Selection and Ordering data. Selection and Ordering data

Transcription

1 Pointek CLS3, threaded version 7 M L Note: To select Standard or Digital CLS3 (with PROFIUS P), see final place holder under. Probe version (Threaded lengths include process thread.) Standard version, rod 35 mm (3.78 ) X Extended rod, length 5 mm (9.69 ) Extended rod, length 75 mm (29.53 ) Extended rod, length mm (39.37 ) C - Extended rod, factory adjusted length 25 to D 999 mm (9.8 to 39.3 ) - Extended cable, length 3 mm (8. ), 2 ) - Extended cable, length 6 mm (236.2 ), 2 ) - Extended cable, factory adjusted length to 2 C 4999 mm (39.4 to 96.8 ) ) - Extended cable, factory adjusted length 5 to 2 D 9999 mm (96.9 to ) ) - Extended cable, factory adjusted length 2 E to 4999 mm (393.7 to 59.5 ) ) - Extended cable, factory adjusted length 5 2 F to 9999 mm (59.6 to ) ) - Extended cable, factory adjusted length 2 2 G to 25 mm (787.4 to ) ) - Extended PF cable, length 3 mm (8. ), 3 ) and 2) - Extended PF cable, length 6 mm (236.2 ), 3 ) and 2) - Extended PF cable, length to 4999 mm 3 C (39.4 to 96.8 ) ) and 2) - Extended PF cable, length 5 to 9999 mm 3 D (96.9 to ) ) and 2) - Extended PF cable, length to 4999 mm 3 E (393.7 to 59.5 ) ) and 2) - Extended PF cable, length 5 to 9999 mm 3 F (59.6 to ) ) and 2) - Extended PF cable, length 2 to 25 mm 3 G ) and 2) (787.4 to ) Note: Verify that shield length selected in 7 and 8 is appropriate for the version selected. ¾ NPT [(Taper), NSI/SME.2.] 3) " NPT [(Taper), NSI/SME.2.] 3) ½ NPT [(Taper), NSI/SME.2.] C R ¾ [(SPT), EN 226/PT (JIS-T), JIS 23] 3) D R " [(SPT), EN 226/PT (JIS-T), JIS 23] 3) E R ½ [(SPT), EN 226/PT (JIS-T), JIS 23] F ¼ NPT [(Taper), NSI/SME.2.] K G ¾ [(SPP), EN ISO 228-/PF (JIS-P), L JIS 22] 3) G " [(SPP), EN ISO 228-/PF (JIS-P), M JIS 22] 3) G ½ [(SPP), EN ISO 228-/PF (JIS-P), N JIS 22] Pointek CLS3, threaded version 7 M L pprovals CS/FM Class II and III Div., Groups E, F, G T4 4) 2 CS/FM Class I Div., Groups,, C, D T4 4) 3 TEX II /2 D T C 4) 4 TEX II /2 G EEx d [ia] IIC T6 to T 4) 5 CS/FM Class II and III, Div, Groups E, F, G 6 T4 or T6; 5) TEX II /2D 2D T C 6) 7 E, F, G T4 or T6; TEX II G D /2D EEx ia IIC T6 to 5) and 6) T4 T C 8 E, F, G T4; TEX II /2GD EEx d [ia] IIC T6 to T T C 6) Not required Required 4) Enclosure (see also option ) luminum epoxy coated 2 x ½ NPT via adapter, cable inlet, IP65 2 x M2x.5 cable inlet, IP x ½ NPT via adapter, cable inlet, IP x M2x.5 cable inlet, IP68 4 dditional options Standard version 2 to 25 V C/DC, solid-state and relay output output and PROFIUS P 7) Please add -Z to and specify Order Total insertion length: enter the total insertion length Y Stainless steel tag [69 x 38 mm (2.7 x.5")]: Measuring-point number/identification (max. 2 charac- ters); specify in plain text Electrical connection/cable inlet: PROFIUS connector M26) and 8) Optional enclosure lid: Lid with glass window 4 instead of closed lid without window 9) cceptance test certificate: Manufacturer's test C certificate M to DIN 5535, Part 8 and ISO 9 Inspection Certificate Type 3. per EN 24 C2 SIL/IEC658 Declaration of Conformity [SIL 2 C2 (overspill)] 4) Extended ctive Shield (Y2) (standard length is 25 mm, not including threaded process connection length) ) ctive Shield length (Y2): 25 mm (min. insertion 7 length: rod, 475 mm, cable, mm) ctive Shield length (Y2): 4 mm (min. insertion 8 length: rod, 625 mm, cable, mm)

2 Pointek CLS3, threaded version 7 M L See page 5/4 ccessories See page 5/4 ) vailable with process connection C, F, J only 2) Do not select PF cable version if process temperature exceeds +2 C (+392 F). 3) vailable with Probe versions X, to D only 4) vailable with electronics option only 5) arrier required for Intrinsically Safe protection 6) vailable with electronics option only 7) n M2 PROFIUS connector can be selected separately with wildcard option. 8) vailable with enclosure option 2 only 9) Version with electronics option has a standard closed lid without window ) See dimension drawings on page 5/44 for further explanation of Y2.

