Distinctive Characteristics
|
|
|
- Jade Holland
- 5 years ago
- Views:
Transcription
1 Distinctive Characteristics Subminiature size (/ size of Series M switches) saves space on PC boards. Specifically developed for logic-level applications. Totally sealed body construction prevents contact contamination and allows time- and money-saving automated soldering and washing. ward-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (dditional STC details in Terms & cronyms; see page Z.) Molded-in, epoxy sealed or ultrasonically welded terminals lock out flux, solvents, and other contaminants..00" x.00" terminal spacing conforms to standard PC board grid spacing. Matching indicators available and shown in the Indicator section. ctual Size
2 General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.V 8V C/DC maximum (pplicable Range 0.m ~ 0mV ~ 8V) Note: See Supplement Index (page Z) to find explanation of operating range. Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Force: Contact Timing: Travel: 0 milliohms maximum 00 megohms 00V DC 00V C minimum for minute minimum 0,000 operations minimum 0,000 operations minimum 0 grams Nonshorting (break-before-make) 0.7mm (") pretravel; 0.mm (.0") overtravel;.mm (.0") total travel Materials & Finishes Plunger: Case ousing: Support racket: Movable Contact: Stationary Contacts: Polyacetal Glass fiber reinforced polyamide Tin plated phosphor bronze Phosphor bronze with gold plating rass with gold plating Environmental Data Operating Temp Range: umidity: Vibration: Shock: -0 C through +8 C (- F through +8 F) 90 ~ 9% humidity for 9 0 C (0 F) 0 ~ z with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) Installation Cap Installation Force: 9.0N (. lbf) maximum downward force on actuator Soldering Time & Temperature: 0 C or 70 C Process Seal: See Supplement Index (page Z) for specific processing data. Standards & Certifications UL Recognition or CS Certification: The Series pushbuttons have not been tested for UL recognition or CS certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy.
3 TYPICL SWITC ORDERING EXMPLE P POLES SPST SPDT DPDT CIRCUITS OFF (ON) ON (ON) ( ) = Momentary P V V PC TERMINLS Straight Straight with racket Straight with Inline racket (SP only) Right ngle with racket Vertical with racket Vertical with Inline racket (SP only) * * C PLUNGERS." Long.8" Long.080" Long * vailable in single pole only. F CPS.0" Diameter.9" Diameter C CP COLORS lack White Red DESCRIPTION FOR TYPICL ORDERING EXMPLE P-." Long White Plunger lack.9" Diameter Cap Straight PC Terminals DPDT ON-(ON) Circuit
4 Pole Model POLES & CIRCUITS Plunger Position ( ) = Momentary Connected Terminals Throw & Schematics Normal Down Normal Down Note: Terminal numbers are not actually on the switch. SP OFF (ON) OPEN - SPST INTERNL CONNECTION SP ON (ON) - - SPDT () DP ON (ON) DPDT PLUNGERS." Long.0..8" Long (on SP only).0 (.).8 C.080" Long (on SP only).0 (.0).080 Standard Plunger Color: White Contact factory for red or black options. PC TERMINLS P Straight Straight with racket Right ngle with racket V Vertical with racket Typ (0.) (0.) Typ.0 Typ.00 (0.) (0.).0. Typ. Use of a support bracket or placement of the square bushing in a panel cutout increases PC mounting stability. & V terminal dimensions appear on the pushbutton drawings which follow. OPTIONL SLIP-ON CPS F T7.0" Diameter Cap Material: Polyamide For use with plungers & only. (.) Dia.0 (.)..0.7 T9.9" Diameter Cap Material: Polyamide For use with plungers & only. (7.) Dia.9 (.)..0.7 Colors vailable: lack White C Red
