Miniature Matrix: MMC Series Controlled with USB or Ethernet
|
|
|
- Bernice Chapman
- 6 years ago
- Views:
Transcription
1 PART NUMBER DESCRIPTION The MMC Series is an ideal solution that consists of multi-throw, electromechanical coaxial switches designed to switch a microwave signal from a common input to any of 3, 4, 5, 6, 7 or 8 outputs. The characteristic impedance is 50 Ohms. With the normally open actuator, all paths are open when the switch is de-energized. The MMC Series is designed to allow the remote operation of 1 to 2 Single Pole Multi Throw switches. Remote operation is accomplished via TCP/IP commands to the Matrix s Ethernet interface. Switch control is also accessible via the USB virtual serial port, using the provided command set. Through these interfaces the Coax Switch can be switched to the desired position and its position can be read for verifi cation. The default switch position at power up can be set by the user. The MMC will feature a graphical user interface (GUI), which will enable user to control switches through graphical icons and visuals. ENVIRONMENTAL AND PHYSICAL CHARACTERISTICS Operating Temperature 40 C to 65 C Standard Actuator Life 5,000,000 cycles Connector Type SMA, 2.9mm Weight Non-Terminated 1 Switch 2 Switches Weight Terminated 1 Switch 2 Switches 26 oz. (737 g) (max.) 32 oz. (907 g) (max.) 54 oz. (1531 g) (max.) 60 oz. (1701 g) (max.) ELECTRICAL CHARACTERISTICS ( ONLY) Form Factor Multi-Throw, break before make Frequency Range Up to DC-40 GHz Characteristic Impedance 50 Ohms Operate Time 15 ms (max.) Release Time 15 ms (max.) Actuation Voltage Available 24 Vdc Actuation Current, ambient 170 ma/switch TYPICAL RF CHARACTERISTICS Frequency DC 6 GHz 6 12 GHz GHz GHz GHz* (40 Option) GHz* (40 Option) Insertion Loss, db, typ Isolation, db, typ VSWR, typ. 1.25:1 1.40:1 1.50:1 1.80:1 1.90:1 2.00:1 For specific RF performance data please refer to Coax Switch Part number list in Glossary (page 5) ADDITIONAL INFORMATION INCLUDED ITEMS Interface USB or TCP/IP AC/DC Power Adapter USB Cable Host Operating System Windows, MAC, Linux Power Cord Installation CD Operating System Embedded Ethernet Cable BUILD YOUR BOX Number of Switches (Select One): Non-Terminated (Enclosure A) Number of Throws (Select One): SP3T SP4T SP7T* Terminated (Enclosure B) 1 (Enclosure A) 1 (Enclosure B) 2 (Enclosure A) 2 (Enclosure B) SP5T SP6T SP8T* For additional options, please contact factory. Frequency Range (Select One): DC-18GHz DC-26.5GHz DC-40GHz Remote Control (Select One): USB Only USB & Ethernet Actuation Type (Select One): Normally Open Latching** * Only available in Normally Open Models, up to 18GHz See Page 5, for Part Number List for switches used ** Only available in Enclosure B 2017 TELEDYNE RELAYS (800) MMC SERIES Page 1
2 COAX MECHANICAL OUTLINE FOR ENCLUSRE A Max. Length with Switches= 7.75 (196.85) Enclosure A: UP TO 2 NON-TERMINATED SPMT FRONT VIEW BLOCK DIAGRAM EXAMPLE 24 DC Input TCP/IP MICROCONTROLLER USB MMC SERIES Page 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 2017 TELEDYNE COAX
3 MECHANICAL OUTLINE FOR ENCLUSRE B Enclosure B: UP TO 2 TERMINATED SP3T to SP6T 2017 TELEDYNE RELAYS (800) MMC SERIES Page 3
4 COAX MECHANICAL OUTLINE FOR ENCLUSRE B Enclosure B: UP TO 2 TERMINATED SP7T to SP8T ORDERING CODE # of Switches # of Throws: C = 3 D = 4 E = 5 F = 6 G = 7 H = 8 Example: 2 F L - HF40T Options Options None = SMA DC-18GHz T = Terminated (can stack) HF26 = SMA DC-26.5GHz HP40 = 2.92 mm DC-40GHz F = Failsafe, L = Latching MMC SERIES Page 4 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 2017 TELEDYNE COAX
5 GLOSSARY Actuator An actuator is the electromechanical mechanism that transfers the RF contacts from one position to another upon DC command. Ethernet A high-speed interface used in local area networks (LAN). Ethernet is also known as IEEE standard. DHCP or Static IP can be confi gured through a web interface. Isolation Isolation is the measure of the power level at the output connector of an unconnected RF channel as referenced to the power at the input connector. It is specifi ed in db below the input power level. Magnetic Sensitivity An electro-mechanical switch can be sensitive to ferrous materials and external magnetic fi elds. Neighboring ferrous materials should be permitted no closer than 0.5 inches and adjacent external magnetic fi elds should be limited to a fl ux density of less than 5 Gauss. Multi-Throw Switch A multi-throw switch is a switch with one