SPYDER UNITARY CONTROLLER: BACNET

Transcription

1 SPYDER UNITARY CONTROLLER: BACNET The PUB1012S, 4024S, 38S, and 38SR Spyder controllers are part of the Phoenix Controls portfolio of unitary controllers designed to control HVAC equipment. These BACnet MS/TP network devices provide many options and advanced system features that allow state-of-the-art commercial building control. Each controller is programmable and configurable using the Phoenix Controls Workbench software. The controllers are for use in unitary and advanced HVAC control applications. The user chooses which function blocks to use and how to connect them; each function block s behavior is userdefined. Each controller contains a host micro-controller to run the main HVAC application and a second micro-controller for BACnet MS/TP network communications. Each controller provides flexible, universal inputs for external sensors, digital inputs, and a combination of analog outputs and digital outputs. FEATURES Interfaces with Theris /Traccel BACnet MS/TP room-level networks. EIA-485 communications network. Capable of baud rates between 9.6 and kbits/s. Capable of stand-alone operation if BACnet MS/TP network communications are not required. 1, 4, or 6 Universal Inputs; 3 to 11 Analog/Digital Outputs. Field configurable and programmable for control, input, and output functions. Function Block engine allows the application designer to program the controller for a wide variety of HVAC applications. All wiring connections are made to removable terminal blocks to simplify controller installation and replacement. DIN rail or panel mounting. SPECIFICATIONS Enclosure Plastic base plate and factory-snap-on cover; UL plenum rated. PUB1012S, PUB4024S: 6.25 x 4.81 x 2.26 in. (15.92 x x 5.74 cm); 0.56 lbs (0.255 kg) PUB38S, PUB38SR: 5.45 x 6.85 x 2.26 in. (13.84 x x 5.74 cm); 0.81 lbs (0.367 kg) Electrical Rated Voltage: Vac; 50/60 Hz, must be powered by Class 2 power source Power Consumption Controller Only: 10 VA (PUB1012S, PUB4024S) or 20 VA (PUB38S, PUB38SR) Maximum Load (Controller and All Devices it powers): 100 VA Interoperability B-ASC level device BACnet compliant on MS/TP LAN at up to 76.8 Kbps See Protocol Implementation Conformance Statement (PICS) BACnet is a registered trademark of ASHRAE PUBnnnnx Environmental Operating Temperature Range: Minimum -40 F (-40 C); Maximum 150 F (65.5 C) Storage Range: Minimum -40 F (-40 C); Maximum 150 F (65.5 C) Operating Humidity Range: 5% to 95% non-condensing CPU Specifications Specification Real Time Clock Operating Range: 24 hour, 365 day, multi-year calendar including day of week and configuration for automatic daylight savings time adjustment to occur at 2:00 a.m. local time on configured start and stop dates Power Failure Backup: 24 hours at 32 F to 100 F (0 C to 38 C), 22 hours at 100 F to 122 F (38 C to 50 C) Accuracy: ±1 minute per month at 77 F (25 C) Regulatory Compliance RoHS EU Contact Address: Honeywell GmbH Boeblinger Str Schoenaich Germany PUB 1012S PUB 4024S PUB 38S ATMEL ARM 7 32-bit 32-bit 32-bit 32-bit TI MSP430 N/A N/A 16-bit 16-bit PUB 38SR Flash Memory 512 KB 512 KB 372 KB 372 KB RAM 128 KB 128 KB 72 KB 72 KB TABLE OF CONTENTS Ordering Guide... 2 Applications... 3 Communications... 5 Installation... 5 Network Connections... 6 Troubleshooting Discovery Way Acton, MA Tel (978) Fax (978) Phoenix Controls. Specifications subject to change without notice. Rev. 05/17 MKT-0417 MPC-2297

