TESA HITS QUALITY DRIVES PRODUCTIVITY

Transcription

1 TESA Hits Valid until Prices exclude VAT Version EN GBP TESA HITS QUALITY DRIVES PRODUCTIVITY 75 YEARS OF INNOVATION CELEBRATED WITH SPECIAL OFFERS

2 ELECTRONIC CALIPERS TWIN-CAL IP67 Highest IP67 protection against liquids and dust, also with a connected cable Large display and Soft touch features for great reading and usage comfort Bidirectional communication via cable or wireless module TWIN-CAL Same measuring system as the IP67 version Great reading comfort Bidirectional communication at the best price Thumb roller Depth rod TWIN-CAL IP TWIN-CAL IP TWIN-CAL IP TWIN-CAL IP TWIN-CAL IP TWIN-CAL TWIN-CAL TWIN-CAL TWIN-CAL TWIN-CAL IP67 TRIO-PACK Special 75th anniversary edition TWIN-CAL IP mm with round depth rod S TWIN-CAL IP67 TRIO-PACK Special 75th anniversary edition at a price equivalent to 77 per TWIN-CAL IP67 S TESA VALUELINE IP67 High degree of protection IP67 against dust and liquids Without data output The IP67 protection at the best price Thumb roller Depth rod TESA VALUELINE IP TESA VALUELINE IP TESA VALUELINE IP TESA VALUELINE IP TESA HITS Quality drives productivity

3 TESA Hits TWIN-CAL IP67 MODELS WITH ROUNDED MEASURING FACES FOR INTERNAL DIMENSIONS AND KNIFE-EDGE JAWS FOR EXTERNAL DIMENSIONS Highest IP67 protection against liquids and dust, even with a connected cable Large display and Soft touch features for great reading and usage comfort Bidirectional communication via cable or wireless module A B C DATA-DIRECT / STAT-EXPRESS SOFTWARES DATA-DIRECT Transfer the measurements to Excel or to a data base Real time display of measured results (except Rf-USB) Date, time and identification of the instrument, in addition to the measured value Export of data to.csv file STAT-EXPRESS A Creation of measuring protocols Calculate statistics and XR control charts in real time Backup and print out various measurement reports PASS/FAIL classification on the TWIN-CAL display DATA-DIRECT software included C B DATA-DIRECT STAT-EXPRESS DIAL CALIPERS TESA CCMA-M Exceptional long-life thanks to the exclusive TESA shockproof system Robust construction with metal body and protection of the metal rack Easy reading with large, high contrast dial Travel/revolution Resolution TESA CCMA-M 0,02 mm , TESA CCMA-M 0,01 mm ,

4 MICROMETERS TESA ISOMASTER Thimble with friction drive for one-hand use Release the friction drive by sleeve reversing Slanted full millimeters to eliminate reading Resolution , , , , TESAMASTER Unique numerical tenth of millimeter reading Parallax free reading Accuracy twice as good as DIN863 Resolution , , , , MICROMASTER IP54 30 mm Large easy-to-read digital display SCS calibration certificate included Resolution , , , , MICRO-ETALON 225 PRECISION MICROMETER WITH A DIAL INDICATOR The nominal dimensions are set on the micrometer while deviations are read on the dial indicator Benchmarks tolerances of the adjustable indicator in 2 colours for a quick check Retractable anvil by means of a push-button Inserts Standard inserts Standard inserts Pointed inserts MICROMETER SUPPORT Micrometer support TESA HITS Quality drives productivity

5 INTERNAL MICROMETERS TESA IMICRO CAPA µ SYSTEM WITH DIGITAL DISPLAY Unique design guaranteeing the best metrological conditions for your measurements, even in great depths No influence of temperature variation on the measurement TESA Hits Resolution Repeatability limit , , , , , , , , , , , , , , , , ETALON INTALOMETER 531 Exceptional ability to measure the bottom of bores thanks to the measuring inserts that go over the front face of the instrument Self-centering of the instrument Precision better than DIN863 Resolution Repeatability limit , , ,5 0, ,5 10 0, ,5 0, ,5 15 0, ,5 0, ,5 20 0, , , , , , , , , , ,