5 TYPICL SWITC DIMENSIONS Straight PC..97 (0.) Typ.0.0 (0.).0 (.) Dia (.) (.).77 (.)..00 (.). CL.8 (.0).09 (.0) Dia Typ.0 P-F model does not have terminal. Straight PC..97 (9.). (0.) Typ.0 (0.).0 (.) Dia (.) (.).8.0 (.)..00 (.) Dia Typ.0 P-F Straight PC racket (0.).0 (.) (.) Dia (0.).00. (0.).0 Typ (.) (.). (.). -F Terminals Terminals.8 (.0).09 (.).00 (.0) Dia Typ.0 (.).00 (.0) Dia Typ.0 Straight PC racket -F..97 (9.).7 (0.).0 (.) Dia.0.7 (.).8.00 (0.).00.0 (0.) Typ..0.0 (.) (.) (.)...8 Typ.00 Dia Typ.0 Right ngle PC (Single Throw) -F.97 (0.) Typ.0. (0.).0.8 (.) Dia (.)..9.0 (.). (.). (.8). Dia Typ.0
6 TYPICL SWITC DIMENSIONS Right ngle PC (Double Throw) -F.97 (0.) Typ.0. (0.).0.8 (.) Dia (.)..9.0 (.). (.). (.8) Dia Typ.0 Right ngle PC -F.97 (0.) Typ.0..8 (0.).0 (.) Dia (.).8 (.9).09.0 (.).0 (.).00 (.). (0.0).9 (0.) Typ (.).00 Dia Typ.0 Vertical PC Inline racket Vertical PC. (0.) Typ.0 (.0) (0.) (0.).0 (.) Dia.0.0 (.) Dia (.).7. V-F model does not have terminal. (.0) Typ (.) (.) (0.) Typ (.) (.0) (.) (.0) (.) (.) (.).0..9 V-F model does not have terminal. (.).9 (.).77 (.0).09 (.9)..0 (.).08 (9.7).8 (.0).09 (0.).0 (.0) Dia Typ.0 Dia Typ.0 Vertical PC V-F. (0.) Typ.0.97 (0.).0 (9.).7 (.) Dia (.) (.) (.).08 (.0) (.). (0.).0.00 Dia Typ.0
General Specifications
Series Process Sealed Subminiature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers General Specifications Electrical Capacity
Distinctive Characteristics
Distinctive Characteristics Ultra-miniature size allows high density mounting, and extremely light weight of 0. gram makes these switches ideal for handheld equipment. Totally sealed body construction
General Specifications
Series BB Process Sealed Subminiature Antistatic Pushbuttons General Specifications Electrical apacity (Resistive Load) Logic Level: 0.VA maximum @ 8V A/D maximum (Applicable Range 0.mA ~ 0.A @ 0mV ~ 8V)
Contents Rockers. A Series... B4 Process Sealed 0.4VA Logic Level Straight, Right Angle, & Vertical PC
Contents Rockers Toggles Rockers Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons A Series... 4 Process Sealed 0.4VA Logic Level Straight,
General Specifications
Series General Specifications Electrical Capacity (Resistive Load) Low/Logic Level: m @ V DC maximum for Standard Operating Force models m @ V DC maximum for igh Operating Force models Other Ratings Standard
Distinctive Characteristics
Low Profile Process Sealed Tactiles Series J Distinctive Characteristics Special bracket for right angle mounting provides added design variations. igher operating force type provides more pronounced operating
General Specifications
Series GT Process Sealed Ultra-Miniature SMT Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers General Specifications Electrical
Distinctive Characteristics
Distinctive Characteristics vailable in flat frame and bracketed PC mounting types. Over-center actuator block and plunger design gives crisp actuation with clear indication of circuit status; this design
Distinctive Characteristics
Distinctive Characteristics Top or side actuation permits flexible board design. Compact dimensions and low profile allow high density mounting and close stacking of PC boards. Crisp actuation positively
Distinctive Characteristics
Ultra-Miniature SMT Slides Series SS3 Distinctive Characteristics Compact dimensions and low profile allow high density mounting and close stacking of PC boards. Crisp actuation positively indicates circuit
6mm 3VA DC Power Level or 0.4VA Logic Level Straight PC PCB Mount. 6mm SMT 3VA DC Power Level & 0.4VA Logic Level Gull Wing Terminals Upright Mount
Contents Tactiles C Series... mm Process Sealed m Low/Logic Level PC Mount C Series...8 mm SMT Process Sealed m Low/Logic Level Gull Wing Terminals Upright Mount HP Series... mm V DC Power Level or.v Logic
