OpenAir Accessories and Spare Parts for Air Damper Actuators. Overview, functions and applications for GCA, GBB and GIB. Type Designation / Use
|
|
|
- Lucinda Davidson
- 5 years ago
- Views:
Transcription
1 Z31 OpenAir Accessories and Spare Parts for Air Damper Actuators Overview, functions and applications for GCA, GBB and GIB ASC ASK Accessories for rotary actuators This overview provides a list of the accessories to functionally enhance the GCA, GBB, and GIB actuators as well as a list of the spare parts for the actuators. Application examples and important dimensions are contained in the respective mounting installations (see document no.). Type Designation / Use (classification no.) ASK (M4626.1) Rotary/linear set for duct mounting (with mounting plate, external bearing) 4699Z42 GCA...1 GBB...1 GIB...1 To convert rotary to linear movement for duct mounting Ball joints for push rod 8 mm dia. Not suited for GIB actuators, If the end stop is provided by the CM2N4699en Building Technologies
2 Type Designation / Use (classification no.) ASK71.2 Rotary/linear set for frame mounting (with mounting plate, external bearing) GCA...1 GBB...1 GIB...1 To convert rotary to linear movement for frame (wall) mounting Not suited for GIB actuators, If the end stop is provided by the (M4626.2) 4699Z43 ASK (M4626.3) Rotary/linear set with lever 4699Z40 To convert rotary to linear movement. Suited for direct duct or wall mounting of the actuator via rear mounting Damper mounting for actuator with additional rotary/linear function ASK (M4626.4) Rotary/linear set with lever and mounting plate 4699Z41 To convert rotary to linear movement Mounting the actuator on the mounting plate allows for actuatorside duct or frame mounting ASK71.9 Universal lever 4697J07 GCA... GBB... GIB... To convert linear to rotary movement, for mounting on an adjacent damper shaft Can be used in connection with ASK71.1 to ASK (M4614.1) ASK (M4613.1) Bracket for powerpack 4699Z46 GCA12..1 GCA32..1 GCA13..1 GIB13..1 GIB33..1 As locking element for two rotary actuators on the same shaft (tandem mounted) Powerpack is permitted only with two- or three-position control actuators providing ASK (M4613.2) Self-aligning bracket for powerpack 4699Z48 GCA16..1 GIB16..1 Serves as a self-aligning bracket with two rotary actuators on the same shaft (tandem mounted) This self-aligning bracket has been designed only for actuators with modulating control Not suited for GIB actuators, If the end stop is provided by the 2/6
3 Type Designation / Use (classification no.) ASK Special shaft adapter 4699Z47 GCA 1 GIB...1 This shaft adapter allows for centered mounting is suitable for shafts of mm dia. stays for all mounting positions within the side profile of the actuator exceeds the actuator length less than the standard shaft adapter is not suited for GIB actuators if the end stop is provided by the ASK74.7 Shaft extension For extending the drive shaft by up to approx. 240 mm. For drive shafts of mm dia. or 6 18 mm square Minimum shaft length 40 mm Can not be used in connection with ASK73.1 or ASK Z21 ASK (M ) Weather shield for rotary actuator 4699Z55 6x 3x 4699P01 2x 3x Provides additional protection of the rotary actuator against dust and splash-water in the case of outdoor use. UV-resistant ASK75.4 Weather shield for rotary actuator a b Provides additional protection to rotary actuator and when mounting in any given position (M ) c d ASC77.1E ASC77.2E External auxiliary switches b g ASC77.1E (1 switch) ASC77.2E (2 switches) f a e d c (M4615) 4615Z10 3/6
