Symantec SIEM 9700 Series Appliances Product Description

Transcription

1 Symantec SIEM 9700 Series Appliances Product Description

2 Symantec SIEM 9700 Series Appliances Product Description The software described in this book is furnished under a license agreement and may be used only in accordance with the terms of the agreement. Documentation version: 1.0 Legal Notice Copyright 2011 Symantec Corporation. All rights reserved. Symantec and the Symantec Logo are trademarks or registered trademarks of Symantec Corporation or its affiliates in the U.S. and other countries. Other names may be trademarks of their respective owners. This Symantec product may contain third party software for which Symantec is required to provide attribution to the third party ( Third Party Programs ). Some of the Third Party Programs are available under open source or free software licenses. The License Agreement accompanying the Software does not alter any rights or obligations you may have under those open source or free software licenses. Please see the Third Party Legal Notice Appendix to this Documentation or TPIP ReadMe File accompanying this Symantec product for more information on the Third Party Programs. The product described in this document is distributed under licenses restricting its use, copying, distribution, and decompilation/reverse engineering. No part of this document may be reproduced in any form by any means without prior written authorization of Symantec Corporation and its licensors, if any. THE DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. SYMANTEC CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING, PERFORMANCE, OR USE OF THIS DOCUMENTATION. THE INFORMATION CONTAINED IN THIS DOCUMENTATION IS SUBJECT TO CHANGE WITHOUT NOTICE. The Licensed Software and Documentation are deemed to be commercial computer software as defined in FAR and subject to restricted rights as defined in FAR Section "Commercial Computer Software - Restricted Rights" and DFARS , "Rights in Commercial Computer Software or Commercial Computer Software Documentation", as applicable, and any successor regulations. Any use, modification, reproduction release, performance, display or disclosure of the Licensed Software and Documentation by the U.S. Government shall be solely in accordance with the terms of this Agreement.

3 Symantec Corporation 350 Ellis Street Mountain View, CA

4 Technical Support Contacting Technical Support Symantec Technical Support maintains support centers globally. Technical Support s primary role is to respond to specific queries about product features and functionality. The Technical Support group also creates content for our online Knowledge Base. The Technical Support group works collaboratively with the other functional areas within Symantec to answer your questions in a timely fashion. For example, the Technical Support group works with Product Engineering and Symantec Security Response to provide alerting services and virus definition updates. Symantec s support offerings include the following: A range of support options that give you the flexibility to select the right amount of service for any size organization Telephone and/or Web-based support that provides rapid response and up-to-the-minute information Upgrade assurance that delivers software upgrades Global support purchased on a regional business hours or 24 hours a day, 7 days a week basis Premium service offerings that include Account Management Services For information about Symantec s support offerings, you can visit our Web site at the following URL: All support services will be delivered in accordance with your support agreement and the then-current enterprise technical support policy. Customers with a current support agreement may access Technical Support information at the following URL: Before contacting Technical Support, make sure you have satisfied the system requirements that are listed in your product documentation. Also, you should be at the computer on which the problem occurred, in case it is necessary to replicate the problem. When you contact Technical Support, please have the following information available: Product release level

5 Hardware information Available memory, disk space, and NIC information Operating system Version and patch level Network topology Licensing and registration Customer service Router, gateway, and IP address information Problem description: Error messages and log files Troubleshooting that was performed before contacting Symantec Recent software configuration changes and network changes If your Symantec product requires registration or a license key, access our technical support Web page at the following URL: Customer service information is available at the following URL: Customer Service is available to assist with non-technical questions, such as the following types of issues: Questions regarding product licensing or serialization Product registration updates, such as address or name changes General product information (features, language availability, local dealers) Latest information about product updates and upgrades Information about upgrade assurance and support contracts Information about the Symantec Buying Programs Advice about Symantec's technical support options Nontechnical presales questions Issues that are related to CD-ROMs, DVDs, or manuals

6 Support agreement resources If you want to contact Symantec regarding an existing support agreement, please contact the support agreement administration team for your region as follows: Asia-Pacific and Japan Europe, Middle-East, and Africa North America and Latin America