6 LEVER-TYPE DIAL TEST INDICATORS AND ANALOGUE DIAL GAUGES TESATAST STANDARD MODELS Continuous clockwise pointer rotation providing error-free reading High accuracy and very low measuring force of the jewelled movement with 7 rubies Durability thanks to its patented shockproof system; insensitive to magnetic fields Reading Dial (Ø mm) ,8 0, ,8 0, ,5 0, ,5 0, ,2 0, ,2 0, S ,2 0, INTERAPID 312 LEVER-TYPE DIAL TEST INDICATORS Large measuring span with pointer totalling the of revolutions for safe reading Bidirectional measuring for total flexibility of measuring direction Jewelled movement with rubies Reading Dial (Ø mm) ,6 0,01 37, ,6 0, ,4 0,002 37, ,4 0, ETALON MODELS 0,01 mm models particularly cost effective Reading Dial (Ø mm) , , MEASURING STAND INTERAPID SUPPORT Excellent compromise between small volume and adhesion force (220N) Small magnetic support INTERAPID UJ 15* * supports are delivered without measuring instrument and without base. 6 TESA HITS Quality drives productivity

7 ELECTRONIC DIAL GAUGES TESA Hits TESA DIGICO Dimensions, graduation and tolerance markers of a mechanical dial gauge Linearity and functionalities of an electronic indicator Rotating dial Numerical scale interval DIGICO 205 MI 12,5 0, DIGICO 305 MI 12,5 0, DIGICO 405 MI Tolerances 12,5 0, DIGICO 410 MI Tolerances 25 0, DIGICO 505 MI Tolerances 12,5 0, DIGICO 505 MIP Tolerances IP62 12,5 0, DIGICO 605 MI Tolerances and memorisation 12,5 0, DIGICO 610 MI Tolerances and memorisation 25 0, DIGICO 705 MI For internal measurement 12,5 0, MEASURING FOR LARGE DIMENSIONS TESA UNIMASTER Portable instrument, particularly suitable when large parts cannot be transported in measuring laboratories, especially during maintenance on site Instrument «two in one» for internal and external measurement The setting standard included in the carrying case allows to save the cost of bulky and expensive reference parts TESA UNIMASTER full set int: ext:

8 ELECTRONIC LENGTH MEASURING EQUIPMENT USB PROBES Using an interface housing becomes redundant: direct connection to USB port of PC Communication by sending ASCII commands possible TSIP software is included in the supply and allows: - display of up to 4 USB probes - possibility to indicate tolerances - reset to facilitate comparative measurement - functions +A, +B, -B, +A+B and +A-B - automatic acquisition at set interval - export of results in.xml file Repeatability limit Degree of protection GTL 21 USB ± 2 0,4 + 0,8 L 0,1 IP GTL 22 USB ± 2 0,4 + 0,8 L 0,1 IP GT 61 USB ± 5 0,8 + 0,8 L 0,24 IP GT 62 USB ± 5 0,8 + 0,8 L 0,24 IP GTL 222 USB ± 1,5 0,4 + 0,8 L 0,1 IP GT 622 USB ± 5 0,8 + 0,8 L 0,24 IP ADAPTER CABLE DIN 5P CONNECTOR TO USB TYPE A CONNECTOR To allow the connection of a standard TESA inductive probe to a USB port of a PC Compatible with the TSIP software (free, on request) Adapter cable DIN 5p to USB for ± 2 mm probes and GT 31 ± Adapter cable DIN 5p to USB for ± 5 mm probes ± TESATRONIC Adapter cable DIN 5p to USB TSIP software Probe with DIN connector or Probe with USB connector 8 TESA HITS Quality drives productivity

9 DISPLAY UNITS FOR STANDARD PROBES TESA Hits TESATRONIC TWIN-T10 Independent and robust display unit Large screen facilitating a clear and immediate reading MAX, MIN, MAX-MIN functions and tolerances Analogue scale for detailed segmentation Exceptional operational autonomy TESATRONIC TT20, TT60 AND TT80 Display units for TESA inductive probes: 2 probe inputs 7 measuring s Resolution 0,10 µm Output signals by relay for 1 correct class RS232 output Supply mains In addition to the TT 60: Memory Dynamic measurement Output signals by relay for 5, 10, 20 or 40 correct classes Analogue port In addition to the TT 80: - Resolution 0,01 µm - Numerical interval 0,01 µm for all scales TESATRONIC TTA20 Analog display with mirror effect for reading without parallax 2 probe inputs: +A, -A, +B, -B, +A+B, +A-B 6 metric and inch measuring s Zeroing potentiometer for adjusting the display Potentiometer for setting the tolerance limits Switch for blocking or unblocking of the displayed value Analog output to a display unit or external recording Number of probe inputs Resolution Memory MAX, MIN, MAX-MIN Analog output (V) TESATRONIC TWIN-T TESATRONIC TT TESATRONIC TT TESATRONIC TT TESATRONIC TTA min. ± 5 μm max. ± 5 mm min: ±5 / max: ±5000 min: ±5 / max: ±5000 min: ±0,5 / max: ±5000 0, ,1 / 0, ,1 / 0, ,01 / 0, min: ± 3 / max: ±