input and three or more output ports. The SPMT can switch a microwave signal to any of 2, 3, 4, 5, 6, 7 or 8 outputs from a single common input. Performance Parameters vs Frequency Generally speaking, the RF performance of coaxial switches is frequency dependent. With increasing frequency, VSWR and insertion loss increase while isolation decreases. All data sheets specify these three parameters as worst case at the highest operating frequency. If the switch is to be used over a narrow frequency band, better performance can be achieved. Switching Time Switching time is the total interval beginning with the arrival of the leading edge of the command pulse at the switch DC input and ending with the completion of the switch transfer, including contact bounce. It consists of three parts: (1) inductive delay in the coil, (2) transfer time of the physical movement of the contacts, and (3) the bounce time of the RF contacts. This does not include time added by the communication interface, application or operating system. Universal Serial Bus (USB) An industry standard that defi nes the cables, connectors and communication protocols used in a bus for connection, communication and power supply between computers and electronic devices. VCP Driver available for Windows OS, Mac OS, and Linux. Termination When not connected to the common port, RF ports are shunted to ground via a 50Ω path, rated for 1W. Part Number List (Non-Terminated) SP3T to SP6T DC-18GHz CCR-38S DC-26.5GHz CCR-58S DC-40GHz CCR-48K Part Number List (Non-Terminated) SP7T to SP8T DC-18GHz CCR-58S Part Number List (Terminated) SP3T to SP6T DC-18GHz CCT-38S DC-26.5GHz CCT-58S DC-40GHz CCT-49K Part Number List (Terminated) SP7T to SP8T DC-18GHz CCT-58S TELEDYNE RELAYS (800) MMC SERIES Page 5
Miniature Matrix: MMB Series Controlled with USB or Ethernet
PART NUMBER DESCRIPTION The MMB Series is an ideal solution that consists of Transfer, electromechanical coaxial switches designed to switch a microwave signals in a DPDT confi gration. The characteristic
Miniature Matrix: MMA Series Controlled with USB or Ethernet
PART NUMBER DESCRIPTION The MMA Series is an ideal solution that consists of SPDT, electromechanical coaxial switches designed to switch a microwave signal from a common input to either of two outputs.
Series CCR-59S/CR-59S Multi-Throw DC-26.5 GHz Latching Coaxial Switch
PART NUMBER CCR-59S CR-59S DESCRIPTION Commercial Latching Multi-throw, DC-26.5GHz Elite Latching Multi-throw, DC-26.5GHz The CCR-59S/CR-59S is a broadband, multi-throw, electromechanical coaxial switch
SP3T SP4T SP5T SP6T. (GHz) 4~ ~ Model Number Selection
SHX801-0X SMA Series SP3T SP4T SP5T SP6T Coaxial Switch have 28 kind of productions, include Failsafe or Latching, with CPU Drive or without CPU Drive, with Terminations or without Terminations SP3T SP4T
USB. Filter Bank Multiplexor. Mini Matrix. GPIB Custom
Ethernet MIMO USB Filter Bank Multiplexor Mini Matrix GPIB 08 Teledyne Coax Switches Custom (800) 5-768 www.teledynecoax.com +44 (0) 6 454 www.teledyne-europe.com Page COAX SWITCHES t e l e d y n e c o
Stocked Electro-Mechanical Switches
Power Monitors DC-18 GHz SP6T SEM Series y Stdard Features Include: TTL Logic Control, Latching Models, Terminated, Normally Open Models Specifications SP6T, SMA (F), DC to 18 GHz MODEL FEATURES ACTUATING
SEMS-4080-SP12T-SMA DATA SHEET
SP12T Latching Electro-Mechanical Relay Switch From DC to 12.4 GHz, 120 Watts with Self Cut Off, Auto Reset, Indicators, Diodes, SMA SEMS-4080-SP12T-SMA The SEMS-4080-SP12T-SMA is an SP12T Terminated Electromechanical
PLATINUM SERIES R PART NUMBER SELECTION. High performance SPDT up to 40 GHz. Our Most Important Connection is with You. SMA - SMA 2.
PART NUMBER SELECTION Frequency Range: 3: SMA up to 6 GHz 4: SMA up to 20 GHz F: SMA up to 26.5 GHz 8: SMA 2.9 up to 40 GHz Type: 3: Latching (1) 4: Latching + I.C. (1) 5: Latching + S.C.O. (1) 6: Latching
Mini-Circuits RF Switch Control Program for USB RF Switch
Xtra Long Life 100 million cycles USB RF-SPDT Switch DC to 18GHz The Big Deal Capable of 100 million cycles Wide frequency (DC to 18GHz) High power, 10W 2 SPDT electromechanical, absorptive, RF switches
SEMS-4052-SPDT-SMA DATA SHEET
SPDT Latching Electro-Mechanical Relay Switch From DC to 18 GHz, 100 Watts with Indicators, Self Cut Off, SMA The is an SPDT Electromechanical Relay Switch that operates over a wide frequency band from
Allows user to monitor the exact usage and plan test requirements accordingly.
