Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX

Transcription

1 Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX Special features compact dimensions protection class IP54 mountable over back-lash free pivot heads with a large angle of free movement (up to ±12,5 ) very long life (depending on application) up to 100 million movements resolution better than 0.01 mm outstanding linearity up to ±0.05 % variable mechanical customer interfaces cable or connector version available heavy-duty version IP67 see data sheet TX2 Compact design and easy to assemble via pivot heads characterize this inexpensive transducer. This transducer is suitable for various industry applications. By the simplicity of the measuring system - passive and absolute - the transducer is largely insensitive to electrical interference. The measuring value remains despite power failure. The electrical connection can be made via a radial plug connector, a radial or axial cable. Transducers with and without restoring spring and mounting clamp, central thread or flange plates see separate data sheets TEX. Description Housing Mounting Actuating rod Bearings Resistance element Wiper assembly Electrical connections aluminium, anodized see drawing stainless steel (1.4305), rotatable, external thread M5 sleeve bearing conductive plastic precious metal multi-finger wiper 3-pin round connector M8x1 3-wire PUR-cable, 3x0.14 mm 2, shielded, 2 m or 5 m lengths

2

3 Type designations TEX TEX TEX TEX TEX TEX TEX TEX TEX TEX TEX Electrical Data Defined electrical range mm Electrical range mm Nominal resistance kω Resistance tolerance 20 ±% Independent linearity ±% Repeatability 0.01 mm Recommended operating wiper current < 1 µa Max. wiper current in case of mulfunction 10 ma Max. permissible applied voltage 42 V Effective temperature coefficient of the output-to-applied voltage ration typical 5 ppm/k Insulation resistance (500 VDC) >10 MΩ Dielectric strength (500 VAC, 50 Hz) <100 µa Mechanical Data Body length (dimension A) ±2 mm Mechanical stroke (dimension B) ±2 mm Min. distance between pivot heads nominal (dim. C), version_15, dim. D=18 mm Min. distance between pivot heads nominal (dim. C), version_13, dim. D=25 mm Weight approx. cable version TEX- -_1_ g connector version TEX- -_1_ g Operating force horizontal < 3.0 (at RT 20 C) N Environmental Data Temperature range C Operating humidity range (no condensation) % R.H. Vibration Hz A max = 0.75 mm a max = 20 g Shock 50 g 6 ms Life > 100 x 10 6 typ. movements Operating speed 10 m/s max. Protection class IP54 DIN EN 60529

4 Novotechnik Messwertaufnehmer OHG Postfach Ostfildern (Ruit) Horbstraße Ostfildern (Ruit) Tel Fax /2012 Art.-No.: Subject to changes Printed in Germany Ordering specifications Preferred types printed in bold Electrical version 002: Iinearized Electrical connection 101: 3-pin round connector M8x1, radial output 202: NT standard cable 2 m, radial output 205: NT standard cable 5 m, radial output T E X Series Mechanical fixing 3: Pivot heads long 5: Pivot heads short Mechanical version actuating rod 1: Transducer with one-side rod and thread M5 Protection class 4: one-side actuating rod, IP54 Electrical defined range Standard lengths from 0010 mm up to 0300 mm Output connector Cable Connector with cable Code 101 Code 202, 205 EEM 33-64, / -66 / -68 / -65 / -67 / -69 PIN 1 BN brown BN brown PIN 4 WH white BK black PIN 3 GN green BU blue Optional accessories PUR-cable with 3-pin female connector M8x1, 3x0.34 mm 2, IP67, unshielded: 2 m lengths, EEM-33-64, P/N , 5 m lengths, EEM-33-66, P/N , 10 m lengths, EEM-33-68, P/N PUR-cable with 3-pin angled female connector M8x1, 3x0.34 mm 2, IP67, unshielded: 2 m lengths, EEM-33-65, P/N , 5 m lengths, EEM-33-67, P/N , 10 m lengths, EEM-33-69, P/N Other cable on request. Process-controlled indicators MAP... with display, Signal conditioner MUP.../MUK... for current supply 24 V and standardized output signals. Signal conditioner MUP Important All values specified in this data sheet for linearity, lifetime and temperature coefficient are only valid for a sensor used as a voltage divider with virtually no load applied to the wiper (l e 1 µa).