10 HEIGHT GAUGES TESA-HITE MAGNA 400/700 Suitable for usage in the harshest environments thanks to the patented system (Magna µ Sytem) Easy-to-use height gauge designed for fast and reliable 1D measurements Exceptional operational time of more than 60 hours SCS calibration certificate included TESA-HITE 400/700 Easy-to-use height gauge designed for fast and reliable 1D measurements Exceptional operational time of more than 60 hours SCS calibration certificate included FREE FREE S S ø14 ø6 ø ø6 ø6 ø2 55 Application Repeatability limit S TESA-HITE magna free accessory set < 8 On plan: 2 = < 3 ; Into bore: 2 = < S TESA-HITE magna free accessory set < 8 On plan: 2 = < 3 ; Into bore: 2 = < S TESA-HITE free accessory set (2,5+4L) (L in m) On plan: 2 = < 2 ; Into bore: 2 = < S TESA-HITE free accessory set (2,5+4L) (L in m) On plan: 2 = < 2 ; Into bore: 2 = < TESA HITS Quality drives productivity

11 TESA Hits TESA-µHITE Low probing force adapted to pieces of small dimension Compact, for measurements within the production area High precision instrument SCS calibration certificate included Application Repeatability limit TESA-µHITE Coaxial insert: 1,0 Offset insert: 2,0 Coaxial insert: 0,5 Offset insert: 1, h3 h1 h2 h4 h1 h2 h3 h4 h1 h2 ø2 ø1 h3 = 0 = h2 h1 b h1 h2 h4 b2 b1 h3 Measurement with change of the probe direction. Probe constant included, considering the culmination point Measurement with change of the probe direction. Probe constant included, disregarding the culmination point Parallelism error Run-out error «max «min» «max»-«min» 11

12 TESA VERIBOR BORE GAUGES TESA VERIBOR 2 points comparative measuring instruments with wide application for bores from 4,5 to 550 mm High precision guaranteed with no mechanical play in the system that would result in transmission on the indicator (dial gauge or probe) Centering shoe for correct alignment of the instrument into the bore Insensitivity to temperature difference through the body of the tool made of steel (invar) that ensures a good stability of measurements TESA VERIBOR 4, TESA VERIBOR 6 12, TESA VERIBOR TESA VERIBOR TESA VERIBOR TESA VERIBOR TESA VERIBOR Sets dilivered without dial gauge, electronic probe or TESATRONIC. MOTORISED SETTING BENCHES TESA TPS 300/500/1000 Replace a large of setting standards like ring gauges and gauge blocks which are usually needed to check 2-point bore gauges, dial gauges, internal and external micrometers Simple and quick use: enter the value and the motorized carriage is positioned at the required dimension Reliable and robust concept for the workshop 100 setting values can be stored in the TPS TESA HITS Quality drives productivity Interior application Exterior application TESA TPS 300 * 0, ,5 + L / TESA TPS 500 * 0, ,5 + L / TESA TPS 1000 * 0, ,5 + L / * TPS delivered without instruments