General Specifications
Series M Slides Rotaries Programmable Illuminated P Pushbuttons eneral Specifications Electrical Capacity (Resistive Load) Power Level (silver): A @ 5V AC or A @ 50V AC; 4A @ 0V DC (On-On circuit) & A
General Specifications
Series M2 Process Sealed Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks eneral Specifications Electrical
General Specifications
Series F Ultra-Thin Process Sealed Tactiles General Specifications Electrical Capacity (Resistive Load) Low/Logic Level: m @ V DC Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength:
Distinctive Characteristics
Distinctive Characteristics Top or side actuation permits fl exible board design. Compact dimensions and low profile allow high density mounting and close stacking of PC boards. Crisp actuation positively
General Specifications
General Specifications Electrical apacity (Resistive Load) Low/Logic Level: m @ V D Other Ratings ontact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal
General Specifications
Miniature Rockers Slides Rotaries Programmable Illuminated P Pushbuttons eneral Specifications Electrical Capacity (Resistive Load) Power Level (silver): Logic Level (gold): Logic/Power Level (gold over
General Specifications
Series NP01 Subminiature Smooth ctuation Pushbuttons General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.4V maximum @ 28V C/C maximum (pplicable Range 0.1m ~ 0.1 @ 20mV ~ 28V) Other
Distinctive Characteristics
Distinctive Characteristics Low Profile Pushbuttons Series UB Bright, full face, or spot illumination with red, amber, or green single-element LEDs (an integral part of the switch), plus square or rectangular
General Specifications
Ultra-Miniature Slides General Specifications Electrical Capacity (Resistive Load) ower Level (silver): 0.A @ 0V DC Logic Level (gold): 0.VA maximum @ 8V AC/DC maximum (Applicable Range 0.mA ~ 0.A @ 0mV
General Specifications
Series M00 Tipped Toggles Toggles Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers General Specifications Electrical Capacity
General Specifications
Series CW Miniature Power Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks General Specifications CWS CWS CWT
General Specifications
Series M00 Tipped Toggles Toggles Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers General Specifications Electrical Capacity
Process Sealed Rotaries
New Product N-0 NR0 Series Process Sealed Rotaries Subminiature Rotaries with Positive, Distinctive Detent 07-07-7 Series NR0 Subminiature Process Sealed Rotaries General Specifications Electrical apacity
General Specifications
Half-Inch Diameter Process Sealed Rotaries Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles eneral Specifications Electrical
TYPICAL SWITCH ORDERING EXAMPLE BARRIER TYPES. R No Barrier B With Barrier CAP COLORS. A Black B Ivory. Red. H Gray INSCRIPTION ORIENTATION
TYPICAL SWITC ORDERING EXAMPLE JW L R C A M L RATINGS TV5 Rated 0A @ 5/50V AC TV8 Rated 6A @ 5/50V AC ARRIER TYPES R No arrier With arrier OUSING COLORS A lack POLES SPST SPDT * DPST DPDT * DPST must have
General Specifications
Series NP01 Subminiature Smooth ctuation Pushbuttons General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.4V maximum @ 28V C/C maximum (pplicable Range 0.1m ~ 0.1 @ 20mV ~ 28V) Other
0.4VA Logic Level Straight, Right Angle & Vertical PC. Extended & Piano Actuated DIP Slides 24V DC Straight PC
Contents Slides AS Series... 0.VA Logic Level Straight, Right Angle & Vertical PC CS Series... 0 A Power Level Straight PC PCB Mount FS Series... igh Frequency 90Mz to Gz Straight PC JS0, JS0 Series...