7 Contents Technical Support... 4 Chapter 1 Introducing Symantec SIEM 9700 Series Appliances... 9 About SIEM 9700 Series Appliances... 9 SIEM 9700 Series appliance front and rear views SIEM 9700 Series appliance dimensions SIEM 9700 Series appliance hardware configuration SIEM 9700 Series appliance base configuration SIEM 9700 Series hardware structure SIEM 9700 Series slots SIEM 9700 Series appliance front panel SIEM 9700 Series appliance control panel SIEM 9700 Series appliance rear panel and ports SIEM 9700 Series appliance features Chapter 2 Technical specifications Technical specifications for the SIEM 9700 Series Appliances Environmental requirements for the SIEM 9700 Series Appliances Safety and EMC standards compliance for the SIEM 9700 Series Appliances Industry standards compliance for the SIEM 9700 Series Appliances Certifications for the SIEM 9700 Series Appliances Chapter 3 Hardware components SIEM 9700 Series appliance chassis Disk modules and drives Physical view Disk drive features Disk module LEDs SIEM 9700 Series appliance power modules SIEM 9751 and Gb FC HBA LEDs... 30

8 8 Contents SIEM 9700 Series appliance control panel Appendix A Appendix Abbreviations and Acronyms... 35

9 Chapter 1 Introducing Symantec SIEM 9700 Series Appliances This chapter includes the following topics: About SIEM 9700 Series Appliances SIEM 9700 Series appliance front and rear views SIEM 9700 Series appliance dimensions SIEM 9700 Series appliance hardware configuration SIEM 9700 Series appliance base configuration SIEM 9700 Series hardware structure SIEM 9700 Series slots SIEM 9700 Series appliance front panel SIEM 9700 Series appliance control panel SIEM 9700 Series appliance rear panel and ports SIEM 9700 Series appliance features About SIEM 9700 Series Appliances Symantec SIEM 9700 Series Appliances are scalable Security Information and Event Management appliances, offering assured performance with Symantec's Security Information Manager software. The SIEM 9700 Series Appliances are comprised of three models; the 9750, 9751, and Each provide features such as 3.9TB of redundant event storage, Enterprise connectivity via 8GB Fibre Channel (on the 9751 and 9752) and robust, dedicated out-of-band remote management

10 10 Introducing Symantec SIEM 9700 Series Appliances SIEM 9700 Series appliance front and rear views designed to enhance Symantec s already industry-leading ease-of-use and accelerate time-to-value Series physical appliances can also be combined seamlessly with virtual appliances ensuring full interoperability with the technology platforms of the modern Enterprise. The differences in the SIEM 9700 Series appliance models are as follows: SIEM contains no FC HBA card. SIEM contains a 2-Port 8 Gb FC HBA card. SIEM contains a 4-Port 8 Gb FC HBA card. See SIEM 9700 Series appliance features on page 18. SIEM 9700 Series appliance front and rear views The SIEM 9700 Series appliance is 2U high and contains 10 disk drives that have a 2.5 form factor. Eight of the ten drives are visible from the front of the unit. There are two internal, highly-available flash storage drives for the operating system. Figure 1-1 SIEM 9700 Series appliance front view Figure 1-2 SIEM 9750 Appliance rear view See SIEM 9700 Series appliance front panel on page 15. See SIEM 9700 Series appliance control panel on page 16. See SIEM 9700 Series appliance rear panel and ports on page 17.

11 Introducing Symantec SIEM 9700 Series Appliances SIEM 9700 Series appliance dimensions 11 SIEM 9700 Series appliance dimensions Dimensions of the SIEM 9700 Series appliance are as follows: Height Width Depth Weight without drives Weight with drives 8.7 cm (3.5 ) 43.0 cm (16.9 ) 70.4 cm (27.8 ) 29.5 Kg (65 lbs) 32.2 Kg (71 lbs) approximate The installation height (the space occupied by a SIEM 9700 Series appliance in a rack cabinet) is 2U (1U = 44.5 cm). The appliance can be installed in a rack cabinet that is 42 cm wide and 100 cm deep (or deeper). See About SIEM 9700 Series Appliances on page 9. SIEM 9700 Series appliance hardware configuration The following table describes the hardware configuration of the SIEM 9700 Series appliance. Table 1-1 Hardware configuration of the SIEM 9700 Series appliance Component Basic feature Processor type and quantity Memory Disk type and quantity RAID level Description 2U / eight disk slots Two Intel Xeon E GHz CPUs The SIEM 9700 Series appliance comes with 16 GB of memory. DDR3 8 x 600 GB, SAS hard disks Maximum raw capacity: 4.8 TB RAID 1 and RAID 5 System disk: RAID 1 (software RAID) Data disk: RAID 5 (RAID chip on mainboard)

