack Through Hole 10/100/1000 Base-T Contact Area : 30μ'' min. Gold LED: L-Green/Orange;R-Yellow Spec No. RUK17006-00 Update Date 2017/6/7
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM. US Patent # 6,299,492 B1 2. POWER, RIGHT ANGLE EARLY 3. POWER, RIGHT ANGLE EARLY
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM US Patent # 6,299,492 B1 The HOTMATE board to board interconnection system provides a unique method of transferring hot pluggable power requirements within
2.54mm Pitch Board to Board Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
2.5mm & 3.5mm AUDIO JACKS STEREO & MONO EARPHONE JACKS ASJ SERIES
.mm &.mm AUDIO JACKS INTRODUCTION: Adam Tech ASJ Series Stereo Jacks are a broad range of.mm and.mm jacks used primarily in computer and multi-media audio applications. This series provides a multitude
USB, MINI USB, FIREWIRE & MINI FIREWIRE
INTRODUCTION: Adam Tech USB (Universal Serial Bus) and IEEE 139 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety of
Top Load Socket: BTB
The 9159 series of Board-to-Board interconnect system allows two PCB's to be mated end-to-end creating strips of LED lighting. Designed specifically for the unique Solid State Lighting (SSL) market requiring
PGA / BGA / PLCC SOCKETS
PGA / BGA / PLCC SOCKETS QUICK SELECTOR CHART PGA / BGA / PLCC PGA BGA PLCC GRID 2.54 mm INTERSTITIAL 1.27 mm 1.27 mm 1 mm SOCKETS Solder tail 156 161 165 SEE PAGE 173 Surface mount 156 161 165 166 169
BOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICTOR RECEPT ASSY, 38 POS.
RX CONNECTOR. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.54mm
RX CONNECOR mm Disconnectable Insulation displacement connectors for.27mm pitch ribbon cables pitch Features Conforms to MIL Standards s RX connectors conform to MIL standards (MIL-C-833) and are compatible
XH2. Half-pitch Board-to-Board Connectors
Half-pitch Board-to-Board Connectors XH2 Allows High-density Mounting for Electronic Devices. A Half-Pitch Connector with a 1.27-mm Pitch for Compactness. A pitch of 1.27 mm for high-density mounting of
3M Serial Advanced Technology Attachment (SATA) Connector Signal Plug, Boardmount, Surface Mount Right Angle and PTH Vertical
7-position supports motherboard signal requirements EMLB contacts for hot swap Blind mate polarization for easy cable attach Through-hole and surface mount options PCB retention clip aids manufacturing
RIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) A/L UNIV HDR 14P VERT AMP-LATCH Universal
Archer Connectors. Archer Kontrol. 1.27mm (.050") PITCH
rcher onnectors mm (.050") PITH The rcher range from Harwin is a series of mm (0.05 ) pitch connectors, offering single and double row options at half the P footprint of a 2.54mm (0.1 ) pitch connector.
BOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICT,REC,038,ASY,.025,TAPE,CAP
SSL - Top Load Socket
The 9159 series of Board-to-Board interconnect system allows two PCB's to be mated end-to-end creating strips of LED lighting. Designed specifically for the unique Solid State Lighting (SSL) market requiring
CF CARD CONNECTOR MA TYPE
CF Card 1.27mm (.5") pitch CF CARD CONNECTOR MA TYPE 5-circuit CF card connector Emboss Tape Features Socket Both dual-row straddle type and single-row SMT type sockets are available. Single-row SMT type
3M 4-Wall, Tripolarized Header.050".100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series
Tripolarized for robust alignment when mating to 820 series socket 50 mil 100 mil halves the connector length vs. traditional 100 mil x 100 mil products Latching Ejector for rugged high performance applications
Archer Connectors. Archer Kontrol. 1.27mm (.050") PITCH
rcher onnectors mm (.050") PITH The rcher range from Harwin is a series of mm (0.05 ) pitch connectors, offering single and double row options at half the P footprint of a 2.54mm (0.1 ) pitch connector.
