A8N32-SLI Deluxe/WiFi Deluxe. Motherboard

Size: px

Start display at page:

Download "A8N32-SLI Deluxe/WiFi Deluxe. Motherboard"

Cameron Payne
5 years ago
Views:

1 A8N32-SLI Deluxe/WiFi Deluxe Motherboard

2 C2280 2

3 3

4 4

5 5

6 6

7 7

8 8

9 Jumper Mode Jumper Free (Default) 9

10 10

11 11

12 12

13 13

14 14

17 1-1

18 1-2

19 1-3

20 1-4

21 1-5

22 1-6

23 1-7

24 1-8

27 A8N32-SLI SB_PWR A8N32-SLI Onboard LED ON Standby Power OFF Powered Off 2-1

28 A8N32-SLI 2-2

29 2-3

30 24.5cm (9.6in) PS/2KBMS T: Mouse B: Keyboard SPDIF_O ATX12V CPU_FAN PWR_FAN SPDIF_O2 ESATA PARALLEL PORT AUDIO LAN1_USB12 LAN2_USB34 WIFI_G_USB10(USB910) SATA_RAID2 Marvell PCIE LAN PCIEX4_1 CHA_FAN1 NVIDIA C51D Socket 939 A8N32-SLI DDR DIMM_A1 (64 bit,184-pin module) DDR DIMM_A2 (64 bit,184-pin module) DDR DIMM_B1 (64 bit,184-pin module) DDR DIMM_B2 (64 bit,184-pin module) EZ_PLUG EATXPWR FLOPPY SEC_IDE PRI_IDE 30 5cm (12 0in) Marvell PHY PCIEX16_1 NB_FAN ACL850 PCI1 SB_FAN CD AUX PCI2 NVIDIA CK804 SLI SATA2 SATA1 FP_AUDIO TSB43AB22A IE1394_1 IE1394_2 PCIEX16_2 PCI3 SB_PWR USB56 CR2032 3V Lithium Cell CMOS Power USB78 CLRTC GAME Super I/O COM1 SATA3 CHASSIS 8Mb BIOS SATA4 PANEL CHA_FAN2 2-4

31 2-5

32 2-6

33 A8N32-SLI A8N32-SLI CPU Socket

34 2-8

35 2-9

36 2-10

37 CPU_FAN A8N32-SLI GND +12V Rotation A8N32-SLI CPU fan connector 2-11

38 A8N32-SLI DIMM_A1 DIMM_A2 DIMM_B1 DIMM_B2 80 Pins 104 Pins A8N32-SLI 184-pin DDR DIMM sockets 2-12

39 2-13

40 2-14

41 2-15

42 2-16

43 2-17

44 2-18 A B C

45 2-19

46 A8N32-SLI CLRTC A8N32-SLI Clear RTC RAM Normal (Default) Clear CMOS 2-20

48 2-22

49 2-23

50 A8N32-SLI FLOPPY s PIN 1 A8N32-SLI Floppy disk drive connector 2-24

51 A8N32-SLI SEC_IDE PIN 1 PRI_IDE A8N32-SLI IDE connectors A8N32-SLI SATA2 SATA1 GND RSATA_RXN3 RSATA_RXP3 GND RSATA_TXN3 RSATA_TXP3 GND GND RSATA_RXN4 RSATA_RXP4 GND RSATA_TXN4 RSATA_TXP4 GND GND RSATA_RXN2 RSATA_RXP2 GND RSATA_TXN2 RSATA_TXP2 GND GND RSATA_RXN1 RSATA_RXP1 GND RSATA_TXN1 RSATA_TXP1 GND SATA3 SATA4 A8N32-SLI SATA connectors 2-25

52 A8N32-SLI SATA_RAID2 GND RSATA_RXN1 RSATA_RXP1 GND RSATA_TXN1 RSATA_TXP1 GND A8N32-SLI SATA RAID connector 2-26

USB+5V USB_P6- USB_P6+ GND NC USB+5V USB_P8- USB_P8+ GND NC A8N32-SLI A8N32-SLI CD (black) Right Audio Channel Ground Ground Left Audio Channel AUX (white) Right Audio