Distinctive Characteristics
Distinctive Characteristics Industry s first molded rocker with TV rating. Designed to handle large inrush current. JWM models certified for TV-5 rating and JWL models for TV-8 rating. Special 5A @ 7V
Distinctive Characteristics
istinctive haracteristics Low profile body of MRF model accommodates space limitations required for P mounting. For the MR and MRK bushing mount models, the range of behind panel body depths is. to. (.mm
General Specifications
Series M00 Tipped Rockers & Paddles Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks General Specifications Electrical
General Specifications
Slides Rotaries Programmable Illuminated P Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level: 5A @ 25/250V AC or 5A @ 30V DC Other Ratings Contact Resistance: 0 milliohms
General Specifications
Series CW Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks General Specifications CWS CWS Electrical Capacity Power Level:
CK Series...F3 16mm & 19mm High Security 3A Power Level Solder Lug Bushing Mount
Contents Keylocks Toggles A Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers CK Series... 6mm & 9mm High Security A Power Level
Standard Size Rotaries Series HS TS PS
Standard Size Rotaries Series HS TS PS GENERAL SPECIFICATIONS Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical
Standard Size Rotaries Series HS TS PS
Standard Size Rotaries Series HS TS PS GENERAL SPECIFICATIONS Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical
General Specifications
eries J0 & J0 Ultra-Miniature lide & Piano DIP General pecifications Electrical Capacity (Resistive Load) witching Rating: ma @ V DC Nonswitching Rating: 0.A @ 0V DC Other Ratings Contact Resistance: Insulation
General Specifications
Series SK General Specifications Electrical Capacity (Resistive Load) Power Level (silver): A @ 5V AC for low & medium security; A @ 50V AC for low security Other Ratings Contact Resistance: Insulation
Distinctive Characteristics
Distinctive Characteristics Full face, bright LED illumination in choice of red, green, and amber for visible status indication. 9-amp or 6-amp electrical capacity in compact body. Interior shield prevents
General Specifications
Series Illuminated Low Profile Process Sealed Tactiles Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles General Specifications
Standard Size Rotaries Series HS TS PS
Standard Size Rotaries Series HS TS PS GENERAL SPECIFICATIONS Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical
Distinctive Characteristics
Distinctive Characteristics Low Profile Pushbuttons Series UB Bright or super bright LEDs (an integral part of the switch) of red, amber, green, blue, or white, in full face or spot illumination plus square
Switches Unlimited Contact: Fax: GENERAL SPECIFICATIONS
Series HS TS PS 00--0 Fax: --0 Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Indexing: Contact Timing:
General Specifications
Series M Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks eneral Specifications Electrical Capacity
General Specifications
Series ND mm Process Sealed SMT DIP otaries eneral Specifications Electrical apacity (esistive Load) Switching ating: ma @ 5V D Nonswitching ating: ma @ 5V D Other atings ontact esistance: Insulation esistance:
日本轻触开关 jf- 带灯轻触开关 - 轻触开关规格贴片轻触开关英文说明书 pdf 防水轻触开关 x 无声轻触开关 x 带灯轻触开 Tactiles Contents S eries... mm Process Sealed m or m Low/Logic Level Straight or Ri
Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 日本轻触开关 jf- 带灯轻触开关 - 轻触开关规格贴片轻触开关英文说明书 pdf 防水轻触开关 x 无声轻触开关 x 带灯轻触开 Contents
Distinctive Characteristics
Tilt Switch Series DS Distinctive Characteristics DSA Environmentally friendly, contains no mercury. High contact reliability due to sealed body. The switch is triggered when tilted beyond ±10 of the horizontal.