SEPTEMBER C.CS.1000 / GB
SEPTEMBER 2005 - C.CS.1000 / GB C R I M P F L E X C O N N E C T O R S CRIMPFLEX connectors TECHNICAL DATA MATERIAL Phosphor bronze MALE SOLDER TAB PLATING The standard connector is tin plated (thickness
BOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) FB-5R,ASY,30,SIG,REC,SL,2.73
RH R13. Description: USB 3.0 Over RJ45 Through Hole 10/100/1000 Base-T Contact Area : 30μ Gold LED:L-Green/Orange;R-Yellow
To: Customer P/N: UDE P/N: Description: USB 3.0 Over RJ45 Through Hole 10/100/1000 Base-T Contact Area : 30μ Gold LED:L-Green/Orange;R-Yellow Spec No. RH20006-00 Update Date 2014/8/27 Revision C Approved
1Certified LR R Inner-housing lock. Outer-housing lock
.mm pitch/disconnectable Crimp style connectors (Combined use for both wire-to-board and wire-to-wire connections) a 0 This VL connector is designed for wire-towire and wire-to-board. mm pitch connector
IDC Assembly (depends on cable) -55/125 C. IDC Assembly (depends on cable) By ambient temperature: 20 C 1,2 A 70 C 0,9 A 100 C 0,6 A
mm Connectors Surface Mount Technology, Solderless Pressfit, IDC Electrical And Mechanical Characteristics Number of Pins Technical data Climate Category Bearing and operating temperature area Current
0.8mm Pitch Stacking Height 5 to 9mm Connector
0.8mm Pitch Stacking Height 5 to 9mm Connector FX6 Series Stacking Height: 5 to 9mm 5~9mm Features 1. Stacking Height 5 to 9mm The board to board stacking height can be set at every millimeter between
RFC CONNECTOR 2J Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors Signal/hybrid type drawer connector for unit connection. The RFC connector absorbs misalignment between the two units and also excels in durability. The
ZH CONNECTOR. 1 Certified LR R Disconnectable Crimp style connectors. Features. Specifications. Standards. 1.5mm
Crimp mm (.059") pitch ZH CONNECTOR Disconnectable Crimp style connectors Emboss Tape Features Compact, low profile design The ZH connector requires only about 45% of the installation space required by
XC5. DIN-style Twin-contact Connectors. Expanding the DIN Concept. Materials and Finish. Ratings and Characteristics
DIN-style Twin-contact Connectors Expanding the DIN Concept Mates with DIN connectors. Ideal for automated soldering because the Connectors sit on top of the board. Mounting dimensions of the DIN Style-1
RFC CONNECTOR 2J Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors Signal/hybrid type drawer connector for unit connection. The RFC connector absorbs misalignment between the two units and also excels in durability. The
Elma Bustronic CompactPCI Reference Sheet
Elma Bustronic CompactPCI Reference Sheet Rev. 4 5.10.10 The cpci reference sheet provides relevant reference material for the CompactPCI product line. The information provided may change at anytime. Elma
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPECIFICATIONS Features and enefits Meets UL 1086 Section 8
Dubox Product Presentation
Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Part Numbers 6. Markets & Applications 7. Marcomm Collaterals Product
Mini-Universal MATE-N-LOK 2 Connectors
MP Mini-Universal MTE-N-LOK 2 Product Facts One molded piece, secondary locking plug and cap housing assemblies Three-point stabilization to provide better terminal position Fully polarized to provide
Molex s family of high-speed Micro SAS Connectors featuring the Dual-stack Receptacle with Pin Cover
Design-enhanced Micro SAS connectors now include dual-drive stacked receptacles with an integrated ground plane and a protective pin cover for greater reliability in compact storage applications Molex
2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series Product Specifications Rating type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be
AMP Drawer Series Connectors Miniature Power Drawer (MPD) Connectors
Miniature Power Drawer (MPD) Connectors Product Facts High mating cycle life Low Mating and Un-mating force (< 0.2lbs per contact) Single-piece molded housing Molded-in guide pins provide generous blind-mateability
CF CARD CONNECTOR MA Type
Emboss Tape CF CARD CONNECTOR MA Type 1.27mm pitch/50-circuit CF card connector Socket / Dual-row straddle type, SMT type Card frame / for type I cards Adapter / for type I, II cards Header / for type
