A8241. AiT Semiconductor Inc. APPLICATION ORDERING INFORMATION. Low 60mV Dropout at 20mA 4% LED Current Matching
|
|
- Arlene White
- 5 years ago
- Views:
Transcription
1 DESCRIPTION The is a CMOS based White/Blue LED driver with stand-alone capability. The driver is primarily designed for LED backlighting of LCD display powered by Li-ion battery with its high efficiency, low sandby current and wide range of input supply voltage. FEATURES Low 60mV Dropout at 20mA 4% LED Current Matching The is suitable for applications such as portable device display and keypad backlighting. In portable application, six channel LED solutions are popular. The is available in SOT-26 package. ORDERING INFORMATION Package Type SOT-26 Note E6 Part Number E6R E6VR R: Tape & Reel V: Green Package AiT provides all Pb free products Suffix V means Green Package APPLICATION Next-Generation Wireless Handsets PDAs, Palmtops, and Handy Terminals Digital Cameras, Camcorders Battery-Powered Equipment Typical Application REV1.0 -AUG 2009 RELEASED
2 PIN DESCRIPTION Top View Pin # Symbol Function 1 EN Enable Pin. Active high, with an internal 141kΩ pull-down resistor. 2 GND Ground 3 LED4 LED4 Pin. Connect to the LED cathode, leave it open or connect to GND if unused. 4 LED3 LED3 Pin. Connect to the LED cathode, leave it open or connect to GND if unused. 5 LED2 LED2 Pin. Connect to the LED cathode, leave it open or connect to GND if unused. 6 LED1 LED1 Pin. Connect to the LED cathode, leave it open or connect to GND if unused. ABSOLUTE MAXIMUM RATINGS Supply Input Voltage, VIN The other pins 0.3V to 6V 0.3V to 6V Power Dissipation, TA = 25 C SOT W Package Thermal Resistance (Note 4) SOT-23-6, θja Lead Temperature (Soldering, 10 sec.) 250 o C/W 260 o C Operation Temperature Range 40 C to 85 C Junction Temperature 150 o C Storage Temperature Range 40 C to 85 C ESD Susceptibility (Note 2) HBM (Human Body Mode) MM (Machine Mode) -200V Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute maximum rated conditions for extended periods may affect device reliability. REV1.0 -AUG 2009 RELEASED kV
3 RECOMMENDED OPERATING CONDITIONS Parameter Min Typ Max Unit Suply Voltage VDD V Other Pins (Except GND) - < 5.5 V Junction Temperature Range C Ambient Temperature Range C ELECTRICAL CHARACTERISTICS (VIN = VEN=3.6V, TA = 25 C, Unless Otherwise specification) Parameter Conditions Min Typ Max Unit Suply Voltage VDD V Output Current ILED ma Dropout Voltage of any LEDx Current Source VDO IOUT=200mA (NOTES5) mv Quiescent Current IQ No Load μa Shutdown Current ISD VEN=0V μa LED Current Matching -4-4 % Enable High Level Input Voltage VIH V Enable Low Level Input Voltage VIL V Startup Time μs Shutdown Delay Time TOFF VEN=0V μs Thermal Shutdown Temperature TSD oc Hysteresis Temperature oc Note1. Stresses listed as the above Absolute Maximum Ratings may cause permanent damage to the device. These are for stress ratings. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may remain possibility to affect device reliability. Note2. Devices are ESD sensitive. Handling precaution recommended. Note3. The device is not guaranteed to function outside its operating conditions. Note4. θja is measured in the natural convection at TA = 25 C on a low effective single layer thermal conductivity test board of JEDEC 51-3 thermal measurement standard. Note5. Dropout voltage of current source is the minimum voltage needed at pin LEDx to provide the specified current. REV1.0 -AUG 2009 RELEASED
4 TYPICAL PERFORMANCE CHARACTERISTICS 1. Efficiency vs. Supply Voltage 2. LED Current vs. Supply Voltage 3. LED Current vs. LED Dropout Voltage 4. Quiescent Current vs. Supply Voltage REV1.0 -AUG 2009 RELEASED
5 BLOCK DIAGRAM REV1.0 -AUG 2009 RELEASED
6 DETAILED INFORMATION The works with a wide range of supply voltage, from 2.7V to 6.0V. The forward voltage of commercial white/blue LED is in the range of 2.9V to 3.5V at current level of 20mA. Proper selection of the LED to match the supply voltage can fully utilize the Li-ion battery. For example, there is 1% to 3% power left in the Li-ion battery when its voltage reaches 3.275V. So a LED with a forward voltage value of 3.2V can use up to 99% of the battery power under normal working condition. When the voltage of the battery drops below 3.2V, the current through the LED (hence the brightness) starts to decrease. Due to its uniquely designed current regulator, offer low output dropout and provide superior efficiency performance over standard Inductive boost type and capacitive charge pump type LED driver. The EN pin controls the ON/OFF state of the device. A high level state turns on the device and a low level turns off the device, results in the low off state current. The pin needs to be terminated since a floating level of the EN pin will cause the instability of the device. The sink current has a constant value of 20mA. The brightness of the LED can be adjusted by controlling the duty cycle of the LEDn output. This can be accomplished by applying a PWM signal to the EN pin. In, the internal power on sequence presents a delay time of 6us from CE pin to LEDn pin. Hence, In order To normally modulate the output of LEDn in every cycle, the width of dimming signal applied CE pin have to be no less than 6ux, For example, when a dimming signal of 20KHz is applied, the minimum range of dimming is about 12%, that is, the average output current on each channel is 2.4mA. REV1.0 -AUG 2009 RELEASED
