Measurement data transmission and processing Measuring modules for electronic length probes and handheld devices. IMBus* Universal measuring bus

Transcription

1 Measuring modules for electronic length probes and handheld devices IMBus* Universal measuring bus Universal interface between digital measuring devices or multi-point measuring devices and PC with CAQ/QA programmes. Suited for use in industrial environment. Properties: efficient and flexible interface module for electronic length measuring probe and measuring devices modular measuring bus structure for each PC max. 8 measuring buses (devices), for each measuring bus up to 64 connections, in this way connection of up to 512 (8 x 64) measuring devices combination of several module groups in a measuring bus, length up to 1200 m (connection by means of bus extension cable)[ supports the connection of several locally separated measuring devices/measuring stations on a measuring bus automatic addressing of the modules used in the measuring bus (Plug & Play) high resolution and measuring precision of the modules for the length measuring probes connections to peripheral devices (e. g. PC): USB, RS232, LAN, WLAN, Profibus additional modules for further measuring devices (e. g. incremental, analogue and pneumatic measuring devices) control of programme sequences voltage power supply easy installation of the modules (bus-interface RS485) optional use as table model or can be installed into hat rails software IMB_Test for system configuration and testing of the measured value transfer Options: software IBREXDLL to read, represent and evaluate measured data in MS-Excel, No page 901 software ComGage, for the measuring system and statistic process control in manufacture, page 901 software IBR-DDK.DLL (Device driver kit) for implementation of the measuring socket in common Windows CAQ/QS programmes compact measuring computer Mecc and Meic for the industrial sector Technical data: All models in robust AL housing, dimensions height x depth: x 62 mm (the width depends on the model) 1 max m 7 * IMBus = IBR-Messbus + 10 V ma WLAN 3 Profibus 4 Ethernet 5 RS232 6 USB 7 inductive probe 8 Incremental 9 Air measurement : IBRit-rf1 radio modules ; analog signals < measuring devices with Digimatic interface = measuring devices with Opto RS232 interface > Measuring devices with serial (RS232, RS422,...) or parallel (binary, BCD,...) interface IMBus measuring modules for inductive length measuring probe (semi-bridge) static and dynamic measurements resolution (16 bit): 3mm= 0.1 m or 1.5 mm = 0.05 m (optional) measuring rate: 1600 measured value/s (filtered, completed measuring values) Designation IMB-im2 IMB-im4 IMB-im8 Measuring instrument inputs Dimensions B (width) mm 50 87,5 162,5 Weight g Ident. No O. R. O. R. Ident. No. 010 Ident. No. 020 IMBus measuring modules for measuring devices with serial interfaces for digital measuring units with measuring devices with RS232 and OptoRS232 interfaces extensive measuring device driver library available Designation IMB-sm1 IMB-sm2 IMB-sm4 Measuring instrument inputs Dimensions B (width) mm ,5 Weight g Ident. No Unit price E (O. R.) (O. R.) (O. R.) Ident. No. 050 Ident. No

2 Measuring modules for electronic length probes and handheld devices IMBus measuring modules for Digimatic interfaces for measuring devices with Digimatic data output original connection cable of the measuring device manufacturer can be used Designation IMB-mi2 IMB-mi4 Measuring instrument inputs 2 4 Dimensions B (width) mm 50 87,5 Weight g Ident. No Unit price E (O. R.) (O. R.) Ident. No. 080 Ident. No. 085 IMBus PC connections Ident. No. 150 Connection cable IMB-usb, Length 2 m for IMB modules to PCs with USB Ports (USB 2.0), power supply of the modules via the UBS interface (max. 16 inductive length measuring probes) Ident. No. 155 Connection cable IMB-232, length 2 m for IMB modules to PCs with serial interface (COM1-COM8), voltage supply (e. g. IMB-ps2) required Ident. No. 160 Connection module IMB-LAN to integrate the IMBUS modules into the customers' networks (10/100 Mbit) each including: CD with initialization software (programmes IMB_Test, IBR_DKK.DLL and IBR-Simkey), bus connection plug IMB-usb Ident. No IMB-232 Ident. No IMB-LAN Ident. No. 160 Unit price E (O. R.) h Additional PC connections on request: IMB-WLA, module for LAN networks. IMB-pb, module for Profibus. Cable IMB-usb Cable IMB-232 bus connection plug Modul IMB-LAN IMBus voltage supply Power supply module IMB-ps2, width 75 mm, Wide voltage input VAC. In case of larger bus expansions, other power supply modules can be inserted at any point in the IMBUs. Display of non sufficient voltage supply on the bus connection plug. Designation IMB-ps Ident. No. 200 h Additional modules for power supply on request: IMB-dc1, direct voltage power pack 9-32 VDC. IMB-acc, with batteries for mobile use. Power pack module IMB-ps2 Measuring computer The ComGage software can be installed on the following computers: standard PC solutions with the operating systems Windows 98, ME, 2000, XP, Vista, Windows 7 measuring computer IMB-pc1 with Windows CE in IMBus module housing compact measuring computer Mecc with TFT monitor 8.4" and operating system Windows CE for max. 64 measuring instrument inputs industrial measuring computer Meic with TFT monitor 17" and operating system Windows XP, Windows 7, and/or CE for max. 512 measuring instrument inputs IMB-pc-1 measuring computer Measuring computer Mecc Measuring computer Meic h Further information, advice and quotations available on request. 900