12 12 Introducing Symantec SIEM 9700 Series Appliances SIEM 9700 Series appliance base configuration Table 1-1 Hardware configuration of the SIEM 9700 Series appliance (continued) Component I/O port Description One 100 Mbit/s IPMI management network port Two VGA ports: one on the front and one on the rear One RJ-11 serial port, with a transfer rate of 115,200 baud Five USB 2.0 ports (four on the rear and one on the front) Two GE in-band network ports, with the RJ-45 connector and link/active indicator See About SIEM 9700 Series Appliances on page 9. See SIEM 9700 Series appliance base configuration on page 12. See SIEM 9700 Series hardware structure on page 14. SIEM 9700 Series appliance base configuration The following table describes the SIEM 9700 Series base configuration. Table 1-2 SIEM 9700 Series base configuration Component Mounting Rails Description The product requires mounting rails. Standard Fully Extending Mounting Rails are included, PN (Intel AXXHERAIL2), and accommodate Standard Enterprise square hole 19 racks. Bezel style LEDs Cables Bezel is based on Symantec Plastic Bezel Design derived from 4U platform. Bezel accommodates LEDs from Intel platform and Local Control Panel into design. Grey 3M RJ-45 Cat 5E or better.

13 Introducing Symantec SIEM 9700 Series Appliances SIEM 9700 Series appliance base configuration 13 Table 1-2 SIEM 9700 Series base configuration (continued) Component Power Cords Description Two North America Power Cords are standard. For shipments to APJ, the following power cords are included: China UK Japan Australia For shipments to EMEA, include the following power cords: Japan UK EU South Africa For shipments to USA, the following power cord are included: North America (NA) PCI-E Cards SIEM 9751 factory integrated: QLogic 8 GB PCI-E dual port Fibre Channel HBA SIEM 9752 factory integrated: QLogic 8 GB PCI-E quad port Fibre Channel HBA See About SIEM 9700 Series Appliances on page 9. See SIEM 9700 Series appliance hardware configuration on page 11.

14 14 Introducing Symantec SIEM 9700 Series Appliances SIEM 9700 Series hardware structure SIEM 9700 Series hardware structure Figure 1-3 SIEM 9700 Series hardware structure A B C Disk Carriers (qty 8, labeled 0 through 7 from left to right) DVD ROM Control Panel See SIEM 9700 Series appliance control panel on page 16. See SIEM 9700 Series appliance hardware configuration on page 11. See SIEM 9700 Series appliance base configuration on page 12. SIEM 9700 Series slots The rear panel of the SIEM 9700 Series appliance contains five slots. Slot 3 is used by SIEM 9751 and 9752 for the Fibre Channel Host Bus Adapter (FC HBA) card. System fans and AC power connections are located on the right side of the rear panel. See SIEM 9700 Series appliance rear panel and ports on page 17.

15 Introducing Symantec SIEM 9700 Series Appliances SIEM 9700 Series appliance front panel 15 Figure 1-4 SIEM 9700 Series appliance rear panel slot assignments Slot usage is as follows: Slot 1 Slot 2 Slot 3 Slot 4 Slot 5 Not used Not used For SIEM 9751, 2-port FC HBA. For SIEM 9752, 4-port FC HBA. Not used Not used SIEM 9700 Series appliance front panel Figure 1-5 SIEM 9700 Series appliance front panel A GB SAS hard disk drive bays, labeled 0 to 7 from left to right Each module has 2 LEDs, one red and one green. The green LED flashes when drive activity occurs and is lit when no activity occurs. The red LED is lit when drive faults occur. B DVD ROM

16 16 Introducing Symantec SIEM 9700 Series Appliances SIEM 9700 Series appliance control panel Table 1-3 Indicator descriptions of the SIEM 9700 Series appliance front panel Location Type Color Status Description Chassis System power indicator Green On The device is powered on. n/a Off The device is not powered on. System alarm/location indicator Red On Flashing An alarm occurred on the device. A fault occurred on the power module. Orange On Locating the device a. A location command is sent through the management system. n/a Off The device is running normally. SAS disk module Disk activity indicator Green Green On Flashing The disk is powered on normally. Disk activity. n/a Off The disk is not powered on. Disk status indicator Red On Disk fault. n/a Off Normal operation. See SIEM 9700 Series appliance front and rear views on page 10. See SIEM 9700 Series appliance control panel on page 16. See SIEM 9700 Series appliance rear panel and ports on page 17. SIEM 9700 Series appliance control panel The front right side of the SIEM 9700 Series appliance contains a control panel. The On/Off switch for the device is located in the center of the control panel. Figure 1-6 SIEM 9700 Series appliance control panel

