Gamp Connections. Connection of GAMP 0183 to onboard instrumentation 2.1 7/2015

Transcription

1 Gamp Connections Connection of GAMP 0183 to onboard instrumentation 2.1 7/2015

2 INDEX esa DONGLE Wi- Fi general aspects H3000 B&G to dongle esa 3 4 GAMP ESA Wi- Fi general aspects H3000 B&G H3000 B&G 2000 Performance H3000 B&G 2000 Display FFD H5000 B&G TRIDATA E MULTI ST 50 AUTOHELM MULTI ST 60 RAYMARINE TRIDATA ST 60 RAYMARINE (RAYMARINE GENERAL) Wi- Fi RAYMARINE/TakTiCK NEXUS NX2 SERVER pag 2

3 esa DONGLE WiFi esa dongle Wi- Fi, is protected against reverse polarity, is not waterproof, it s easy to be connected to the equipment of the boat, it uses the data in NMEA 0183 format. It should be installed in an area where there are no shield for data transmission signal to antenna of the the receiving Apple device. Test the stability of the Wi- Fi connection in various positions to before completing the mounting. the DONGLE s output wires have the following functions and connections: Hardware Wire Red Blu Green Function DONGLE +12V GND Data IN To be c onnected to: +12V wiring/instruments Ground wiring/instruments RS232 OUT +, or NMEA out If the instruments uses a different language to NMEA Translator is r equired for example for Raymarine and NKE instrumentations Example of connection between Esa dongle and SeaTalk converter DONGLE Function Connector/converter Sea Talk Red +12V Sea Talk r ed ( +12V) Blue GND Sea Talk white ( GND) Verde Dati IN RS232 O UT +, o NMEA out N.B - esa app only works with GAMP e sa or e sa dongle. It sends data NMEA0183 via Wi- Fi. - Di seguito per I collegamenti illustrati al GAMP di Astra Yacht si applicano per il dongle le stesse regole collegando per il segnale solo il cavo verde e I due cavi di alimentazione pag 3

4 H3000 B&G a Dongle esa Power Cavo Dongle NMEA out Funzione DONGLE Box H3000 B&G Rosso +12V Power Term 1 (+12V) Blu GND Power Term 2 ( 0 V) Dati IN NMEA out Term 1 Verde pag 4

5 GAMP ESA Wi- Fi esa GAMP Wi- Fi, is protected against reverse polarity, is not waterproof, it s easy to be connected to the equipment of the boat, it uses the data in NMEA 0183 format. Note: GAMP does not interfere in any way with onboard instrumentation throug the NMEA IN connection. GAMP is IP54, not waterproof. Install GAMP in a place where there is no data transmission shield from the antenna to receiver apple device. Please test range and connection stability before final installation GAMP out wires have the following functions: Hardware GAMP function Red +12V Blue GND/- Green DataIN + Yellow DataIN - WARNING: If the instruments on board using a protocol other than NMEA 0183, you must use a "translator"; It will be necessary, for example, for instrumentation and Raymarine NKE, or in case the instrumentation is NMEA Sometimes the Wi- Fi transmission may disturb the GPS, if the GAMP Wi- Fi is positioned in the vicinity of the GPS antenna: check and possibly remove the two devices together, 1 meter of separation is generally sufficient. pag 5

6 H3000 B&G to Gamp nmea 0183 esa Power NMEA out pag 6

7 H3000 B&G 2000 Performance: is provided with NMEA 0183 Pg 4-15 manuale Blue 12V - Red 12V + Yellow NMEA - Green NMEA + pag 7

8 H3000 B&G 2000 Display FFD : is provided with NMEA 0183 Pg 4-18 manuale Connect together yellow and blue G amp to ground. Blue (GND) and Yellow (NMEA ) Red (+12V) Green (NMEA +) pag 8

9 H5000 B&G 1/2 pag 9

10 H5000 B&G 2/2 Power NMEA out pag 1 0

11 TRIDATA E MULTI ST 50 AUTOHELM Ref to link internet: Pg 17 manuale ST 50 Tridata, ground connection not required Pg 9 manual ST 50 Plus Multi, ground connection not required pag 1 1

12 MULTI ST 60 RAYMARINE is provided with NMEA 0183 Pg 8 and pg 24 m anual MULTI ST 60 ST 60 Multi connessione al GAMP pag 1 2

13 TRIDATA ST 60 RAYMARINE The instrumentation tridata Raymarine ST 60 has no connection NMEA, You m ust connect to a connector sea to talk NMEA 0183 Ref to internet NMEA0183 Accessories: pag 1 3

14 TRIDATA E MULTI ST 60 RAYMARINE: ref to Raymarine manual link: pag 1 4

15 Wi- Fi RAYMARINE/TakTiCK: system architecture connection to esa Esa pro Gamp esa Multiplexer wi- fi For example pag 1 5

16 Raymarine7/TackTic Wireless T122 Micronet Wireless interface pag 1 6

17 Raymarine Wireless T122 Micronet Wireless interface Esa pro Gamp esa Multiplexer wi- fi pag 1 7

18 NEXUS NX2 SERVER The Nexus NX2 server has a connection 0183: For power you can connect the GAMP to pins 1 and 2 of the server: c onnect the Connector1 server with Power + of GAMP and the connector 2 with Power - The signals for the NMEA 0183 connect connector 3 server with port NMEA1 in the GAMP terminal +, and the connector 4 server with NMEA1- pag 1 8

19 E A S Y H I G H T E C H N O L O G Y ASTRA YACHT SRL - PIAZZA DELLA REPUBBLICA MONFALCONE (GO) ITALY - TEL INFO@ASTRAYACHT.COM -