High definition, contrast and resolution of 96RGB x 64 pixels in compact screen and minimal frame

Transcription

1 SmartSwitch Frameless OLD Pushbutton DISTINCTIV CHARACTRISTICS High definition, contrast and resolution of 6RGB x 6 pixels in compact screen and minimal frame Range of 65,56 colors in 6 bit mode Operating life of 50,000 hours minimum Maximum use of display lens with ultra-thin frame provides full screen capacity Multiple units easily combine to form one screen, offering flexibility in size and layout Smooth, silent operation with short stroke of 0.07 lends to tactile feedback unparalleled to touch panels Same outer dimensions of switch and footprint, enabling ease of replacement with current switches Operated by commands and data supplied via serial communications (SPI) Incorporates bitmap display function Low energy consumption Dust tight construction Snap-in standoff for easy, secure mounting and alignment; aids in prevention of dislodging during wave soldering Viewing area:.mm x.7mm (horizontal x vertical) High reliability and long life of one million actuations minimum Highly reliable gold plated twin contacts poxy sealed straight PC terminals Actual Size

2 Frameless OLD Pushbutton SWITCH PART NUMBR & DSCRIPTION SWITCH SPCIFICATIONS Circuit OLD SPCIFICATIONS Characteristics of Display Display Device Display Mode Viewing Area Pixel Format Pixel Size Interface Absolute Maximum Ratings Items Symbols Ratings Supply Voltage for Logic/Interface V DD 0.V to +.0V Supply Voltage for Drive V CC 0.0V to +.0V Input Voltage V I 0.V to V DD +0.V Color OLD display module Passive matrix.mm x.7mm (horizontal x vertical) 6RGB x 6 pixels (horizontal x vertical) 0.mm x 0.mm (horizontal x vertical) Recommended Operating Conditions Supply Voltage for Logic/Interface SmartSwitch Part Number Switch Description OLD Pixel Format ISF5ACP Contact Position lectrical Capacity (Resistive Load) Contact Resistance Insulation Resistance Dielectric Strength Mechanical ndurance lectrical ndurance Operating Force Number of Colors Operating Temperature Range Storage Temperature Range Operating Life (Display) Current Consumption (Temperature at 5 C, V DD =.V, V CC = 5.0V) Items Symbols Min Typical Max All-Pixels-On Mode *Drive System Power Current All-Pixels-On Mode *Logic/IF System Power Current Sleep Mode **Drive System Power Current Sleep Mode **Logic/IF System Power Current SPST, Momentary ON Gold Contacts Straight PC Terminals I CC.0mA.mA I DD 0.7mA 0.0mA I CC 0μA I DD 0μA * All pixels shall be turned on with the maximum level gray scale ** All pixels shall be turned off (while chip is operating) SPST normally open Leave actuator: OFF Push actuator: ON V DC (resistive circuit) 00 milliohms 0mV 0mA 00 megohms 00V DC 5V AC for minute minimum,000,000 operations minimum,000,000 operations minimum.0 ± 0.5 Newtons Total Travel.mm (0.07 ) Serial (SPI) interface 65,56 Colors (6bit: R 5bit/G 6bit/B 5bit) or 56 Colors (bit: R bit/g bit/b bit) 0 C ~ +70 C ( F ~ +5 F) 0 C ~ +0 C ( F ~ +76 F) 50,000 00cd/m (based on 0% pixels ON; Ta = 77 F) Items Symbols Minimum Typical Maximum V DD.V.V.5V Supply Voltage for Drive V CC.0V 5.0V 6.0V Input High Level Voltage V IH 0. x V DD Input Low Level Voltage V IL 0. x V DD Optical Characteristics (Temperature at 5 C, Initial Value: 7 x 0F) Items Min Typical Max Unit Remarks Luminosity cd/m White (All pixels on) White Color Red Color Green Color Blue Color Color OLD Display Module 65,56 Colors (x) (y) (x) (y) (x) (y) (x) (y) Contrast Ratio 00 ATTNTION LCTROSTATIC SNSITIV DVICS 6RGB x 6 Pixels Horizontal x Vertical 5

3 SmartSwitch Frameless OLD Pushbutton BLOCK DIAGRAM & PIN CONFIGURATIONS TYPICAL SWITCH DIMNSIONS (.7).7 (0.5). Pixel Detail (.). (.). ISF5ACP Part No. This Side Standoff Detail Standoff = (.7).06 Dimension A VDD VCC RS 5 SCK 7 SS SDI 6 GND 0 SW Standoff = (.).0 SR, SG, SB...SR6, SG6,SB6 Segment Driver Gray Scale Decoder Graphic Display Data RAM 6 x 6 x 6 Bit MCU Interface Pin No. Symbol Name Function (.).05 (.6).00 (.07).00 (.0).007 (0.).00 A (.5).0 (.0) Dia Footprint Color OLD Panel 6RGB x 6 SG/COM Driving Block COM...COM6 Common Driver Oscillator Display Timing Generator Command Decoder SW Terminal of Switch Normally open SW Terminal of Switch Normally open V DD Power Power source for logic circuit SS Slave Select Slave select for SPI. This line is active low. RS Reset Reset signal input. When pin is low, initialization of chip is executed. Data/Command Data/Command Control. When pin is pulled low, data will be interpreted as Command; when pulled high, data will be interpreted as Data. SCK Serial Clock Clock line for SPI that synchronizes command and data SDI Serial Data In Data input line for SPI V CC Power Power source for drive circuit GND Ground Connect to Ground R R G B R (.).007 (.0).06 (.).0 (0.6).0 (0.).06 See Standoff Detail (.). OLD Driver with Controller SW Terminal numbers are not on the switch. (.0).70 Standoff Standoff (7.6) (6.0) (.0).76 Standoff Standoff (0.) Typ.0.76 x (0.75) Dia.00 (.0) 0.7 (.0).70 x (0.) Dia.05 (7.6).00 (6.0).60 x (.) Dia.05 Landless 6