17 Introducing Symantec SIEM 9700 Series Appliances SIEM 9700 Series appliance rear panel and ports 17 See SIEM 9700 Series appliance front and rear views on page 10. See SIEM 9700 Series appliance front panel on page 15. See SIEM 9700 Series appliance rear panel and ports on page 17. SIEM 9700 Series appliance rear panel and ports Figure 1-7 SIEM 9700 Series appliance rear panel A B C D E F G H and I J K L Upper Power Supply Module Upper Power Receptacle Lower Power Receptacle Lower Power Supply Module Intel Remote Management Module NIC NIC2 Ethernet port (eth1) NIC1 Ethernet port (eth0) USB ports DB-9 Serial B Connector VGA Video RJ-45 Serial A Connector

18 18 Introducing Symantec SIEM 9700 Series Appliances SIEM 9700 Series appliance features Table 1-4 Indicator descriptions of the SIEM 9700 Series appliance rear panel Location Type Color Status Description Power module Power running/alarm indicator Green Green On Flashing The AC power is normal. The AC input is normal, and the device is not powered on. Orange On A power alarm occurred. n/a Off The power module failed or is not connected to the main power supply. Mainboard Fan running/alarm indicator Green On The fan is running normally. Red On A fan alarm occurred. Rear panel Link indicator of management network port Green On The link of the management network port is normal. n/a Off No link. Active indicator of the management network port Yellow n/a Flashing Off Data is being transferred. No data is being transferred. Link indicator of the service network port Green On Data is being transferred at a rate of 1,000 Mbit/s. Yellow On Data is being transferred at a rate of 100 Mbit/s. n/a Off Data is being transferred at a rate of 10 Mbit/s, or no link. Active indicator of the service network port Yellow n/a Flashing Off Data is being transferred. No data is being transferred. See SIEM 9700 Series appliance front and rear views on page 10. See SIEM 9700 Series appliance control panel on page 16. See SIEM 9700 Series appliance front panel on page 15. SIEM 9700 Series appliance features The following table describes key features of SIEM 9700 Series Appliances. See About SIEM 9700 Series Appliances on page 9.

19 Introducing Symantec SIEM 9700 Series Appliances SIEM 9700 Series appliance features 19 Table 1-5 Features of SIEM 9700 Series Appliances Feature Energy saving High performance and large capacity High reliability Easy management Description Supports disk soft start after power-on, controlling the disk startup current and reducing the overall power consumption of the device. Supports high-efficiency power modules, reducing power consumption. See SIEM 9700 Series appliance power modules on page 29. Supports intelligent fan speed control, reducing the power consumption of devices. Supports 8 disks inside the system. See Disk modules and drives on page 28. Supports high-performance processors with low-power consumption. Provides large-capacity intra-system switching bandwidths and high I/O throughout. Provides 16 GB of main memory. Supports RAID 0, 1, 5 and 6. Supports redundant power and fan modules. Supports hot-swappable disk modules and power modules. MTBF > 105 h. Provides separate out-of-band management network interfaces, allowing customers to remotely power on, power off, and reset devices through the network. Supports remotely configuring and managing devices through KVM over IP. Provides customized management interfaces, simplifying maintenance operations and saving maintenance labor. Supports DHCP and automatically obtains the IP address from the management server, thus reducing configuration operations. Supports SNMP trap and automatically reports alarms. Supports reporting the disk information through the out-of-band management channel.

20 20 Introducing Symantec SIEM 9700 Series Appliances SIEM 9700 Series appliance features

21 Chapter 2 Technical specifications This chapter includes the following topics: Technical specifications for the SIEM 9700 Series Appliances Environmental requirements for the SIEM 9700 Series Appliances Safety and EMC standards compliance for the SIEM 9700 Series Appliances Industry standards compliance for the SIEM 9700 Series Appliances Certifications for the SIEM 9700 Series Appliances Technical specifications for the SIEM 9700 Series Appliances The following table describes the specifications for the SIEM 9700 Series Appliances. Note: The maximum weight refers to the weight of the SIEM 9700 Series appliance with 10 disk modules, two power modules, eight memory modules, and 8 Gb FC HBA. Note: The transportation weight is the sum of the maximum weight of the SIEM 9700 Series appliance and the maximum weight of the transportation materials.