Xtra Long Life 10 million cycles USB/Ethernet RF Switch Matrix 50Ω DC to 18 GHz The Big Deal Dual mechanical SPDT switch box High reliability, 10 million switch cycles 20W power rating (cold switching)
SPDT up to 50 GHz Pc Board - SMA - SMA mm - QMA - SMC - SMB - mini SMB - DIN 1.6/5.6 R Actuator Voltage: 2: 12 Vdc 3: 28 Vdc
SPDT up to GHz Pc Board - SMA - SMA2.9-2.4mm - QMA - SMC - SMB - mini SMB - DIN 1.6/5.6 Radiall s RAMSES SPDT switches offer excellent reliability, high performance and operating frequencies from DC to
Allows user to monitor the exact usage and plan test requirements accordingly.
Xtra Long Life 0 million cycles USB/Ethernet RF Switch Matrix DC to 8 GHz The Big Deal 4 mechanical SPDT switch box High reliability, 0 million switch cycles 0W power rating (cold switching) High isolation,
Allows user to monitor the exact usage and plan test requirements accordingly.
Xtra Long Life 10 million cycles USB/Ethernet RF Switch Matrix DC to 12 GHz The Big Deal Dual mechanical SP6T switch box High reliability, 10 million switch cycles 20W power rating (cold switching) High
Allows user to monitor the exact usage and plan test requirements accordingly.
Xtra Long Life 10 million cycles USB/Ethernet RF Switch Matrix DC to 18 GHz The Big Deal 3 mechanical SPDT switch box High reliability, 10 million switch cycles 20W power rating (cold switching) High isolation,
N1810/1/2 Coaxial Switches
TECHNICAL OVERVIEW N1810/1/2 Coaxial Switches High Performance Electromechanical Switches for Microwave and RF Manufacturing Test Systems Introduction Key Features Insertion loss repeatability: 0.03 db
SEMS-4066-DPDT-SMA DATA SHEET
Transfer Latching Electro-Mechanical Relay Switch From DC to 18 GHz, 100 Watts with Indicators, TTL, Self Cut Off, SMA The SEMS-4066-DPDT-SMA is a Transfer Electromechanical Relay Switch that operates
CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS DPDT
Series S172 DPDT Non-Latching Commercial Electromechanical Relay CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS DPDT SERIES S172 S172D RELAY TYPE DPDT basic relay DPDT relay with internal diode for coil transient
RF SP6T Switch Matrix
USB & Ethernet Controlled 50Ω DC to 26.5 GHz The Big Deal Dual mechanical SP6T switch Excellent performance to 26.5 GHz High reliability, 2 million switch cycles 5W power rating (cold switching) Case Style:
SEMS-4069-DPDT-K DATA SHEET
Transfer Latching Electro-Mechanical Relay Switch From DC to 40 GHz, 10 Watts with Indicators, Self Cut Off, 2.92mm The SEMS-4069-DPDT-K is a Transfer Electromechanical Relay Switch that operates over
CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS DPDT
Series S114 DPDT Non-Latching Commercial Electromechanical Relay CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS DPDT SERIES S114 S114D S114DD DESCRIPTION RELAY TYPE DPDT basic relay DPDT relay with internal
Xtra Long Life 10 million cycles USB RF Switch Matrix 50Ω DC to 18 GHz The Big Deal Mechanical SPDT switch box High reliability, 10 million switch cyc
Xtra Long Life 0 million cycles USB RF Switch Matrix 50Ω DC to 8 GHz The Big Deal Mechanical SPDT switch box High reliability, 0 million switch cycles 0W power rating (cold switching) High isolation, 85
CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS SENSITIVE DPDT
Series S134 DPDT Non-Latching Commercial Electromechanical Relay CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS SENSITIVE DPDT SERIES S134 S134D S134DD RELAY TYPE DPDT basic relay DPDT relay with internal diode
Series 8900 LAN. Operation Manual. Part Number (example configuration) Part Number (example configuration)
Series 8900 LAN Part Number 90570300 (example configuration) Part Number 90570300-001 (example configuration) Operation Manual Operation Manual, Part Number 07508900-001, Rev. B, February 26, 2013 All
SUBMINIATURE SERIES R 591. SUBMINIATURE SPnT up to 40 GHz. Our Most Important Connection is with You. SMA SMA 2.9 QMA
PART Number Selection RF Connectors: 3: SMA up to 6 GHz 7: SMA up to 26.5 GHz 8: SMA 2.9 up to 40 GHz (6) E: QMA up to 6 GHz (5) Type: 0: Normally open 2: Latching, global reset 6: Latching, separated
HIGH REPEATABILITY BROADBAND TO-5 RELAYS DPDT RELAY TYPE PERFORMANCE FEATURES