2 ORDERING GUIDE PU B 38S PRODUCT FAMILY PU = Phoenix Unitary Spyder Controller MUNICATION B = BACnet SERIES 1012S = 1 UI, 0 DI, 1 AO, 2 DO, 200 function blocks 4024S = 4 UI, 0 DI, 2 AO, 4 DO, 200 function blocks 38S = 6 UI, 4 DI, 3 AO, 8 DO, 200 function blocks 38SR = 6 UI, 4 DI, 3 AO, 8 Relays, 200 function blocks INPUTS/OUTPUTS Each controller has a combination of Universal Inputs (UI), Digital Inputs (DI), Analog Outputs (AO), and Digital Outputs (DO). Use the following table for reference. Controller Configurations Controller Model Programmable Type Universal Inputs (UI) Digital Inputs (DI) Analog Outputs (AO) PUB1012S Unitary 1 * PUB4024S Unitary 4 * Digital Outputs (DO) PUB38S Unitary PUB38SR Unitary Relays * One Universal Input (UI-1*) is user selectable as a fast digital pulse meter. 2 OF 10 SPYDER BACNET CONTROLLER MKT-0417 MPC Phoenix Controls. Specifications subject to change without notice. Rev. 05/17

3 Universal Input (UI) Circuits Input Type Sensor Type Operating Range Room/Zone Discharge Air Outdoor Air Temperature 20K Ohm NTC -40 F to 199 F (-40 C to 93 C) Resistive Input Generic 100 Ohms to 100K Ohms Voltage Input Transducer, Controller 0 10 Vdc Discrete Input Dry Contact closure Open Circuit 3000 Ohms Closed Circuit <3000 Ohms Pulse Input b Counter/Meter Max. frequency: 15 Hz Min. pulse width: 20 ms b One Universal Input (UI-1*) on the PUB1012S and PUB4024S is user selectable as a fast digital pulse meter Digital Input (DI) Circuits Voltage Rating: 0 to 30 Vdc open circuit Input Type: Dry contact to detect open and closed circuit Operating Range: Open circuit = False; Closed circuit = True Resistance: Open circuit > 3,000 Ohms; Closed circuit < 500 Ohms Digital Triac Output (DO) Circuits Voltage Rating: 20 to Hz Current Rating: 25 ma to 500 ma continuous, 800 ma (AC rms) for 60 milliseconds Digital Relay Output (DO) Circuits (PUB38SR Only) Voltage Rating: 20 to Hz Current Rating: 0 ma to 1 A continuous, 3.5 A inrush (AC rms) for 100 milliseconds Analog Output (AO) Circuits Analog outputs can be individually configured for current or voltage. Analog Current Outputs Current Output Range: 4.0 to 20.0 ma Output Load Resistance: 550 Ohms maximum Analog Voltage Outputs Voltage Output Range: 0 to 10.0 Vdc Maximum Output Current: 10.0 ma Analog Outputs may be configured as digital outputs and operate as follows: False (0%) produces 0 Vdc, (0 ma) True (100%) produces the maximum 11 Vdc, (22 ma) APPLICATIONS The Spyder is programmable and may be used as: A standalone controller Physical sensors and switches may be connected to the Spyder, which then performs the desired control by using built-in functions (see section below) to switch or modulate Spyder outputs. An input/output (I/O) expansion module Physical sensors, switches and actuators may be connected to the Spyder and values passed across the room-level network to a Theris or Traccel valve-mounted BACnet controller for use in its control sequence. Data from the Spyder may also be passed across the building-level network to the BMS for monitoring purposes. A controller integrated into the Theris or Traccel system Data may be passed between the valve mounted controllers and Spyder on the room-level network to supplement the control functions of either device. An example might be interlocking door locks between an anteroom and a space under control so that doors may not be opened until the pressure stabilizes or a certain number of air changes have occurred.the Spyder may also be used to implement virtually any room-level control sequence that relies on inputs from physical sensors, switches or network based variables to develop the desired control output, function or interlock. Typical control applications include: Lighting Temperature (spaces adjacent to controlled spaces) Access 2017 Phoenix Controls. Specifications subject to change without notice. Rev. 05/17 MKT-0417 MPC-2297 SPYDER BACNET CONTROLLER 3 OF 10