3 Measuring modules for electronic length probes and handheld devices Software IBREXDLL The IBR software IBREXDLL allows measuring data acquisition in Excel. Measuring data can be imported from all IBR interface and measuring devices into MS-Excel, and freely assigned within the cells of any Excel workbook. The acquired measured data can then be statistically evaluated by means of control charts, histograms, static data etc. Software features: easy and clear operation automatic allocation of measuring inputs to columns or cursor-controlled measured data repositories in the Excel table visualisation of up to 20 measuring inputs on digit and bar displays with programmable tolerance marks time-controlled measured value recording zero balance and calibration of measuring inputs no impairment of standard Excel functions measured value acquisition via data button on the measuring device, function keys on the PC or pedal on the interface integrated SPC elements (control chart, histogram, statistical data etc.) support of European and Asian languages System requirements: Operating system Windows 95 to Windows 7, MS-Excel 2000/XP/2003/ Software IBREXDLL Ident. No. 505 ComGage measuring software with SPC for measurement technology and statistical process control in production The IBR measuring software ComGage is suitable both for simple display of measured values and for complex measuring tasks with control processes as well as for the testing of parts with various properties in small and large series. The IBR measuring software ComGage is available in a compact version (ComGage Compact) and in a modular version (ComGage Professional). Software features: easy and clear operation economical and modular for universal use for easy manual measuring stations, multi-point measuring equipment and automatic measuring sequences measured value acquisition from measuring and interface devices and from the keyboard universal linking of measuring inputs as well as measuring programmes for true running, roundness, evenness, coaxiality etc. graphic interface to create the display windows simple measurement sequence control online SPC elements control of control outputs and monitoring of digital inputs recording of master data print of test reports and measured values in form of tables converter for MS-Excel and QS-Stat* runs under Windows 95 to Windows 7 and CE support of European and Asian languages order-related saving of measured values* formula editor for complex control tasks* user administration additional functions, e.g. printing of bar codes, sending of s, correction data transfer to CNC machines can be individually added* * These functions are only available in the ComGage Professional version Software version ComGage Compact ComGage Professional Max. number of characteristics per inspection plan Max. number of inspection steps per inspection plan Max. number of measuring device connections 512 (8 x 64) Configuration options: for universal use with IBR IMBus modules and IBRit-rf1 radio module series can be used on standard Windows PCs can be used on measuring computers (Meic, Mecc and IMB-pc1) for rugged manufacturing environments h Further information, advice and quotations available on request. Clear programming of the various display elements 901