RF & MICROWAVE HIGH REPEATABILITY BROADBAND TO-5 RELAYS DPDT SERIES SERIES DESIGNATION RELAY TYPE Repeatable RF relay Sensitive, repeatable RF relay INTERNAL CONSTRUCTION PERFORMANCE FEATURES UPPER STATIONARY
Stocked Electro-Mechanical Switches. SP2T SEM Series
DC-6.5 GHz SPT SEM Series Stdard Features Include: Latching Models, Failsafe Models, TTL Logic Control, Indicator Circuits Specifications SPT, SMA (F), DC to 8 GHz With compliments Helmut Singer Elektronik
Agilent 87406B Coaxial Matrix Switch dc to 20 GHz Product Overview
Agilent 870B Coaxial Matrix Switch dc to 0 GHz Product Overview High performance matrix switch for RF and microwave test systems Modern automated test systems demand higher accuracy and performance than
Agilent 87222C/D/E Coaxial Transfer Switches dc to 26.5, 40, 50 GHz Product Overview
Agilent 87222C/D/E Coaxial Transfer Switches dc to 26.5, 0, 50 GHz Product Overview High performance transfer switches for microwave and RF instrumentation and systems Exceptional repeatability for more
R Actuator Terminals: 0: Solder pins 5: D-Sub connector
Terminated and non Terminated up to 40 GHz SMA - SMA2.9 - QMA - DIN 1.6 / 5.6 COAXIAL RADIALL R573 & R574 multithrow coaxial switches are offered in many configurations (over 40,000 possible possible combinations)
Agilent 87104/87106A, B, C Multiport Coaxial Switches dc to 4 GHz, dc to 20 GHz, dc to 26.5 GHz
Agilent 87104/87106A, B, C Multiport Coaxial Switches dc to 4 GHz, dc to 20 GHz, dc to 26.5 GHz Product Overview High performance multiport switches for microwave and RF instrumentation and systems SP4T
Agilent 84904, 6, 7K/L Programmable Step Attenuators
Agilent 84904, 6, 7K/L Programmable Step Attenuators Data Sheet High Accuracy,Excellent Reliability, Long Life Features and description DC to 26.5 GHz, DC to 40 GHz frequency coverage Optional calibration
Agilent 87204/87206A, B, C Multiport Coaxial Switches dc to 4 GHz, dc to 20 GHz, dc to 26.5 GHz
Agilent 87204/87206A, B, C Multiport Coaxial Switches dc to 4 GHz, dc to 20 GHz, dc to 26.5 GHz Product Overview High performance multiport switches for microwave and RF instrumentation and systems SP4T
ELECTROMECHANICAL SWITCH MATRICES
ELECTROMECHANICAL SWITCH MATRICES Electromechanical MS-Series Multiple Switches 1RU Model 2RU Model Features Configuration Operating Manual Control Remote Control Impedance Multiple Switches (bidirectional):
CENTIGRID ESTABLISHED RELIABILITY RELAY DPDT CMOS COMPATIBLE RELAY TYPE
ESTABLISHED RELIABILITY SERIES DESIGNATION 116C CENTIGRID ESTABLISHED RELIABILITY RELAY DPDT CMOS COMPATIBLE RELAY TYPE DPDT general-purpose relay with internal power MOSFET driver, Zener diode gate protection,
CENTIGRID ESTABLISHED RELIABILITY RELAY DPDT SENSITIVE CMOS COMPATIBLE RELAY TYPE
ESTABLISHED RELIABILITY SERIES DESIGNATION 136C CENTIGRID ESTABLISHED RELIABILITY RELAY DPDT SENSITIVE CMOS COMPATIBLE RELAY TYPE DPDT sensitive relay with internal power MOSFET driver, Zener diode gate
HIGH REPEATABILITY, NORMALLY OPEN, BYPASS RF RELAYS RELAY TYPE PERFORMANCE FEATURES
RF & MICROWAVE HIGH REPEATABILITY, NORMALLY OPEN, BYPASS RF RELAYS SERIES SERIES DESIGNATION Repeatable, RF, N.O. bypass relay RELAY TYPE Sensitive, repeatable, RF, N.O. bypass relay INTERNAL CONSTRUCTION
Multi-Channel Attenuator
50Ω 1 to 6000 MHz Product Overview Mini-Circuits ZTDAT series are multi-channel programmable attenuator systems suitable for a wide range of signal level control applications from 1 MHz to 6 GHz. Each
Modular Test System. ZTM Series
Rack Mount Modular Test System 50Ω DC to 18 GHz The Big Deal Customizable Front Panel Layout USB and Ethernet Control User-Friendly GUI and DLLs Included Fast Turnaround, Within 2 Weeks! Product Overview
Agilent N1810/1 /2 Coaxial Switches
Agilent N1810/1 /2 Coaxial Switches High Quality Electromechanical Switches for Microwave and RF Manufacturing Test Systems Technical Overview High repeatability - < 0.03 db guaranteed up to 5 million
BROADBAND HIGH REPEATABILITY TO-5 RELAY SPDT DC 8 GHz
BROADBAND HIGH REPEATABILITY TO-5 RELAY SPDT DC 8 GHz SERIES RF311 RF331 SERIES DESIGNATION RF311 RF331 RELAY TYPE SPDT RF TO-5 relay Sensitive, SPDT RF TO-5 relay INTERNAL CONSTRUCTION UNI-FRAME ARMATURE
NETAFIM WILL NOT ACCEPT RESPONSIBILITY FOR DAMAGE RESULTING FROM THE USE OF NETAFIM'S PRODUCTS OR THE USE OF THIS MANUAL.