4 Built-In Functions Built-in functions refer to any room-level control sequence relying on inputs from physical sensors, switches, or network-based variables that can be defined using the Spyder s programming toolbox of function blocks, built-in features, and utilities. Toolbox Analog Function Blocks Logic Function Blocks Math Function Blocks Control Function Blocks Data Function Blocks Zone Arbitration Built-in Features Utilities Description Latch, Average, Compare, Encode, Hysteretic Relay, Maximum, Minimum, Priority Select, Select, and Switch AND, One Shot, OR, and XOR Add, Digital Filter, Divide, Enthalpy, Exponential, Flow Velocity, Limit, Logarithm, Multiply, Ratio, Reset, Square Root, and Subtract AIA, Cycler, Flow Control, PID Rate Limit, Stager, and Stage Driver Alarm, Counter, Override, Run Time Accumulate, Priority Override General Set Point Calculator, Occupancy Arbitrator, Set Temperature Mode, and Temperature Set Point Calculator Schedule, Conventional Wall Module, and SBUS Wall Module PassThru, Macro, Application, and Text Block 4 OF 10 SPYDER BACNET CONTROLLER MKT-0417 MPC Phoenix Controls. Specifications subject to change without notice. Rev. 05/17

5 MUNICATIONS Each controller uses a BACnet MS/TP communications port. The controller s data is presented to other controllers over a twistedpair MS/TP network, which uses the EIA-485 signaling standard capable of the following baud rates: 9.6, 19.2, 38.4, 76.8, or kilobits per second (configured at global controller). The Spyder BACnet controllers are master devices on the MS/TP network. Each Spyder BACnet controller uses a high-quality EIA-485 transceiver and exerts 1/4 unit load on the MS/TP network. Cabling should be selected that meets or exceeds the BACnet Standard which specifies the following: an MS/TP EIA-485 network shall use shielded, twisted-pair cable with characteristic impedance between 100 and 130 ohms. Distributed capacitance between conductors shall be less than 100 pf per meter (30 pf per foot). Distributed capacitance between conductors and shield shall be less that 200 pf per meter (60 pf per foot). Foil or braided shields are acceptable. The BACnet MS/TP network is polarity sensitive. The maximum BACnet MS/TP network Bus segment length is 4,000 ft. (1,219 m) using recommended wire. Repeaters must be used when making runs longer than 4,000 ft. (1,219 m). A maximum of three repeaters can be used between any two devices. Supported BACnet Interoperability Building Blocks BIBB Service Initiates Responds To DS-RP-A/B ReadProperty X X DS-RPM-B ReadPropertyMultiple X DS-WP-A/B WriteProperty X X DS-WPM-B WritePropertyMultiple X DM-BR-B AtomicReadFile X DM-BR-B AtomicWriteFile X DM-BR-B ReinitializeDevice X DM-DDB-A/B Who-Is X X DM-DDB-A/B I-Am X X DM-DOB-B Who-Has X DM-DOB-B I-Have X DM-DCC-B DeviceCommunicationControl X DM-TS-B TimeSynchronization X DM-UTC-B UTCTimeSynchronization X INSTALLATION The controller must be mounted in a position that allows clearance for wiring, servicing, removal, connection of the BACnet MS/TP Molex connector and access to the MS/TP MAC address DIP switches. The controller enclosure is constructed of a plastic base plate and a plastic factory-snap-on cover. The cover does not need to be removed from the base plate for either mounting or wiring. Removable terminal blocks are used for all wiring connections, which allow the controller to be wired before or after mounting. Attach all wiring to the appropriate terminal block.s The controller can be mounted in any orientation. Ventilation openings are designed into the cover to allow proper heat dissipation, regardless of the mounting orientation. The Spyder controller can be mounted to either a panel or DIN rail (standard EN50022; 7.5 mm x 35 mm). See MKT-0422 Spyder(BACnet ) Installation Guide for detailed instructions Phoenix Controls. Specifications subject to change without notice. Rev. 05/17 MKT-0417 MPC-2297 SPYDER BACNET CONTROLLER 5 OF 10