7 PACKAGE INFORMATION Dimension in SOT-26 (Unit: mm) Tape Dimension Reel Dimension REV1.0 -AUG 2009 RELEASED
8 IMPORTANT NOTICE (AiT) reserves the right to make changes to any its product, specifications, to discontinue any integrated circuit product or service without notice, and advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied on is current. 's integrated circuit products are not designed, intended, authorized, or warranted to be suitable for use in life support applications, devices or systems or other critical applications. Use of AiT products in such applications is understood to be fully at the risk of the customer. As used herein may involve potential risks of death, personal injury, or servere property, or environmental damage. In order to minimize risks associated with the customer's applications, the customer should provide adequate design and operating safeguards. assumes to no liability to customer product design or application support. AiT warrants the performance of its products of the specifications applicable at the time of sale. REV1.0 -AUG 2009 RELEASED
4-Channel 1-wire Dimming LED Driver with Ultra Low Dropout Current Source
4-Channel 1-wire Dimming LED Driver with Ultra Low Dropout Current Source FEATURES DESCRITION Ultra low dropout: 50mV/20mA(typical) Support up to 4 LEDs LED sink current up to 20mA ±1% LED current matching(typical)
More informationA79LXX BIPOLAR LINEAR REGULATOR THREE TERMINAL NEGATIVE VOLTAGE REGULATOR
DESCRIPTION Three-terminal negative voltage regulator. FEATURES Maximum Output current IOM: 100mA Output voltage VO: -/-6V/-8V/-9V/-12V The is available in SOT-23 and TO-92 Packages. Continuous total dissipation
More informationA6150 LOW DROPOUT VOLTAGE REGULATOR 150mA CMOS LOW NOISE
DESCRIPTION The series of fixed output low dropout linear regulators are designed for portable battery powered applications which require low noise operation, fast enable response time, and low dropout.
More informationBCT Channel LED Driver (Common-Anode & Common-Cathode) Low Dropout Current Source & Current Sink. General Description. Features.
BCT3220 Low Dropout Current Source & Current Sink General Description The BCT3220 is a high performance white LED driver. The BCT3220 uses an internal resistor to set the bias current for four LEDs, which
More informationA mA CMOS LOW NOISE LOW-DROPOUT VOLTAGE REGULATOR. Application. Pin Description
Description The series of fixed output low dropout linear regulators are designed for portable battery powered applications which require low noise operation, fast enable response time, and low dropout.
More informationRT mA 5-Channel Charge Pump White LED Driver with Low Dropout Current Source. Features. General Description. Applications. Pin Configurations
General Description The RT9365 is a high performance white LED driver. It integrates current sources and automatic mode selection charge pump. The part maintains the high efficiency by utilizing an x1/x1.5
More informationM3Z2V4~M3Z75V ZENER DIODES 200mW ZENER VOLTAGE REGULATORS
DESCRIPTION This series of Zener Diodes is packaged in a SOD-323 surface mount package that has a power dissipation of 200mW. They are designed to provide voltage regulation protection and are especially
More informationA4711 SINGLE SPDT ANALOG SWITCH 2.7Ω, LOW-VOLTAGE
DESCRIPTION The is a Single Wide-Bandwidth, fast single-pole double-throw (SPDT) CMOS switch featuring an On-Resistance of 2.7 ohm at VCC=5.0V and wide power supply range from 1.8V to 5.5V. It can be used
More informationA4805 SUPERVISOR (RESET IC) HIGH VOLTAGE HIGH PRECISION VOLTAGE DETECTOR
DESCRIPTION The is a series of high voltage high-precision voltage detectors developed using standard CMOS process. The detection voltage is fixed internally with an accuracy of ±2.4% Nch open-drain. Low
More informationHigh Current Power Switch
SP619 High Current Power Switch FEATURES Max RDS(ON).377 Ohms Overcurrent deactivation 800mA Max leakage current less than 2µA while deactivated Small 6 pin SOT-23 package Built-in Over-temperature Protection
More informationE P AP3615. Pin Assignments. Description. Features. Applications 5 CHANNEL CHARGE PUMP CURRENT SINK FOR LED DRIVER AP3615
AGND PGND VIN EN VOUT1 NC VOUT2 D1 5 CHANNEL CHARGE PUMP CURRENT SINK FOR LED DRIVER Description The is a step-up DC-DC converter based on 1x/1.5x charge pump and low dropout current sink, which helps
More informationSGM mA, Ultra Low Dropout, Low Power, RF Linear Regulators
GENERAL DESCRIPTION The is a low-power, low-noise, low-dropout, CMOS linear voltage regulator that operates from a 2.5V to 5.5V input voltage. It is the perfect choice for low voltage, low power applications.