4 Measuring modules for electronic length probes and handheld devices Wireless measurement transmission with IBR radio modules The IBRit-rf1 radio module series serves for wireless data transmission from measuring devices to a PC. It comprises PC radio units and measuring device radio modules. Up to 500 measuring device radio modules can be connected to one PC radio unit. The IBRit-rf1 radio module series provides a double, independent checksum monitoring function for absolute data security. On the PC side, wireless communication with the measuring devices is established by the IBRit-rf1 PC radio unit. On the measuring device side, wireless communication with the PC is established by the IBRit-rf1 measuring device radio modules. Product description and advantages: user-friendly full data security low cost connects to all types of measuring devices transmission confirmation compact size long distance long battery life efficient working CE & FCC approval tolerance reply individually programmable 500 measuring devices 500 PC remote transmission stations 3 1 OK Tolerances Error 2 Sound Sound h Additional information, advice and quotations available on request. Please contact us. 1 Data 2 Feedback 3 Confirmation Measuring probe - interfaces BPX44 and TESA Twin Model variant TESA Interface BPX44 For wired measurement data transmission. particularly suitable for fine measuring devices and in the multi-location gauge technology in connection with electric length-measuring probes can be combined with up to eight interface boxes Design: 4 TESA standard measuring probes (half-bridge) up to 64 length measuring probe which can be connected via USB serial connection Advantages: TESA Interface BPX44 can be coupled with existing CAQ systems compatible with TESA TWIN (interface for wireless TESA measuring probes) TWIN measuring probe and TWIN interface For wireless measurement data transmission for wireless measured value acquisition on precision measuring instruments and in multi-point measuring technology in combination with TESA wireless measuring probe particularly suitable for precise measuring tasks in the production area and in the measuring room Design: eight connections for TESA wireless measuring probe up to 64 length measuring probe which can be connected via USB serial connection Advantages: facilitates maintenance and overcomes mobility barriers caused by the use of cables with conventional measuring probes quick, safe and reliable data transmission synchronised bidirectional communication static and dynamic measuring with up to 64 measuring probes possible TIS-Software: instruction library for direct communication with the relevant measuring probe interface initialize and set measuring probe determine measuring functions (static or dynamic) Displaying the measured values graphically and as measurement value export of measuring data (csv/com) Integration of third-party software is possible Delivery: TESA interface boxes TESA Twin or TESA PBX44, TIS software Design series TESA BPX44 interface box TESA Twin interface box Number of the measuring probe connections Unit 4 8 Type of connection Cable Wireless Software TESA-TIS included TESA-TIS included Ident. No Unit price E (O. R.) (O. R.) Prod. Gr. 366 BPX44 TESA Twin For detailed information on the PDF download use your mobile phone to scan the QR code. 902

5 for handheld devices RS232 for digital measuring devices Number Suitable for measuring devices: Display/evaluation devices and interface PC PRINTER SPC KEYBOARD INTERFACES Ident. No. U. pr. E T-Box 305 USB and RS232-USB TESA MICRO-HITE plus M TESA -HITE TESA TG-C10 TESA-HITE TESA-HITE MAGNA TESA-HITE plus M U U U 150 O. R TESA MICRO-HITE TESATRONIC TT10 U U U 170 O. R TESA DIGICO 1/2 U on request on request 870 (O. R.) Note: 25-pole peripheral plug with socket for feeding the dial gauge and socket for the connection of a pedal switch TESA DIGIT CAL/TESA CAL U (1) U (1) 090 O. R. TESA CAL IP65 TESA MICROMASTER TESA IMICRO U (2) U (2) 091 O. R TESA-HITE 350/600 TESATRONIC TT20/60/80/90 TESA DIGICO 205/305 a Vernier calliper Preisser Vernier calliper aelectronic dial gauges a dial gauge Type B U U 190 (O. R.) a electronic small dial gauges IP 65 a digital lever gauges IP 65 Sylvac internal micrometers IP 65 Sylvac internal quick measuring devices IP 65 U (3) U (3) U (3) 200 O. R. (1) Data transfer unidirectional (measured values triggered by activating the PRINT-/DATA key on the measuring device) (2) Data transfer bidirectional (data triggered on PC by use of various commands). (3) External power supply of interface via peripheral plug. Prod. Gr. 362 USB for digital measuring devices Number Suitable for measuring devices: PC with USB interface Ident. No. U. pr. E TESA DIGIT CAL/TESA CAL U 101 O. R. TESA CAL IP65 TESA MICROMASTER TESA IMICRO TESA-HITE 350/600 TESATRONIC TT20/60/80/90 TESA DIGICO 205/305 a Vernier calliper Preisser Vernier calliper Sylvac inside precision measuring devices a electron. dial gauges TESA MICRO-HITE plus M U 102 O. R. TESA M-HITE TESA TG-C10 TESA-HITE TESA-HITE Magua TESA-HITE PLUS M a dial gauge Sylvac micrometer gauge U 105 (O. R.) Prod. Gr

6 for handheld devices for digital measuring devices with Multi Com data interface Suitable for measuring devices: PC/interfaces with: Ident. No. U. pr. E a pocket Vernier calliper No a depth calliper, No a external screw-type micrometers, No a dial gauges, No Preisser Vernier calliper, No cable with data button RS232-interface 2) 010 O. R. a depth calliper, No a Vernier calliper No a external micrometers, No a dial gauges, No Preisser Vernier calliper, No cable with data button incl. software USB-Com for the connection of a measuring device 1) a depth calliper, No a Vernier calliper No a external micrometers, No a dial gauges, No Preisser Vernier calliper, No cable for Digimatic interface with data key 1) Full version USB-Com Professional see No page ) can also be used for interfaces T-Box 305 (No ) and RS232-USB-1 (No ) 3) can also be used for interface T-Box 305 (No ) h On request: Foot-operated switch and USB adapter cable USB interface 020 O. R. Digimatic interface 030 O. R. (interfaces only) 3) Prod. Gr. 303 for digital measuring devices with data interface TESA TLC (Twin Cal) Suitable for measuring devices: PC/interfaces with Ident. No. U. pr. E Tesa Twin Cal vernier calliper No USB interface 210 O. R. Tesa TwinCal vernier calliper No Tesa TwinCal depth calliper No Tesa TwinCal vernier calliper Tesa Twin Cal vernier calliper No Tesa Twin Cal vernier calliper No Tesa Twin Cal depth calliper No Tesa TwinCal vernier calliper Digimatic 220 O. R. Prod. Gr. 366 Accessory pedal Description Use Ident. No. U. pr. E For measuring devices TESATRONIC TT10/20/60/80/90 and cable No Activation of measuring value 350 (O. R.) Prod. Gr