3 Pointek CLS3, welded flange Note: To select Standard or Digital CLS3 (with PROFIUS P), see final place holder under. Probe version (length from flange face) Standard version, rod 35 mm (3.78 ) Extended rod, length 5 mm (9.69 ) Extended rod, length 75 mm (29.53 ) Extended rod, length mm (39.37 ) - Extended rod, length 25 to 999 mm (9.8 to 39.3 ) - Extended cable, length 3 mm (8. ), - Extended cable, length 6 mm (236.2 ), - Extended cable, length to 4999 mm (39.4 to 96.8 ) - Extended cable, length 5 to 9999 mm (96.9 to ) - Extended cable, length to 4999 mm (393.7 to 59.5 ) - Extended cable, length 5 to 9999 mm (59.6 to ) - Extended cable, length 2 to 25 mm (787.4 to ) - Extended PF cable, length 3 mm (8. ), ) - Extended PF cable, length 6 mm (236.2 ), ) 7 M L X C - Extended PF cable, length to 4999 mm (39.4 to 96.8 ) ) 3 C - Extended PF cable, length 5 to 9999 mm (96.9 to ) ) 3 D - Extended PF cable, length to 4999 mm (393.7 to 59.5 ) ) 3 E - Extended PF cable, length 5 to 9999 mm (59.6 to ) ) 3 F - Extended PF cable, length 2 to 25 mm (787.4 to ) ) 3 G Welded flange, 36L stainless steel, raised face " SME, 5 lb 2) " SME, 3 lb 2) 2 " SME, 6 lb 2) and 3) 3 ½" SME, 5 lb ½" SME, 3 lb 2 ½" SME, 6 lb 3) 3 2" SME, 5 lb C 2" SME, 3 lb C2 2" SME, 6 lb 3) C3 3" SME, 5 lb D 3" SME, 3 lb 3) D2 3" SME, 6 lb 3) D3 4" SME, 5 lb 3) E 4" SME, 3 lb 3) E2 4" SME, 6 lb 3) E3 D C 2 D 2 E 2 F 2 G 3 3 Pointek CLS3, welded flange 7 M L Welded flange, 36L stainless steel, Type flat faced DN 25, PN 6 2) J4 DN 25, PN 4 2) J6 DN 4, PN 6 K4 DN 4, PN 4 K6 DN 5, PN 6 L4 DN 5, PN 4 L6 DN 8, PN 6 M4 DN 8, PN 4 3) M6 DN, PN 6 3) N4 DN, PN 4 3) N6 (Note: Flange bolting patterns and facings dimensionally correspond to the applicable SME 6.5 or EN 92- standard.) pprovals CS/FM Class II and III Div., Groups E, F, G T4 4) 2 CS/FM Class I Div., Groups,, C, D T4 4) 3 TEX II /2 D T C 4) 4 TEX II /2 G EEx d [ia] IIC T6 to T 4) 5 CS/FM Class II and III, Div, Groups E, F, G T4 or 6 T6; 5) TEX II /2D 2D T C 6) 7 E, F, G T4 or T6; TEX II G D /2D EEx ia IIC T6 to 5) and 6) T4 T C 8 E, F, G T4; TEX II /2GD EEx d [ia] IIC T6 to T T C 6) Not required Required 4) dditional options Standard version Enclosure (see also option ) luminum epoxy coated 2 x ½ NPT via adapter, cable inlet, IP65 2 x M2x.5 cable inlet, IP65 2 x ½ NPT via adapter, cable inlet, IP68 2 x M2x.5 cable inlet, IP68 2 to 25 V C/DC, solid-state and relay output output and PROFIUS P 7) Please add -Z to and specify Order Total insertion length: enter the total insertion length Stainless steel tag [69 x 38 mm (2.7 x.5")]: Measuring-point number/identification (max. 2 characters); specify in plain text Electrical connection/cable inlet: PROFIUS connector M2 6) and 8) Optional enclosure lid: Lid with glass window instead of closed lid without window 9) cceptance test certificate: Manufacturer's test certificate M to DIN 5535, Part 8 and ISO 9 Inspection Certificate Type 3. per EN 24 SIL/IEC658 Declaration of Conformity [SIL 2 (overspill)] 4) Extended ctive Shield (Y2) (standard length is 5 mm) ) ctive Shield length (Y2): 23 mm (min. insertion length: rod, 475 mm, cable, mm) ctive Shield length (Y2): 38 mm (min. insertion length: rod, 625 mm, cable, mm) Y 4 C C2 C2 7 8 C D

