Introduction Introduction:

Transcription

1 Introduction Introduction: With the central control of many devices / functions, convenient applications to make everyday life easier are made available to users of a building. The central off function at the front door and the panic button in the bedroom to scare off intruders are the most realised functions in homes. Continue with any key. Process In the following learning unit, you will learn how the devices are connected with the central function. Continue with any key. Page of

2 Page 2 of 4

3 2 Challenge Challenge A push button sensor located next to the front door in the hallway of a private home should switch off all the lighting. The push button sensor transmits a group address which is connected to all actuator channels to be controlled. Only switch-off is required. Continue with any key. Procedure The devices have already been added to the building structure. The central group address has also already been created. Subsequently, the group address will be linked to the respective communication objects of the actuator in the cabinet and the push button sensors in the living room or hallway. Continue with any key. Page 3 of

4 Page 4 of 4

5 3 Adapting parameters in the push button sensor The push button sensor in the hallway transmits the function Central off into the bus. The function is triggered here by the user when he leaves the home. Change the command for the left rocker to Off. Then the push button sensor only sends out OFF commands. Click the ( ) dropdown button... Page 5 of

6 Now select the parameter. Click the OFF ( ) list item.. During the course of the project, assign the group address of the communication object to the push button rocker Page 6 of 4

7 4 Assigning group addresses 2 Now connect the rocker of the push button sensor to the group address Central function of the house. While keeping the left mouse button pressed, drag the ( entry to the ( ) tree entry. ) tree Page 7 of

8 2 Connect the central function to Outputs -3 in the following steps. Begin initially with Output. While keeping the left mouse button pressed, drag the ( to the ( ) tree entry. ) tree entry Page 8 of 4

9 2 While keeping the left mouse button pressed, drag the ( to the ( ) tree entry. ) tree entry Page 9 of

10 2 While keeping the left mouse button pressed, drag the ( to the ( ) tree entry. ) tree entry During the course of the project, assign the group address of the central function to the push button sensors Page 0 of 4

11 2 The central function is also transmitted to the rockers of the push button sensors to communicate the light has been switched off to the linked status LED. While keeping the left mouse button pressed, drag the ( to the ( ) tree entry. ) tree entry Page of

12 2 While keeping the left mouse button pressed, drag the ( to the ( ) tree entry. ) tree entry The status LED also react to the central function with this Page 2 of 4

13 2 Proceed in the same way for the second push button sensor. However, in this simulation it is being foregone because you have practised the approach enough with the first push button sensor. While keeping the left mouse button pressed, drag the ( entry to the ( ) tree entry. ) tree The status LED also react to the central function in this case. Page 3 of

14 5 End learning unit Now, all of the relevant equipment has been successfully connected to the central function. Return to the course overview by pressing any key Page 4 of 4