More informationBCT mA Buck/Boost Charge Pump LED Driver
BCT3140 GENERAL DESCRIPTION The BCT3140 is a current-regulated charge pump ideal for powering high brightness LEDs for camera flash applications. The charge pump can be set to regulate two current levels
More informationGSOT04C~ GSOT15C ESD PROTECTION DUAL TRANSIENT VOLTAGE SUPPRESSORS ARRAY FOR ESD PROTECTION
ESD DESCRIPTION The GSOT04C~GSOT15C are dual monolithic voltage suppressor designed to protect components which are connected to data and transmission lines against ESD. It clamps the voltage just above
More informationIS31BL3231. FLASH LED DRIVER July 2015
FLASH LED DRIVER July 2015 GENERAL DESCRIPTION The IS31BL3231 is a current-regulated charge pump and ideal for powering high brightness LEDs for camera flash and torch applications. The charge pump can
More informationGENERAL DESCRIPTION APPLICATIONS FEATURES TYPICAL APPLICATION DIAGRAM
August 2009 Rev. 2.0.0 GENERAL DESCRIPTION The SP6686 is a current-regulated charge pump ideal for powering high brightness LEDs for camera flash applications. The charge pump can be set to regulate two
More informationA4732 DPDT ANALOG SWITCH LOW-POWER, TWO-PORT, HIGH-SPEED, USB2.0 (480Mbps)
DESCRIPTION The is a Low-Power, Two-Port, High-Speed, USB2.0 (480Mbps) double pole double-throw (DPDT) Analog Switch featuring an On-Resistance of 4.5 ohm at VCC=3V and a Low On Capacitance 3.7pf Typical.
More informationSGM mA, Low Power, Low Dropout 3 -Terminal, Linear Regulators
3 -Terminal, Linear Regulators GENERAL DESCRIPTION The series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for
More informationESD5Z5.0 TRANSIENT VOLTAGE SUPPRESSORS FOR ESD PROTECTION
DESCRIPTION The Series is designed to protect voltage sensitive components from ESD and transient voltage events. Excellent clamping capability, low leakage, and fast response time, make these parts ideal
More information1.5A Ultra Low Dropout Linear Regulator CL39150
General Description The CL39150 is a low dropout three-terminal regulator with a typical dropout of 375mV at 1.5A output current. The CL39150 provides current limit and thermal shutdown. On-chip thermal
More informationSM320A~SM3200A SCHOTTKY DIODE REVERSE VOLTAGE 20 TO 200V FORWARD CURRENT 3.0A
320A~3200A DESCRIPTION The 320A~3200A are available in A Package. ORDERING INFORMATION Package Type Part Number 320A 340A 360A 380A A 3100A 3120A 3150A 3200A Note 5,000pcs/Reel AiT provides all RoHS Compliant
More informationSGM2019 Low Power, Low Dropout, RF-Linear Regulators
GENERAL DESCRIPTION The SGM2019 series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for low voltage, low power
More informationSGM2031 Low Power, Low Dropout, RF - Linear Regulators
RF - Linear Regulators GENERAL DESCRIPTION The series low-power, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage in an ultra small package. They are the perfect choice
More informationHX4002 HX1001. White LED Backlighting Li-Ion Battery Backup Supplies Local 3V to 5V Conversion Smart Card Readers PCMCIA Local 5V Supplies
HX1001 Low Noise, Regulated Charge Pump DC/DC Converter Features Fixed 5V±4% Output VIN Range: 2.7V ~ 5V Output Current: up to 250mA (V IN =4.5V) Low Noise Constant Frequency Operation Shutdown Current:
More informationDIO V Current Limited Load Switch
Rev 1.0 DIO7527 Features Input voltage range: 2.7V to 5.5V 2A Maximum Load Current 70mΩ typical R DS(ON) 70μA quiescent current Under-Voltage Lockout High precision over current trigger point Open-drain
More informationSGM2032 Low Power, Low Dropout, RF Linear Regulators
GENERAL DESCRIPTION The SGM2032 series low power, low noise, low dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for low voltage, low power
More informationYB1300S Switched Capacitor Boost Converter 5V/4.5V
Description The YB1300S is a switched capacitor DC/DC boost converter that produces a regulated 5V output. The input voltage range is from 2.7V to 5.0V that makes the YB1300S ideally for a single cell
More information1A Ultra Low Dropout Linear Regulator
General Description The is a low dropout three-terminal regulator with a typical dropout of 0.28V at 1A output current. The provides current limit and thermal shutdown. On-chip thermal shutdown provides
More informationSGM2020 Low Power, Low Dropout, RF - Linear Regulators
GENERAL DESCRIPTION The series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for low voltage, low power applications.