4 Pointek CLS3, welded flange 7 M L See page 5/4 ccessories See page 5/4 ) Do not select PF cable version if process temperature exceeds +2 C (+392 F). 2) vailable with Probe versions X, to D only 3) Custom shipping methods required. Contact factory for more details. 4) vailable with electronics option only 5) arrier required for Intrinsically Safe protection 6) vailable with electronics option only 7) n M2 PROFIUS connector can be selected separately with wildcard option. 8) vailable with enclosure option only 9) Version with electronics option has a standard closed lid without window ) See dimension drawings on page 5/45 for further explanation of Y2.

5 Pointek CLS3, high temperature, threaded 7 M L Note: To select Standard or Digital CLS3 (with PROFIUS P), see final place holder under. Version (Threaded lengths include process thread.) Standard version, rod 35 mm (3.78 ) Extended rod, length 5 mm (9.69 ) Extended rod, length 75 mm (29.53 ) Extended rod, length mm (39.37 ) Extended rod, customer specified length (min. 25 mm (9.8 ) length, max. 999 mm (39.3 ) length) dd order code Y and plain text: "Insertion length...mm" Note: Verify that shield length selected in 7 or 8 is appropriate for the version selected. X C D 36L stainless steel ¾" NPT [(Taper), NSI/SME.2.] " NPT [(Taper), NSI/SME.2.] ½" NPT [(Taper), NSI/SME.2.] C R ¾" [(SPT), EN 226/PT (JIS-T), JIS 23] R " [(SPT), EN 226/PT (JIS-T), JIS 23] R ½" [(SPT), EN 226/PT (JIS-T), JIS 23] ¼" NPT [(Taper), NSI/SME.2.] K G ¾" [(SPP), EN ISO 228-/PF (JIS-P), JIS 22] G " [(SPP), EN ISO 228-/PF (JIS-P), JIS 22] G ½" [(SPP), EN ISO 228-/PF (JIS-P), JIS 22] pprovals CS/FM Class II and III Div., Groups E, F, G T4 ) 2 CS/FM Class I Div., Groups,, C, D T4 ) 3 TEX II /2 D T C ) 4 TEX II /2 G EEx d [ia] IIC T6 to T ) 5 CS/FM Class II and III, Div, Groups E, F, G T4 or T6; 2) TEX II /2D 2D T C 3) 6 E, F, G T4 or T6; TEX II G D /2D EEx ia IIC T6 to T4 T C2) and 3) E, F, G T4; TEX II /2GD EEx d [ia] IIC T6 to T T C 3) Not required Required ) Enclosure (see also option ) luminum epoxy coated 2 x ½ NPT via adapter, cable inlet, IP65 2 x M2x.5 cable inlet, IP65 2 x ½ NPT via adapter, cable inlet, IP x M2x.5 cable inlet, IP68 3 dditional options D E F L M N 7 8 Pointek CLS3, high temperature, threaded 7 M L to 25 V C/DC, solid-state and relay output output and PROFIUS P 4) Please add -Z to and specify Order Total insertion length: enter the total insertion length Stainless steel tag [69 x 38 mm (2.7 x.5")]: Measuring-point number/identification (max. 2 characters); specify in plain text Electrical connection/cable