4 Accessories for linear actuators Type Designation / Use (classifikation no.) ASK72.1 Linear/rotary set (with cardan joint) GBB 2 To convert linear to rotary movement Mounting the actuator together with the linear set allows for cardanic suspension, can be swiveled on two levels (M4656.1) 4699Z45 Linear limitation by adjusting the clamp on the push rod Ball joints for push rod 8 mm dia. ASK72.2 Linear/rotary set with mounting plate a b c To convert linear into rotary movement Mounting the actuator on the mounting plate allows for actuatorside frame or duct mounting d Taptite M6 x 16 Linear limitation by adjusting the clamp on the push rod (M4656.2) 4699Z44 e 4.8 x 13 DIN7981 Ball joints for push rod 8 mm dia. ASK (M4656.3) Weather shield for linear actuator 4699Z49 GBB161.2 GBB163.2 GBB131.2 GBB331.2 Provides additional protection to linear actuator and when mounting in any given position Only for actuator s with one cable Actuators for fire and smoke protection dampers Type Document no. (Classific. no.) ASK79.4 ASK79.5 Designation / Delivery Actuator Application Function Duct tip for temperature monotoring unit GGA.. ASK79.4 ( 72 C ) ASK79.5 ( 95 C ) (M4610) Spare parts for rotary actuators Spare partnumber Designation / delivery Actuator Application Function ASK71.06 (S55859-Z117) Standard shaft adapter compl. GCA 1 GIB 1 This shaft adapter is self-centering suited for shafts of mm dia. 4699Z64 4/6
5 Spare part- Designation / Application number delivery For actuator ASK74.17 Shaft adapter square compl. GCA 1 (S55859-Z108) ASK74.18 GIB 1 (S55859-Z109) ASK74.19 (S55859-Z110) ASK74.20 (S55859-Z111) ASK71.02 (S55859-Z102) Accessory kit 4697Z18 Function 15 mm 12 mm 10 mm 8 mm Consisting of: Axial bracket Fixes axle adapter in the actuator. 4697J J J J23 Plastic adapter with position indicator Required on short damper shafts (< 20 mm). It is inserted into the shaft adapter and carries the position indicator. Position indicator It is clamped on the shaft adapter or the plastic adapter and indicates the air damper rotational angle of the. Plug indicator Fixes the position indicator onto the plastic adapter. ASK71.03 (S55859-Z114) Mounting bracket compl. (set of 10) 4699Z32 The mounting bracket is used to prevent the actuator from twisting and is secured with 2 steel screws (4.8 x 13 mm, DIN 7981) Screw taptite M6 x 16 mm 4699Z33 Self-tapping screw to fasten the actuator on the mounting, duct or wall plate Turnkey for manual adjustment GCA...1 Manual adjustment for the shaft adapter. 4614Z Fork clamp GCA 1 GIB 1 The fork clamp is used to prevent the actuator from twisting. 5/6
6 Issued by Siemens Switzerland Ltd Building Technologies Division International Headquarters Theilerstrasse 1a 6300 Zug Switzerland Tel Siemens Switzerland Ltd, 2015 Technical specifications and availability subject to change without notice. 6/6
Use. Functions. OpenAir TM. Linear version, modulating, AC 24 V
4 666 OpenAir TM Air damper actuators Linear version, modulating, AC 24 V GBB16...2 Electromotive linear actuators, DC 0...10 V modulating control signal, nominal force 440 N, operating voltage AC 24 V,
Fast running actuators for air dampers
4 608 OpenAir TM Fast running actuators for air dampers Fast runner rotary version, GAP19 Electronic actuator for 2-position, 3-position, or modulating control, nominal torque 6 Nm, at 2 s running time,
Rotary version, three-position control
4 622 Residential Air damper actuators GXD..31.1 Rotary version, three-position control Electric motor-driven actuators for three-position control 1.5 Nm nominal torque AC 24 V or AC 230 V rated voltage
N20010, N NON-SPRING RETURN DAMPER ACTUATOR 20/34 Nm (177/300 lb-in) FOR MODULATING CONTROL SPECIFICATIONS GENERAL FEATURES PRODUCT DATA
N21, N341 NON-SPRING RETURN DAMPER ACTUATOR 2/34 Nm (177/3 lb-in) FOR MODULATING CONTROL SPECIFICATIONS Supply voltage Nominal voltage PRODUCT DATA 24 Vac 2%, 5/6 Hz; 24 Vdc -1...+2% 24 Vac, 5/6 Hz; 24
Air damper actuators
4 604 OpenAir Air damper actuators Rotary version, AC/DC 24 V and AC 230 V GQD...1 GQD 1 Electric motor-driven actuators for two-position and three-position control as well as DC 0 10 V control 2 Nm nominal
ALPHA Small Distribution Boards SIMBOX 63/SIMBOX WP