5 Position Transducers with actuating rod potentiometric up to 300 mm, IP 54 Series TEX This cost effective transducer is characterized by its various mounting options and compact dimensions. Flexible mounting clamps, bushing mounts or flange plates for easy mounting under various conditions. For transducers with return spring and pivot head mounting, please see separate data sheets. Special features compact dimensions protection class IP54 very long life (depending on application) up to 100 million movements resolution better than 0,01 mm outstanding linearity up to ±0,05 % variable mechanical customer interfaces cable or connector version available IP 67 version see data sheet TX2 Typical applications are linear position measurements on small presses and textile machines as well as measurement of deformation and crowd distances in the testing technology. The use of a ball coupling is recommended for a side loadfree guidance. The electrical connection is provided by a M8 connector or a radial or axial cable. Description Housing Mounting Actuating rod Bearings Resistance element Wiper assembly Electrical connections aluminium, anodized see drawing stainless steel, rotatable sleeve bearing conductive plastic precious metal multi-finger wiper 3-pin round connector M8x1 3-wire, shielded cable, 2 or 5 m long

6

7 Type designations TEX TEX TEX TEX TEX TEX TEX TEX TEX TEX TEX * * Electrical Data Defined electrical range mm Electrical range mm Nominal resistance kω Resistance tolerance 20 ±% Independent linearity ±% Repeatability 0.01 mm Recommended operating wiper current < 1 µa Max. wiper current im case of malfunction 10 ma Max. permissible applied voltage 42 V Effective temperature coefficient of the output-to-applied voltage ratio typical 5 ppm/k Insulation resistance (500 VDC) >10 MΩ Dielectric strength (500 VAC, 50 Hz) <100 µa Mechanical Data Body length (dimension A) ±2 mm Mechanical stroke (dimension B) ±2 mm Weight approx. with cable TEX_XXXX_X11_002_ g with connector TEX_XXXX_X11_002_ g additional weight bushing mounts 3 g, flange plate 16 g Operating force horizontal < 3.0 (at RT 20 C) N Environmental Data Temperature range C Vibration Hz A max = 0.75 mm a max = 20 g Shock 50 g 6 ms Life > 100 x 10 6 typ. movements Operating speed 10 m/s max. Protection class IP54 DIN EN *)= on request

8 Novotechnik Messwertaufnehmer OHG Postfach Ostfildern (Ruit) Horbstraße Ostfildern (Ruit) Tel Fax /2010 Art.-Nr.: Subject to changes Printed in Germany Output connector Cable Connector with cable Code 101 Code 202, 205 EEM 33-64, EEM , 305 PIN 1 BN brown BN brown PIN 4 WH white BK black PIN 3 GN green BU blue Ordering specifications Electrical version 002: Independent linearity ±0.05 % bis ±0.25 % Electrical connection 101: 3-pin round connector M8x1, radial output 202: NT standard cable 2 m, radial output 205: NT standard cable 5 m, radial output 302: NT standard cable 2 m, axial output 305: NT standard cable 5 m, axial output T E X Series Mechanical mounting 1: Fixing clamps 2: Central mounting M10 up to 0150 mm 4: Flange plate mounting up to 0150 mm on request Mechanical version actuating rod x1x 1: Transducer with one-side actuating rod and threat M5 Protection class 4: one-side actuating rod, IP54 Electrical defined range Various standard lengths, 0010 up to 0300 mm Included in delivery Clamp mounting: 2 clamps incl. 4 cylinder head screws M5x20. Optional accessories Pivot Head Z-G01, Art.No Recommended accessories Connector M8x1, 2 m cable, EEM 33-64, IP67, Art.No ; Angled connector M8x1, 2 m cable, EEM 33-65, IP67, Art.No ; Ball coupling Z301 M5/M5, Art.No ; (s. data sheet accessories). Connector with longer cable length on request. Process-controlled indicators MAP... with display, Signal conditioner MUP.../MUK... for current supply and standardized output signals. Signal conditioner MUP Mounting instructions A ball coupling is recommended for backlash-free and side load-free operation to compensate parallel or angular errors between transducer axis and the direction of movement. Important All values specified in this data sheet for linearity, lifetime and temperature coefficient are only valid for a sensor used as a voltage divider with virtually no load applied to the wiper (l e 1 µa).

