General Specifications
|
|
- Jason Watson
- 5 years ago
- Views:
Transcription
1 Series BB Process Sealed Subminiature Antistatic Pushbuttons General Specifications Electrical apacity (Resistive Load) Logic Level: 0.VA 8V A/D maximum (Applicable Range 0.mA ~ 0mV ~ 8V) Note: Find additional explanation of operating range in Supplement section. Other Ratings ontact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Force: ontact Timing: Travel: Materials & Finishes Plunger: Bushing: ase Housing: Support Bracket: Movable ontact: Stationary ontacts: Terminals: Environmental Data Operating Temp Range: Humidity: Vibration: Shock: Installation ap Installation Force: PB Processing Soldering: leaning: Standards & ertifications Flammability Standards: 0 milliohms maximum 00 megohms 00V D 00V A minimum for minute minimum 0,000 operations minimum (momentary),000 operations minimum (alternate action) 0,000 operations minimum (momentary),000 operations minimum (alternate action).n (momentary);.9n (alternate action) Nonshorting : Pretravel.08 (0.7mm); Overtravel.0 (0.mm); Total Travel.0 (.mm) Alternate: Pretravel.09 (.0mm); Overtravel.09 (.0mm); Total Travel.079 (.0mm) Polyacetal arbon blended polyamide Glass fiber reinforced polyamide Tin plated phosphor bronze Phosphor bronze with gold plating opper alloy with gold plating opper alloy with gold plating 0 through +8 ( F through +8 F) 90 ~ 9% humidity for 9 0 (0 F) 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) 9.0N (. lbf) maximum downward force on actuator; actuator must be in UP position to remove cap from alternate action models Wave Soldering Recommended: See Profile A in Supplement section. Manual Soldering: See Profile B in Supplement section. Automated cleaning. See leaning specifications in Supplement section. UL9V-0 available The BB Series pushbuttons have not been tested for UL recognition or SA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy.
2 Process Sealed Subminiature Antistatic Pushbuttons Series BB Distinctive haracteristics Subminiature size (/ size of Series M switches) saves space on P boards. Specifically developed for logic-level applications. Available in momentary and maintained circuits. Industry s smallest alternate action (maintained) pushbutton with latchdown feature providing visible, audible, and tactile feedback. Antistatic superstructure, consisting of the carbon impregnated bushing and the support bracket, prevents static discharge to the contacts. Static electricity from an operator s touch travels from the actuator through the bushing and bracket to the P board. Award-winning ST contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (Additional ST details in Terms & Acronyms; see Supplement section.) Smooth, mm diameter bushing simplifies panel layout. Totally sealed body construction prevents contact contamination and allows time- and money-saving soldering and cleaning. x (.mm x.mm) terminal spacing conforms to standard P board grids. Actual Size
3 Series BB Process Sealed Subminiature Antistatic Pushbuttons BB Poles SPDT DPDT ircuits () ( ) = Alternate Action has Latchdown. BB has a Double Pole case. A TYPIAL SWITH ORDERING EXAMPLE Plunger. (.mm) Long DESRIPTI FOR TYPIAL ORDERING EXAMPLE Black.0 (.mm) Diameter ap A H F A. (.mm) Long White Plunger P BBAH-FA P Terminals Straight * B Straight with Bracket * H Right Angle with Bracket * V Vertical with Bracket W Straight Long * Bracketed models are ESD protected F aps.0 (.mm) Diameter H.9 (7.mm) Diameter SPDT -() ircuit Right Angle P Terminals A B ap olors Black White Red