ALPHA Small Distribution Boards SIMBOX 63/SIMBOX WP SIMBOX 63 /4 Introduction /5 Flush mounting distribution boards /6 Hollow-wall distribution boards /7 Surface mounting distribution boards /7 Hood-type
Cables. U.S. Registered Trademark EN0B-0341GE51 R0402 Copyright 2002 Honeywell Inc. All rights reserved
N20010/N34010 NON-SPRING RETURN DAMPER ACTUATOR 20/34 Nm (177/300 lb-in) FOR MODULATING CONTROL PRODUCT DATA GENERAL These direct-coupled damper actuators provide modulating control for: air dampers, VAV
Digital input modules
8 172 TX-I/O Digital input modules TXM1.8D TXM1.16D Two fully compatible versions: TXM1.8D: 8 inputs, each with a three-color LED (green, yellow or red) TXM1.16D: As TXM1.8X, but 16 inputs, each with a
Air Damper Actuators Modbus RTU
s OpenAir Air Damper Actuators Modbus RTU GEB.., GIB.. Non-spring return types Damper actuators 15 Nm / 35 Nm (non-spring return) with Modbus communication GEB.. 15 Nm nominal torque GIB.. 35 Nm nominal
Air Damper Actuators Modbus RTU
s OpenAir Air Damper Actuators Modbus RTU GMA.., GCA.. Spring return types Air Damper actuators 7 Nm / 18 Nm (spring return) with Modbus communication GMA.. 7 Nm nominal torque GCA.. 18 Nm nominal torque
MarTest. Test Indicators
- - Overview Order on our SECURE website: - Versions Measuring Dial style Readings Styli Order no. Order no. range with Kit* Standard S ±." --.". mm 6 S ±." --.". mm 6 SG ±." --.". mm 7 SGI ±." (±. mm)
MarTest. Test Indicators
- - Overview - Versions Standard Measuring Dial style Readings Styli Order no. Order no. range with Kit* S ±. mm --. mm. mm SG ±. mm --. mm. mm 7 SA ±. mm --. mm. mm SGA ±. mm --. mm. mm S ±." --.". mm
SERIE 59. Rear clamp. Frontal clamp HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS
HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Hollow shaft from Ø 10 to 14 mm Protection class IP67 according
Terminal Equipment Controller Enclosure
Document No. 550-196 Terminal Equipment Controller Enclosure Product Description A Terminal Equipment Controller enclosure is a general-purpose metal cabinet with a removable cover that houses an electronic
Ball and Socket Shafts Series 0.800
Ball and Socket Shafts Series 0.0 Ball and Socket Shafts Series 0.0.1 Size 0..9 Md max Nm double, with length compensation, Standard bore Spline profile Standard bore Spline profile Standard bore When
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX Special features compact dimensions protection class IP54 mountable over back-lash free pivot heads with a large angle
YOUR MEASURING TASKS ARE SENSITIVE. MARTEST IS HIGHLY SENSITIVE.
- and Touch Probes YOUR MEASURING TASKS ARE SENSITIVE. MARTEST IS HIGHLY SENSITIVE. Since 1936 Mahr is one of the leading global producers of test indicators, we have achieved this with the continuous
TXM1.8RB. TX-I/O Blinds module
s 8 178 8178p01 TX-I/O Blinds module TXM1.8RB 8 non-floating relay outputs for... 4 blinds motors with 2 end switches, or 2 blinds motors with 3 end switches, or 2 blinds motors with 2 end switches + 1
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX Special features compact dimensions protection class IP54 mountable over back-lash free pivot heads with a large angle
CIB 2924 Line-Powered Alert Ringer and Parts
CIB 2924 Line-Powered Alert Ringer and Parts CIB 2924 Comcode 103-974-697 Issue 1 CIB 2924 Line-Powered Alert Ringer and Parts The D181233 Line-Powered Alert Ringer and Parts (see Figure 1) consists of
M-2300-ZX Focus SVT Brake Conversion Kit INSTRUCTION SHEET
Please contact the Tech Hot Line for the most current instruction information (586) 468-1356!!! PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION!!! OVERVIEW: This kit is designed
1/2 Introduction. SIMBOX LC 1/7 Introduction 1/8 Flush-mounting and surfacemounting. 1/9 Dimensional drawings