[Type text] COPYRIGHT 2011, NETAFIM NO PARTS OF THIS PUBLICATION MAY BE REPRODUCED, STORED IN AN AUTOMATED DATA FILE OR MADE PUBLIC IN ANY FORM OR BY ANY MEANS, WHETHER ELECTRONIC, MECHANICAL, BY PHOTOCOPYING,
pickeringtest.com B Microwave Multiplexer Module
0-78B Microwave Multiplexer Module Single or Dual Channel Panel Mounted Multiplexer Up To 3 Remote Multiplexers From Single Slot Version 18GHz, 2.GHz and 0GHz Versions 0 Ohm Terminated and Unterminated
40-785B Microwave Multiplexer Module
40-785B Microwave Multiplexer Module Single or Dual 6 Channel Panel Mounted Multiplexer Up To 3 Remote Multiplexers From Single Slot Version 18GHz, 26.5GHz 40GHz & 50GHz Versions 50Ω Terminated and Unterminated
Programmable Attenuator
USB / Ethernet Programmable Attenuator 50Ω 0 30 db, 0.5 db step 0.1 to 30 GHz The Big Deal Precision attenuation up to 30 GHz Fine resolution, 0.5 db Fast transitions, 100 ns USB and Ethernet control Control
Series 8000 RF Signal Switch Solution
RF Signal Switch Solution Operation Manual Operation Manual, Part Number 07508000-006, Rev. A, May 17, 2013 All technical data and specifications in this publication are subject to change without prior
SWITCH SOLUTIONS SWITCH MATRIX CATALOG ELECTROMECHANICAL MATRIX SOLID STATE MATRIX FIBER OPTIC MATRIX FULLY INTEGRATED SYSTEMS
SWITCH MATRIX CATALOG SWITCH SOLUTIONS ELECTROMECHANICAL MATRIX SOLID STATE MATRIX FIBER OPTIC MATRIX FULLY INTEGRATED SYSTEMS OUR EXPERTISE, YOUR SWITCH SOLUTION SINCE 1945 Our Experience As the world
RAMSES SERIES R 57. SPnT Terminated & non Terminated up to 40 GHz. Our Most Important Connection is with You.
SPnT Terminated & non Terminated up to 40 GHz SMA SMA 2.9 QMA - DIN 1.6 / 5.6 Radiall's R573 & R574 multithrow coaxial switches are offered in many configurations (over 40,000 possible combinations) including
USB-1SP8T-63H. The Big Deal Very high isolation, 80 db typ High speed switching, 250 ns typ High power handling, +30 dbm max USB power & control
Solid state USB RF SP8T Switch 10 to 00 MHz The Big Deal Very high isolation, db typ High speed switching, 250 ns typ High power handling, +30 dbm max USB power & control Software Package Case Style: QM2470
PAGE 1/6 ISSUE SERIES Micro-SPDT PART NUMBER R516 X3X 10X R 516 _ 1 0 _
PAGE 1/6 ISSUE 13-08-18 SERIES Micro-SPDT PART NUMBER R516 X3X 10X R516 series: the RAMSES concept merges with the SLIM LINE technology, breaking up the frequency limits of SMT switches : - FULL SMT TECHNOLOGY
Programmable Attenuator 0.1 to 40 GHz, 31.5 db USB, PARALLEL, I2C, SPI & UART Control Modes
WMOD 4209-31.5-X Programmable Attenuator Datasheet RS API Technologies Corp Copyright 2018 Programmable Attenuator 0.1 to 40 GHz, USB, PARALLEL, I2C, SPI & UART Control Modes Features Ideal for Automated
The UFC-6000 can measure the frequency of a signal from 1 to 6000 MHz. Mini-Circuits
Wide Frequency Range RF Frequency Counter 1-6000 MHz The Big Deal USB HID device compatible with 32/64 bit operating systems Wide Frequency Range Uses internal or External reference Supplied with proprietary
dual-line 6-dIGIt process MeteR
dual-line 6-dIGIt process MeteR ProVu Se r i e S provu Model pd6000 0-20 ma, 4-20 ma, 0-5 V, 1-5 V, and ±10 V Inputs NEMA 4X, IP65 Front Universal 85-265 VAC or 12/24 VDC Input Power Large Dual-Line 6-Digit
Series 8000 RF Signal Switch Solution
RF Signal Switch Solution Operation Manual Operation Manual, Part Number 07508000 006, Rev. B, Oct 7, 2014 All technical data and specifications in this publication are subject to change without prior
USB-4SP2T-63H. The Big Deal. Typical Applications. Product Overview. Key Features
Solid state USB RF SPDT Switch Matrix 10 to 6000 MHz The Big Deal Very high isolation, 80 db typ Quad SPDT switches with single USB interface High speed switching, 250 ns typ High power handling, +30 dbm
Dimensions (inch) 3.74 x 1.45 x.95. PMA1-03S 70 MHz - 3 GHz Inline Power Monitor with SMA Connectors 1
The is a thru-line microwave power monitor, designed to non-invasively measure and display the power passing through a coaxial line. Battery life is exceptional due to proprietary low power design and
DCM Dynamic Contact Measuring
DCM Dynamic Contact Measuring The fast and safe way of testing your HV Circuit breakers using With the new tool for the Elcon products Switch Analyzers SA10 and SA5, the DCM (Dynamic Contact Mesurment),will
With the use of Mini-Circuits low cost Hand-Flex interconnect cables, multiple matrix configurations can be easily created by the user.