7 Measurement data transmission systems Mobile data printer Printer SPC Compact, efficient device for a wide range of industrial applications within goods inward, in-process and end control procedures, as well as for audits. Performance features: comfortable, user-friendly controls (only 7 function keys, each with a separate function) supports the connection of almost all TESA digital measuring devices as well as instruments of other manufacturers automatically detects which device is connected (TESA measuring devices, as well as certain other makes of measuring instrument) registration measured values without specified tolerances with direct logging of measurements the user can also key in a command to retrieve a numerical statistical record of all the measurements recorded previously. for measuring a characteristic with a tolerance criteria* and directly: classification (red-green-yellow LEDs) record of the measured values and graphical representation of the location of the measured values relative to the tolerance limits can also be called up by the user via keys: Record of numerical statistics and histogram of all the previous measurements. Technical data: memory capacity 9999 measurements (1 part/1 features) printer: matrix, heat-sensitive, 40 characters power supply: mains adaptor 230 VAC-7,3 VDC connection jacks: measuring device connections Sub-D 9 pm and Ansley 10 pm pedal jack and mains adaptor jack dimensions: W x D x H = 180 x 180 x 84 mm weight: kg Options: battery cartridge 6V, rechargeable Number Designation Ident. No. U. pr. E PRINTER-SPC-SET comprising: PRINTER SPC, Heat-sensitive paper roll, mains adapter O. R. V/AC-7.3 V/DC Thermo paper roll 020 O. R. Battery case 6 V, rechargeable 030 (O. R.) * The tolerance limits are set on the measuring device and transferred by means of the DATA button Prod. Gr. 362 on the measuring device or the PRINTER SPC. h Connection cable for measuring devices see page 903. TESA Printer SPC protocol 905

8 Measurement data transmission systems Systems/software for measured data transmission in standard PC applications In quality assurance, many MS Office standard software applications, e. g. Excel, Access etc. are being used for individual records and statistic evaluations. The measurements required for this purpose were prevalently entered through the PC keyboard. Thereby, the user is demanding intensified systems that can direct transmit measured data to these applications. For this task the following products have been included in the delivery programme: software interface Product designation Version Use USB-Com Professional 1) page 906 Software on CD For measured data transmission from measuring devices with a multicom data interface to an Excel application Number of measuring devices with multicom interface: - up to 127 with USB Connection cable Number of measuring devices with RS232 interface: - 2 measuring devices with RS232 connection cable Connection cable No , page 904 Measured value actuation, optionally: data key on the measuring device, PC keyboard, pedals Connection cable RS232: page 903 Measured value actuation, optionally: data key on the measuring device, PC keyboard, pedals software-neutral Interfaces (connection made from the keypad interface of the computer) Product designation Version Use Opto-USB-0 page 907 USB keyboard interface with integrated For direct measured data transmission froma measuring device with an Opto-RS232 interface to a Windows application: Opto-RS232 measuring instrument connection cable Measured value actuation, optionally: data key on the measuring device or with timer RS232-USB-1 page 907 USB keyboard interface with RS232 measuring instrument connection For direct measured data transmission from a measuring device with RS232 interface to a Windows application: - Opto RS232 (bidirectional) connection cables No and 200, page RS232 connection cable No and 170, page 903 for TESA measuring devices and connection cable from the programmes of other manufacturers - multicom Connection cable No and 030, page 904 Measured value actuation, optionally: data button on the measuring instrument cable or measuring device, foot-operated switch or with timer T-Box 305 page 907 USB keyboard interface with 2 RS232- and 3 Digimatic measuring instrument connections For the direct transmission of measured data of up to 5 measuring devices 2) with RS232-/Digimatic interfaces to a Windows application: - Opto RS232 (bidirectional) connection cables No and 200, page RS232 connection cable No and 170, page 903 for TESA measuring devices and connection cable from the programmes of other manufacturers - Digimatic connection cable from the manufacturer's programme - multicom Connection cable No and 030, page 904 Measured value actuation, optionally: data button on the measuring instrument cable or measuring device or with foot-operated switch 1) Also available: Software USB-Com for 1 measuring device, scope of delivery with MultiCom/USB connection cable, No , page 904 2) Expansion options for the measuring instrument connections by combinations of several T-boxes Software USB-Com Professional for measured value transmission from measuring devices with data output multicom to a text file or to MS Excel Properties: connection of up to 127 measuring devices with multicom interface and USB connection cable No (reduced by the number of the used USB hubs and the connected pedals) additional connection of 2 measuring devices with RS232C-connection cable (see page 903) measured value actuation, optionally via the data key on the connection cable, the PC keyboard or via one/several pedals several pedals can be connected via USB. Allocation to the measuring devices according to the measuring task, can be freely defined. Measuring cycles can be configured (e. g. transmission of all measured values, or after actuation of the pedal) cyclic measured value requirement via time control transmission of measured values related to the measuring devices in separate columns, lines or tables System requirements: Windows 2000/XP/7, USB interface 2.0, CD/DVD drive, MS-Excel from Version 9 Scope of delivery: CD with detailed operating instructions as pdf file Ident. No. 400 h Connection cable for measurement tools see No page 904 Further information, advice and quotations available on request. Prod. Gr