53 USB+5V USB_P6- USB_P6+ GND NC USB+5V USB_P8- USB_P8+ GND NC A8N32-SLI A8N32-SLI CD (black) Right Audio Channel Ground Ground Left Audio Channel AUX (white) Right Audio Channel Ground Ground Left Audio Channel A8N32-SLI Internal audio connectors A8N32-SLI USB 2.0 connectors USB56 1 USB+5V USB_P5- USB_P5+ GND USB78 1 USB+5V USB_P7- USB_P7+ GND 2-27

54 TPA2- GND TPB2- +12V GND TPA2- GND TPB2- +12V GND A8N32-SLI A8N32-SLI FP_AUDIO A8N32-SLI Front panel audio connector MIC2 AGND MICPWR +5VA Line out_r BLINE_OUT_R NC Line out_l BLINE_OUT_L A8N32-SLI IEEE 1394 connectors IE1394_1 1 TPA2+ GND TPB2+ +12V IE1394_2 1 TPA2+ GND TPB2+ +12V 2-28

55 A8N32-SLI A8N32-SLI Game connector GAME +5V +5V J1B1 J2B1 J1CX J2CX GND MIDI_OUT GND J2CY J1CY J2B2 J1B2 MIDI_IN +5V A8N32-SLI COM1 PIN 1 A8N32-SLI COM port connector 2-29

56 A8N32-SLI CPU_FAN PWR_FAN CPU_FAN GND +12V Rotation PWR_FAN GND +12V Rotation CHA_FAN1 NB_FAN SB_FAN CHA_FAN2 A8N32-SLI Fan connectors CHA_FAN1 Rotation +12V GND NB_FAN GND +12V Rotation SB_FAN Rotation +12V GND CHA_FAN2 GND +12V Rotation 2-30

57 +5VSB_MB Chassis Signal GND A8N32-SLI CHASSIS A8N32-SLI Chassis intrusion connector (Default) A8N32-SLI +12V DC GND A8N32-SLI ATX power connectors ATX12V EZ_PLUG +12V DC GND +5V EZ_DET GND +12V +3 Volts -12 Volts Ground PSON# Ground Ground Ground -5 Volts +5 Volts +5 Volts +5 Volts Ground EATXPWR +3 Volts +3 Volts Ground +5 Volts Ground +5 Volts Ground Power OK +5V Standby +12 Volts +12 Volts +3 Volts 2-31

58 2-32

59 PLED SPEAKER A8N32-SLI PANEL PLED- PWR Ground PLED+ +5V Ground Ground Speaker IDE_LED+ IDE_LED- Reset Ground IDE_LED RESET PWRSW * Requires an ATX power supply. A8N32-SLI System panel connector 2-33

60 2-34

61 2-35

62 2-36

65 3-1

66 3-2

69 4-1

70 A:\>afudos /ooldbios1.rom A:\>afudos /ooldbios1.rom AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading flash... done Write to file... done A:\> 4-2

71 A:\>afudos /ia8n32sli.rom A:\>afudos /ia8n32sli.rom AMI Firmware Update Utility - Version 1.10(ASUS V2.07 ( BB) Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Warning!! Do not turn off power during flash BIOS Reading file... done Reading flash... done Advance Check... Erasing flash... done Writing flash... 0x0008CC00 (9%) 4-3

72 A:\>afudos /ia8n32sli.rom AMI Firmware Update Utility - Version 1.10(ASUS V2.07 ( BB) Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Warning!! Do not turn off power during flash BIOS Reading file... done Reading flash... done Advance Check... Erasing flash... done Writing flash... 0x0008CC00 (9%) Verifying flash.. done Please retart your computer A:\> 4-4

73 Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Floppy found! Reading file A8N32SLI.ROM. Completed. Start flashing

74 Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Floppy not found! Checking for CD-ROM... CD-ROM found. Reading file A8N32SLI.ROM. Completed. Start flashing

75 EZFlash starting BIOS update Checking for floppy... EZFlash starting BIOS update Checking for floppy... Floppy found! Reading file A8N32SLI.ROM. Completed. Start erasing... Start Programming... Flashed successfully. Rebooting. 4-7

76 4-8

77 4-9

78 4-10

79 4-11

BIOS SETUP UTILITY Main Advanced Power Boot Exit System Time [10:55:25]

5 in] Language [English] Primary IDE Master Primary IDE Slave Secondary

SATA Device Fourth SATA Device IDE Configuration System Information

[Not Detected] [Not Detected] [Not Detected] [Not Detected] Select Screen

Exit ESC Exit v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.