More informationSGM2019 Low Power, Low Dropout, RF - Linear Regulators
GENERAL DESCRIPTION The SGM219 series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for low voltage, low power
More informationDIO5151B 700mA/1A Buck/Boost Charge Pump LED Driver
Rev 0.1 Features Output Current : DIO5151BED8: 700mA DIO5151BCD10: 1A Up to 90% Efficiency in Torch Mode Adjustable FLASH Mode Current 1 and 2 Automatic Modes for High Efficiency Input Voltage Range: 3V
More informationSGM2022 Dual, Low Dropout, 250mA LDO Regulator
GENERAL DESCRIPTION The SGM2022 is a dual, low-power, low-dropout, CMOS linear voltage regulator. It operates from a 2.5V to 5.5V input voltage and delivers up to 250mA at each channel. The SGM2022 is
More informationJC GENERAL DESCRIPTION FEATURES APPLICATIONS TYPICAL APPLIC PIN ASSIGNMENT. 300mA, Low Consumption, Low Dropout, CMOS LDO
GENERAL DESCRIPTION The series arelowdropout linear regulators and optimized to provide a high performance solution for battery power system to delivery low quiescent current. The device offer a new level
More informationASI. Switched-Capacitor Boost Converter 3.3V-5.0V 100mA GENERAL DESCRIPTION FEATURES APPLICATIONS
ASI Technical Data Sheet Switched-Capacitor Boost Converter 3.3V-5.0V 100mA FEATURES Switched-Capacitor Step-Up Operation Input Range: 2.7V to 5.0V Output Voltage: 3.3V-5.0V (programmable) Output Current:
More informationHigh-side Power Distribution Switch NCT3521U
High-side Power Distribution Switch NCT3521U -Table of Content- 1. GENERAL DESCRIPTION...1 2. FEATURES...1 3. APPLICATIONS...2 4. PIN CONFIGURATION AND DESCRIPTION...2 5. TYPICAL APPLICATION CIRCUIT...3
More informationLow cost, 3 Step Dimming Control, Linear AC LED Driver. Features. Applications. Fig. 1 Typical application with 3 Step dimming
Low cost, 3 Step Dimming Control, Linear AC LED Driver General Description The is a non-isolated linear LED driver for general purpose LED lighting applications. It is capable of driving LEDs in multiple
More informationA24C08. AiT Semiconductor Inc. ORDERING INFORMATION
DESCRIPTION The provides 8192 bits of serial electrically erasable and programmable read-only memory (EEPROM), organized as 1024 words of 8 bits each. The device is optimized for use in many industrial
More informationHM9708 HM9708. Battery-Powered Equipment Motherboard USB Power Switch USB Device Power Switch Hot-Plug Power Supplies Battery-Charger Circuits DC+ VIN
200mΩ Power Distribution Switches Features 200mΩ Typ. High-Side MOSFET 0.8A Current Limit (V IN =3.0V) Wide Input Voltage Range: 2V ~ 5.5V Soft Start Thermal Protection Small SOT-23-5 Package Minimizes
More informationWS3210C62 WS3210C62 Over-Voltage Protection Load Switch Descriptions CSP-9L (Bottom View) Pin Configuration (Top View)
Over-Voltage Protection Load Switch http://www.sh-willsemi.com Descriptions The features a low R ON internal High Voltage Switch and an input range of absolute maximum 30V. An internal input clamp is capable
More informationPWM INTELLIGENT POWER HIGH SIDE SWITCH
July, 2nd 2010 Automotive grade PWM INTELLIGENT POWER HIGH SIDE SWITCH Features Integrated bootstrap for 100kHz switching Charge pump for DC operation Over temperature shutdown Over current shutdown 3.3V
More informationSZAF5.1A~SZAF220A ZENER DIODE 1.5W
DESCRIPTION The are available in SMAF Package ORDERING INFORMATION Package Type Part Number SZAF5.1A SZAF36A SZAF5.6A SZAF39A SZAF6.2A SZAF43A SZAF6.8A SZAF47A SZAF7.5A SZAF51A SZAF8.2A SZAF56A SZAF9.1A
More informationFeatures. Description. Applications. Block Diagram PT7M3808. Fixed Voltage Diagram. Adjustable Voltage Diagram(PT7M3808G01)
Features Description Power-On Reset Generator with Adjustable Delay Time: 1.25ms to 10s. Very Low Quiescent Current: 2.8µA Typical High Threshold Accuracy: 0.5% Typ. Fixed Threshold Voltages for Standard
More informationLOW EMI PWM INTELLIGENT POWER HIGH SIDE SWITCH