General Specifications
Miniature Rockers Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators eneral Specifications lectrical Capacity (Resistive Load) Power Level (silver): Logic Level (gold):
Rockers Contents M S eries... Snap-in Mount A Power Level & 0.VA Logic Level Solder Lug, Quick Connect, Straight PC, & Wirewrap M S eries... 7 rackete
Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons 日本 NKK 官网的英文船型开关说明书 Contents Rockers A S eries... Process Sealed 0.VA Logic Level Straight, Right Angle, & Vertical PC
GENERAL SPECIFICATIONS FOR S1 ~ S29
Medium Capacity Standard Size GENERL SPECIFICTIONS FOR S ~ S9 (Resistive & Inductive Load) Power Level: Shown in the following tables 800--087 Fax: 78-7-70 Other Ratings Contact Resistance: Insulation
Medium Capacity Standard Size Toggles Series S
GENERAL SPECIFICATIONS FOR S ~ S9 (Resistive & Inductive Load) Power Level: Shown in the following tables Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life:
AZ420 MINIATURE GENERAL PURPOSE RELAY
MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 100 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available
D2VW. Sealed Miniature Basic Switch. Ordering Information Model Number Legend D2VW- -
Sealed Miniature Basic Switch Sealed Miniature Basic Switch Conforms to IP67 (Molded Lead Wire Type Only) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water
SERIES FEATURE MAX RATING MECHANICAL LIFE APPROVALS CIRCUITRY. B1 Ultra Small 2A 100,000 N/A SPST, SPDT
SWITCH SELECTION GUIDE Basic Switches SERIES FEATURE MAX RATING MECHANICAL LIFE APPROVALS CIRCUITRY (Resistive) B1 Ultra Small 2A 100,000 N/A SPST, SPDT B1-5 Levers 2A 1,000,000 N/A SPST, SPDT B2 Subminiature
8 Series Pushbutton Switches
8 Series Pushbutton Switches Features. Contacts Silver or gold-plated contacts.. Epoxy resin case UL94V-0 self-extinguishing epoxy. 3. Actuator style Over 30 actuator variations. 4. Insulation between
Key features: M8 Series BUCCANEER. Full Contact Diagrams Page 130
UCCNEER ulgin s M8 circular connectors and overmolded cables are designed to fulfil the ever growing demand for sensor, actuator and data connections in process control, industrial machinery and factory
APE A PE 2 F 2 M 10 Z. Subminiature Pushbutton Switches. Features. /Part Numbering. Page 253. Optional Accessories
Subminiature Pushbutton Switches RoHS RoHS Compliant 1. 2. 3. 4. 2.54mm 5. UL UL UL 0.4VA ACDC AC/DC60V 50mA AC/DC20mV 1A ULAC/DC48V 50mA 50m AC200V 1.5mA AC250V 1 500M DC500V 10,0000.4VA30,000 0.782.94N
Actuator Terminal Model
Sealed Snap ction Switch D2VW Watertight Miniature Snap ction Switch High-quality watertight, high-precision miniature Snap ction switch. Switch Body meets IP67 requirements Use of epoxy resin assures
Devices raised mounting
Devices raised mounting Illuminated pushbutton actuator Illuminated pushbutton actuator Front protection Switching system Contacts Diode (1N 47) Switching action Terminals b 18 x 18 mm Typ-Nr. a 18 x 24
XC5. DIN-style Twin-contact Connectors. Expanding the DIN Concept. Materials and Finish. Ratings and Characteristics
DIN-style Twin-contact Connectors Expanding the DIN Concept Mates with DIN connectors. Ideal for automated soldering because the Connectors sit on top of the board. Mounting dimensions of the DIN Style-1
Quick-connect terminals (#110)
Sealed Subminiature Basic Switch D2SW-P Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealed to IEC IP67. Switch rating of 2 at 250 VC possible with a single-leaf
L Series Miniature Slide Switches
Features/Benefits Positive detent Enclosed housing Maintained and momentary functions PC and panel mounting RoHS compliant Typical Applications Communications equipment Lighting devices Models Available
A16. Separate Construction with Cylindrical 16-dia. Body. Pushbutton Switch (Detachable) (Lighted/Non-Lighted) (Cylindrical 16-dia.