80 BIOS SETUP UTILITY Main Advanced Power Boot Exit System Time [10:55:25] System Date [Mon 09/22/2005] Legacy Diskette A [1.44M, 3.5 in] Language [English] Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave First SATA Device Second SATA Device Third SATA Device Fourth SATA Device IDE Configuration System Information [ST320410A] [ASUS CD-S520/A] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [Not Detected] Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright , American Megatrends, Inc. Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure the System Time. 4-12

] Language [English] Primary IDE Master [ST320410A] Primary IDE Slave [ASUS CD-S520/A] Secondary

Second SATA Device [Not Detected] Third SATA Device [Not Detected] Fourth SATA Device [Not

to select a field. Use [+] or [-] to configure system time.

Exit v02.58 (C)Copyright 1985-2004,American Megatrends, Inc.

81 BIOS SETUP UTILITY Main Advanced Power Boot Exit System Time [10:55:25] System Date [Mon 09/22/2005] Legacy Diskette A [1.44M, 3.5 in.] Language [English] Primary IDE Master [ST320410A] Primary IDE Slave [ASUS CD-S520/A] Secondary IDE Master[Not Detected] Secondary IDE Slave [Not Detected] First SATA Device [Not Detected] Second SATA Device [Not Detected] Third SATA Device [Not Detected] Fourth SATA Device [Not Detected] IDE Configuration [Not Detected] System Information Use [ENTER], [TAB], or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system time. Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright ,American Megatrends, Inc. Advanced PCI/PnP Settings WARNING: Setting wrong values in below sections may cause system to malfunction. Plug And Play O/S [No] PCI Latency Timer [64] Allocate IRQ to PCI VGA [Yes] Palette Snooping [Disabled] PCI IDE BusMaster [Enabled] 4-13

82 BIOS SETUP UTILITY Main Advanced Power Boot Exit System Date [Mon 09/22/2005] System Time [10:55:25] Legacy Diskette A [1.44M, 3.5 in] Language [English] Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave First SATA Device Second SATA Device Third SATA Device Fourth SATA Device IDE Configuration System Information [ST320410A] [ASUS CD-S520/A] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [Not Detected] Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright , American Megatrends, Inc. Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure the System Time. 4-14

83 Main Primary IDE Master Device : Hard Disk Vendor : ST320413A Size : 20.0GB LBA Mode : Supported Block Mode : 16 Sectors PIO Mode : 4 Async DMA : MultiWord DMA-2 Ultra DMA : Ultra DMA-5 S.M.A.R.T : Supported Type [Auto] LBA/Large Mode [Auto] Block(Multi-sector Transfer) [Auto] PIO Mode [Auto] DMA Mode [Auto] SMART Monitoring [Auto] 32Bit Data Transfer [Enabled] BIOS SETUP UTILITY Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright , American Megatrends, Inc. 4-15

84 4-16

85 Main Serial-ATA 1 Serial-ATA 2 nvidia RAID Function SATA1 Controller SATA2 Controller BIOS SETUP UTILITY [Enabled] [Enabled] [Disabled] [Disabled] [Disabled] DISABLED: Disables the integrated IDE controller. PRIMARY: enables only the Primary IDE Controller. SECONDARY: enables only the Secondary IDE Controller. BOTH: enables both IDE Controllers. Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright , American Megatrends, Inc. 4-17

86 Main BIOS SETUP UTILITY AMIBIOS Version : 0128 Build Date : 09/05/05 Processor Type : AMD Sempron(R) Processor Speed : 1800 MHz Count : 1 System Memory Size : 512 MB Select Screen Select Item F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright , American Megatrends, Inc. 4-18