Automotive grade Automotive IPS High side AUIPS72211R LOW EMI PWM INTELLIGENT POWER HIGH SIDE SWITCH Features Integrated bootstrap for 100kHz switching Optimized EMI switching Charge pump for DC operation
More informationG5803 1A Single Cell Li-Ion Battery Linear Charger
1A Single Cell Li-Ion Battery Linear Charger Features No External Power MOSFET, Sense Resistor or Blocking Diode Required 1% Regulation Voltage Accuracy Programmable Constant Charge Current Limit up to
More informationFEATURES APPLICATIONS C1 C2 C3 C4 C5 C6 C7 C8 R8/C9 R7/C10 R6/C11. Figure 1 Typical Application Circuit
AUDIO MODULATED MATRIX LED DRIVER GENERAL DESCRIPTION FEATURES November 2016 IS31FL3728 is a general purpose 8 8 LED matrix driver which features an audio frequency equalizer (EQ) mode or a general LED
More informationSTBC ma standalone linear Li-Ion battery charger with thermal regulation. Description. Features. Applications
800 ma standalone linear Li-Ion battery charger with thermal regulation Description Datasheet - production data Features Programmable charge current up to 800 ma No external MOSFET, sense resistors or
More informationWS3210 WS3210. Over-Voltage Protection Load Switch. Descriptions. Features. Order information. Applications.
Over-Voltage Protection Load Switch http://www.sh-willsemi.com WS3210 Descriptions The WS3210 features a low internal High Voltage Switch and an input range of absolute maximum 30V. An internal input clamp
More information2:1 MULTIPLEXER CHIP FOR PCI-EXPRESS ICS Description. Features. Block Diagram DATASHEET
DATASHEET 2:1 MULTIPLEXER CHIP FOR PCI-EXPRESS ICS557-08 Description The ICS557-08 is a 2:1 multiplexer chip that allows the user to select one of the two HCSL (Host Clock Signal Level) or LVDS input pairs
More informationWS4601 WS4601. Descriptions. Features. Applications. Order information. 80mΩ, Current Limited, Power Distribution Switch
80mΩ, Current Limited, Power Distribution Switch www.sh-willsemi.com Descriptions The is high-side switch with ultra-low ON resistance P-MOSFET. Integrated current-limit function can limit inrush current
More informationSGM MHz, Video Driver with Y-C Mixer and Chroma Mute
26MHz, Video Driver with Y-C PRODUCT DESCRIPTION The SGM9140 is a low power, low voltage operation video amplifier with Y/C mixer and driver. SGM9140A is 12.4dB gain driver, and SGM9140B is 6.4dB gain
More informationFigure 1 Typical Application Circuit
4-CH CAPACITIVE TOUCH SENSOR WITH AUTO CALIBRATION August 2015 GENERAL DESCRIPTION The IS31SE5104 is a low power, fully integrated 4-channel solution for capacitive touch button applications. The chip
More information400mA Buck/Boost Charge Pump LED Driver
4mA Buck/Boost Charge Pump LED Driver SP6686 FEATURES Output Current up to 4mA Up to 94% Efficiency in Torch Mode Automatic Softstart Limits Inrush Current Adjustable FLASH Mode x1 and x2 Automatic Modes
More informationCEP8120 Rev 1.0, March, 2015
USB Dedicated Charging Port Controller FEATURES Supports USB DCP Shorting D+ Line to D Line per USB Battery Charging Specification, Revision 1.2 (BC1.2) Supports Shorted Mode (Shorting D+ Line to D- Line)
More informationOvervoltage-Protection Controllers with a Low RON Internal FET MAX4970/MAX4971/MAX4972
19-4139; Rev 1; 8/08 Overvoltage-Protection Controllers General Description The family of overvoltage protection devices features a low 40mΩ (typ) R ON internal FET and protect low-voltage systems against
More informationUNISONIC TECHNOLOGIES CO., LTD US2005 Preliminary CMOS IC
UNISONIC TECHNOLOGIES CO., LTD US2005 Preliminary CMOS IC FIXED CURRENT LIMIT POWER DISTRIBUTION SWITCH DESCRIPTION UTC US2005 is a low voltage cost-effective high-side power switch with current limiting
More informationUM3222E,UM3232E. High ESD-Protected, Low Power, 3.3V to 5.5V, True RS-232 Transceivers. General Description. Applications.