Pushbutton Switch (Detachable) (Lighted/Non-Lighted) (Cylindrical 16-dia.) Separate Construction with Cylindrical 16-dia. Body Miniature design of 28.5 mm, the smallest class in the industry. Detachable
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
PUSH BUTTON SWITCHES(Momentary)
PUSH BUTTON SWITCHES(Momentary) Series - 7 DESCRIPTION Integral Series7 Push Button Switches is a unique design wherein the operative portion is separate from the Switch Element.The Basic Switch Series
(MR) Miniature Rectangular Connectors (Continued)
Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug
Series Single and double-pole rocker switches
H Series 1800 - Single and double-pole rocker switches Rocker switches Product features 100 million times proven switching principle High, flexible design variety Excellent actuating characteristic Illuminated
Commercial MATE-N-LOK Connectors
MP Commercial MTE-N-LOK Connectors Product Facts Fully polarized nylon housings Easy cavity identification Locking devices are integral part of design. Connector halves will hold together under severe
Push Button Switches. Switches 163. Miniature, round and rectangular push button switches available
Push utton Switches ulgin s broad line of pushbutton switches are available in various sizes and configurations. This includes a variety of illumination and terminal options as well as several with high
RTE02 and RTE03 Miniature Rotary Switches
RTE02 and RTE03 Miniature Rotary Switches RTE02 and RTE03 are two types of a subminiature rotary changeover switch to be mounted on PC boards. PC pins are in a 2.54 mm (0.100) grid. RTE02 with 2 positions
.093 Commercial Pin and Socket Connectors
Product Facts Polarised Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel-mounting
Add S to the end of the model number for the UL/CSA-approved version. Consult your OMRON sales representative for details.
Sealed Subminiature Snap ction Switch D2HW Smallest Sealed Snap-ction Switch in the Industry With a Long Stroke For Reliable ON/OFF ction Conforms to IP67 Case dimensions 22% smaller than conventional
Key features: M5 Series. Buccaneer. Full Contact Diagrams Page 120
The most compact connector type in the MSeries range, Bulgin s waterproof M5 sensor connectors come in straight and angled forms with or overmolded cable option s and a variety of panel mount receptacles.
HMI Components. Series. Pushbutton Illuminated pushbutton. Audio and video mm mm mm
Edition 12/2014 HMI Components 95 Series Characteristics The Series 95 PCB pushbuttons can be used in combination with 1.5 to 2.5 mm PCBs. The buttons are selfattaching until they are soldered. Depending
Electrical Components Catalog Universal MATE-N-LOK Connector System
Introduction Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation
Ordering Information. Door Interlock Switch D2D. Power Switch with Minimum Contact Gap up to 3 mm. D2D - 0. Model Number Legend
Door Interlock Switch D2D Power Switch with Minimum Contact Gap up to 3 mm. Minimum contact gap of 3 mm (standard models), needed in general power switches, is provided. Mechanism with double return spring
Push Button Switches. 186 Switches. Miniature, round and rectangular push button switches available
Push utton Switches ulgin s broad line of pushbutton switches are available in various sizes and configurations. This includes a variety of illumination and terminal options as well as several with high
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Power Connectors FEATURES AND SPECIFICATIONS Features and Benefits Positive
Toggle Switches Toggle Switches Elico - Toggle Switch
Toggle Switches Elico - Toggle Switch 0.4 A@ 28VDC / 1.5 A @ 250VAC / 3 A @ 250 VAC / 6 A @ 250VAC Actuator Size: Standard Toggle / Short Toggle / Bulldog Toggle / Caped Long Toggle / Standard Plunger
Devices raised mounting
Devices raised mounting Illuminated actuator pushbutton Front protection Switching system Ø 29 mm Contacts Typ-Nr. e Illuminated actuator pushbutton IP 67 LL 1 NC - MA UT 14-476.36 1 4 17 12.15 M UT 14-436.36
Top-actuated (B3U-1000 Series)
Ultra-small Tactile Switch BU Ultra-small-sized Tactile Switch with High Contact Reliability: 1.2 x x 2.5 mm (H x W x D) Industry s smallest switch* allows high-density mounting on PCBs for mobile equipment.
D2D. Door Interlock Switch. Ordering Information. Power Switch with Minimum Contact Gap of 3 mm. Model Number Legend.
