enet SMART HOME connect QUICK START GUIDE

Transcription

1 enet SMART HOME QUICK START GUIDE

2 CONTENTS Preparation Page Creating a project Page 6 Creating a building structure Page 7 Searching for devices Page 9 Adding devices to a selected room and configuring them Page 0 - Device configuration using the example of a wall transmitter Page - Device configuration using the example of a switch actuator Page Creating ions Page 5 Programming the project in devices Page 2 Finalizing the project Page 24 2

3 PREPARATION Ensure that all enet devices are already installed. the operating mode selector switch is set to PC : the programming button is accessible, or alternatively the mains voltage can be switched off as desired. all batteries are inserted and devices with batteries are charged (e.g. solar sensor). the enet server is ed to the mains voltage and to the router via a network cable. PC or tablet with web browser are also in the same network. enet server and smartphone are in the same network. you have downloaded the enet SMART HOME app to your mobile phone.

4 PREPARATION Open the enet SMART HOME app and to the enet server. 0:05 Enter the displayed IP address in the web browser (PC or tablet) /... 4

5 PREPARATION / /... Log on Logged on Log onto the PC or tablet with username admin and password admin Username Password admin admin admin Start commissioning Log off Start commissioning Show password Stay logged on English English Log on 5

6 CREATING A PROJECT /... Please create a new project. Create project Specify the project name Project name Sample project Import project Change password Change the administrator password for security reasons Old password Show password New password Retype password Date and time Time 0:05 Date DD-MM-YYYY Transfer current time Time zone (UTC) CET - Central European Standard Time Automatic time (Internet) Select Automatic time Installation location This information is required for time control in ion with astro functions. Specify the installation location* Location Germany Lüdenscheid Manual Coordinates 5 8 N E Create project To next step * Location and time data are relevant for automatic functions. Automatic time requires an Internet ion 6

7 CREATING A BUILDING STRUCTURE /... Create and edit rooms and areas. Continue Go to next step 4 New area / new fl oor Top floor Bedroom Children s room Bathroom New room Create floors in the same order as they are to appear later on in the app 2 Ground floor Kitchen Hallway New room Add rooms to floors* Outdoors Garden Garage Balcony New room Rooms without area assignment New room * In the case of a flat, there is no need for you to create floors. It is sufficient to simply add new rooms. 7

8 CREATING A BUILDING STRUCTURE /... Rooms Devices Connections Project Diagnostics Please select a room Top floor Bedroom Children s room Bathroom Ground floor Select the room the devices you are adding in this step are installed in Kitchen Hallway Outdoors Garden Garage Balcony Rooms without area assignment 8

9 SEARCHING FOR DEVICES /... Back Select a room, detect and confi gure devices and channels. Continue Device search Catalogue Ground floor >> Start the device search Start search All devices Start the device search Add a device for the selected room. Switch the desired devices to programming mode. You can find information on this in the appropriate operating manuals. Select a room and add the desired devices found to the selected room. Assign a new device designation and change the channel designation and the channel location, if necessary. At the end: End the device search again. 2 Set the device installed in the selected room to programming mode 9

10 ADDING AND CONFIGURING DEVICES /... Back Select a room, detect and confi gure devices and channels. Continue Device search Catalogue Ground floor >> Stop the search as soon as all devices have been found Stop search All devices Switch/push-button actuator -gang mini Mini (fl ush-mounted) Add a device for the selected room. Centre plate Centre plate for bli control Add devices to the selected room Wall transmitter, - with inscription sp Wall transmitter Colour legend No device access Device not accessible or in an invalid Name Device not programmed or changes exist Device programmed, no changes exist 0

11 ADDING AND CONFIGURING DEVICES DEVICE CONFIGURATION USING THE EXAMPLE OF A WALL TRANSMITTER /... Rooms Devices Connections Project Diagnostics Device and channels Advanced device settings Wall transmitter, - with inscription sp Wall transmitter DEVICE LOCATION DEVICE DESIGNATION Door area Name the installation position of the transmitter Name the transmitter channels according to their function (this label appears in the app) CHANNEL NAME CHANNEL LOCATION FUNCTION OPERATING MODE Ceiling light Roller shutters Scene App use 6 Scene 2 App use Specify the purpose or function of the transmitter channel Shift device Program device Save Close Save entries

12 ADDING AND CONFIGURING DEVICES /... Back Add devices and edit their settings. Continue Device search Catalogue Ground floor >> Stop search All devices Switch/push-button actuator -gang mini Mini (fl ush-mounted) Wall transmitter, - with inscription sp Wall transmitter Door area Centre plate Add other devices needed in the room Centre plate for bli control 2

13 ADDING AND CONFIGURING DEVICES DEVICE CONFIGURATION USING THE EXAMPLE OF A SWITCH ACTUATOR /... Rooms Devices Connections Project Diagnostics Device and channels Advanced device settings Centre plate for b control DEVICE LOCATION DEVICE DESIGNATION Window Name the Installation position of the actuator CHANNEL NAME CHANNEL LOCATION FUNCTION OPERATING MODE Name the actuator channels according to their function (this label appears in the app) Window Please select Blind Roller shutters Awning Select a room in which the channel is active Specify the function and operating mode of the actuator channel Shift device Program device Save Close Save entries