UM3222E,UM3232E High ESD-Protected, Low Power, 3.3V to 5.5V, True RS-232 Transceivers General Description The UM3222E/UM3232E are dual driver, dual receiver RS-232 transceiver solutions intended for portable
More informationA24C02. AiT Semiconductor Inc. ORDERING INFORMATION
DESCRIPTION provides 2048 bits of serial electrically erasable and programmable read-only memory (EEPROM), organized as 256 words of 8 bits each. The device is optimized for use in many industrial and
More informationMAX14653/MAX14654/ MAX14655/MAX High-Current Overvoltage Protectors with Adjustable OVLO
EVALUATION KIT AVAILABLE MAX14653/MAX14654/ General Description The MAX14653/MAX14654/ overvoltage protection devices feature a low 38mΩ (typ) R ON internal FET and protect low-voltage systems against
More informationMAS6240 Piezo Driver with Multi-Mode Charge Pump
MAS624 Piezo Driver with Multi-Mode Charge Pump Both Single Ended and Differential Output Three-Step Volume Adjusting Up to 8Vpp Output from 3V Supply One Wire Audio & Shutdown Control High Efficiency
More informationMIC2544A/2548A. General Description. Features. Applications. Typical Application. Programmable Current Limit High-Side Switch
Programmable Current Limit High-Side Switch General Description The MIC2544A and MIC2548A are integrated, high-side power switches optimized for low loss DC power switching and other power management applications,
More informationSTEF12E. Electronic fuse for 12 V line. Datasheet. Features. Applications. Description
Datasheet Electronic fuse for 12 V line Features DFN10 (3x3 mm) Continuous current typ. 3.6 A N-channel on-resistance typ. 45 mω Enable/fault functions Output clamp voltage typ. 15 V Undervoltage lockout
More information2:1 MULTIPLEXER CHIP FOR PCI-EXPRESS ICS Features
DATASHEET 2:1 MULTIPLEXER CHIP FOR PCI-EXPRESS ICS557-08 Description The ICS557-08 is a 2:1 multiplexer chip that allows the user to select one of the two HCSL (Host Clock Signal Level) input pairs and
More informationNWP2081T. 1. General description. 2. Features and benefits. 3. Applications. 4. Ordering information. Half-bridge driver IC
Rev. 1 3 September 2013 Product data sheet 1. General description The is a high-voltage monolithic integrated circuit made using the latch-up free Silicon-On-Insulator (SOI) process. The circuit is designed
More informationLow forward voltage Ultra small SMD plastic package Low capacitance Flat leads: excellent coplanarity and improved thermal behavior
Rev. 02 15 January 2010 Product data sheet 1. Product profile 1.1 General description Planar Schottky barrier triple diode with an integrated guard ring for stress protection. Three electrically isolated
More informationA24C64. AiT Semiconductor Inc. ORDERING INFORMATION
DESCRIPTION provides 65536 bits of serial electrically erasable and programmable read-only memory (EEPROM) organized as 8192 words of 8 bits each. The is optimized for use in many industrial and commercial
More informationiw7019 Product Brief 8-Channel LED Driver for LCD Panel Backlighting 1.0 Features 2.0 Description 3.0 Applications
1.0 Features 8-channel LED driver, 85V (max) per channel 9V to 28V input supply voltage range Fully integrated high voltage current sink FETs with minimum external components Per channel current: up to
More informationAUR9801D. Pin Assignments. Description. Applications. Features LI-ION/LI POLYMER BATTERY CHARGER AUR9801D
LI-ION/LI POLYMER BATTERY CHARGER Description Pin Assignments The is a highly-integrated battery charger for single-cell Li-ion or Li-polymer batteries capable of operating with an input voltage reached
More informationICS548A-03 LOW SKEW CLOCK INVERTER AND DIVIDER. Description. Features. Block Diagram DATASHEET
DATASHEET ICS548A-03 Description The ICS548A-03 is a low cost, low skew, high-performance general purpose clock designed to produce a set of one output clock, one inverted output clock, and one clock divided-by-two.