Door Interlock Switch Power Switch with Minimum Contact Gap of 3 mm Offers the minimum contact gap of 3 mm required for power switches as standard equipment. Highly reliable design conforms to European
7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
NEW 7.9 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits
Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers
Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers Miniature Hydraulic/Magnetic Circuit Breaker M-Series M-Series PDF elibrary The M-Series miniature hydraulic/magnetic circuit breakers
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
SERIES SUBMINIATURE SNAP-ACTION SWITCHES
PRODUCT FEATURES Small, effi cient snap-action switch up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator Large selection
16 g SS-01GL-FD SS-01GL-F SS-01GL-FT 50 g SS-01GLD SS-01GLD1 SS-01GLD2 SS-01GL SS-01GLT Simulated roller lever
Snap Action Switch SS Subminiature Snap Action Switch Economical, subminiature snap action switch offers long service life (30 million operations minimum) All models are free from overtravel restrictions,
ILLUMINATED PUSHBUTTON SWITCH
Jay-El P/N 10888 JAY-EL 10888 JAY-EL P/N 10888 ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S-2288 Catalog No. 081 11-03 GOLD CONTACTS Sea Level and 0,000 Feet JAY-EL 10888 ENGINEERING SPECIFICATIONS
series Subminiature snap-action switches
Rocker switches Product features Small, efficient snap-action switches up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator
JAY-EL JAY-EL P/N ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S-22885
Jay-El P/N JAY-EL JAY-EL P/N ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S- Catalog No. - For more information, contact our sales team at.. or hmisales@ducommun.com GOLD CONTACTS Sea Level
Mini-Universal MATE-N-LOK 2 Connectors
MP Mini-Universal MTE-N-LOK 2 Product Facts One molded piece, secondary locking plug and cap housing assemblies Three-point stabilization to provide better terminal position Fully polarized to provide
Construction. Mechanical data Number of Contacts 6, 8 or 16. Electrical data Insulation resistance Contact resistance max. Switch contact resistance
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 45 CCM04 MKII The CCM04 without card guidance is used where space is at a premium and the card guidance can be built around the connector (rather than provided
SERIES 16, 26 & 18 MICROSWITCH
SERIES 16, 26 & 18 MICROSWITCH SERIES 16 & 26 FEATURES Form Z contacts to cover all switching requirements Snap action for positive switching Solder terminals for superior electrical contact Choice of
D2SW-3L1HS D2SW-01L1HS
Sealed Snap Action Switch D2SW Watertight Miniature Snap Action Switch High-quality watertight miniature Snap Action switch. Switch Body meets IP67 (IEC 529) requirements Monoblock construction assures
Distributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings
Contact form. Operating Force. Plunger SPDT 204g Dust- Proof (in closed position) Plunger SPST-NC 204g Dust- Proof (in closed position)
D3D Miniature Door Switch Appliance industry standard plunger and lever actuator styles High contact reliability ensured using gold alloy crossbar contacts Drip/spill sealing in free position (plunger
D2F. Ultra Subminiature Basic Switch with plenty of terminal variations. Model Number Legend. Ultra Subminiature Basic Switch
Ultra Subminiature Basic Switch with plenty of terminal variations Incorporating a snapping mechanism made with two highly precise split springs that ensures long durability. Using insertion molded terminals
D-Sub SEaled subminiature D connectors, 2.54 mm pitch
SE D-Sub SEaled subminiature D connectors, 2.54 mm pitch Page Technical characteristics.......................................... 02 IP 67 versions with turned solder cups......... 04 IP 67 versions with
Miniature Basic Switch
Miniature Basic Switch Reliable and Safe Basic Switch Self-cleaning contacts. Best-seller Switches with switching currents of 10 to 21 A. Can be used for shutting down current in doors. Widely used for
Pin plunger D2JW-011 D2JW-011-MD. Short hinge lever D2JW-01K1A1 D2JW-01K1A1-MD. Hinge lever D2JW-01K11 D2JW-01K11-MD
Sealed Snap ction Switch DJW Immersion-Proof Subminiature Snap ction Switch Ultra-small and highly sealed Water-tight housing conforming to IEC IP67 Wide range of operating temperature from -40 to 85 C