Siemens AG 200 ALPHA SIMBOX Small Distribution Boards /2 Introduction /2 Introduction /3 Flush-mounting and hollow-wall distribution boards /4 Hood-type distribution boards /5 Accessories /6 Dimensional
BG 240. Spare parts list. Trowel. Valid from serial number Atlas Copco Construction Tools AB No c
BG 0 Spare parts list Trowel BG0 HSQP BG0 HSQP BG0 HSTP BG0 HSTP Valid from serial number BGB00000 BGB00000 BGF000000 BGF000000 0 Atlas Copco Construction Tools AB No. 900 0 0c 00 BG 0 Contents Contents
The Pro/Classic Series Printhead angle can be set between 0 and 90. Common settings are shown below. 192/32 1 Print Head
Pro/Classic Series Printhead Instructions 2464-172 Rev. H Getting Started Head Angle The Pro/Classic Series Printhead angle can be set between 0 and 90. Common settings are shown below. 90 32-39 27 352/32
For hoisting and mechanical handling, types XCR and XCK-MR For conveyor belt shift monitoring, type XCR-T
For hoisting and mechanical handling, types XCR and XCK-MR For conveyor belt shift monitoring, type XCR-T Presentation XCR With head for rotary movement operators, spring return to off position (1 contact
Suspension System CS-3000
Suspension System CS-3000 Flexible, easy to assemble, ergonomic New flexibility in operation and appearance: the Bernstein CS-3000 Variability in system configuration, advanced design and absolute ease
Optical Encoders. Sold & Serviced By: Toll Free Phone: Toll Free Fax:
SERVO-TEK SERVO-TEK PRODUCTS COMPANY, INC. Optical Encoders www.servotek.com Toll Free Phone: 877-378-0240 sales@servo2go.com RC-800 Summary Hollow Shaft Encoders ST50 Series High Performance Rotary Incremental
HANDLEBAR AND CONTROLS
HANDLEBAR AND CONTROLS Model 80 R, 80 RS, 80 RSE, 80 RSW, 80 BBC, 00 C 80 BBC 80 R, 80 RS, 80 RSE, 80 RSW, 00 C 8 8 0 0 8 0 8 0 0 8 PM00 0 00 00 0 Engine Bail Weldment(80 R, 80 RS, 80 RSE, 80 RSW, 00 C)
Universal Modules. Synco 700. Extension modules for use with controls of the Synco 700 family. Use
s 3 146 Synco 700 Universal Modules RMZ78 Extension modules for use with controls of the Synco 700 family. Use For heating, ventilation, air conditioning and chilled water plant equipped with controls
Radiator Lockshield Valves ADN.. AEN..
07 EN - Straight version ADN.. Angle version AEN.. ACVATIX TM Radiator Lockshield Valves ADN.. AEN.. for -pipe heating systems Valve bodies made of brass, mat nickel-plated DN 0, DN and DN 0 Integrated
Mounting Options. Maintains NEMA Type 12 and IEC IP55 enclosure rating when properly installed per Hoffman instructions.
763.422.2600 Spec-00560 F763.422.22 Mounting Options SYSPEND 28-MAX Suspension System Mounting Options SYSPEND 28-MAX Suspension System SYSPEND 28-MAX Suspension System, Type 2 TM INDUSTRY STANDARDS Maintains
TXM1.8U TXM1.8U-ML. Universal modules TX-I/O
s 8 173 TX-I/O niversal modules TXM1.8 TXM1.8-ML Two fully compatible versions: TXM1.8: 8 inputs/outputs with LED signal / fault indication TXM1.8-ML: As TXM1.8, but with additional local override facility
RMZ782B RMZ783B. Extension Modules. Building Technologies HVAC Products. Synco 700. for heating controller RMH760B
3 136 Synco 700 Extension odules for heating controller RH760B RZ782B RZ783B Extension modules for use with the RH760B heating controller to provide additional auxiliary functions Use Heating plants controlled
IS-DM220/IR/HB IS-DM220
IS-DM220/IR/HB IS-DM220 Installation Guide Indoor/Outdoor Ver. 1.2 00P6NX223ZXSEA2 Table of Contents 1. Indoor Camera Installation... 3 1.1 Hard Ceiling... 3 1.2 In-Ceiling (T-Bar) Mounting... 13 1.3 4S
N0524/N1024, N POS/N POS
N0/N0, N00-POS/N00-POS NON-SPRING RETURN DIRECT-COUPLED DAMPER ACTUATORS FOR FLOATING / -POSITION CONTROL PRODUCT DATA SPECIFICATIONS Supply voltage N0/N0 Vac/dc -%/+0%, 0/60 Hz N00-POS/N00-POS 0 Vac -%/+0%,
Super universal modules
s 8 174 TX-I/O Super universal modules TXM1.8X TXM1.8X-ML Two fully compatible versions: TXM1.8X: 8 inputs/outputs with LED signal / fault indication TXM1.8X-ML: As TXM1.8X, but with additional local override
