STYX network. Electronic scoring systems. Installation Start-up Function control / updates / support

Transcription

1 Start-up Function control / updates / support SIUS AG Im Langhag 1 CH-8307 Effretikon Switzerland Phone info@sius.com

2 Table of contents STYX/LON hybrid network overview 3 Description and connectors of components 4 8 STYX cables 9 Target line 10 Lane scoreboards 11 Firing line 12 Segment control (10-Lane-Command-Desk) 13 Control room 14 Rack SR01 structure and cabling Page Start-up - pending 18 Function control / updates / support - pending Table of contents 2

3 overview Segment with 20 lines Weitere Lane Scoreboards Weitere Segmentkontrolle Legend LON 110V 240V LON-Backbone USB Ethernet STYX Target line Firing line Lane scoreboards Segment control Control room STYX/LON hybrid network 3 overview

4 components Pos. 1 SNC01 connector The connector connects maximally 5 devices (targets or lane scoreboards) with the network. The installation should be made at an easily accessible place protected from ammunition fragments (e.g. in a cable duct) in the middle of the devices to be connected. In a STYX segment maximally 4 SNC01 connectors (for 20 devices) can be linked together. Following STYX segments must be connected separately direct to the rack in the control room. SPS01 Power supply (48V) STYX device 1 STYX device 2 STYX device 3 STYX device 4 STYX device 5 Do not remove the existing protective covers of unused channels. From SNC02 connector (rack/control room) or previous SNC01 connector To next SNC01 connector Control lamps Pos. A1.1 SPS01 power supply for connector Power supply for SNC01 connector and devices connected to it, equipped with a country-specific device plug and a corresponding connection cable. Link (green) = connection with device Device plug (power supply) Max (orange) = max. data speed Err (red) = error On (green) = power To SNC01 STYX network connector Pos. Article no. Description components 1 SNC01 connector (for max. 5 targets resp. lane displays), Dimensions (WxHxD): 283x41x43mm, Weight: 0,5kg 1.1 SPS01 Power supply for connector 48V/5A, Dimensions (WxHxD): 220x40x68mm, Weight: 1,3kg Country-specific power supply cable > AA1** components 4 Description and connectors

5 Pos. 2 STE01 adapter STYX to ethernet Pos. 3 STL01 converter STYX to LON This adapter enables the connection of printers resp. PC s/laptops to the STYXnetwork. The converter is the interface from the STYX to the LON network. By using it, devices, which only have a LON connector can be integrated in the network. Connector Control lamps Connector ethernet (to printer/ PC/laptop) Watchdog (green) = function monitoring Wink (green) = device identification Link (green) = connected to LON network LON connector STYX connector ACT (orange) = communication activity Pos. 4 SLS01 STYX lane scoreboard The SLS01 STYX lane scoreboard receives the data of the according lane and sends those as a video signal to the connected screen TV. LON connector (not in use) STYX connector (from SNC01 connector) HDMI (to connected screen TV) Pos. Article no. Description components 2 STE01 Adapter STYX to Ethernet, Dimensions (WxHxD): 69x44x40mm, Weight: 0,2kg 3 STL01 Converter STYX to LON, Dimensions (WxHxD): 205x53x160mm, Weight: 0,6kg 4 SLS01 STYX lane scoreboard incl. dowels/screws for wall mounting, Dimensions (WxHxD): 205x53x160mm, Weight: 0,6kg components 5 Description and connectors

6 Pos. 5 SR01 Rack 19" master, connector, server and the optional UPS (uninterruptible power supply) can be placed in the rack. The rack is equipped with removable side panels on both sides which enables easy access, even with already mounted devices. The rack has openings on top, bottom and in the rear for cable routing. The cover plates can be broken out. top rear bottom Mounting to a wall: In the rear the rack is equipped with a mounting bracket, which enables the mounting to a wall. The mounting bracket is fixed with screws to the rack. These must be removed from inside of the rack. The mounting bracket can be removed now. It can be mounted with screws and dowels at the required height to the wall. The rack can be hooked up to the mounting bracket on the wall. Finally affix it with the screws from inside of the rack. Pos. Article no. Description components 5 SR01 Rack 19" incl. 6 way power distribution cable, Dimensions (WxHxD): 600x450x505mm, Weight: 16kg Country-specific power supply cable > AA1** components 6 Description and connectors