50Ω The Big Deal Flexible mechanical switch system USB and Ethernet Control Full software support All configurations shipped in 2-3 weeks! Typical Applications Automated production testing Laboratory testing
CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS
CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS DPDT SERIES S114 SERIES DESIGNATION RELAY TYPE S114 S114D S114DD DPDT basic relay DPDT relay with internal diode for coil transient suppression DPDT relay with
5. Terminal Shape P: PCB Terminals 6. Classification None : Standard ST : Stand-off 0.64 mm 15 : High-sensitivity (150 mw) Low-sensitivity
World's tandard Model! Resistant to electromagnetic interference, enables high-density mounting. Impulse withstand voltage of 1,5V meets FCC requirements. old-clad twin-contacts provide short contact bounce
Product Performance Specification Mini Coaxial Connector
Product Performance Specification Mini Coaxial Connector 1. Scope 1.1 Content This specification covers the performance, tests and quality requirements for the Mini Coaxial connector and connector system.
Product Manual Dual Relay Board
Product Manual 3051 - Dual Relay Board Phidgets 3051 - Product Manual For Board Revision 1 Phidgets Inc. 2009 Contents 4 Product Features 4 Connections 5 Getting Started 5 Checking the Contents 5 Connecting
CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS DPDT RELAY TYPE. DPDT basic relay DPDT relay with internal diode for coil transient suppression DESCRIPTION
CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS DPDT SERIES S172 SERIES DESIGNATION RELAY TYPE S172 S172D DPDT basic relay DPDT relay with internal diode for coil transient suppression INTERNAL CONSTRUCTION
Keysight Technologies 87606B Coaxial Matrix Switch
Keysight Technologies 87606B Coaxial Matrix Switch DC to 20 GHz Technical Overview 02 Keysight 87606B Coaxial Matrix Switch Technical Overview High Performance Matrix Switch for RF and Microwave Test Systems
No need for external DC blocking circuitry
Solid state USB / TTL RF SP16T Switch 1 to 00 MHz The Big Deal Very high isolation, 90 db typ High speed switching, 5.5 µs typ High power handling, +30 dbm max USB & TTL power & control Software Package
A S C O R I N C O R P O R A T E D VXI MODULES
A S C O R I N C O R P O R A T E D VXI MODULES General Purpose Switch Modules Most VXI test environments require general purpose switching capabilities to enable and disable particular I/O circuits, especially
LNF-xxxxxxC4_8A 4-8 GHz Cryogenic Triple Junction Isolator or Circulator
LNF-ISISISC4_8A LNF-CICICIC4_8A Product features RF bandwidth: 4-8 GHz Insertion loss @3K: 0.4 db typical Insertion loss @77K: 0.5 db typical Isolation: 60 db typical Port match: 22 db typical RF-connectors:
Dimensions (inch) 3.74 x 1.45 x.95. PMA1-08S 70 MHz -10 GHz Inline Power Monitor with SMA Connectors 1
PMA-8 The PMA-8 is a thru-line microwave power monitor, designed to non-invasively measure and display the power passing through a coaxial line. Battery life is exceptional due to proprietary low power
275 to 550 MHz Frequency Synthesizer
LCFS1055-DEMO 275 to 550 MHz Frequency Synthesizer Low Phase Noise in a Lower Cost Package Features Low Phase Noise: -116 dbc/hz (100 khz offset) Internal Reference Oscillator (External Option at No Extra
MDrive Hybrid Integrated motion systems with Hybrid Motion Technology. MDrive 34 Hybrid Step Torque Speed
MDrive Hybrid Integrated motion systems with Hybrid Motion Technology MDrive 34 Hybrid Description MDrive Hybrid Presentation The MDrive Hybrid is a very compact motion system that solves many servo applications
SWITCH SOLUTIONS SWITCH MATRIX CATALOG ELECTROMECHANICAL MATRIX SOLID STATE MATRIX FIBER OPTIC MATRIX FULLY INTEGRATED SYSTEMS