LAN Cable Status AMD Cool n Quiet Configuration JumperFree

Configuration PCI PnP USB Configuration POST Check LAN Cable

87 LAN Cable Status AMD Cool n Quiet Configuration JumperFree Configuration CPU Configuration Chipset Onboard Devices Configuration PCI PnP USB Configuration POST Check LAN Cable LAN Cable Status Pair Status Length 1-2 Open 0.0M 3-6 Open 0.0M 4-5 Open 0.0M 7-8 Open 0.0M 1-2 Open N/A 3-6 Open N/A 4-5 Open N/A 7-8 Open N/A [Disabled] Check LAN cable during POST. 4-19

88 AMD Cool n quiet Configuration Enable/Disable AMD K8 Cool N Quiet Cool n Quiet [Disabled] function. Configure System Frequency/Voltage AI Overclocking [Auto] SB to NB Frequency [200] Adjust PCIE Frequency [100] PEG Link Mode [Auto] Over-Voltage CPU VCORE [Disabled] Over-Voltage NB VCORE [Disabled] Over-Voltage SB VCORE [Disabled] Over-Voltage HyperTransport [Disabled] DDR VCORE [Auto] FID/VID Change [Auto] DDR Clock Skew [Auto] Select the target CPU frequency, and the relevant parameters will be auto-adjusted. Frequencies higher than CPU manufacturer recommends are not guaranteed to be stable. If the system becomes unstable, return to the default. 4-20

89 4-21

90 4-22

91 4-23

92 CPU Configuration Modele Version: Physical Count: 1 Logical Count: 1 AMD Athlon (tm) 64 Processor Revision: D0 Cache L1: 64KB Cache L2: 512KB Speed : 2020MHz Current FSB Multiplier: 10x Maximum FSB Multiplier: 10x Able to Change Feq : Yes ucode Patch Level : 0X41 Gart Error Checking [Disabled] MTRR Mapping [Continuous] 1T/2T Memory Timing [Auto] Memory Setting Memory Configuration Memory Configuration ECC Configuration Memory CLK : 133 MHz CAS Latency(Tcl) : 2.5 RAS/CAS Delay(Trcd) : 3 CLK Min Active RAS(Tras) : 7 CLK Row Precharge Time(Trp) : 3 CLK ROW/RAS Delay(Trcr) : 3 CLK ROW Cycle(Trc) : 10 CLK ROW Refresh Cycle(Trfc) : 12 CLK Read Write Delay(Trwt) : 4 CLK Read Preamble : 6.0 ns Asynchronous Latency : 7 ns 4-24

93 Memory Configuration Memclock Mode [Auto] MCT Timing Mode [Auto] MCT Extra Timing Mode [Auto] TREF [7.8us] TWCL [1] R/W Queue Bypass Count [8] Bypass Max [4] Idle Cycle Limit [16] Dynamic Idle Cycle Center [Enabled] DDR Driving Strength [Normal] Enable 32-Byte Granularity [Enabled] DDR Input Strobe Skew [Disabled] User Config Mode [Auto] Bank Interleaving [Auto] Burst Length [4 Beats] Hardware Memory Hole [Disabled] 4-25

94 4-26

95 ECC Configuration DRAM ECC Enable MCA DRAM ECC Logging ECC Chip Kill DRAM SCRUB REDIRECT DRAM BG Scrub L2 Cache BG Scrub Data Cache BG Scrub [Enabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] 4-27

96 Advanced BIOS SETUP UTILITY Advanced Chipset Settings WARNING: Setting wrong values in below settings may cause system to malfunction. K8 to NB Frequency [Auto] K8 to NB Link Width [Auto] SB to NB Frequency [1000 MHz] SB to NB Link Width [16 16 ] ENABLE: Allow remapping of overlapped PCI memory above the total physical memory. DISABLE: Do not allows remapping of memory. Primary Graphics Adapter [PciE->PCI->PciE2] Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright , American Megatrends, Inc. 4-28

$IRQ Select [IRQ5] 1394 [Enabled] Silicon Image Mode [RAID Mode] Onboard\GBE LAN1 [Enabled] Onboard LAN Boot ROM$