4 Process Sealed Subminiature Antistatic Pushbuttons Series BB Pole SP DP A. (.mm) Long Standard Plunger olor: White ontact factory for other colors and lengths. Both single pole and double pole alternate action models have double pole bases. See Typical Switch Dimensions for details. H F Model BB BB BB BB Right Angle with Bracket (0.) (0.).0 (0.) Typ.00 AT7.0 (.mm) Diameter ap Material: Polyamide Plunger Position ( ) = onnected Terminals Throw & Schematics Normal Down Normal Down () () P V POLES & IRUITS Straight PLUNGERS (.8) Dia.0 P TERMINALS Vertical with Bracket (0.) Typ.00 (0.) (0.).0 SLIP- APS AT9.9 (7.mm) Diameter ap Material: Polyamide Straight with Bracket olors Available: Black White Red H. (.) Typ. A B B W Note: - - SPDT DPDT Normal Position Latchdown Position Use of a support bracket is recommended to increase PB mounting strength and stability. (.) Dia.0 (.).8. (.8) Dia.0.7 Straight Long Terminal numbers are not actually on the switch. (.8) Dia.0 (8.9).7 () (7.) Dia.9 (.).8. () (0.).00 (.). (0.) Typ.0 (.). (.8) Dia.0.7
5 Series BB Process Sealed Subminiature Antistatic Pushbuttons Straight P BBAP-FA Straight P Bracket TYPIAL SWITH DIMENSIS Straight P Double Pole BBAP BBAP-FA & Alternate Alternate BBAB-FA. (.) Dia.0 (.8).8. (.8) Dia.0. (.) Dia.0. (.0). (8.0). (.8) Dia.0 (.) Dia.0 (.8) Dia.0.7. (.).8.7. (.).8.0 Straight P Bracket Double Pole BBAB. (.) Dia.0 (.0).. (.8) Dia.0.7. (.).8.7. (.).8 (.).8.0 (.). (.). BBAB-FA & Alternate Alternate (.).8.0 (.). (.7).0.0 (.). (0.) Typ.0 (.7) (0.) Typ (.). (.). (0.).00 (.). (0.).00 (.). L (.0).09.. (.0).09 (.) L..0 L (.0) (.) L.0 (.0).09. (.).0 (.) L L. (.).0
6 Process Sealed Subminiature Antistatic Pushbuttons Series BB... (.).. (8.0).. (.) Dia.0 (.8) Dia.0 (.) Dia.0 (.8) Dia.0 (.) Dia.0 (.8) Dia.0 (.) Dia.0 (.8) Dia (.).8. (.7).0 (.).8. (.).8.7. (.).8 TYPIAL SWITH DIMENSIS (.7).0 (0.).0 (0.).0 (.7).0 (.9). (.). (0.).0 (8.9).7 (.7).0 (0.).0 (8.9).7 (.). (.). (.). (.) (.0).09 (.).7 (0.).00 (0.) (.).00. (.0).09 (.).7 (.).7 (0.) (.).00.. (7.).87.0 Right Angle P BBAH-FA Double Pole BBAH Right Angle P. (.).0. & Alternate Alternate BBAH-FA. (.0).09 L.0 Vertical P BBAV-FA Double Pole BBAV Vertical P..0 (.0).09 L.0 & Alternate Alternate BBAV-FA.0 (.) L. (.) 7
Distinctive Characteristics
Distinctive Characteristics Ultra-miniature size allows high density mounting, and extremely light weight of 0. gram makes these switches ideal for handheld equipment. Totally sealed body construction
More informationDistinctive Characteristics
Distinctive Characteristics Subminiature size (/ size of Series M switches) saves space on PC boards. Specifically developed for logic-level applications. Totally sealed body construction prevents contact
More informationProcess Sealed Rotaries
New Product N-0 NR0 Series Process Sealed Rotaries Subminiature Rotaries with Positive, Distinctive Detent 07-07-7 Series NR0 Subminiature Process Sealed Rotaries General Specifications Electrical apacity
More informationGeneral Specifications
Series Process Sealed Subminiature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers General Specifications Electrical Capacity
More informationContents Rockers. A Series... B4 Process Sealed 0.4VA Logic Level Straight, Right Angle, & Vertical PC
Contents Rockers Toggles Rockers Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons A Series... 4 Process Sealed 0.4VA Logic Level Straight,
More informationGeneral Specifications
General Specifications Electrical apacity (Resistive Load) Low/Logic Level: m @ V D Other Ratings ontact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal
More informationDistinctive Characteristics
Distinctive Characteristics Top or side actuation permits flexible board design. Compact dimensions and low profile allow high density mounting and close stacking of PC boards. Crisp actuation positively
More informationGeneral Specifications
Series M Slides Rotaries Programmable Illuminated P Pushbuttons eneral Specifications Electrical Capacity (Resistive Load) Power Level (silver): A @ 5V AC or A @ 50V AC; 4A @ 0V DC (On-On circuit) & A
More informationGeneral Specifications
Series M2 Process Sealed Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks eneral Specifications Electrical