inlet: PROFIUS connector M23) and 5) Optional enclosure lid: Lid with glass window instead of closed lid without window 6) cceptance test certificate: Manufacturer's test certificate M to DIN 5535, Part 8 and ISO 9 Inspection Certificate Type 3. per EN 24 SIL/IEC658 Declaration of Conformity [SIL 2 (overspill)] ) Extended ctive Shield (Y2) [standard length is 25 mm (4.92 ), not including threaded process connection length] 7) ctive Shield length (Y2): 25 mm (9.84 ), [min. insertion length: rod 475 mm (8.7 ), cable mm (39.37 )] ctive Shield length (Y2): 4 mm (5.75 ). [min. insertion length: rod 625 mm (24.6 ), cable mm (39.37 )] Y 4 C C2 C2 7 8 See page 5/4 ccessories See page 5/4 ) vailable with electronics option only 2) arrier required for Intrinsically Safe protection 3) vailable with electronics option only 4) n M2 PROFIUS connector can be selected separately with wildcard option. 5) vailable with enclosure option only 6) Version with electronics option has a standard closed lid without window 7) See dimension drawings on page 5/44 for further explanation of Y2.

6 Pointek CLS3, high temperature, welded 7 M L flange Note: To select Standard or Digital CLS3 (with PROFIUS P), see final place holder under. Version (length from flange face) Standard version, rod 35 mm (3.78 ) X Extended rod, length 5 mm (9.69 ) Extended rod, length 75 mm (29.53 ) Extended rod, length mm (39.37 ) C Extended rod, customer specified length [min. D 25 mm (9.8 ) length, max. 999 mm (39.3 )length] dd order code Y and plain text: "Insertion length...mm" Note: Verify that shield length selected in 7 and 8 is appropriate for the version selected. Welded flange, 36L stainless steel, raised face " SME, 5 lb " SME, 3 lb 2 " SME, 6 lb ) 3 ½" SME, 5 lb ½" SME, 3 lb 2 ½" SME, 6 lb ) 3 2" SME, 5 lb C 2" SME, 3 lb C2 2" SME, 6 lb ) C3 3" SME, 5 lb D 3" SME, 3 lb ) D2 3" SME, 6 lb ) D3 4" SME, 5 lb ) E 4" SME, 3 lb ) E2 4" SME, 6 lb ) E3 Welded flange, 36L stainless steel, Type flat faced DN 25, PN 6 J4 DN 25, PN 4 J6 DN 4, PN 6 K4 DN 4, PN 4 K6 DN 5, PN 6 L4 DN 5, PN 4 L6 DN 8, PN 6 M4 DN 8, PN 4 ) M6 DN, PN 6 ) N4 DN, PN 4 ) N6 (Note: Flange bolting patterns and facings dimensionally correspond to the applicable SME 6.5 or EN 92- standard.) pprovals CS/FM Class II and III Div., Groups E, F, G T4 2) 2 CS/FM Class I Div., Groups,, C, D T4 2) 3 TEX II /2 D T C 2) 4 TEX II /2 G EEx d [ia] IIC T6 to T 2) 5 CS/FM Class II and III, Div, Groups E, F, G T4 or 6 T6; 3) TEX II /2D 2D T C 4) 7 E, F, G T4 or T6; TEX II G D /2D EEx ia IIC T6 to T4 T C3) and 4) 8 E, F, G T4; TEX II /2GD EEx d [ia] IIC T6 to T T C 4) Pointek CLS3, high temperature, welded 7 M L flange Not required Required 2) dditional options Enclosure (see also option ) luminum epoxy coated 2 x ½ NPT via adapter, cable inlet, IP65 2 x M2x.5 cable inlet, IP65 2 x ½ NPT via adapter, cable inlet, IP68 C 2 x M2x.5 cable inlet, IP68 D 2 to 25 V