97 Configure ITE8712 Super IO Chipset Serial Port1 Address [3F8/IRQ4] Parallel Port Address [378] Parallel Port Mode [EPP+ECP] EPP Version [1.9] ECP Mode DMA Channel [DMA3] Parallel Port IRQ [IRQ7] OnBoard Game Port [Disabled] OnBoard MIDI Port [Disabled] MIDI IRQ Select [IRQ5] 1394 [Enabled] Silicon Image Mode [RAID Mode] Onboard\GBE LAN1 [Enabled] Onboard LAN Boot ROM [Disabled] MAC\GBE LAN2 [Auto] Onboard LAN Boot ROM [Disabled] OnBoard AC 97 Audio DEVICE [Enabled] 4-29

98 4-30

99 BIOS SETUP UTILITY Advanced Advanced PCI/PnP Settings WARNING: Setting wrong values in below sections may cause system to malfunction. Plug And Play O/S [No] PCI Latency Timer [64] Allocate IRQ to PCI VGA [Yes] IRQ-3 assigned to [PCI Device] IRQ-4 assigned to [PCI Device] IRQ-5 assigned to [PCI Device] IRQ-7 assigned to [PCI Device] IRQ-9 assigned to [PCI Device] IRQ-10 assigned to [PCI Device] IRQ-11 assigned to [PCI Device] IRQ-14 assigned to [PCI Device] IRQ-15 assigned to [PCI Device] NO: Lets the BIOS configue all the devices in the system. YES: Lets the operating system configure Plug and Play (PnP) devices not required for boot if your system has a Plug and Play operating system. Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright , American Megatrends, Inc. 4-31

100 Advanced USB Configuration Module Version USB Devices Enabled: None USB 1.1 Controller USB 2.0 Controller Legacy USB Support USB 2.0 Controller Mode BIOS EHCI Hand-off BIOS SETUP UTILITY [Enabled] [Enabled] [Enabled] [HiSpeed] [Enabled] Enabled Disabled Options Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright , American Megatrends, Inc. 4-32

101 BIOS SETUP UTILITY Main Advanced Power Boot Exit Suspend Mode Repost Video on S3 Resume ACPI APIC Support [Auto] [No] [Enabled] APM Configuration Hardware Monitor Select Screen Select Item +- Change Field F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright , American Megatrends, Inc. 4-33

102 BIOS SETUP UTILITY Power Restore on AC Power Loss Power On By PME# Power On By LAN(MAC) Power On By Ring Power On By PS/2 Keyboard Power On By PS/2 Mouse Power On By RTC Alarm [Power off] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] Go into On/Off or Suspend when Power button is pressed. Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright , American Megatrends, Inc. 4-34

103 4-35

104 BIOS SETUP UTILITY Power Hardware Monitor CPU Temperature [32.5ºC/90.5ºF] MB Temperature [36.0ºC/96.5ºF] CPU Fan Speed (RPM) [3813 RPM] Chassis Fan1 Speed (RPM) [N/A] Power Fan Speed (RPM) [N/A] VCORE Voltage [ 1.320V] 3.3V Voltage [ 3.345V] 5V Voltage [ 5.094V] 12V Voltage [11.880V] Smart Q-FAN Function [Disabled] CPU Temperature Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright , American Megatrends, Inc. 4-36

Boot Device 2nd Boot Device 3rd Boot Device [1st FLOPPY DRIVE] [PM-ST330620A] [PS-ASUS CD-S360]

105 APM Configuration Boot Device Priority Boot Settings Configuration Security Select Screen Select Item Enter Go to Sub-screen F1 General Help F10 Save and Exit ESC Exit Boot Device Priority 1st Boot Device 2nd Boot Device 3rd Boot Device [1st FLOPPY DRIVE] [PM-ST330620A] [PS-ASUS CD-S360] Select Screen Select Item Enter Go to Sub-screen F1 General Help F10 Save and Exit ESC Exit 4-37