4 Frameless OLD Pushbutton SmartSwitch TIMING SPCIFICATIONS AC Characteristics (Temperature at 5 C), V DD =.V ~.5V) State Number State Transition Transition Index Power ON Power OFF Display ON Display OFF Refer to "Power ON/OFF Sequence" 5 Initialization Initialize Setting of Command/Data 6 Items Symbols Minimum Typical Maximum Clock Cycle Time t cycle 50ns Setup Time t AS 0ns Hold Time t AH 0ns SS Setup Time t CSS 75ns SS Hold Time t CSH 60ns Write Data Setup Time t DSW 0ns Write Data Hold Time t DHW 0ns SCK Low Time t CLKL 75ns SCK High Time t CLKH 75ns SCK Rise Time t R 5ns SCK Fall Time t F 5ns STAT TRANSITION State Display Sleep V CC V DD Changing the Display 0 Power OFF OFF OFF OFF Disable Display OFF OFF ON ON ON nable Display ON ON OFF ON ON nable Image Rewriting Display Settings State 0 Power OFF (VCC, VDD OFF) : Power ON, 5 : Initialization : Power OFF Send Display Data Dimmer, Scroll, etc. SS SCK SDI tf State Display OFF (Sleep Mode) tdsw 5 : Initialization 6 : Display Switch V DD RS V CC SS SCK SDI 0V tas tcss tr tclkh tclkl tcycle tdhw D7 D6 D5 D D D D D0 : Display ON : Display OFF State 0 Power ON State Display ON 6 : Display Switch Power ON/OFF Sequence Initialization Setting State State Reset low pulse width Trw (minimum µs) tah tcsh Power OFF State 0 Minimum 0µs Minimum 0µs Minimum µs Minimum 0µs VDD level (due to SD protection circuit between VDD and VCC) H or L 7

5 SmartSwitch OLD Pushbutton & Display PRCAUTIONS FOR HANDLING & STORAG OF OLD PUSHBUTTONS & DISPLAY Handling. The IS Series OLD devices are electrostatic sensitive. To avoid damage to IC, do not touch terminals unless properly isolated from static electricity.. Signal input under conditions not recommended may cause damage to the OLD unit or deterioration of the display. Follow directions regarding supply sequences of power and signal voltages.. If the OLD panel is broken, avoid touching the contents. Wash off any contact to the skin or clothing.. Limit operating force to switch keytop to 00.0N maximum, as excessive pressure may damage the OLD. 5. For OLD display, it is necessary for bracket legs to be Grounded. 6. Recommended soldering time and temperature limits for OLD switch or display: Avoid temperatures exceeding 0 C at the OLD. Wave Soldering: see Profile A in Supplement section. Manual Soldering: see Profile A in Supplement section. 7. The IS series OLD devices are not process sealed.. Pixels acquire diminished brightness over time and use, and those most frequently habituated have greater reduction of brightness than those less used. To minimize this difference, operate OLD unit so that all pixels are used as consistently as possible.. For switch, clean cap surface with dry cloth. If further cleaning is needed, wipe with dampened cloth using neutral cleanser and dry with clean cloth. Do not use organic solvent. For display, avoid contact with any flux or detergent. If any liquids spill on display surface, immediately wipe with soft absorbent cloth. 0. Proper serial resistors and buffers for signals should be used to prevent noise problems. Storage. Store in original container and away from direct sunlight.. Keep away from static electricity. ATTNTION LCTROSTATIC SNSITIV DVICS. Avoid extreme temperatures, high humidity, gaseous substances, and all forms of chemical contamination.

6 SmartSwitch OPTIONAL ACCSSORIS AT70-05K Socket for LCD 6 x Pushbutton Materials: Base - Glass Fiber Reinforced PBT Terminals - Brass/Beryllium Copper The socket permits the SmartSwitch to be plugged in after automated processing. Use of the socket enables easy field replacement of the device. (0.).7 AT70-05L Socket for OLD Pushbutton Materials: Base - Glass Fiber Reinforced PBT Terminals - Brass/Beryllium Copper The socket permits the OLD SmartSwitch to be plugged in after automated processing. Use of the socket enables easy field replacement of the device. (0.).7 AT70-05M Socket for OLD Display Materials: (.).0 Base - Glass Fiber Reinforced PBT Terminals - Brass/Beryllium Copper (.6). (7.). (0.5) Dia Typ.00 The socket permits the OLD SmartDisplay to be plugged in after automated processing. Use of the socket enables easy field replacement of the device. (7.6).6 (.).0 (.).7 (.) (.).7 (7.). (0.5) Dia Typ.00 (0.5).00 DiaTyp (7.6).00 (7.6).00 (0.0). (6.) (5.5).07 (7.5).5 (.0) (.0) (6.0).6 Optional Accessories Compatible Part Number for AT70-05K Wide View LCD 6 x IS5BFPRGB (6.0).6.76 (.0).76 (.0) (.0) (5.5).07 (6.).66 (7.6).00 x (0.75) Dia.00 Compatible Part Numbers for AT70-05L OLD Pushbutton ISC5ANP (7.6).00 0x (0.75) Dia.00 Compatible Part Number for AT70-05M OLD Display ISC0P Frameless OLD ISF5ACP (0.0). x (0.75) Dia.00 50