OpenAir Rotary actuators with spring return GCA 1 Technical basics. Edition 2.2 CE1Z4613en Building Technologies HVAC Products
OpenAir Rotary actuators with spring return GCA 1 Technical basics Edition 2.2 CE1Z4613en 04.09.2006 Building Technologies HVAC Products 2/36 HVAC Products 04.09.2006 Contents 1 Introduction...5 1.1 Revision
2 x Dynamic Arms on 135 Post with C-Clamp
Installation Guide AWMS-2-D13-C 2 x Dynamic Arms on 135 Post with C-Clamp COMPONENT CHECKLIST RANGE A AWM-LC Post Clamp B AWM-AD Dynamic Arm (x2) C AWM-P13 135 Post D AWM-FC C-Clamp CONTENTS C-Clamp Page
Room unit with PPS2 interface
s 1 640 1640P01 Desigo RX Room unit with PPS2 interface For use with: QAX34.3 Equipment from the RXC, RXB, RXL and RXA (PPS2) ranges Desigo PX automation stations 1) Devices with a PPS2 interface Measurement
SAX.. ACVATIX Electromotive actuators for valves. with a 20 mm stroke
s 4 501 ACVATIX Electromotive actuators for valves SAX.. with a 20 mm stroke SAX31.. Operating voltage AC 230 V, 3-position control signal SAX61.. Operating voltage AC/DC 24 V, control signal DC 0 10 V,
Electromotive actuators for combi valves
s 4 833 ACVATIX Electromotive actuators for combi valves For combi valves VPF43.. and VPF53.. SQV..P.. SQV91.. Operating voltage AC/DC 24 V, Positioning signal 3-position, DC 0-10 V, DC 4-20 ma Position
Switches 6/1. 6/4 Introduction. 6/5 5TE8 control switches. 6/7 5TE4 8 pushbuttons. 6/9 5TE8 On/Off switches. 6/11 5TE1 switch disconnectors
6/4 Introduction 6/5 5TE8 control switches 6/7 5TE4 8 pushbuttons 6/9 5TE8 On/Off switches 4 6/11 5TE1 switch disconnectors 6 6/1 Switch to manual? Wherever electrical systems need to be switched on or
1 IF-810 or IF-811 Terminal (Slave) 2 Intended Use. 3 Assembly and Installation _V IF-810/IF-811
95-10326_V2016-10-20 IF-810/IF-811 1 IF-810 or IF-811 Terminal (Slave) Thank you for choosing an Interflex system. With an IF-810 or IF-811 terminal (slave), you have purchased a reliable device for capturing
Transducer mounting kits
Transducer mounting kits Robust design for field use Strong fixation for accurate measurement Versatile tools for different circuit breaker types Description The transducer mounting kit is a set of tools
Mechanical accessories
Bearing box Part no. 01209010, 01209029 Part no. 01209010 01209029 Shaft size Ø 15 mm Ø 10 mm Shaft load max Radial: 250 N, Axial: 150 N Speed max 4000 rpm Protection class IP 64 according to IEC 60529
Multitronic. Technical data
Multitronic EMC Aluminium enclosure system for MCR technology Integrated guide grooves for PCB s External mounting slots with spring nuts Technical data Material: DIN EN 573 EN AW-AlMgSi Ingress protection:
JSTD1 Safeball A Unique New Category 4 Two-Hand Control Device
JSTD1 Safeball A Unique New Category 4 Two-Hand Control Device Safeball is a completely new approach to the design of one and two-hand safety devices. Instead of the conventional approach using ordinary
NOVOHALL Rotary Sensor non-contacting. Series RSX-7900
NOVOHALL Rotary Sensor non-contacting Series RSX-7900 Special features very robust design to extreme environmental conditions high shaft load 300 N non-contacting, magnetic measuring angles up to 360 in
Accessories for control enclosures. BERNSTEIN attachment solutions. Double coupling head (console version with suspension system attachment)
25 Accessories for control enclosures BERNSTEIN attachment Single coupling head (suspended console version) Double coupling head (console version with suspension system attachment) 322.5 231 232 140 The
Intelligent Component Series Direct Coupled Damper Actuator Model MY8040A
Specifications/Instructions Intelligent Component Series Direct Coupled Damper Actuator Model MY8040A General Model MY8040A direct coupled damper actuator is a motorized actuator to open/close a damper.