106 Boot Settings Configuration Quick Boot Full Logo Display AddOn ROM Display Mode Bootup Num-Lock PS/2 Mouse Support Wait For F1 If Error Hit DEL Message Display Interrupt 19 Capture [Enabled] [Enabled] [Force BIOS] [On] [Auto] [Enabled] [Enabled] [Disabled] Allows BIOS to skip certain tests while booting. This will decrease the time needed to boot the system. Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit 4-38

107 Security Settings Supervisor Password : Not Installed User Password : Not Installed Change Supervisor Password Change User Password <Enter> to change password. <Enter> again to disabled password. 4-39

108 Security Settings Supervisor Password : Not Installed User Password : Not Installed Change Supervisor Password User Access Level [Full Access] Change User Password Clear User Password Password Check [Setup] 4-40

109 4-41

110 Exit Options Exit & Save Changes Exit & Discard Changes Discard Changes Load Setup Defaults 4-42

111 4-43

112

113

114 5-1

115 5-2

116 5-3

117 5-4

118 5-5

119 5-6

120 5-7

121 5-8

122 5-9

123 5-10

124 5-11

125 5-12

126 5-13

127 5-14

128 5-15

129 5-16

130 5-17

131 5-18

132 5-19

133 5-20 NVIDIA Firewall TM

134 5-21

135 5-22

136 5-23

137 5-24

138 5-25

139 5-26

140 5-27

141 NVIDIA RAID Utility Oct Define a New Array - RAID Mode: Striping Striping Block: Optimal Free Disks Array Disks Loc Disk Model Name Loc Disk Model Name 1.0.M XXXXXXXXXXXXXXXXXX 1.1.M XXXXXXXXXXXXXXXXXX 2.0.M XXXXXXXXXXXXXXXXXX 2.1.M XXXXXXXXXXXXXXXXXX [ ] Add [ ] Del [F6] Back [F7] Finish [TAB] Navigate [ ] Select [ENTER] Popup Mirroring Striping Stripe Mirroring Spanning 5-28

142 8K 16K 32K 64K 128K Optim Clear disk data? [Y] YES [N] 5-29

143 NVIDIA RAID Utility Oct Array List - Boot Id Status Vendor Array Model Name No 4 Healthy NVIDIA MIRROR XXX.XXG [Ctrl-X]Exit [ ]Select [B]Set Boot [N]New Array [ENTER]Detail Array 1 : NVIDIA MIRROR XXX.XXG - Array Detail - RAID Mode: Mirroring Striping Width: 1 Striping Block: 64K Adapt Channel M/S Index Disk Model Name Capacity 2 1 Master 0 XXXXXXXXXXXXXXXXX XXX.XXGB 1 0 Master 1 XXXXXXXXXXXXXXXXX XXX.XXGB [R] Rebuild [D] Delete [C] Clear Disk [ENTER] Return 5-30

144 Array 1 : NVIDIA MIRROR XXX.XXG - Select Disk Inside Array - RAID Mode: Mirroring Striping Width: 1 Striping Block: 64K Adapt Channel M/S Index Disk Model Name Capacity 2 1 Master 0 XXXXXXXXXXXXXXXXX XXX.XXGB 1 0 Master 1 XXXXXXXXXXXXXXXXX XXX.XXGB [ ] Select [F6] Back [F7] Finish Rebuild array? [ENTER] OK [ESC] Cancel 5-31

145 Array 1 : NVIDIA MIRROR XXX.XXG - Array Detail - RAID Mode: Mirroring Striping Width: 1 Striping Block: 64K Adapt Channel M/S Index Disk Model Name Capacity 2 1 Master 0 XXXXXXXXXXXXXXXXX XXX.XXGB 1 0 Master 1 XXXXXXXXXXXXXXXXX XXX.XXGB [R] Rebuild [D] Delete [C] Clear Disk [ENTER] Return Delete this array? [Y] YES [N] No 5-32

146 Array 1 : NVIDIA MIRROR XXX.XXG - Array Detail - RAID Mode: Mirroring Striping Width: 1 Striping Block: 64K Adapt Channel M/S Index Disk Model Name Capacity 2 1 Master 0 XXXXXXXXXXXXXXXXX XXX.XXGB 1 0 Master 1 XXXXXXXXXXXXXXXXX XXX.XXGB [R] Rebuild [D] Delete [C] Clear Disk [ENTER] Return Clear disk data? [Y] YES [N] 5-33