22 22 Technical specifications Environmental requirements for the SIEM 9700 Series Appliances Table 2-1 Specification Weight Dimensions Technical specifications for the SIEM 9700 Series Appliances Description Maximum weight: 34.5 kg Transportation weight: Approx. 50 kg 87 mm x 430 mm x 704 mm Power consumption Power parameters Inherent availability of the system MTTR (Mean Time to Repair) 750W maximum AC voltage range: 100 V to 127 V, 200 V to 240 V AC frequency range: 47 Hz to 63 Hz 99.95% < 1 h See About SIEM 9700 Series Appliances on page 9. See SIEM 9700 Series appliance dimensions on page 11. Environmental requirements for the SIEM 9700 Series Appliances The following table lists the requirements for the SIEM 9700 Series Appliances. Table 2-2 Component Environmental requirements for the SIEM 9700 Series Appliances Requirement Operating temperature Storage temperature Transportation temperature Temperature gradient Operating humidity Operating altitude Storage altitude Operating altitude Noise 10 C to 35 C (41 F to +95 F) -40 C to +70 C (-40 F to +158 F) -40 C to +70 C (-40 F to +158 F) 10 C/h 10% RH to 85% RH m to +3,000 m m to +3,000 m m to +3,000 m < 72 dba

23 Technical specifications Safety and EMC standards compliance for the SIEM 9700 Series Appliances 23 Note: When the altitude ranges from -60 m to +1,800 m, the ambient temperature ranges from 5 C to 35 C. When the altitude ranges from 1,800 m to 3,000 m, the environment temperature decreases by 0.6 C each time when the altitude increases by 100 m. Note: The maximum noise of the SIEM 9700 Series Appliances occurs when the ambient temperature is 25 C. See About SIEM 9700 Series Appliances on page 9. See Technical specifications for the SIEM 9700 Series Appliances on page 21. See Safety and EMC standards compliance for the SIEM 9700 Series Appliances on page 23. Safety and EMC standards compliance for the SIEM 9700 Series Appliances The following table describes the listed compliance standards for the appliances. Table 2-3 Standard Safety and EMC standards compliance for the SIEM 9700 Series Appliances Version IT Equipment safety standard IEC standard UL safety standard US EMC standard European safety standard European EMC directive European EMC standard European safety directive GB IEC UL FCC, 47 CFR Part 15, Subpart B EN EMC Directive 2004/108/EC EN 55024: 1998+A1+A2 LVD Directive 2006/95/EC See About SIEM 9700 Series Appliances on page 9.

24 24 Technical specifications Industry standards compliance for the SIEM 9700 Series Appliances Industry standards compliance for the SIEM 9700 Series Appliances The following table describes the industry compliance standards for the appliances. Table 2-4 Standard Ethernet standard FE standard GE standard Industry standards compliance for the SIEM 9700 Series Appliances Version IEEE IEEE 802.3u IEEE 802.3z IEEE standard test interface and boundary-scan architecture Failure mode and effects analysis (FMEA) Reliability, maintainability, and availability standard Environmental protection IEEE IEC 812 IEC 863 ECMA TR/70 See About SIEM 9700 Series Appliances on page 9. Certifications for the SIEM 9700 Series Appliances The following table describes the certifications that apply to the SIEM 9700 Series Appliances. Table 2-5 SIEM 9700 Series Appliances certifications Certification CB CCC CE Description The IEC System for Conformity Testing to Standards for Safety of Electrical Equipment (referred to as the IECEE) is based on the use of specific IEC standards for electrical equipment. The Certification Body (CB) Scheme applies to electrical equipment within the scope of IEC standards for safety, accepted for use in the IECEE. The purpose of the CB Scheme is to create one standard across countries and remove the international trade protection from certifications and standards of individual nations. CCC (China Compulsory Certification) is a standard addressing products relating to human health and safety, and environmental protection. CE (Conformite Europeenne) is a standard for Europe addressing RFI (EMC directive 2004/108/EC) and low voltage standards (directive 2006/95/EC).