SWITCH MATRIX CATALOG SWITCH SOLUTIONS ELECTROMECHANICAL MATRIX SOLID STATE MATRIX FIBER OPTIC MATRIX FULLY INTEGRATED SYSTEMS OUR EXPERTISE, YOUR SWITCH SOLUTION SINCE 1945 Our Experience As the world
Magnetically Actuated Safety Interlock Switches
Conforms to EN10, EN292, EN020-1 CSA and BG approved Actual Size Magnetically Actuated Safety Interlock Switches Large selection choose from a large selection of contact configurations housed in plastic,
CREATING YOUR OWN RF SWITCHING SYSTEM
AN2008-08-YOM Rev.0 By Sara Nazemzadeh August 5, 2008 Application Note REATING YOUR OWN RF SWITHING SYSTEM Abstract The purpose with this Application Note is to introduce an alternative way of meeting
Technical Overview. Key Features
Agilent P94xA/C Solid State PIN Diode Switches P942A 1 MHz to 8 GHz SPDT PIN switch P942C 1 MHz to 18 GHz SPDT PIN switch P944A 1 MHz to 8 GHz SP4T PIN switch P944C 1 MHz to 18 GHz SP4T PIN switch Technical
Allows connecting up to 50 units in series to a single power supply and 3 wire SPI control.
Solid state SPI RF SP8T Switch 1 to 6000 MHz The Big Deal Daisy Chain SPI Control High Isolation (80 db typ) High speed switching (6 µs typ) High power handling (+27 dbm max) SMP snap-on RF connectors
iologik 4000 Series Modular remote I/O Introduction iologik E4200 Specifications Remote I/O Slice Form Factor and Flexible I/O Variety
iologik 4000 Series Modular remote I/O I/O expansion without a backplane Supports SNMPv1/v2c Active communications with MX-AOPC UA Server Easy configuration with Modular ioadmin utility Friendly configuration
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF S AND MODULES FOR 40 GHz COAXIAL S AND MODULES Table of Contents SECTION 1 INSTALLATION AND REMOVAL SECTION 2 MODULE INSTALLATION AND REMOVAL SECTION 3 CROSS REFERENCE
GT Micro D High Speed Characterization Report For Differential Data Applications. Micro-D High Speed Characterization Report
GT-14-19 Micro D For Differential Data Applications GMR7580-9S1BXX PCB Mount MWDM2L-9P-XXX-XX Cable Mount Revision History Rev Date Approved Description A 4/10/2014 C. Parsons/D. Armani Initial Release
Vibration Switches viib
Vibration Switches technivib -- Z.I de Pringy -- 531 route des vernes 74 370 PRINGY France Tél :: 0033 4 50 01 23 20. Fax :: 0033 4 50 01 57 81 e.mail :: info@technivib.com Website : : www.technivib.com
2. Control Pin Functions and Applications
IMARY CONTROL ( PIN) Module Enable / Disable. The module can be disabled by pulling the below 2.3 V with respect to the Input. This should be done with an open-collector transistor, relay, or optocoupler.
209/219/229 Multi-Pole Circuit Protectors 202 branch circuit applications such as EDP, air conditioners, panel boards
The 29, E-Frame circuit breaker combines power switching with accurate, reliable circuit protection 29/29/229 Magnetic Circuit Protectors 99 in a compact single or multipole 249 Power Selector Breaker
Limiters Detectors Switches, Switch Matrices Attenuators Phase Shifters Directional Couplers Power Dividers Integrated Assemblies.
Limiters Detectors Switches, Switch Matrices Attenuators Phase Shifters Directional Couplers Power Dividers Integrated Assemblies RF / Microwave Components & Subsystems 2011 Table of Contents Limiters
D6030S - D6030D INSTRUCTION MANUAL. D SIL 3 Switch/Proximity Detector Repeater Relay Output. Models D6030S, D6030D
D600S - D600D INSTRUCTI MANUAL SIL Switch/Proximity Detector Repeater Relay, DIN Rail, Models D600S, D600D D600 - SIL Switch/Proximity Detector Repeater Relay G.M. International ISM0- Characteristics General
CheckSum. FUNC-2B Functional Test Module. The FUNC-2B features:
CheckSum FUNC-2B Functional Test Module FUNC-2B Functional Test Module Made in U.S.A. The CheckSum Model FUNC-2B Functional Test System is designed to be used as an extension to a CheckSum ICT System.