147 5-34

148 RAID Configuration Utility - Silicon Image Inc. Copyright (C) 2004 MAIN MENU Create RAID set Delete RAID set Rebuild Raid1 set Resolve Conflicts Low Level Format Logical Drive Info HELP Press Enter to create RAID set PHYSICAL DRIVE LOGICAL DRIVE 0 XXXXXXXXXXX XXXXXXMB 1 XXXXXXXXXXX XXXXXXMB 2 XXXXXXXXXXX XXXXXXMB 3 XXXXXXXXXXX XXXXXXMB STXXXXXXXXX STXXXXXXXXX STXXXXXXXXX STXXXXXXXXX XXXXXXMB XXXXXXMB XXXXXXMB XXXXXXMB :Select Menu ESC:Previous Menu Enter:Select Ctrl-E:Exit 5-35

149 MAIN MENU Create RAID set Delete RAID set Rebuild Raid1 set Resolve Conflicts Low Level Format Logical Drive Info RAID0 RAID1 RAID5 RAID10 SPARE DRIVE CONCATENATION MAIN MENU Auto configuration Manual configuration MAIN MENU Auto configuration Manual configuration chunk size4k 8K 16K 32K 64K 128K 5-36

150 PHYSICAL DRIVE 0 XXXXXXXXXXX XXXXXXMB 1 XXXXXXXXXXX XXXXXXMB 2 XXXXXXXXXXX XXXXXXMB 3 XXXXXXXXXXX XXXXXXMB MAIN MENU Create RAID set Delete RAID set Rebuild Raid1 set Resolve Conflicts Low Level Format Logical Drive Info RAID0 RAID1 RAID5 RAID10 RAID10 SPARE SPARE DRIVE DRIVE CONCATENATION MAIN MENU Auto configuration Manual configuration 5-37

151 PHYSICAL DRIVE 0 XXXXXXXXXXX XXXXXXMB 1 XXXXXXXXXXX XXXXXXMB 2 XXXXXXXXXXX XXXXXXMB 3 XXXXXXXXXXX XXXXXXMB MAIN MENU Auto configuration Manual configuration Create with data copy Create without data copy 5-38

152 MAIN MENU Auto configuration Manual configuration online copy offline copy 5-39

153 MAIN MENU Create RAID set Delete RAID set Rebuild Raid1 set Resolve Conflicts Low Level Format Logical Drive Info RAID0 RAID1 RAID5 RAID10 RAID10 SPARE SPARE DRIVE DRIVE CONCATENATION PHYSICAL DRIVE 0 XXXXXXXXXXX XXXXXXMB 1 XXXXXXXXXXX XXXXXXMB 2 XXXXXXXXXXX XXXXXXMB 3 XXXXXXXXXXX XXXXXXMB 5-40

154 5-41

155

156

157 6-1

158 6-2

159 6-3

-5 Volts +5 Volts +5 Volts +5 Volts Ground EATXPWR +3 Volts +3 Volts Ground +5

160 A8N32-SLI +12V DC GND A8N32-SLI ATX power connectors ATX12V EZ_PLUG +12V DC GND +5V EZ_DET GND +12V +3 Volts -12 Volts Ground PSON# Ground Ground Ground -5 Volts +5 Volts +5 Volts +5 Volts Ground EATXPWR +3 Volts +3 Volts Ground +5 Volts Ground +5 Volts Ground Power OK +5V Standby +12 Volts +12 Volts +3 Volts 6-4

161 6-5

162 6-6

163 6-7

164 6-8

P4B533-X. Motherboard

P4B533-X. Motherboard P4B533-X Motherboard C1458 2003 2 3 4 5 6 7 1 2 2 3 Jumper Mode Jumper Free (Default) 8 9 10 1-1 1-2 1-3 1-4 SB_PWR1 P4B533-X P4B533-X Onboard LED ON Standby Power OFF Powered Off 1-5 CPU_FAN1 ATX12V1