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C 2.54mm (.100") Pitch FEATURES AND SPECIFICATIONS Features and Benefits
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9 Title: Part Number: Description: MINI SAS Connectors Product Specification G40 Series 0.80mm Pitch, Cable End and Board Mount Revisions Control Rev. ECN
Product Specification AMP Connector USB Consortium, Plug & Receptacle. Lead Free Version
Product Specification 108-60034 AMP Connector USB Consortium, Plug & Receptacle Lead Free Version 1. Scope: 1.1 Contents: This specification covers the requirements for product performance, test methods
XC7. DIN Sequence Connectors. An improved DIN-standard Sequence. Connectors. connectors. Ratings and Characteristics. Materials and Finish
DIN Sequence Connectors XC7 An improved DIN-standard Sequence Connector ows power line to daughter board connection first and removal last. Used the same way as regular DIN connectors. Dimensions are those
CompactPCI PowerConnector
CompactPCI PowerConnector Table of Contents 1 Introduction............................................................. 2 Product Features......................................................... 3 Performance
343
.050" IDC CONNECTORS DUL ROW SOCKETs & Transition Plugs HFCS & HFDP SERIES Introduction: dam Tech.050" IDC Sockets and Transition Plugs are low profile, precision designed flat cable connectors that feature
PRODUCT SPECIFICATION
1.25 mm pitch SMT Wire to Board Connector 1 of 7 A 1.0 SCOPE This specification covers performance, tests and quality requirements for 1.25 mm pitch Wire to Board DIP & SMT Type of 10114826~10114831 Series.
XSLS SERIES. Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) KEL CORPORATION
Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) XSLS SERIES KEL CORPORATION KEL CONNECTORS,INC KEL Taiwan Co., Ltd. KEL Shanghai Co.,Ltd. www.kel.jp
6.2mm pitch/disconnectable Crimp style connectors. 1Certified LR R <Inner-housing lock>
6.mm pitch/disconnectable Crimp style connectors a 0 This VL connector is designed for wire-towire and wire-to-board 6.mm pitch connector corresponding to large current. Secondary retainer, which prevents
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
M20 and M22. (2.54mm and 2.00mm pitch)
M20 and M22 (2.54mm and 2.00mm pitch) M20 and M22 Connectors Great Design Flexibility Today s electronics and PCB designers are faced with many connector challenges, including applications with increased
D-Sub SEaled subminiature D connectors, 2.54 mm pitch
SE D-Sub SEaled subminiature D connectors, 2.54 mm pitch Page Technical characteristics.......................................... 02 IP 67 versions with turned solder cups......... 04 IP 67 versions with
PC/104, PC/104-Plus %ASYç3TACKINGçWITHç0RESS lt 160
160 PC/104, Contents Introduction 162 Overview 163 The Standard 164 166 167 PC/104 168 170 Accessories: 173 161 Introduction PC/104, Highest Quality for Established Form Factor PC/104 and is a standard
Power Connectors & Interconnection Systems
Product Facts Available in latch versions for VRMs up to 3 oz. Available with metal clip for VRMs over 3 oz. VRM connectors to support a wide variety of power supply standards Solder tail, press-fit and
2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be chosen according to applications,
ERNIPRESS Trapezoidal-Connectors Series TMC
ERNIPRESS Trapezoidal-Connectors Series TMC Subminiatur-D Connectors to DIN 41 652/IEC 807-3 with Press-fit zone General Solderless press-in technology for connectors in bus systems permits rationalized
2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR J
Emboss Tape.mm pitch/disconnectable Crimp style connectors Radial Tape JST 1 Specifications Current rating: 3 A AC, DC (AWG #) Voltage rating: 0 V AC, DC Temperature range: - C to +8 C (including temperature
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF PCPR CONNECTOR SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF PCPR CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 CONTENTS Section PAGE 1.0 SCOPE.. 3 2.0 APPLICABLE STANDARDS 2.1 Regulatory
3M Ribbon Cable Socket and Header, Series 451 & " x.050" (1.27 mm x 1.27 mm)
1 of 8 3M Ribbon Cable Socket and Header, Series 451 & 452.050" x.050" (1.27 mm x 1.27 mm) Product Specification: 78-5102-0091-4 Revised: 05-01-2013 2 of 8 Page Cover Page..... 1 Contents 2 1. Scope......