9 Measurement data transmission systems USB keyboard interfaces Opto-USB-0 and RS232-USB-1 no driver file needed for the USB interface closing characters like e. g. Enter, Tab etc, can be set at the interface additional settings: Language, decimal character, timer option for multiple measurements: with this function, e. g. several attributes of a component can be measured and entered in a row in three columns power supply via USB interface Ident. No. 210 model Opto-USB-0 For direct measured data transmission from a measuring device with an Opto-RS232 interface to a Windows application: Design: USB keyboard interface and Opto RS232 connection cable in one unit, integrated menu key measurement data resolution: data button on measuring device timer function can be set from 0 to 99 s. For automatic transmission of the measured data to the application at defined intervals of time Scope of delivery: USB-Interface with operating manual Ident. No. 220 model RS232-USB-1 For direct measured data transmission from a measuring device with serial interfaces: RS232, MultiCom or Opto RS232 (bidirectional cable needed!) to a Windows application. Design: USB keyboard interface and integrated menu key connections: on the front: measuring device connection on the rear: USB connection to PC, menu key, pedal jack measurement data resolution: data button on the measuring device or cable with pedal timer function can be set from 0 to 99 s. For automatic transmission of the measured data to the application at defined intervals of time Delivery: USB interface, USB cable to the PC, adapter for foot-operated switch, operating instructions Designation Interface Opto-USB-0 Interface RS232-USB Ident. No O. R. Designation Accessories: Foot-operated switch and cable (2 m) Ident. No. 050 Unit price E O. R. h Connection cable for interface RS232-USB-1: Prod. Gr. 395 No and 200 page 903 No page 903 No page 904 Interface Opto-USB-0 with Vernier calliper TESA CAL IP67 and application MS-Excel Interface RS232-USB-1 Keyboard interface T-Box 305-USB software-neutral interface, which enables the transmission of measured data from one or more digital measuring devices to any applications connected to the PC through the USB keyboard connection, the keyboard can be used immediately, no special drivers are required supports the connection of various digital measuring devices from HAHN+KOLB and other manufacturers. supports the connection of up to 5 measuring instruments (interface formats Opto RS232, RS232) use of the connection cable of the corresponding manufacturer required functions, such as final mark, timer, decimal character, multiple measurement and language can be set via menu key activation of measured values, by (optional): PRINT/DATA button on measuring device (if provided) centrally using the foot switch connected to the T-Box timer function can be set from 0 to 99 s. For automatic transmission of the measured data to the application at defined intervals of time combination possibilities of several T-boxes (measured value actuation via pedal refers to the respective T-box only) Scope of delivery: Ident. No. 305 T-Box 305-USB: includes connection cable, operating instructions Designation T-Box 305-USB Inputs/interface output (Digi-Log 2M only) 2x RS232/9polig 3x Digimatic T-Box 305-USB with examples of measuring devices that can be connected (max. 2x RS232) Designation Ident. No. U. pr. E Ident. No. U. pr. E 305 O. R. Accessories: Foot-operated switch and cable (2 m) 050 O. R. hrs232 Connection cable see page 903 and No page 904. Prod. Gr