iologik E2200 Series Smart Ethernet remote I/O with Click&GO Logic Introduction Remote I/O PC-Free Alarm and Control Intelligence
iologik E2200 Series Smart Ethernet remote I/O with Click&GO Logic Active communication with patented MX-AOPC UA Server and Active OPC server Smart alarm management with email, SNMP traps, TCP, UDP Save
12-36 VDC/12-24 VAC Power Option 4-Digit Display, 0.56 (14.2 mm) or 1.20 (30.5 mm)
4-20 ma & Relay Output Features 4-20 ma, ± 10 V, TC & RTD Inputs 12-36 VDC/12-24 VAC Power Option 4-Digit Display, 0.56 (14.2 mm) or 1.20 (30.5 mm) 24 VDC @ 200 ma Transmitter Power Supply Options Type
78 Series Electromechanical Relay Selection Guide
78 Series Electromechanical Relay Selection Guide Specification 781 Series 782 Series 783 Series 784 Series Coil Voltages Configuration SPDT DPDT 3PDT 4PDT Contact Rating 15A 15A 15A 15A Base Socket 5
Agilent U2100A Series Digital IO, 32-Terminal Devices
99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Back to the Agilent U2122A Product Page Agilent U2100A Series Digital IO, 32-Terminal
2.6 GHz capable, 10 W carrying power (at 2.6 GHz), 50Ω/75Ω impedance and 1 Form C relays
.6 GHz capable, W carrying power (at.6 GHz), 5Ω/75Ω impedance and Form C relays RE RELAYS (ARE)..44..44 mm inch FEATURES Excellent high frequency characteristics (to.6ghz) Surface-mount type also available
Features. High RF Shielding. Easy Opening/Closing of lid. EMI filters on all Data and DC lines. Easily customizable to meet various test needs
TC-5915A Shield Box Features High RF Shielding Easy Opening/Closing of lid EMI s on all Data and DC lines Easily customizable to meet various test needs Shock absorber on lid Specifications Mechanical
MDrive Linear Actuator
MDrive Linear Actuator Compact, integrated all-in-one linear motion systems MDrive 23 Plus Linear Actuator, Description MDrive Plus Linear Actuator Presentation The MDrive Plus Linear Actuator is an integrated
Distributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. TESTING LOW PROFILE 2 FORM C RELAY TQ RELAYS 9.354 26.7 +.4 1.51 5.2 +.16.8
MHz MHz. dbi MHz MHz MHz MHz MHz MHz
Husky - Pro Series 11 in 1 Antenna MIMO LTE, MIMO Dual Band Wi-Fi, and GPS External IP67 Antenna Product Description Parsec s Husky Series PTA PRO11H 4LTE 6WIFI GPS is a low profile eleven-in-one double
Standard Options. Model 4100 Position Indicating Meter. Three Phase Motor Control. Positran Transmitter
Standard Options Model 4100 Position Indicating Meter A percent-of-full-travel meter is supplied with a trim potentiometer resistor, terminal block and connectors. A potentiometer is required in the actuator
Features. SC Switch Control Platforn. SC2000, SCX2000, SCP2000 SCM Series Modules
SC2, SCX2, Features The SC switch control platform is designed for a multitude of switching applications in RF systems. Each of the main chassis is equipped with five (5), rear-facing, user-configurable
Level-Lance Model 5400A
Sales Manual Section 100 PRODUCT SPECIFICATION 5400A GENERAL DESCRIPTION The ROBERTSHAW Level-Lance Model 5400A is a microprocessor based, multi-point On-Off capacitance type level detection system. Utilizing
Features. High RF Shielding. Easy Opening/Closing of lid. EMI filters on all Data and DC lines. Easily customizable to meet various test needs
TC-5915A Shield Box Features High RF Shielding Easy Opening/Closing of lid EMI filters on all Data and DC lines Easily customizable to meet various test needs Shock absorber on lid Specifications Mechanical
IAP-320 series are reliable a/b/g WLAN Access Point with 2 ports LAN. It supports 802.1X and MAC filters for
IAP-320 / IAP-320+ Industrial IEEE 802.11 a/b/g wireless access point with 2x10/100Base-T(X) Features High Speed Air Connectivity: WLAN interface support up to 54Mbps link speed Highly Security Capability:
Features wideband, 10 to 4200 MHz low insertion loss, 0.6 db typ. feed through terminal per DC port
Coaxial Bias-Tee 50Ω Wideband 10 to 4200 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C RF Power Voltage at DC port Input Current DC resistance from DC to RF&DC
1/32-DIN TEMPERATURE CONTROLLER INSTALLATION, WIRING AND OPERATION MANUAL FORM 3882
1/32-DIN TEMPERATURE CONTROLLER INSTALLATION, WIRING AND OPERATION MANUAL FORM 3882 This manual is intended for use in support of installation, commissioning and configuration of the 1/32-DIN Temperature