SYSTEM 25 SYSTEM 50 AS SYSTEM 63 SYSTEM 75 SYSTEM 100. Alsident System 50. Antistatic (AS) Product Information
Alsident System 50 Antistatic (AS) Product Information . System 50 Antistatic General Information Product Specification Product description System 50 Antistatic Alsident System Airflow between 45-85 m
IKA Crushing 76 Dispersers (batch operation)
76 Dispersers (batch operation) Dispersers (batch operation) 77 T 18 basic ULTRA-TURRAX Competitively priced dispersing instrument for volumes of 1 to 1.500 ml (H2O). A wide speed range allows you to work
IBISTM. Duct diffuser with discs for supply air
TM Duct diffuser with discs for supply air Quick facts 0 flexible distribution pattern High induction capacity Suspended installation Easy installation Modular length: 00 mm Available in alternative colours
OpenAir Rotary damper actuators without spring return GDB/GLB Technical basics
OpenAir Rotary damper actuators without spring return GDB/GLB Technical basics CE1Z4634en 2016-07-29 Building Technologies Issued by Siemens Switzerland Ltd Building Technologies Division International
N20, N34 Series Non-Spring Return Direct Coupled Actuators
N0, N Series Non-Spring Return Direct Coupled Actuators INSTALLATION INSTRUCTIONS APPLICATION N0 and N Series Non-Spring Return Direct Coupled Actuators (DCA) are used within heating, ventilating, and
Duct Sensors. Building Technologies HVAC Products. Symaro. for relative humidity and temperature with calibration certificates
1 883 1883P01 1883P02 QFM4160 AQF4150 Symaro Duct Sensors for relative humidity and temperature with calibration certificates QFM41 Operating voltage AC 24 V / DC 1353 Signal output DC 010 V / 420 ma for
I Series Humidity/-temperature sensors with analogue output signals Technical Data Humidity Temperature
Galltec Mess- und Regeltechnik GmbH MELA Sensortechnik GmbH Boschstr. 4 Raasdorfer Str. 18 D-71149 Bondorf. Deutschland D-07987 Mohlsdorf-Teichwolframsdorf. Deutschland Tel. +49 (0)7457-9453-0 Tel. +49(0)3661-62704-0
Digital electropneumatic positioner
Digital electropneumatic positioner Type 879 can be combined with Compact metal housing Graphic display with backlight Easy start-up Comprehensive range of additional software functions Profibus DPV1 (optional)
EDUCATIONAL SPECTROPHOTOMETER ACCESSORY KIT AND EDUCATIONAL SPECTROPHOTOMETER SYSTEM
GAIN 0 Instruction Manual and Experiment Guide for the PASCO scientific Model OS-8537 and OS-8539 02-06575A 3/98 EDUCATIONAL SPECTROPHOTOMETER ACCESSORY KIT AND EDUCATIONAL SPECTROPHOTOMETER SYSTEM CI-6604A
IBIS. Duct diffuser with discs for supply air QUICK FACTS
Duct diffuser with discs for supply air QUICK FACTS 0 flexible distribution pattern Suspended installation Easy installation Modular length: 00 mm Standard colour White RAL 900 -- alternative standard
MK-101 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:
MK-0 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space below. The Serial
N05010/N10010 NON-SPRING RETURN DIRECT-COUPLED DAMPER ACTUATORS FOR MODULATING AND FLOATING / 2-POSITION CONTROL SPECIFICATIONS
N/N NON-SPRING RETURN DIRECT-COUPLED DAMPER ACTUATORS FOR MODULATING AND FLOATING / -POSITION CONTROL SPECIFICATIONS Supply voltage Nominal voltage PRODUCT DATA Vac/dc -%/+%, /6 Hz Vac/dc, /6 Hz All values
Service poles for industrial applications
Service poles for industrial applications Ready to go. The ISS basic profile Our industry service poles bundle power, data and compressed air in a compact and robust manner. This means relocations, for
9283P01. Extension module. Integration of existing PT-I/O modules in Desigo Used with PXC50...D, PXC100...D or PXC200...D
s 9 283 9283P01 Desigo PX Extension module Integration of existing PT-I/O modules in Desigo Used with PXC50...D, PXC100...D or PXX-PBUS The PXX-PBUS extension module allows for integrating existing PT-I/O
Tripods, levelling ling staffs and fasteners
s, levelling ling staffs and fasteners 88 THE BASIS FOR SOUND WORK To make full use of all the capabilities offered by a rotation laser or automatic level, a tripod is necessary. Laserliner offers an extensive