6 NETWORK CONNECTIONS NOTE: Units for dimensions are in inches (mm) (57) DEEP (122) (105) (57) DEEP (122) (105) TERMINALS TERMINALS DO-2 DO-1 AO UI DO-2 DO-1 AO-2 AO-1 UI-4 UI-3 UI-2 UI (149) (149) (159) PUB1012S (159) PUB4024S 24VAC 1 24V 2 EGND 3 20VDC BAC+ SHIELD VAC 1 24V 2 EGND 3 20VDC BAC+ BAC- BAC- SHIELD DO-3 DO TERMINALS (57) TERMINALS (57) (57) DEEP (174) 6 29 (1) TERMINALS AO-1 AO-2 AO-3 DI-1 DI-2 DI-3 DI-4 20VDC UI-1 UI-2 UI-3 UI-4 UI-5 UI (128) 5 29 (139) PUB38S 24VAC 1 24V 2 EGND 3 SHLD BAC DO-1 DO-2 DO-3 DO-4 DO-5 DO-6 DO-7 DO TERMINALS 1-8 TERMINALS (57) (57) DEEP (174) 6 29 (1) TERMINALS AO-1 AO-2 AO-3 DI-1 DI-2 DI-3 DI-4 20VDC UI-1 UI-2 UI-3 UI-4 UI-5 UI (128) 5 29 (139) PUB38SR 24VAC 1 24V 2 EGND 3 SHLD BAC+ BAC- BAC V OUT 9 A 1 0 B C DO-C1 DO-A1 DO-A2 DO-A3 DO-B1 DO-B2 DO-B3 DO-B TERMINALS 1-8 TERMINALS (57) 6 OF 10 SPYDER BACNET CONTROLLER MKT-0417 MPC Phoenix Controls. Specifications subject to change without notice. Rev. 05/17

7 Spyder Relay - PUB6834SR Only The digital outputs of the Spyder with relay are designed differently and therefore are wired differently than the other Spyder products. The relay outputs are internally designed to provide up to 3 isolated banks of contacts. The factory installs removable jumpers between 24Vac and common of relay banks A (three outputs) and B (four outputs). The last relay remains isolated but could be jumped in the field if desired. The following diagram represents the internal schematic of the digital output circuitry. Relay Internal Circuitry 2017 Phoenix Controls. Specifications subject to change without notice. Rev. 05/17 MKT-0417 MPC-2297 SPYDER BACNET CONTROLLER 7 OF 10

8 Phoenix Controls Wiring Recommendations Recommended Cable Specifications All circuits must conform to the requirements of an NEC Power Minimum cable section 18 AWG Class 2 (dry) circuit. Use cable sizes recommended by Phoenix Controls (see Inputs Minimum cable section 20 AWG (twisted pair) table). Digital Outputs Minimum cable section 18 AWG Use wire for ease of installation. Follow good wiring practices: Analog Outputs Minimum cable section 20 AWG (twisted pair) Locate cables away from sources of electrical interference Maximum wire gauge is 14 AWG (2.0 sq mm) (EMI/RFI). Do not run signal or communication cable in the same conduit or wire way as power cables. If signal cable must cross power cables place these at a 90-degree angle. Shield or drain wires, if required, should be wrapped with insulating tape to prevent contact with exposed conductors or contacts. Maintain a consistent color code or polarity all the way through the wiring system. Power supply and signal isolation on I/O devices vary from manufacturer to manufacturer. Verify the wiring device manufacturer s recommendations for isolating power and signal common connections and maintain polarity. Local and national electrical codes take precedence. Strip 0.25" (6.4 mm) of insulation from each conductor, twist the strands, insert the conductor fully into the terminal block, and tighten the terminal. Test the wire connection by pulling on each conductor. See the Phoenix Recommenced Cables section for approved cable manufacturers and wire types. Power Connections The PUB1012S, 4024S, 38S, and 38SR may be powered by 24 Vac only. When locating the device, consider the location of the transformers/power supplies, cable runs, and connected load to ensure proper operating voltage. Each Spyder controller requires 24 Vac from a Class 2 transformer (i.e., no larger than 100 VA). A single transformer can power more than one Spyder controller. To calculate the required transformer power: - Sum together the power requirements of the controller(s) and all peripheral devices powered by it. - For peripheral devices the in-rush power ratings (i.e., worst case values) should be used. NOTE: See the Spyder (BACnet ) Installation Guide for detailed instructions. Input and Output Connections The Spyder supports a wide variety of universal inputs and analog and digital outputs. Signal input types are defined and scaled using the Phoenix Controls Workbench software. Two terminations are provided for each input. Power for inputs must be externally supplied. The Spyder will provide a ma power source for external sensor power. See the following section for wiring configuration. Note: Multiple power sources may be present. Ensure that all power is removed before handling bare conductors. 8 OF 10 SPYDER BACNET CONTROLLER MKT-0417 MPC Phoenix Controls. Specifications subject to change without notice. Rev. 05/17