Elcon CROWN EDGE Card Edge-style High Current Connectors
Elcon CROWN EDGE Card Edge-style High Current Connectors CROWN EDGE is a board-to-board power interconnect solution that uses Elcon high performance Crown contact technology configured to mate directly
PRODUCT SPECIFICATION
PRODUCT SPECIFITION PAGE: 1 OF 7 REV: A Serial ATA Connector, (22SAPP-X-X) LIST OF REVISION REV PAGE DESCRIPTION ECN. NO. DATE A 01-07 NEW E9201035 01/24/03 PRODUCT SPECIFITION PAGE: 2 OF 7 REV: A Serial
Product Specification. Mezza-pede SMT Connector Low Profile 1.0mm Pitch
Mezza-pede SMT Connector Low Profile 1.0mm Pitch Rev. 1 December 7, 2016 1.0 Scope This product specification applies to 1.0mm pitch Mezza-pede SMT Connectors, designed for the mating and unmating of a
PRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors terminated with 20 to
Filtered Combo D-Subminiature Connectors
Filtered Combo D-Subminiature Connectors Spectrum s line of filtered combo D-subs provide high insertion loss with tubular capacitive filtering. These connectors are available with 20 Amp power contacts,
CABLE CONNECTOR 6100/6200/6200S/6230 SERIES. 2.54mm Pitch Flat Ribbon Cable Connector K-7
CABLE CONNECTOR 2.54mm Pitch Flat Ribbon Cable Connector 6/6/6S/62 SERIES K-7 6/6/6S/62 SERIES 2.5mm PITCH FC CONNECTOR 2.54mm Pitch FC Connector Product Line-up SERIES / FIGURE TYPE CONNECTOR STYLE TERMINATION
Connector with mm square contacts DIC- 131 DIC- DIC- 129 DIC- 128A DIC- 129A AC 500V AC 1000V. 20 milliohms or less
mm Pitch Connectors DIC series mm Pitch Connectors Outline The DIC series provides various connectors for switching between circuits on PCB in combination with various male connectors, for various-pattern
Interface Connectors for Miniature, Portable Terminal Devices
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
3M Mini-Clamp Socket 2 mm Boardmount, Straight Solder Tails 372 Series
2 mm Boardmount, Straight Solder Tails 72 Series Compact design saves board space High number of mating cycles Mating latch features provide a reliable interconnection in demanding applications Enables
High-density multi-pin connectors
High-density multi-pin connectors Mating and mounting conditions to DIN 41612/IEC 60603-2 General With the ever increasing miniaturization and higher packaging densities in highly integrated circuits there
MAXIMUM SOLUTIONS (2/14 -- PR606) Mill-Max Mfg. Corp. 190 Pine Hollow Road, Oyster Bay, NY Fax:
MAXIMUM SOLUTIONS Mill-Max Series 854 Single Row and 855 Double Row Pitch Surface Mount and Through-Hole Spring-Loaded Connectors and Mating Target Connectors Mill-Max has developed high density, (1,27
(MR) Miniature Rectangular Connectors (Continued)
Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug
Minitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation
Minitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation Apr 2014 FCI Minitek Pwr 4.2 and 3.0 Overview Communication 2 Typical Server Storage Application Need Signal and Power pin to control and drive HDD
D-SUBMINIATURE (D-SUB) ECONOMY RANGE CONNECTORS
INPUT/OUTPUT CONNECTORS D-SUBMINIATURE (D-SUB) OVERVIEW FCI s D-Subminiature (D-Sub) connectors are part of an industry standard for applications requiring robust and reliable connectors. These proven
Product Performance Specification Mini Power Connector
Product Performance Specification Mini Power Connector 1. Scope 1.1 Content This specification covers the performance, tests and quality requirements for the Mini Power Connector and connector system.