7 Pos. 5.1 SNC02 connector 19" The SNC02 connector 19" is placed in the rack and establishes the connection with all used STYX devices in the network. If not enough free channels are available, further SNC02 connectors can be connected. STYX segments (of 20 targets / lane scoreboards) must be connected in ascending order, i.e. STYX segment 1 (1 20) > STYX segment 2 (21 40) > STYX segment 3 (41 60) etc. Opening for cable (power supply) from behind Power supply STYX device 1 STYX device 2 STYX device 3 STYX device 4 STYX device 5 From SNM01 master or previous SNC02 connector (rack / control room) To SNS01 server or next SNC02 connector Control lamps: same as SNC01 connector (see page 5). Pos. 5.2 SNS01 server The SNS01 server is placed in the rack. It saves and manages all data and services. PC/laptop (SIUS support) USB STYX connector (to «Out» connector of SNC02 connector) Power supply 110V / 230V Pos. Article no. Description components 5.1 SNC02 STYX-Network-Connector 19" inkl. Montageschrauben/-muttern, Masse (BxHxT): 482x43x220mm, Gewicht: 2kg 5.2 SNS01V2 server «Infrastructure» (Infrastruktur) incl. mounting screws/nuts Dimensions (WxHxD): 482x43x220mm, Weight: 1,5kg SNS01V3 server «Themelia» (Scheiben) incl. mounting screws/nuts Dimensions (WxHxD): 482x43x220mm, Weight: 1,5kg SNS01V4 server «Kanopus» (Lane Score Boards) incl. mounting screws/nuts Dimensions (WxHxD): 482x43x220mm, Weight: 1,5kg SNS01V1 server (spare, unconfigured) incl. mounting screws/nuts Dimensions (WxHxD): 482x43x220mm, Weight: 1,5kg Country-specific power supply cable > AA1** components 7 Description and connectors

8 Pos. 5.3 SNM01 STYX-Network-Master The SNS01 master is placed in the rack. It manages the network and the adressing of the devices. The ethernet connector enables the access to the internet. PC/Laptop (SIUS support) Ethernet (internet access) Actually not in use STYX connector (to «In» connector of SNC02 connector in rack / control room) Power supply 110V / 230V Pos. 5.4 UPS001 uninterruptible power supply (option) We recommend the installation of an UPS001 (needed for ISSF competitions). It secures an uninterruptible power supply for all devices in the rack and protects from data loss. PC/Laptop (SIUS support) Telephone / Overvoltage protection for network Power supply (UPS001) Power supply (to devices) Pos. Article no. Description components 5.3 SNM01 master incl. mounting screws/nuts, Dimensions (WxHxD): 482x43x220mm, Weight: 1,5kg 5.4 UPS001 Uninterruptible power supply (option) 450VA/280W, incl. brackets and mounting screws Country-specific power supply cable > AA1** components 8 Description and connectors

9 KSN001 STYX cables The cables are equipped with a female connector and a male connector. The maximum distance from a network connector to another network connector is 130m (2x65.0m cable). If the distance is larger then 130m, an additional connector must be connected = connector > 2x65.0m cable > connector > required extension cable. 6mm Female Male 15mm The following cables (lengths) are available: KSN STYX cable 0.7m KSN001-2 STYX cable 2.0m KSN001-3 STYX cable 3.0m KSN STYX cable 10.0m KSN STYX cable 20.0m KSN STYX cable 40.0m KSN STYX cable 65.0m components 9 STYX cables