14 ADDING AND CONFIGURING DEVICES /... 2 Back Add devices and edit their settings. Continue To next step Configure all devices in this way, room for room Device search Start search Start the device search Catalogue All devices Switch the desired devices to programming mode. You can fi nd information on this in the appropriate operating manuals. Select a room and add the desired devices found to the selected room. Ground floor >> Window Wall transmitter, - with inscription sp Wall transmitter Door area Centre plate for bli control Assign a new device designation and change the channel designation and the channel location, if necessary. Centre plate At the end: End the device search again. Balcony door 4

15 CREATING CONNECTIONS /... 2 Back Create and edit ions between devices. Continue All devices Ground floor >> New ion (Ground fl oor) [] Wall transmitter, - with inscription sp Wall transmitter Add a new ion. Select the room overview Door area Centre plate for bli control Window Centre plate Balcony door 5

16 CREATING CONNECTIONS /... Rooms Devices Connections Project Diagnostics Please select a room Top floor Bedroom Children s room Bathroom Ground floor Select a room in which the ions are to be created* Kitchen Hallway Outdoors Garden Garage Balcony Rooms without area assignment * The selection of the room is only intended to provide a better overview within the project. 6

17 CREATING CONNECTIONS /... 2 Back Create and edit ions between devices. Continue All devices Ground floor >> New ionction (Ground fl oor) [] Create a new ion* Wall transmitter, - with inscription sp Wall transmitter Add a new ion. Door area Centre plate for bli control Window Centre plate Balcony door * Connections are created, e.g. for the use of hand-held and wall-mounted transmitters 7

18 CREATING CONNECTIONS /... 2 Name the ions according to their function Back All devices Create and edit ions between devices. Ground floor >> Roller shutters Continue New ion Select a wall transmitter whose channel is to be used in the ion for operation (Ground fl oor) [] Wall transmitter, - with inscription sp Wall transmitter Door area Centre plate for bli control Sensors Delete Shift Program You can also program ions in groups at the end of commissioning. To do this, you can simply exit this page or create an additional ion. All the data is saved automatically. Actuators Window Add sensors. Add actuators. Centre plate Balcony door 8

19 CREATING CONNECTIONS /... Rooms Devices Connections Project Diagnostics Select channels Wall transmitter, - with inscription sp Wall transmitter Door area CHANNEL NAME CHANNEL LOCATION FUNCTION Ceiling light Rocker Select the required transmitter channel Roller shutters Rocker Apply Cancel Apply the ions 9

20 CREATING CONNECTIONS /... Back Create and edit ions between devices. Continue All devices Ground floor >> Roller shutters New ion Add the actuator whose channel is to be active in the ion (Ground fl oor) [] Door area Window Wall transmitter, - with inscription sp Wall transmitter Centre plate for bli control Centre plate Balcony door Sensors Delete Shift Program Wall transmitter, - with inscription sp Wall transmitter Door area Roller shutters You can also program ions in groups at the end of commissioning. To do this, you can simply exit this page or create an additional ion. All the data is saved automatically. Bitte fügen Sie Actuators hinzu Actuators 20

21 CREATING CONNECTIONS /... Rooms Devices Connections Project Diagnostics Select channels Centre plate for blinds control Window CHANNEL NAME CHANNEL LOCATION FUNCTION Select the actuator channel Window Roller shutters Apply Cancel Apply the ions 2

22 CREATING CONNECTIONS /... Proceed in this manner until all desired ions are created, then continue with the next step Back All devices Create and edit ions between devices. Ground floor >> Roller shutters Continue New ion (Ground fl oor) [] Wall transmitter, - with inscription sp Wall transmitter Delete Shift Program You can also program ions in groups at the end of commissioning. To do this, you can simply exit this page or create an additional ion. All the data is saved automatically. Door area Window Centre plate for bli control Centre plate Balcony door Sensors Wall transmitter, - with inscription sp Wall transmitter Door area Roller shutters Centre plate for bli control Window Window Actuators 22

23 PROGRAMMING THE PROJECT IN DEVICES /... Back Program all the changes, create the project report and backup the project. Changes have been made that can be programmed into the system: Program project 4 devices and 2 ions have not yet been programmed. Project name Sample project Last change DD-MM-YYYY 0:05:00 Program the devices, settings and ions Notes Radio communication between the enet devices is not encrypted. Activate encryption 2 Activate the encryption and create project report and backup copy Create project report Import project Export project 4 Compare project Delete project You can create additional users for the enet system in the user administration. You can also reach this via the System menu or the log-in screen. To user administration 5 Create additional users 2

24 FINALIZING THE PROJECT /... Back Program all the changes, create the project report and backup the project. Close the commissioning Changes have been made that can be programmed into the system: 4 devices and 2 ions have not yet been programmed. Program project Project name Sample project Last change DD-MM-YYYY 0:05:00 Notes Radio communication beween the enet device is not encrypted. Activate encryption Create project report Import project Export project Compare project Delete project You can create additional users for the enet system in the user administration. You can also reach this via the System menu or the log-in screen. To user administration 24

25 Gira Giersiepen GmbH & Co. KG Dahlienstrasse P.O. Box Radevormwald Germany Tel Fax info@gira.com Technical advice Gira Tel Fax hotline@gira.com JUNG Albrecht Jung GmbH & Co. KG Volmestraße Schalksmühle Germany Tel Fax international@jung.de Technical advice Jung Tel Fax international@jung.de Insta GmbH Hohe Steinert 0 P.O. Box Lüdenscheid Germany Tel info@insta.de Stand 06 /207