More informationDistinctive Characteristics
Distinctive Characteristics Top or side actuation permits fl exible board design. Compact dimensions and low profile allow high density mounting and close stacking of PC boards. Crisp actuation positively
More informationGeneral Specifications
Half-Inch Diameter Process Sealed Rotaries Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles eneral Specifications Electrical
More informationDistinctive Characteristics
Ultra-Miniature SMT Slides Series SS3 Distinctive Characteristics Compact dimensions and low profile allow high density mounting and close stacking of PC boards. Crisp actuation positively indicates circuit
More informationDistinctive Characteristics
Distinctive Characteristics Low Profile Pushbuttons Series UB Bright, full face, or spot illumination with red, amber, or green single-element LEDs (an integral part of the switch), plus square or rectangular
More informationGeneral Specifications
Series General Specifications Electrical Capacity (Resistive Load) Low/Logic Level: m @ V DC maximum for Standard Operating Force models m @ V DC maximum for igh Operating Force models Other Ratings Standard
More informationGeneral Specifications
Series GT Process Sealed Ultra-Miniature SMT Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers General Specifications Electrical
More informationDistinctive Characteristics
Distinctive Characteristics vailable in flat frame and bracketed PC mounting types. Over-center actuator block and plunger design gives crisp actuation with clear indication of circuit status; this design
More informationGeneral Specifications
Series M00 Tipped Rockers & Paddles Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks General Specifications Electrical
More informationDistinctive Characteristics
istinctive haracteristics Low profile body of MRF model accommodates space limitations required for P mounting. For the MR and MRK bushing mount models, the range of behind panel body depths is. to. (.mm
More information6mm 3VA DC Power Level or 0.4VA Logic Level Straight PC PCB Mount. 6mm SMT 3VA DC Power Level & 0.4VA Logic Level Gull Wing Terminals Upright Mount
Contents Tactiles C Series... mm Process Sealed m Low/Logic Level PC Mount C Series...8 mm SMT Process Sealed m Low/Logic Level Gull Wing Terminals Upright Mount HP Series... mm V DC Power Level or.v Logic
More informationGeneral Specifications
Series Illuminated Low Profile Process Sealed Tactiles Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles General Specifications
More informationGeneral Specifications
Series ND mm Process Sealed SMT DIP otaries eneral Specifications Electrical apacity (esistive Load) Switching ating: ma @ 5V D Nonswitching ating: ma @ 5V D Other atings ontact esistance: Insulation esistance:
More informationGeneral Specifications
Ultra-Miniature Slides General Specifications Electrical Capacity (Resistive Load) ower Level (silver): 0.A @ 0V DC Logic Level (gold): 0.VA maximum @ 8V AC/DC maximum (Applicable Range 0.mA ~ 0.A @ 0mV
More informationGeneral Specifications
Series F Ultra-Thin Process Sealed Tactiles General Specifications Electrical Capacity (Resistive Load) Low/Logic Level: m @ V DC Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength:
More informationDistinctive Characteristics
Low Profile Process Sealed Tactiles Series J Distinctive Characteristics Special bracket for right angle mounting provides added design variations. igher operating force type provides more pronounced operating
More information0.4VA Logic Level Straight, Right Angle & Vertical PC. Extended & Piano Actuated DIP Slides 24V DC Straight PC
Contents Slides AS Series... 0.VA Logic Level Straight, Right Angle & Vertical PC CS Series... 0 A Power Level Straight PC PCB Mount FS Series... igh Frequency 90Mz to Gz Straight PC JS0, JS0 Series...