25 Technical specifications Certifications for the SIEM 9700 Series Appliances 25 Table 2-5 SIEM 9700 Series Appliances certifications (continued) Certification C-tick FCC REACH RoHS Description The C-tick compliance label means that the product conforms with applicable EMC and radio communication requirements for Australia and New Zealand. Chapter 15 level A in FCC (Federal Communications Commission) Rules and Regulations applies to FRI standards for office computer equipment. Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH) is a European Council (EC) standard covering mandatory regulation of chemicals entering the European Union. The relevant regulation is EC 1907/2006. Restriction of the Use of Certain Hazardous Substances (RoHS) is a directive for environmental protection released by the EU in This regulation addresses limiting the maximum amount of hazardous materials present in the production of electronic equipment. UL WEEE UL (Underwriters Laboratories) is a non-profit safety test and certification organization. The EU Directive Waste of Electric and Electronic Equipment (WEEE) applies to the proper disposal of electronic waste. Compliant products show an upright wheeled trash bin with a large X over it. See About SIEM 9700 Series Appliances on page 9.

26 26 Technical specifications Certifications for the SIEM 9700 Series Appliances

27 Chapter 3 Hardware components This chapter includes the following topics: SIEM 9700 Series appliance chassis Disk modules and drives SIEM 9700 Series appliance power modules SIEM 9751 and Gb FC HBA LEDs SIEM 9700 Series appliance control panel SIEM 9700 Series appliance chassis Figure 3-1 SIEM 9700 Series appliance chassis physical view

28 28 Hardware components Disk modules and drives The chassis includes the following features: The air channels and holes in the chassis are used to dissipate heat for all components. Technical specifications for the chassis include the following: Dimensions (H x W x D): 87 mm x 430 mm x 704 mm. The chassis can be installed in a standard 48 cm (19 inch) rack cabinet or in a rack cabinet with a depth of 100 cm (or larger). See SIEM 9700 Series hardware structure on page 14. Disk modules and drives The SIEM 9700 Series appliance contains eight disk bays. Each bay can hold one disk module, which includes a disk carrier and a disk drive. Physical view The front panel of the SIEM 9700 Series appliance supports 8 hot swappable 2.5 form factor disk drives. The drives are labeled 0 through 7, from left to right. See SIEM 9700 Series appliance front panel on page 15. The SIEM 9700 Series appliance also contains two non hot-swappable internal, highly-available flash storage drives for the operating system. Figure 3-2 SIEM 9700 Series appliance disk modules (0 through 7)

29 Hardware components SIEM 9700 Series appliance power modules 29 Disk drive features The disk drives have the following features: The operating system of the SIEM 9700 Series appliance is installed on two internal, highly-available flash storage drives. The disk in slot 7 of the drive is designated as the hot-swappable disk. Provides storage capacity. Warning: When data is being read or written on disks, do not power off the device by turning off the power. Otherwise, the data on the disks may be damaged. To power off the device correctly, issue the shutdown command through the operating system, which invokes the proper operating system and hardware shutdown procedure. Disk module LEDs One disk inside a carrier defines the Disk Module. There are two LEDs on each disk module. One LED indicates disk status. The other LED indicates Power and/or Activity. LED Disk Status Power/Activity Power/Activity Power/Activity Table 3-1 Color/State Green Solid Green Solid Blue Not lit Flashing Green Disk module LEDs Indication Drive has been configured. System carrier contains a disk drive. The carrier does not contain a disk drive. Drive activity is in progress. Green = System See SIEM 9700 Series hardware structure on page 14. SIEM 9700 Series appliance power modules The rear panel of the SIEM 9700 Series appliance contains two power modules, one situated on top of the other. Each module has one AC power connector (socket) and an LED status indicator. See SIEM 9700 Series appliance rear panel and ports on page 17.

30 30 Hardware components SIEM 9751 and Gb FC HBA LEDs The power modules support hot swapping. A fault on one power module does not affect the normal running of the SIEM 9700 Series appliance. It is recommended to have both power modules attached to the main AC power source. If one module or source fails, the other module maintains power to the system without interruption. Figure 3-3 SIEM 9700 Series appliance AC power modules See SIEM 9700 Series hardware structure on page 14. SIEM 9751 and Gb FC HBA LEDs The 8 Gb FC HBAs connects the SIEM 9751 and 9752 to other network and storage devices. It can provide two or four HBA FC ports (depending on if you have SIEM 9751 or 9752). By using the HBA card (Fibre Channel), data can be exported from the SIEM 9751 or 9752 to a tape library for offline storage.

