TSH8 Quick Start VIEWSIZE THE WORLD

Transcription

1 VIEWSIZE THE WORLD TSH8 Quick Start Compatible with all kinds of sending cards, 8 install full-color LED sending card slot System integration, ingeniously designed, which adopts board pluggable structure Adopts air cooling processing, energy conservation and environmental protection Signal adaptive matching design to solve the problem of high resolution interference and out of sync when distribute signal Point-to point correction technology allows the manufacturers to relax the requirements in LED brightness and color, which reduce the purchasing cost

2 CONTENT Product Introduction... 2 Packing Configuration... 3 Hardware Orientation... 4 Back Panel... 4 Operating Instruction... 5 How to Connect... 5 How to Work... 5 Sending Card Installation... 6 Contact Information

3 Product Introduction TSH8 is ingeniously designed, adopts board pluggable structure, which can built in 8 install full-color LED sending card slots (4 sending card slot for Nova MSD600). It compatible with all kinds of sending cards, including Linsn 801/802, Nova MSD300, Nova MSD600, Mooncell, Colorlight IT7 and DBstar Q2011, etc. The signal adaptive matching design can solve the problem of high resolution interference and out of sync when distribute signal. TSH8 adopts air cooling processing energy conservation and environmental protection, it can meet the demands of current LED screen control. System Connection RGBlink offers solutions to demanding technical problems. Any application questions, or required further information, please contact with our customer Support Engineers. TSH8 System Connection Diagram 2

4 Packing Configuration Power Cord Antistatic Bag Certification Note: Chinese Standard, American Standard or European Standard power cord is option. 3

5 Hardware Orientation Back Panel NO. INTERFACE NO. INTERFACE 1. 3 Output of Sending Card 5 Power IEC-3 Port 2. 4 DVI Input Port of Sending Card 6 Switch 4

6 Operating Instruction How to Connect Operation steps are as follows: 1. Connect the device or computer with DVI interface to the DVI input interface of sending card in the first row of TSH8 with the DVI cable. 2. Connect the outputs of sending card in the first row of TSH8 to LED display with the network cable. 3. Plug into power cord with IEC connector. Same connections for the second row, the third row and the fourth row interfaces. How to Work Push the power button to the ON position, and input DVI signal to DVI inputs of sending card, then the outputs of sending card will output the signal to LED display: 5

7 Sending Card Installation TSH8 supports the sending cards include the following: Sending Card Type Sending Card Model Linsn 801, 802 Nova Mooncell Colorlight DBstar MSD300 MSD600 VCMA7-V30 IT7 Q2011 We will introduce the sending card installation in the following parts. The installation steps of Linsn 801/802, Nova MSD300, Colorlight IT7 and DBstar Q2011 sending card are the same, take Linsn 801 for example, specific steps are as follows: 1. Choose any sending card block (commend choose the first row or the third row on both sides of the sending card block, as default binding the power cords in these positions), and unscrew the captive screws, then pull out the sending card block, as shown in figure 1: (Figure 1) 6

8 2. Untie the power cords, and unscrew the fixed screws on sending card block, as shown in figure 2: (Figure 2) 3. Put Linsn 801 sending card into the sending card block and fix it with 2 fixed screws, as shown in figure 3: 7

9 (Figure 3) 4. Plug the power cord into the sending card, and push the sending card into the device along the slide rail, then screw the captive screws, as shown in figure 4: (Figure 4) Note: It needs the power adapter when install the Mooncell sending cards, as shown in figure 5, the install steps are the same as above. (Customers are advised to purchase the power adapter as we will not provide it, and the salesman must list it explicitly in the order. Should you have any further queries, please contact our salesman.) 8

10 Power adapter Power interface (Figure 5) The install steps for Nova MSD600 are the same as above, but the following 3 points need to be noted: 1. Before install the Nova MSD600 sending card, user should unscrew the 12 fixed screws on the side panels (6 pieces each side), and remove the top panel, as shown in figure 6: (Figure 6) Then move the unilateral fixed groove on the base panel from position 1 to position 2 (As the circuit board of Nova MSD600 is wider than other sending cards, the purpose of moving the unilateral fixed groove is to increase the sending card installation width. User can also move the other unilateral fixed groove, according to the install quantity of sending card. Assemble the top panel when complete. As shown in figure 7. 9

11 Position 1 Position 2 (Figure 7) 2. It needs the Nova MSD600 block (Customers are advised to purchase the Nova MSD600 block as we will not provide it, and the salesman must list it explicitly in the order. Should you have any further queries, please contact our salesman.), and fix the Nova MSD600 sending card to the block with fixed screws, as shown in figure 8: (Figure 8) 3. It needs the power adapter (Customers are advised to purchase the power adapter as we will not provide it, and the salesman must list it explicitly in the order. Should you have any further queries, please contact our salesman.), and connect to the power interface with the dedicated power cord of Nova MSD600, as shown in figure 9: 10

12 Power interface (Figure 9) The picture after install can be seen in figure 10: (Figure 10) 11

13 Contact Information Warranty: All video products are designed and tested to the highest quality standard and backed by full 3 years parts and labor warranty. Warranties are effective upon delivery date to customer and are non-transferable. RGBlink warranties are only valid to the original purchase/owner. Warranty related repairs include parts and labor, but do not include faults resulting from user negligence, special modification, lighting strikes, abuse(drop/crush), and/or other unusual damages. The customer shall pay shipping charges when unit is returned for repair. Headquarter: S603~604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C Tel: Fax: Customer Hotline: Web: ~ ~ support@rgblink.com 12