More informationDIO5158 1A Lithium Ion Battery Charger IC
DIO5158 Rev 1.5 Features Complete Charge Management for Single Cell Lithium Battery On-chip Power MOSFET No external Blocking Diode or Current Sense Resistors Required Preset 4.2V Regulation Voltage with
More informationMIC2546/2547. Features. General Description. Applications. Typical Application. Dual Programable Current Limit Switch
Dual Programable Current Limit Switch General Description The MIC2546 and MIC2547 are integrated high-side dual power switches optimized for low loss dc power switching and other power management applications,
More informationA WATT FULLY DIFFERENTIAL AUDIO POWER AMP W/INTERNAL FEEDBACK RESISTORS DETECTOR. Application. Ordering Information
Description The is a fully differential audio power amplifier designed for portable communication device applications. It is capable of delivering 1.25 watt of continuous average power to an 8Ω BTL load
More informationACE577C 40V 150mA Low Consumption Linear Regulator Description
Description ACE577C series is a group of positive voltage output, low power consumption, low dropout voltage regulator. It can provide 150mA output current when input / output voltage differential drops
More informationFeatures MIC2779L IN OUT HTH GND. Cellular Telephone Battery Monitor
MIC2779 Voltage Monitor with Adjustable Hysteresis General Description The MIC2779 is a voltage monitor uniquely designed to detect two separate voltage thresholds combined with a delay generator and logic.
More informationStereo PDM-to-I 2 S or TDM Conversion IC ADAU7002
Data Sheet FEATURES 64 decimation of a stereo pulse density modulation (PDM) bit stream to pulse code modulation (PCM) audio data Slave I 2 S or time division multiplexed (TDM) output interface Configurable
More informationUSB/Charger and Over-Voltage Detection Device
FAN3988 USB/Charger and Over-Voltage ion Device Features Charger/USB ion Device Charger/USB Device ion Flag Over-/Under-Voltage ion Flag V BUS Supply: 2.7 V to 20 V C ON of 1.5 pf 6-Lead MicroPak MLP Package
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD MICROPROCESSOR IC DESCRIPTION The UTC UTC812 is a microprocessor (µp) reset circuit designed to monitor the power supplies in µp and digital systems. The UTC UTC812 has push-pull
More informationSTBC mA Standalone linear Li-Ion Battery charger with thermal regulation. Feature summary. Description. Applications.
800mA Standalone linear Li-Ion Battery charger with thermal regulation Feature summary Programmable charge current up to 800mA No external MOSFET, sense resistors or blocking diode required Complete linear
More informationSY89645L. General Description. Features. Block Diagram. Applications. Markets. Precision Low Skew, 1-to-4 LVCMOS/LVTTL-to-LVDS Fanout Buffer
Precision Low Skew, 1-to-4 LVCMOS/LVTTL-to-LVDS Fanout Buffer General Description The is a 3.3V, fully differential, low skew, 1:4 LVDS fanout buffer that accepts LVTTL or LVCMOS inputs. It is capable
More information2 Channel Charge Pump Supply for TFT-LCD
.. General Description The is a high perfomance charge pump converter to generate positive and negative voltage supply optimized for small to medium size thin-film transistor(tft) liquid crystal displays
More informationV PP IN V CC3 IN V CC5 IN EN0 EN1 MIC2561 V CC5_EN V CC3_EN
MIC2561 PCMCIA Card Socket and V PP Switching Matrix Final Information General Description The MIC2561 & V PP Matrix controls PCMCIA (Personal Computer Memory Card International Association) memory card
More information300mA, Low Power, Low Dropout, 3 -Terminal, Linear Regulators
3mA, Low Power, Low Dropout, 3 -Terminal, Linear Regulators GENERAL DESCRIPTION FEATURES The low-power, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input and deliver up to 3mA.