9 Position Transducers with return spring potentiometric up to 200 mm, IP 54 Series TEX This cost effective linear transducer is characterized by its various mounting options and compact dimensions. Mounting clamps, bushing mount or flange plates for easy mounting under various conditions. Special features compact dimensions protection class IP54 Position transducer with return spring very long life (depending on application) up to 50 million movements resolution better than 0.01 mm outstanding linearity up to ±0.05 % variable mechanical customer interfaces hardened tip cable or M8 connector available The return spring design allows a direct measurement without connection to the moving part. The electrical connection is provided by an M8 connector or a radial or axial cable. For transducers without return spring and pivot head mounting, please see separate data sheets. Description Housing Mounting Actuating rod Bearings Resistance element Wiper assembly Electrical connections aluminium, anodized see drawing stainless steel, rotatable sleeve bearing conductive plastic precious metal multi-finger wiper 3-pin round connector M8x1 3-wire, shielded cable, 2 or 5 m long

10

11 Type designations TEX TEX TEX TEX TEX TEX TEX TEX TEX * * 0200 Electrical Data Defined electrical range mm Electrical range mm Nominal resistance kω Resistance tolerance 20 ±% Independent linearity ±% Repeatability 0,01 (without side loads) mm Recommended operating wiper current < 1 µa Max. wiper current in case of malfunction 10 ma Max. permissible applied voltage 42 V Effective temperature coefficient of the output-to-applied voltage ratio typical 5 ppm/k Insulation resistance (500 VDC) >10 MΩ Dielectric strength (500 VAC, 50 Hz) <100 µa Mechanical Data Body length (dimension A) ±2 mm Mechanical stroke (dimension B) ±2 mm Dimension C ±2 mm Dimension D ±2 mm Weight approx. with cable TEX_XXXX_X21_002_ g with conector TEX_XXXX_X21_002_ g additional weight central mounting 3 g, flange plate 16 g Operating force horizontal 5.6 (at RT 20 C) ±0,8 N Operating frequency max. in center position (IP40) Hz in center position (IP65) Hz Environmental Data Temperature range C Operating humidity range (no condensation) % R.H. Vibration Hz A max = 0.75 mm a max = 20 g Shock 50 g 6 ms Life > 50 x 10 6 typ. movements Operating speed 5 m/s max. Protection class IP54 DIN EN *) = on request

12 Novotechnik Messwertaufnehmer OHG Postfach Ostfildern (Ruit) Horbstraße Ostfildern (Ruit) Tel Fax /2010 Art.-No.: Subject to changes Printed in Germany Output connector Cable Connector with cable Code 101 Code 202, 205 EEM 33-64, EEM , 305 PIN 1 BN brown BN brown PIN 4 WH white BK black PIN 3 GN green BU blue Ordering specifications Electrical version 002: Independent linearity ±0.05 % bis ±0.25 % Electrical connection 101: 3-pin round connector M8x1, radial output 202: NT standard cable 2 m, radial output 205: NT standard cable 5 m, radial output 302: NT standard cable 2 m, axial output 305: NT standard cable 5 m, axial output T E X Series Mechanical mounting 1: Clamps 2: Bushing mount M10 up to 0150 mm 4: Flange plate mounting up to 150 mm on request Mechanical version actuating rod x2x 2: Transducer with return spring and hardened tip Protection class 4: one-side actuating rod, IP54 Electrical defined range Various standard lengths, 0010 up to 0200 mm Included in delivery Clamp mounting: 2 clamps incl. 4 cylinder head screws M5x20 Recommended accessories Connector M8x1, 2 m cable, EEM 33-64, IP67, Art.No ; Angled connector M8x1, 2 m cable, EEM 33-65, IP67, Art.No ; Connector with longer cable length on request. Process-controlled indicators MAP... with display, Signal conditioner MUP.../MUK... for current supply and standardized output signals. Signal conditioner MUP Mounting instructions The standard hardened tip with M2,5 thread can be replaced with other gauging tips. The actuating rod is not locked against rotation. Important All values specified in this data sheet for linearity, lifetime and temperature coefficient are only valid for a sensor used as a voltage divider with virtually no load applied to the wiper (l e 1 µa).