10 target line The cabling of the targets is made according to the illustration below. The targets LS25/50 are equipped with a STYX connection cable, which also provides the power supply STYX cable 2.0m KSN STYX cable 0.7m KSN STYX cable 0.7m KSN STYX cable 2.0m KSN STYX Power supply SPS01 STYX cable 7m KSN001-7 connector SNC01 to connector SNC01 (next 5 lines) STYX cable 65m KSN to connector SNC01 (Segment control / TLCDBOX) 5 targets can be connected to a single connector SNC01. The connector SNC01 should be placed well protected (e.g. in a cable duct) in the middle of these 5 targets. The provided STYX connection cable of the targets is 1,4m long. Depending on the situation, extension cables are needed. The outer targets on either side (1+5 / 6+10 etc.) need an extension cable of min. 2.0m. Both inner targets (2+4 / 7+9 etc.) need an extension cable of min. 0.7m. The individual connectors SNC01 has to be connected. It is possible to connect a maximum of 4 connectors SNC01 to a STYX segment (= 20 targets). and cabling can differ. The according installation plans are relevant. 10 Target line

11 160 (39) lane scoreboards The cabling of the lane scoreboards is made according to the illustration below. The TV screens / HDMI cables are (if not ordered from SIUS) not included in delivery and must be provided by the customer himself TV screen lane scoreboard HDMI cable STYXlane scoreboard SLS01 STYX cable KSN001-L* (L*=length) STYX power supply SPS01 STYX cable 7m KSN001-7 connector SNC01 to connector SNC01 (next 5 lines) STYX cable KSN001-L* (L*=length) to connector SNC02 (rack / control room) 5 STYX lane scoreboards SLS01 can be connected to a single connector SNC01. The connector SNC01 should be placed well protected (e.g. in a cable duct / behind a panel) depending on the situation. The length of the cables depends on the placement of the devices. The individual connectors SNC01 has to be connected. It is possible to connect a maximum of 4 connectors SNC01 to a STYX segment (= 20 lane scoreboards). The first connector SNC01 of a segment has to be connected to the connector SNC02 (rack/ control room). Wall mounting STYX lane scoreboard SLS01 (44.5) (44.5) 54 The device has 2 openings on the bottom side. It can be mounted to a wall with the provided dowels/screws. and cabling can differ. The according installation plans are relevant. 11 Lane scoreboards

12 firing line (control units) The cabling of the SA951 control units is made according to the illustration below. It is a standard LON cabling of 10 control units, which has to be connected with the segment control (10 lane command desk). Terminator KL001-R Y cable KL013 Power supply NT211 LON cable 2m KL LON cable 2m KL T adapter KL001-T LON cable 2m KL Line 1 Line 2 Line 3 Line 4 Line 5 Line 10 Barcode scanner AAG133-80SX LON cable KL001-L* (L*= length) Remote control RC211 Line printer D112-USB-N to segment control (10 lane command desk) and cabling can differ. The according installation plans are relevant. 12 Firing line (control units)

13 segment control (10 lane command desk) The cabling of the segment control is made according to the illustration below. It is a combination of STYX and LON cabling. To control units (firing line) LON cable KL001-L* (L*=lenght) LON cable 1m KL STYX to LON converter STL01 LON cable 1m KL Terminator KL001-R To connector SNC01 (target line) or next TLCDBOX To connector SNC02 (rack/control room) or previous TLCDBOX STYX cable 20m KSN STYX cable KSN001-L* (L*=lenght) Terminator KL001-R Router RTR5000 STYX cable 0.7m KSN STYX to ethernet adapter STE01 connector SNC01 10 lane command desk To next TLCDBOX STYX power supply SPS01 Legend: LON / LTW network Ethernet/USB/HDMI of devices inside the TLCDBOX Devices are cabled according to picture below and then placed in the TLCDBOX. and cabling can differ. The according installation plans are relevant. 13 Segment control (TLCDBOX)