More informationEDL-0A 2.5V CW LASER DIODE DRIVER
2.5V CW LASER DIODE DRIVER FEATURES z CW operation up to 60mA from 2.5..6V supply voltage z Rapid soft start after power-on z Simple power adjustment via the external resistor z Control loop accuracy better
More information5 V Charge Pump HDMI Tx Companion Chip AD9394
Data Sheet FEATURES 5 V at 55 ma output for an HDMI +5 V requirement For hot plug detect with HDMI Tx 3.3 V at 60 ma output Lithium battery input: 2.5 V to 4.5 V Short-circuit limitation: 00 ma 3 4 array
More informationFeatures VCC MIC1810 RESET RESET
Microprocessor Reset Circuit General Description The is an inexpensive microprocessor supervisory circuit that monitors power supplies in microprocessor based systems. The function of these devices is
More informationFP6601QS6. USB Dedicated Charging Port Controller for Fast Charging Protocol and QC 2.0/3.0. Description. Features. Applications. Ordering Information
USB Dedicated Charging Port Controller for Fast Charging Protocol and QC 2.0/3.0 Description The FP6601Q is a fast charge protocol controller for HiSilicon Fast Charging Protocol (FCP) and Qualcomm Quick
More informationHL2430/2432/2434/2436
Features Digital Unipolar Hall sensor High chopping frequency Supports a wide voltage range - 2.5 to 24V - Operation from unregulated supply Applications Flow meters Valve and solenoid status BLDC motors
More information200 ma 36 V Input Ultra Low Supply Current VR for Automotive Applications
Series AEC-Q1 Grade 1 Compliant 2 ma 36 V Input Ultra Low Supply Current VR for Automotive Applications OUTLINE The R1524x is a CMOS-based ultra low supply current voltage regulator featuring 2 ma output
More informationOver-Voltage Protection Load Switch with Surge Protection
Over-Voltage Protection Load Switch with Surge Protection FEATURES Surge protection IEC 61000-4-5: > 100V Integrated low Rdson nfet switch: typical 28mΩ 4.5A continuous current capability Default Over-Voltage
More informationGalvanic Isolated Latching 60V Solid State Relay
TRIUNE PRODUCTS Features Low Quiescent Operating Currents 2uA/4uA in OFF/ON state Scalable galvanic isolation from primary to secondary sides of the device Single control signal for on/off input (CLK)
More informationSN8200 LI+ DUAL BATTERY CONTROLLER
LI+ DUAL BATTERY CONTROLLER GENERAL DESCRIPTION The SN8200 is a highly integrated IC to serve as the control logic for a system with multiple power sources. It integrates a mini-charger s path power MOS
More informationJuly 2015 Rev FEATURES XRP6274/5 XRP6274 DFN-10 PGOOD. Fig. 1: XRP6274 Application Diagram
July 2015 Rev. 2.0.0 GENERAL DESCRIPTION The XRP6274 is an ultra low dropout voltage regulator capable of delivering 2A output currents. It is unique in the industry in being able to operate from a single
More information2 TO 4 DIFFERENTIAL CLOCK MUX ICS Features
DATASHEET 2 TO 4 DIFFERENTIAL CLOCK MUX ICS557-06 Description The ICS557-06 is a two to four differential clock mux designed for use in PCI-Express applications. The device selects one of the two differential
More informationSGM803/SGM809/SGM810 Microprocessor Supervisory Circuit in 3-Pin SOT-23
GENERAL DESCRIPTION The supervisory circuits monitor the power supply voltage in microprocessor and digital systems. They provide a reset output during power-up, power-down and brownout conditions. On
More informationAAT4616A: High Precision Adjustable Current Limited Load Switch with Fault Flag
DATA SHEET AAT4616A: High Precision Adjustable Current Limited Load Switch with Fault Flag Applications USB ports Portable products Hot-swap supplies Notebook computers Proprietary peripheral ports Features
More informationPCIe 3.0 Clock Generator with 4 HCSL Outputs. Description OE VDDXD S0 S1 S2 X1 X2 PD OE GNDXD IREF CLK0 CLK0 CLK1 CLK1 CLK2 CLK2 CLK3 CLK3
PCIe 3.0 Clock Generator with 4 HCSL Outputs Features PCIe 3.0 complaint PCIe 3.0 Phase jitter: 0.48ps RMS (High Freq. Typ.) LVDS compatible outputs Supply voltage of 3.3V ±5% 25MHz crystal or clock input
More informationLow Voltage 1.65 V to 3.6 V, Bidirectional Logic Level Translation, Bypass Switch ADG3233
Data Sheet Low Voltage. V to. V, Bidirectional Logic Level Translation, Bypass Switch ADG FEATURES Operates from. V to. V supply rails Bidirectional level translation, unidirectional signal path -lead
More informationPART TOP VIEW. TO LOAD SINGLE Li+ CELL TO IN LOGIC OUT. Maxim Integrated Products 1
19-224; Rev 2; 6/3 USB-Powered Li+ Charger General Description The is a single-cell lithium-ion (Li+) battery charger that can be powered directly from a USB port* or from an external supply up to 6.5V.
More informationZSPM4121. Under-Voltage Load Switch for Smart Battery Management. Datasheet. Brief Description. Features. Related IDT Smart Power Products
Under-Voltage Load Switch for Smart Battery Management ZSPM4121 Datasheet Brief Description The ZSPM4121 battery management load switch can be used to protect a battery from excessive discharge. It actively
More informationSLG7NT4505 GreenPAK TM. 1 Hz Interrupt Generator. General Description. Pin Configuration
GreenPAK TM General Description Silego GreenPAK SLG7NT4505 is a low power and small form device. The SoC is housed in a 2mm x 2mm TDFN package which is optimal for using with small devices. Features Low
More informationRT9526. Linear Single Cell Li-Ion Battery Charger with Input Over Voltage Protection. General Description. Features. Applications. Pin Configurations
Linear Single Cell Li-Ion Battery Charger with Input Over Voltage Protection General Description The RT9526 is a fully integrated low cost single cell Li-ion battery charger ideal for portable applications.
More information