HomeServer/ FacilityServer Switching and dimming in QuadClient

Transcription

1 HomeServer/ FacilityServer Switching and dimming in QuadClient In this learning unit you - create the switching and dimming functions in the QuadClient Configurator - connect the functions with KNX/EIB group addresses. Continue with any key. page of

2 HS Expert [Training.hs3] Configuring the functions for the QuadClient interface is carried out in the QuadClient Configurator (QC Config). You can call the QC Config via the Interface tab. Click on the QC Config ( ) menu button to open the QC Config page 2 of 46

3 2 Training.hs3 - QuadConfig In one of the previous units you defined the user group, created a user and designed a building structure. To fill this function, mark itin the project window. Click the Building structure ( ) tree entry. Click on the tree entry Fold out Ground Floor ( ) in the building structure to open the ground floor for editing. page 3 of

4 The function templates are available in the Function templates window. They are sorted according to function areas. The switching and dimming function templates are found in the Lighting / switching group. Click the fold tree Lighting /switching ( ) button page 4 of 46

5 Assignment of a function in a room is carried out by marking, and then moving via drag and drop. Drag the Switch with status ( ) tree entry, while keeping left mouse button pressed, to Room 02 ( ). The text of a function in the building structure will now be defined. Enter LG into the field Text in room. The switching behaviour of the function template Switching with status can be set via the Behaviour selection field. You can select between Switch on / Switch off and Switch over (toggle). Toggle is selected in this example. Here the status should be directly displayed or the condition triggered by an action (inverted status). The condition is displayed directly in this example. page 5 of

6 Click the Behaviour ( ) list item. Click the Switch on with status ( ) page 6 of 46

7 3 Click the Toggle with status ( ) list item. page 7 of

8 4 Training.hs3 - QuadConfig To connect the function with the group addresses, fold open Tree 02 Switch lighting in the EIB comminication objects window. Then fold out the middle group and connect the group address for light group via drag and drop to the switching object in the properties window of the function. Click the fold tree 02 Lights switching ( ) button page 8 of 46

9 Click the fold tree 0 Middle group 0 ( ) button. 2 Drag the House R02 LG ( ) tree entry, while keeping left mouse button pressed, tolist item Switching object ( ). page 9 of

10 2 In this exercise, the status is displayed via the switching group address. A feedback group address from the switching actuator is waived. Drag the House R02 LG ( ) tree entry, while keeping left mouse button pressed, tolist item Status object ( ). 2 3 To display the light rows 2 to 4 in Room 02, proceed as with light row page 0 of 46

11 Drag the Switch with status ( ) tree entry, while keeping left mouse button pressed, to Room 02 ( ). Enter LG2 into the field Text in room. Click the Behaviour ( ) list item. Click the Switch on with status ( ). page of

12 5 Click the Toggle with status ( ) list item page 2 of 46

13 6 Training.hs3 - QuadConfig Drag the House R02 LG2 ( ) tree entry, while keeping left mouse button pressed, to Switching object ( ). 2 page 3 of

14 Drag the House R02 LG2 ( ) tree entry, while keeping left mouse button pressed, tolist item Status object ( ). 2 3 Drag the Switch with status ( ) tree entry, while keeping left mouse button pressed, to Room 02 ( ). Enter LG3 into the field Text in room. Click the Behaviour ( ) list item page 4 of 46

15 Click the Switch on with status ( ). page 5 of

16 7 Click the Toggle with status ( ) list item page 6 of 46

17 8 Training.hs3 - QuadConfig Drag the House R02 LG3 ( ) tree entry, while keeping left mouse button pressed, to Switching object ( ). 2 page 7 of

18 Drag the House R02 LG3 ( ) tree entry, while keeping left mouse button pressed, tolist item Status object ( ). 2 3 Drag the Switch with status ( ) tree entry, while keeping left mouse button pressed, to Room 02 ( ). Enter LG4 into the field Text in room. Click the Behaviour ( ) list item page 8 of 46