9 PHOENIX CONTROLS REMENDED CABLES Cable Type 2C 2C Plenum Rated Function Wire Gauge Primary Vendor/Part # Alternate Vendor/ Part # Color Code No 24 Vac power 18 Belden : Red 2: Black 14 Belden 9411 Yes 24 Vac power 18 Belden Windy City NP Windy City NP : Red 2: Black Notes TSP No I/O signal wiring 22 Belden : Black&Red Twisted Shielded Pair 2 TSP No I/O signal wiring 22 Belden : Black&Red 2: Black&White 3C 3C or 4C 4C 5C No Signal 22 Belden : Red 2: Black 3: Green Yes Signal 22 Belden Windy City No Signal 22 Belden 8444 Manhattan M13304 No Signal 22 Belden 8445 Manhattan M C No Signal 22 Belden 9421 Manhattan M : Red 2: Black 3: Green 4: White (not used as 3C) 1: White 2: Green 3: Black 4: Red 1: White 2: Brown 3: Black 4: Red 5: Green 1: White 2: Orange 3: Black 4: Red 5: Green 6: Yellow 7: Blue 8: Brown 8C Yes Signal 22 Comtran : White 2: Orange 3: Black 4: Red 5: Green 6: Yellow 7: Blue 8: Brown 3C MS/TP 3C MS/TP No Shielded 22 Belden 3106A (120 ohm) Yes Shielded 22 Connect-Air W223C- 2060YPC 1: White with Orange stripe 2: Orange with White stripe 3: Blue with White stripe 1: Black 2: White 3: Red Two Twisted Pair, Shielded No substitutes No substitutes Shielded with drain Foil shield with drain wire 2017 Phoenix Controls. Specifications subject to change without notice. Rev. 05/17 MKT-0417 MPC-2297 SPYDER BACNET CONTROLLER 9 OF 10

10 TROUBLESHOOTING Status Information The LED on the front of the controller provides a visual indication of the status of the device. When the controller receives power, the LED appears in one of the following allowable states described in the following table. LED State Blink Rate Status or Condition OFF Not applicable No power to processor, LED damaged, low voltage to board, first second of power up, or loader damaged. ON Very slow blink (continuous) Slow blink (continuous) Medium blink (continuous) ON steady (not blinking) 1 second ON, 1 second OFF 0.5 second ON, 0.5 second OFF 0.3 second ON, 0.3 second OFF Processor not operating. Application Program CRC being checked. This takes 1-2 seconds and occurs on each restart (power up, reset and reflash, and following configuration file download). Controller is operating normally. Controller alarm is active or controller in process of configuration file download. Controller is in reflash mode or awaiting/receiving reflash data via the BACnet network. BACnet Status LED The LED on the front of the controller, between the BACnet MS/TP terminals and MAC Address DIP Switches, provides a visual indication of the BACnet MS/TP communication status. When the controller receives power, the LED appears in one of the following allowable states in the following table. BACnet LED Status Solid on Solid on, blinking off once in 2.5 sec. Solid on, blinking off twice in 2.5 sec. Solid on, blinking off three times in 2.5 sec. Solid off, there is no power Solid off, blinking on once in 2.5 sec. Solid off, blinking on twice in 2.5 sec. Solid off, blinking on three times in 2.5 sec. Status or Condition Controller has power, loader is not running. Controller is in reflash mode, no MS/TP communication. Controller is in reflash mode, MS/TP communication present. Controller is in reflash mode, MS/TP communication data transfer in progress. No power to processor, LED damaged, low voltage to board, or loader damaged. Controller is running, no MS/TP communication. Controller is running, MS/TP communication present. Controller is running, MS/TP communication data transfer in progress. 10 OF 10 SPYDER BACNET CONTROLLER MKT-0417 MPC Phoenix Controls. Specifications subject to change without notice. Rev. 05/17