0.6 mm Pitch, Docking Station Connectors
mm Pitch, Docking Station Connectors EX0 Series Features 1. Secure electrical and mechanical connection The signal contacts wipe of 1.5 mm and built-in selfalignment assures reliable connection between
1.27mm Pitch Two-Piece Connectors
1.7mm Pitch Two-Piece Connectors HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-833) HIF Series (Board direct mount type) Features 1. Product Variation The
Milli-Grid 2.00mm (0.79 ) Pitch. Interconnect System for Complete Design Flexibility
Milli-Grid for Complete Design Flexibility Milli-Grid 50394, 87396 Crimp Terminal 5110, 78045 Receptacle Crimp Housing 87568 IDT Receptacle 87569 IDT Strain Relief 87831, 78246 Through-Hole 87832 SMT 87833,
CMC Hybrid Connectors Standard and Power Versions
The Molex family of provides a sealed, high-density, modular and cost-effective connection system for heavy-duty, powertrain and body-electronics applications in the transportation industry The CMC connector
Sales: Technical: Fax:
DATA SHEET Weatherproof Order code Manufacturer code Description 23-2650 PX0410/02S/5560 2 WAY FREE SOCKET MICRO BUCCANNEER 23-2652 PX0410/03S/5560 3 WAY FREE SOCKET MICRO BUCCANNEER (RC) 23-2654 PX0410/04S/4550
Micro D Series Filtered Connectors
Micro D Series Filtered Connectors For designs that require even smaller connector packages, API s Spectrum Control brand has designed a line of filtered Micro D-Subminiature connectors. This line of connectors
3M (TM) Ribbon Cable Socket and Header, 451 and 452 Series.050" x.050" (1.27 mm x 1.27 mm)
3M (TM) Ribbon Cable Socket and Header, 451 and 45 Series.050" x.050" (1.7 mm x 1.7 mm) Product Specification: 78-510-0091-4 Revised: 1-6-016 78-510-0091-4 Rev D of 9 Page Cover Page..... 1 Contents 1.
1.27mm Pitch Two-Piece Connector
1.7mm Pitch Two-Piece Connector HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-83503) HIF Series (Board direct mount type) HIF5 Series 1 (Card edge type)
2.54mm Pitch High Density Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
SPECIFICATION MARCH MULTI MEDIA MEMORY CARD CONNECTOR. Kingfont Precision Ind. Co., Ltd. 17 FL-3, NO. 738, CHUNG CHENG ROAD.
SPECIFICATION SPEC. NO. SP0A24 REV B DATE MARCH-26-2004 PRODUCT NAME PRODUCT NO MULTI MEDIA MEMORY CARD CONNECTOR SDCMF-X07XXW1XX Kingfont Precision Ind. Co., Ltd. 738 17 3 17 FL-3, NO. 738, CHUNG CHENG
HD Series. Signal Connector DIN Applicable Markets: Mil-Aero Space Marine
Signal Connector DIN 41612 HDC and HDD interchangeable with DIN41612 C and D 0.6 mm and 1.0 mm Hypertac contacts, in a two or three row format Up to 192 positions HDT style offers mixed arrangements with
EL CONNECTOR. Disconnectable Crimp style wire-to-wire connectors. Features. Specifications. 4.5mm
Crimp.mm (.") pitch EL CONNECTOR Disconnectable Crimp style wire-to-wire connectors The contacts for the compact EL connector can be easily inserted into the connector housings. The plug housing and the
PRODUCT SPECIFICATION
SINGLE ROW CONNECTOR SYSTEM 1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors
Interface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Overview The ST Series interface connectors are specifically designed for use as Input/Output (I/O) connectors on portable information devices.