19 Click the Behaviour ( ). page 9 of

20 9 Click the Toggle with status ( ) list item page 20 of 46

21 0 Training.hs3 - QuadConfig Drag the House R02 LG4 ( ) tree entry, while keeping left mouse button pressed, to Switching object ( ). 2 page 2 of

22 Drag the House R02 LG4 ( ) tree entry, while keeping left mouse button pressed, tolist item Status object ( ). 2 In the following you supplement the switching functions with two dimming functions in Room 03. With dimmer D you assign the group addresses, as described previously, via drag and drop. With dimmer D2 you learn an alternative assignment method via the assignment list. Both procedures are the same, and are simply a possibility for you to define your personal method of working. Drag the Dimmer ( ) tree entry, while keeping left mouse button pressed, to Room 03 ( ) page 22 of 46

23 Enter D into the field Text in room. Click the Behaviour ( ) list item. Click the Toggling mode - Inverted display ( ). page 23 of

24 Click the Toggling mode ( ) list item page 24 of 46

25 2 Training.hs3 - QuadConfig Drag the House R03 Dimmer ( ) tree entry, while keeping left mouse button pressed, to Switch ( ). page 25 of

26 Click the fold tree 03 Lights dimming ( ) button. Click the fold tree 0 Middle group ( ) button. 2 Drag the House R03 Dimmer dimming 4 bit ( ) tree entry, while keeping left mouse button pressed, tolist item Dim ( ) page 26 of 46

27 Click the unfold 03 Light dimming button ( ) button. Click the fold tree 04 Lights value ( ) button. page 27 of

28 Click the fold tree 0 Middle group ( ) button. 2 Drag the House R03 Dimmer feedback value ( ) tree entry, while keeping left mouse button pressed, totree entry Brightness value ( ) page 28 of 46

29 2 3 Drag the Dimmer ( ) tree entry, while keeping left mouse button pressed, to Room 03 ( ). Enter D2 into the field Text in room. Click the Behaviour ( ) list item. page 29 of

30 Click the Toggling mode - Inverted display ( ) page 30 of 46

31 3 Click the Toggling mode ( ) list item. page 3 of

32 4 With the following assignment steps you assign the group addresses via the list method, which has the same result as the drag and drop method. Click the Switch ( ) page 32 of 46

33 5 Selection Click the fold tree 02 Lights switching ( ) button. page 33 of

34 Click the fold tree 0 Mittelgruppe 0 ( ). 2 Click the House R03 Dimmer 2 ( ) tree entry. Click on the Ok ( ) button to accept the assignment page 34 of 46

35 6 Training.hs3 - QuadConfig Click the [No selection] ( ). page 35 of

36 7 Selection Click the ausklappen 04 Beleuchtung Wert ( ) page 36 of 46

37 Click the ausklappen 0 Mittelgruppe 0 ( ). 2 Click the House R03 Dimmer 2 value ( ) tree entry. Click the Ok ( ) button. page 37 of

38 8 Training.hs3 - QuadConfig Click the [No selection] ( ) page 38 of 46

39 9 Selection Click the fold tree 03 Lights Dimming ( ) button. page 39 of

40 Click the fold tree 0 Mittelgruppe 0 ( ) button. 2 Click the House R03 Dimmer 2 dimming 4 bit ( ) tree entry. Click the Ok ( ) button. 2 3 After you have carried out all settings, save the input page 40 of 46

41 Click the Save ( ) button. To transfer the modified project to the HomeServer, terminate the QuadClient Configurator via the File menu. Click the File ( ) menu item. Click the Exit ( ) menu item. page 4 of

42 20 HS Expert [Training.hs3] To carry out a plausibility check before transferring, click on the Check button. Click the Check ( ) button page 42 of 46

43 2 Expert The message 'no error found' tells you that the project data are plausible. Click the OK ( ) button. page 43 of

44 22 HS Expert [Training.hs3] Clicking the Transfer button transfers the project to the HomeServer. Click on the Transfer ( ) button to terminate the learning unit page 44 of 46

45 23 HS Expert [Training.hs3] page 45 of

46 24 HS Expert [Training.hs3] You can return to the course overview by pressing any key page 46 of 46