13 STRAIGHTNESS, ANGLE AND INCLINATION MEASUREMENT TESA CLINOBEVEL 1 USB Compact, light and robust ± 45 and 4 measuring faces Supplied with CLINOSOFT software and USB cable to the computer TESA Hits CLINOSOFT allows viewing and storage of measures and the creation of measuring reports in Excel ( ) (mm/m) Dimensions TESA CLINOBEVEL 1 USB ± 45 0, x 75 x TESA SQUARE LEVEL For inspecting and aligning flat or cylindrical surfaces (Ø mm) 2 prismatic measuring faces with the vertical measuring face having magnetic inserts Cross vial for an easy adjustment Resolution (mm/m) Dimensions TESA square level 0,02 DIN 2276 / x 150 x TESA circular level 0,3 DIN 2276 / 1 Ø 60, H TESA circular level 2 5 DIN 2276 / 1 Ø 40, H TESA NIVELTRONIC Analogue display with precision needle galvanometer 2 switchable measuring s: ± 0,75 mm/m, ± 150 (scale interval = 0,05 mm/m, 10 ) ± 0,15 mm/m, ± 30 (scale interval = 0,01 mm/m, 2 ) For the inspection and alignment of vertical and horizontal surfaces Solid cast iron body with faces engraved by hand ensuring accurate support The square model has 2 prismatic bases for shafts Ø 20 to 120 mm Dimensions Square TESA NIVELTRONIC DIN 2276/2 200 x Horizontal TESA NIVELTRONIC DIN 2276/2 150 x

14 SURFACE ROUGHNESS TESTING NEW: ALL THE RUGOSURFS ARE DELIVERED WITH A R = 2 µm, 90 PROBE TESA RUGOSURF 20 in the Z-axis of 400 µm Very easy to use Measurement of the 15 most frequently used roughness parameters Storage of the last 20 results with graphic TESA RUGOSURF 10G in the Z-axis of 400 µm 3 horizontal measuring positions of probe -90, 0 and roughness parameters with primary profile and roughness profile Colour LCD screen RUGOSOFT SOFTWARE For RUGOSURF 20 and 10G Import stored measurement values from the device Detailed visualization of the parameters, profiles (R roughness and P primary) Statistical analyses Customized measurement report DOT MATRIX PRINTER FOR RUGOSURF For RUGOSURF 20, 10G and 90G Standalone printer with integrated battery Prints measured parameters and roughness profiles, including measurement data stored in the RUGOSURF memory TESA RUGOSURF Cable RUGOSURF 20 to the PC TESA RUGOSURF 10G Cable RUGOSURF 10G and 90G to the PC RUGOSOFT software mm extension Printer for RUGOSURF TESA HITS Quality drives productivity

15 TESA Hits TESA RUGOSURF 90G in the Z-axis 1000 µm 3 horizontal measuring positions of probe Adjustable vertical measuring position up to H=90 mm 49 roughness parameters with waviness profile, primary profile and roughness profile Tactile LCD/TFT 3,5 colour screen New! Included in the contents of the delivery: - Probe R=2 µm, 90 special 2 in 1 with removable pad: to measure waviness (without) or roughness (with) - report RUGOSURF 90G - Calibration certificate for roughness standard Ra=2,97 µm TESA PROFILE SET 2 mm Convert the RUGOSURF 90G into a profile-measuring tool with a measuring of 2000 µm in the Z-axis To measure lengths, radii and angles of a part Delivery contents: - Profile setting master with measuring repport - PROFILE STUDIO software included - SB2000 probe for profile measurements - RUGOSURF 90G cable to PC ( V3) MEASUREMENT STUDIO SOFTWARE For RUGOSURF 90G Import stored measurement values from the device Detailed visualization of parameters and waviness W, roughness R and primary P profiles VDA parameters Statistical analyses Customized measurement report TESA RUGOSURF 90G TESA PROFILE SET 2 mm MEASUREMENT STUDIO software

16 TESA 75 YEARS OF INNOVATION With the strength of its 75 years of history, TESA has a lasting impact on metrology through its many innovations. Since its first measuring instrument developed in 1941, the Swiss company has evolved over time with advanced technologies. Renowned flagship products which made and continues to make the history of TESA today, like CCMA dial calipers, the UNIMASTER large dimension gauge, TESATAST level indicators, the IMICRO internal micrometer and our 1D probes, have been a standard in workshops for many decades. With the evolution of digital communication and the arrival of the Industry 4.0, TESA innovates equally with some bidirectional communication systems between the instrument and the PC. Data can now be sent directly to a software and converted into a usable information. TESA is also a manufacturer of tactile and non-contact probing solutions for Coordinate Machines. Available through the worldwide sales network of Hexagon Manufacturing Intelligence, these products represent the high end of a technical know-how top-end model. Being part of its DNA, innovation and creation of advanced technologies distinguish the Swiss company since its foundation. Stay tuned for more TESA innovations! Modification rights reserved TESA Technology Bugnon 38 CH-1020 Renens Switzerland Tel. +41(0) Fax +41(0) tesa-info@hexagon.com