C/DC, solid-state and relay output output and PROFIUS P 5) Please add -Z to and specify Order Total insertion length: enter the total insertion length Y Stainless steel tag [69 x 38 mm (2.7 x.5")]: Measuring-point number/identification (max. 2 charac- ters); specify in plain text Electrical connection/cable inlet: PROFIUS connector M24) and 6) Optional enclosure lid: Lid with glass window 4 instead of closed lid without window 7) cceptance test certificate: Manufacturer's test C certificate M to DIN 5535, Part 8 and ISO 9 Inspection Certificate Type 3. per EN 24 C2 SIL/IEC658 Declaration of Conformity [SIL 2 C2 (overspill)] 2) Extended ctive Shield (Y2) [standard length is 5 mm (4.3 )] 8) ctive Shield length (Y2): 23 mm (9.6 ) [min. 7 insertion length: rod 475 mm (8.7 ), cable mm (39.37 )] ctive Shield length (Y2): 38 mm (4.96 ) [min. 8 insertion length: rod 625 mm (24.6 ), cable mm (39.37 )] See page 5/4 ccessories See page 5/4 ) Custom shipping methods required. Contact factory for more details. 2) vailable with electronics option only 3) arrier required for Intrinsically Safe protection 4) vailable with electronics option only 5) n M2 PROFIUS connector can be selected separately with wildcard option (). 6) vailable with enclosure option only 7) Version with electronics option has a standard closed lid without window 8) See dimension drawings on page 5/45 for further explanation of Y2.

7 English 7ML998-5CK4 German 7ML998-5CK34 French 7ML998-5CK4 Quick Start manual, multi-language C) 7ML998-5QF8 Note: Due to TEX regulations, one Quick Start manual is included with every product. ccessories ½ NPT cable gland, nickel plated brass, fits cable F) 7ML83-J diameter 6 to 2 mm (.24 to.47 ) -4 to + C (-4 to +22 F), IP68 (General Purpose) ½ NPT cable gland, brass, TEX II 2GD EEx d IIC F) 7ML83-J and EEx e II, fits cable diameter 6.5 to 4 mm (.26 to.55 ), -6 to +3 C (-76 to +266 F), IP68 (Explosion Proof) M2x.5 cable gland, P polyamide, TEX II 2G EEx e II, fits cable diameter 7 to 2 mm (.28 to.47 ), -2 to +7 C (-4 to +58 F), IP68 (General Purpose) F) 7ML83-JC M2x.5 cable gland, brass, TEX II 2GD EEx d IIC F) 7ML83-JD and EEx e II, fits cable diameter.5 to 5.9 mm (.4 to.63 ), under armour cable diameter 6. to.5 mm (.24 to.45 ), -6 to +3 C (-76 to +266 F), IP68 (Explosion Proof) One metallic cable gland M2x.5, -4 to +8 C (-4 to +76 F) F) 7ML93-P One metallic cable gland M2x.5, -4 to +8 C F) (-4 to +76 F) with integrated shield connection 7ML93-Q (available for PROFIUS P) lind threaded flanges are available. Please contact nacc.smpi@siemens.com with a completed application data sheet found on page 5/8. Spare parts Test magnet (digital version) 7ML83-JE mplifier/power supply, standard version C) 7ML83-DJ mplifier/power supply, digital version 7ML83-JF LCD display (digital version) 7ML83-JK C) Subject to export regulations L: N, ECCN: ER99 F) Subject to export regulations L: 9I999, ECCN: N