PARTS CATALOG 0CR10-M85900EN
PARTS CATALOG 0CR10-M85900EN Last update Jul., 2013 Contents Fig. No. Fig. Name Fig. No. Fig. Name SD60 1. DRIVE(SD60) 2. UPPER HOUSING 3. INPUT SHAFT 4. SHIFT LEVER 5. SUPPORT(REMOTE CONTROL) 6. LOWER
Rotary Measuring Technology Absolute encoders, Singleturn, Profibus-DP
Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable Increased ability
3RV1 Circuit-Breakers
SIRIUS 3R Description Mountable accessories 3RV1 Circuit- Breakers Circuit-breaker S00 with mountable accessories 3 2 1 5.1 NSK-7715a 4 Circuit-breaker S0 with mountable accessories 1 7 3 5.2 2 6 NSK-7716a
IGLOO IGLOO EASY INSTRUCTION MANUAL
ENGLISH EASY C695 C698 INSTRUCTION MANUAL PRELIMINARY Congratulations on choosing a Clay Paky product! We thank you for your custom. Please note that this product, as all the others in the rich Clay Paky
1 IF-812 or IF-815 Terminal (Slave) 2 Intended Use. 3 Assembly and Installation _V IF-812/IF-815
95-10324_V2016-11-23 IF-812/IF-815 1 IF-812 or IF-815 Terminal (Slave) Thank you for choosing an Interflex system. With an IF-812 or IF-815 terminal (slave), you have purchased a reliable device for capturing
C-pan arm USERS INSTRUCTIONS
C-pan arm USERS INSTRUCTIONS Designed 1 of 12 and made in Denmark Thanks for purchasing a 9.Solutions product. With great passion, we design our products to be as versatile as possible. We hope that our
Digital electropneumatic positioner
Digital electropneumatic positioner Type 879 can be combined with Compact metal housing Graphic display with backlight Easy start-up Comprehensive range of additional software functions Profibus DPV1 (optional)
11. Wall and Floor Mounted Clips
11. Wall and Floor Mounted Clips The Flamco s BM range of wall mounted clips is designed for installing threaded tubes, sprinkler pipes, thin wall steel tubes and copper pipes. These one piece clips, complete
Maintains NEMA Type 12 and IEC IP55 enclosure rating when properly installed per Hoffman instructions.
Spec-00560 Mounting Options SYSPEND 28-MAX Suspension System SYSPEND 28-MAX Suspension System, Type 2 INDUSTRY STANDARDS Maintains NEMA Type 2 and IEC IP55 enclosure rating when properly installed per
MK-212 SERIES PARTS LIST MODELS: MK Part # MK SPCL Part # SPCL MK Part #
www.mkdiamond.com MK-1 SERIES PARTS LIST MODELS: MK-1- Part # 191 MK-1--SPCL Part # 191-SPCL MK-1-6 Part # 16 MK-1- Part # 191 MK-1-6 Part # 16 Revision 100 1.016 Manual Part No. 196-PM Caution: Read all
N20010-SER. NON-SPRING RETURN DAMPER ACTUATOR 20 Nm (177 lb-in) FOR ADJUSTABLE MODULATING CONTROL SPECIFICATIONS GENERAL FEATURES PRODUCT DATA
N20010-SER NON-SPRING RETURN DAMPER ACTUATOR 20 Nm (177 lb-in) FOR ADJUSTABLE MODULATING CONTROL GENERAL These direct-coupled damper actuators provide adjustable modulating control for: air dampers, VAV
4-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT
4-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT Y1 1710 2690 1710 2690 0 10 0 10 set by hand or by optional RCU (Remote Control Unit) X Y2 X 65 65 4-Port Antenna 1710 2690/1710
F2.5MHB(69M1) F2.5AMH 03(69M1) 2B69M 100E1
MHB(69M1) AMH 03(69M1) 2B69M 100E1 A1 FOREWORD This Parts Catalogue is related to the parts for the model(s) in the below frame. When you are ordering replacement parts, please refer to this Parts Catalogue
QXA2000 QXA2001. Condensation Monitor QXA2001 QXA2000 AQX2000
1 542 1542P03 1542P01 1542P02 QXA2001 QXA2000 AQX2000 Condensation Monitor QXA2000 QXA2001 The QXA2000 condensation monitor is used to avoid damage due to condensation on chilled ceilings and in HVAC plant.
Fume Hood Cable Sash Sensor
Desigo Room Automation Fume Hood Cable Sash Sensor DXA.B130 and DXA.B200 A peripheral device, to acquire the sash position of a laboratory fume hood for Siemens laboratory fume hood controllers. Cable
I Series Humidity/-temperature sensors with analogue output signals Technical Data Humidity Temperature General data
Galltec Mess- und Regeltechnik GmbH MELA Sensortechnik GmbH D-71145 Bondorf. Germany D-07987 Mohlsdorf-Teichwolframsdorf. Germany Tel. +49 (0)7457-9453-0. Fax +49 (0)7457-3758 Tel. +49(0)3661-62704-0.
Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
Operating Instructions Ceiling Mount Bracket Model No. WV-Q175 WV-Q175E Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
17AE2ACG011 MUSTANG COLT RZT 42 (2008) Page 1 of 22 Deck Lift & Controls
17AE2ACG011 MUSTANG COLT RZT 42 (2008) Page 1 of 22 Deck Lift & Controls 17AE2ACG011 MUSTANG COLT RZT 42 (2008) Page 2 of 22 Deck Lift & Controls Ref # Part Number Qty S/P/F Description 1 603-04160B 1
CONTAINER AND RELATED PARTS
Datum 2003-03-24 Date BEHÅLLARE CONTAINER AND RELATED PARTS 247 245 248 249 246 250 252 251 253 254 212 206 208 201 202 203 205 209 211 214 218 204 224 207 210 215 216 217 220 219 237 221 226 238 223 222
optris CoolingJacket Advanced
Installation instructions optris CoolingJacket Advanced Cooling housing for PI series, infrared video thermometer and infrared thermometer at high ambient temperatures Optris GmbH Ferdinand-Buisson-Str.
Pronto Air Personal Transporter
Parts Catalog Issued: Sep 20, 2018 Pronto Air Personal Transporter with MyBody Seating Parts Catalog Usage Guide The information contained in this document is subject to change without notice. This catalog
Removal and Installation8
8 Screw Types 8-4 Top Cover Assembly 8-5 Left Hand Cover 8-6 Right Hand Cover 8-10 Front Panel Assembly 8-14 Left Rear Cover 8-15 Right Rear Cover 8-16 Extension Cover (60" Model only) 8-17 Media Lever
TECHNICAL DATASHEET Absolute Encoder AC 58 - SUCOnet
Compact design SUCOnet or Hengstler-G1-Protocol Parameterizable: preset, direction, scaling factor, resolution PC communication via RS 485 with Hengstler-G1-Protocol Clamping flange TECHNICAL DATA mechanical
Grease Guns PRELIxx and PRELIxx PRO
Grease Guns PRELIxx and PRELIxx PRO 2014.1 Quality that leads Different grease gun colors for different grease types 03 Grease Guns PRELIxx and PRELIxx Pro 2014.1 Contents Contents PRELIxx 2014.1 Technical
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet MQ24A-SR Modulating damper actuator for adjusting dampers in technical building installations Air damper size up to approx. 0.8 m² Nominal torque 4 Nm Nominal voltage AC/DC 24 V Control
OpenAir Electronic Damper Actuator GDE/GLB Rotary Non-spring Return
OpenAir Electronic Damper Actuator GDE/GLB Rotary Non-spring Return Document No. 9-67 EA678R a b e d c f a. Actuator b. Position indicator c. Mounting bracket d. Mounting screws e. 4 mm hex key f. Shaft
YP40TX (Q9C9) U.S.A. 1N9C9-110E1
YP40TX () U.S.A. 1N9C9-110E1 ( ) YP40TX PARTS CATALOGUE 2014 by Yamaha Motor Co., Ltd. 1st edition, May 2014 All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha
This is trial version
s, s, Ejector coupling devices, Unscrewing components, Two-stage ejectors, Latch locking units, Mould slides-modular system 2.01 2.02 Ordering example : Z 40 / 1,6 x 40 Shaft Overall length Z02/... 2.1
AHC System. Specifications. Series MA210 MA310 Positioning Max. transportable mass
AHC System Series Automatic exchange of robot hand tools, FMS (flexible manufacturing system) implemented for assembly lines. The robot hand tools change automatically to accommodate workpieces of different
STANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...
STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...
INTERAPID Depth Feet. Brown & Sharpe CENTER FINDER. Model with a flat measuring face. Model with a prismatic measuring face H-16
INTERAPID Depth Feet Model with a flat measuring face ø28 ø8 Finish lapped measuring faces. Clamp with lock for mounting a dial gauge or an electronic probe Supplied ø6.5 without indicator 80 Suited carrying
Delivery. Connection. C. AA+BB Helicoidal cable 2. Radial M12 8p CCW. 3. Radial M23 12p CCW
PROGRAMMABLE INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Programmable incremental optical encoder from 1 to 65.536 pulses per rotation Programmable via USB, without an additional programming
Rotary Measuring Technology Absolute encoders, Multiturn, Profibus-DP
Mechanical drive Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
BELLOWS COVERS AND.
BELLOWS AND COVERS www.joycedayton.com BELLOWS AND COVERS REDUCE EXPENSIVE MAINTENANCE AND DOWN TIME Protect your Equipment Investment When bellows and covers are fitted to machinery, expensive maintenance
STEP-BY-STEP INSTRUCTIONS FOR BUILDING A MICHELSON INTERFEROMETER. TECHSPEC Optical Cage System
STEP-BY-STEP INSTRUCTIONS FOR BUILDING A MICHELSON INTERFEROMETER TECHSPEC Optical Cage System INTRODUCTION 2 What is a Michelson Interferometer? A Michelson Interferometer is a simple interferometric