14 control room The cabling of the control room is made according to the illustration below, but can differ depending on the circumstances and the size of the installation. We recommend internet access for broadcasting and support. To segment control (TLCDBOX) LON cable KL001-L* (L*=lenght) Rack 19" SR01 1x master SNM01 3x connector SNC02 3x server 1xSNS01V4, 1xSNS01V3, 1xSNS01V2 STYX to ethernet adapter STE01 STYX cable KSN001-L* (L*=lenght) SNI T-Adapter KL001-T To segment control (TLCDBOX > targets) Segment 01 (01 20) Segment 02 (21 40) Segment 03 (41 60) Segment 04 (61 80) To lane scoreboards Uninterruptible power supply UPS001 4 x STYX cable 4 x KSN001-L* (L*=lenght) 4 x STYX-Kabel 4 x KSN001-L* (L*=lenght) Ethernet cable AA203-L* (L*=lenght) STYX to ethernet adapter STE01 Internet access I-Adapter fem-fem KL001-I Terminator KL001-R Central computer (SIUSDATA/SIUSRANK) Legend: LON / LTW network Ethernet/USB Access to the Internet is provided by the STYX Network Master SNM01. The Ethernet connection of the central computer is exclusively for the (Ethernet DHCP network setting) and is connected via the STE01 adapter. The computer may not be logged in to an additional LAN (e.g. via second Ethernet connection, USB adapter, WiFi etc.). If data exchange between central computer and further devices is requested, it must be done via internet cloud as Dropbox, icloud, GDrive etc., cabling and number of devices can differ. The according installation plans are relevant. 14 Control room

15 Structure and cabling of rack SR01 The rack is delivered assembled (without devices). For wall mounting > see page 6. Screws/nuts/angles for the installation of the devices are included. The side panels can be removed by simultaneously pressing both locking buttoms inwards. Depending on local circumstances the attaching of the door can be changed (left/right side of the rack). The enclosed SIUS sticker can be placed in front on the glass door. If installing the optional UPS001 for an uninterruptible power supply, the mounting angles must be screwed to the bottom rails first. The position of the device should ensure that the glass door of the rack still can be closed. Side view: 4x 8x The mounting rails for the devices are premounted at the 6th hole of the bottom rails. That ensures that in front is sufficient space for cable routing. With the provided screws and nuts the devices can be attached to the mounting rails. The number of required devices depends on the size of the installation. Screw the UPS001 to the mounting angles. Arrangement of devices from top to bottom: 1x SNM01 master 3x SNC02 connector 3x SNS01 server Option: UPS001 uninterruptible power supply 7x 15 Rack SR01 structure

16 top The rack has openings on top, bottom and in the rear for cable routing. The cover plates can be broken out. rear Remove the cover plate of the requested opening ➊ for cable routing. bottom ➋ The cables can be connected according to the illustration. Front view: To modem (control room) for internet access To segment control (TLCDBOX > targets) A B C D To lane scoreboards F G H I 4x 4x A B C D F G H I E K Cables of STYX segments (of 20 targets / lane scoreboards) must be connected in ascending order to the Network Connectors. A > B > C > D > E > F > G > H > I > K etc. It is possible to connect targets and lane scoreboards to the same Network Connector. This must be done in ascending order. Network Server «Kanopus» (Lane Score Boards) To socket Network Server «Themelia» (Targets) Network Server «Infrastructure» (Infrastructure) To printer (control room) To central computer (control room) Power supply from UPS001 Power supply from 6 way distribution cable AA377 STYX cable Ethernet cable (to modem for broadcasting and online support) 16 Rack SR01 cabling

17 Cable routing The 6 way distribution cable A377 for power supply is included. It can be attached with the provided cable tie The cables can be routed/attached according to the examples laterally to the mounting rail. shown below. Geräte Steckdose Rear view (power supply): To socket Power supply from UPS001 Power supply from 6 way distribution cable AA Rack SR01 cabling-

18 Start-up / function control / updates / support pending

19 - 19 -

20 SIUS worldwide There are SIUS representatives all around the globe. Find your local SIUS sales partner here: > contact 20