31 Hardware components SIEM 9751 and Gb FC HBA LEDs 31 Figure 3-4 SIEM 9751 with 2-port 8 Gb FC HBA Figure port 8 Gb FC HBA used by SIEM 9752 Table 3-2 Letter A Descriptions for the FC HBA Details LEDs Each port on the FC HBA card has one set of LEDs. Three LEDs labeled 8, 4 and 2 indicate the rate of data transfer (8-Gbit/s, 4-Gbit/s, or 2-Gbit/s). B Connectors Dual 8-Gbps Fibre Channel (FC) Connect using SFP+ with LC-style connector port cables Table port and 4-port 8 Gb FC HBA LED descriptions 8/Yellow 4/Green 2/Amber Description Off Off Off Power off. Off Off On/Flashing Data is being transferred at a rate of 2 Gbit/s.

32 32 Hardware components SIEM 9700 Series appliance control panel Table port and 4-port 8 Gb FC HBA LED descriptions (continued) 8/Yellow 4/Green 2/Amber Description Off On/Flashing Off Data is being transferred at a rate of 4 Gbit/s. On/Flashing Off Off Data is being transferred at a rate of 8 Gbit/s. On On On Power on (before firmware initialization). Flashing Flashing Flashing Power on (after firmware initialization). Flashing alternately Firmware error. SIEM 9700 Series appliance control panel This section provides a physical view and technical specifications for the control panel in the upper right corner of front panel of the SIEM 9700 Series appliance. Figure 3-6 SIEM 9700 Series appliance Control Panel Table 3-4 Letter A LED function LED function Hard Disk Activity Random flashing green light indicates hard disk drive activity (SAS). No light indicates no hard disk drive activity.

33 Hardware components SIEM 9700 Series appliance control panel 33 Table 3-4 Letter B LED function (continued) LED function NIC 1 Activity Continuous green light indicates a link between the system and the network to which it is connected. Flashing green light indicates network activity. C NIC 2 Activity Continuous green light indicates a link between the system and the network to which it is connected. Flashing green light indicates network activity. D System Status Solid amber indicates a critical or non-recoverable condition. Solid green indicates normal operation. Flashing green indicates degraded performance. Flashing amber indicates a non-critical condition. No light indicates POST is running or the system is off. E Power/Sleep Continuous green light indicates the system has power applied to it or the system is S0 state. Flashing green indicates the system is in sleep or ACPI S1 state. No light indicates the power is off or the system is in ACPI S4 or S5 state. F System identification Solid blue indicates system identification is active. No light indicates system identification is not activated. See SIEM 9700 Series hardware structure on page 14.

34 34 Hardware components SIEM 9700 Series appliance control panel

35 Appendix A Appendix This appendix includes the following topics: Abbreviations and Acronyms Abbreviations and Acronyms The following is a list of acronyms and abbreviations used in this document. AC Alternating Current BBU BIOS BMC Battery Backup Unit Basic Input/Output System Baseboard Management Controller CCC CE CPU CRU China Compulsory Certification Conformite Europeenne Central Processing Unit Customer Replaceable Unit DC DDR3 DHCP Direct Current 3rd Generation Double Data Rate SDRAM Dynamic Host Configuration Protocol

36 36 Appendix Abbreviations and Acronyms DIMM Dual Inline Memory Module ECC Error Checking and Correction FC FCC FRU Fibre Channel Federal Communications Commission Field Replaceable Unit GE Gigabit Ethernet HBA Host Bus Adapter IIC IOAT IPMI Inter-Integrated Circuit Input/Output Acceleration Technology Intelligent Platform Management Interface KVM Keyboard Video Mouse LC Lucent Connector MTBF MTTR Mean Time Between Failures Mean Time To Repair NIC Network Interface Card PCI-E Peripheral Component Interconnect Express

37 Appendix Abbreviations and Acronyms 37 RAID REACH RoHS Redundant Array of Independent Disks Registration, Evaluation, Authorization and Restriction of Chemicals Restriction of the Use of Certain Hazardous Substances SAS SATA SNMP Serial Attached SCSI Serial Advanced Technology Attachment Simple Network Management Protocol TOC Total Cost of Ownership UL USB Underwriters Laboratories Universal Serial Bus VGA Video Graphics Array

38 38 Appendix Abbreviations and Acronyms