More informationCK Series...F3 16mm & 19mm High Security 3A Power Level Solder Lug Bushing Mount
Contents Keylocks Toggles A Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers CK Series... 6mm & 9mm High Security A Power Level
More informationGeneral Specifications
Slides Rotaries Programmable Illuminated P Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level: 5A @ 25/250V AC or 5A @ 30V DC Other Ratings Contact Resistance: 0 milliohms
More informationGeneral Specifications
eries J0 & J0 Ultra-Miniature lide & Piano DIP General pecifications Electrical Capacity (Resistive Load) witching Rating: ma @ V DC Nonswitching Rating: 0.A @ 0V DC Other Ratings Contact Resistance: Insulation
More informationDistinctive Characteristics
Distinctive Characteristics Low Profile Pushbuttons Series UB Bright or super bright LEDs (an integral part of the switch) of red, amber, green, blue, or white, in full face or spot illumination plus square
More informationGeneral Specifications
Miniature Rockers Slides Rotaries Programmable Illuminated P Pushbuttons eneral Specifications Electrical Capacity (Resistive Load) Power Level (silver): Logic Level (gold): Logic/Power Level (gold over
More informationGeneral Specifications
Series CW Miniature Power Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks General Specifications CWS CWS CWT
More informationGeneral Specifications
Series M00 Tipped Toggles Toggles Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers General Specifications Electrical Capacity
More informationDistinctive Characteristics
Distinctive Characteristics Full face, bright LED illumination in choice of red, green, and amber for visible status indication. 9-amp or 6-amp electrical capacity in compact body. Interior shield prevents
More informationGeneral Specifications
Series M00 Tipped Toggles Toggles Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers General Specifications Electrical Capacity
More informationGeneral Specifications
Series CW Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks General Specifications CWS CWS Electrical Capacity Power Level:
More informationDistinctive Characteristics
Distinctive Characteristics Industry s first molded rocker with TV rating. Designed to handle large inrush current. JWM models certified for TV-5 rating and JWL models for TV-8 rating. Special 5A @ 7V
More informationDistinctive Characteristics
Tilt Switch Series DS Distinctive Characteristics DSA Environmentally friendly, contains no mercury. High contact reliability due to sealed body. The switch is triggered when tilted beyond ±10 of the horizontal.
More informationGeneral Specifications
Series NP01 Subminiature Smooth ctuation Pushbuttons General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.4V maximum @ 28V C/C maximum (pplicable Range 0.1m ~ 0.1 @ 20mV ~ 28V) Other
More informationStandard Size Rotaries Series HS TS PS
Standard Size Rotaries Series HS TS PS GENERAL SPECIFICATIONS Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical
More informationTYPICAL SWITCH ORDERING EXAMPLE BARRIER TYPES. R No Barrier B With Barrier CAP COLORS. A Black B Ivory. Red. H Gray INSCRIPTION ORIENTATION
TYPICAL SWITC ORDERING EXAMPLE JW L R C A M L RATINGS TV5 Rated 0A @ 5/50V AC TV8 Rated 6A @ 5/50V AC ARRIER TYPES R No arrier With arrier OUSING COLORS A lack POLES SPST SPDT * DPST DPDT * DPST must have
More informationStandard Size Rotaries Series HS TS PS
Standard Size Rotaries Series HS TS PS GENERAL SPECIFICATIONS Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical
More informationGeneral Specifications
Series SK General Specifications Electrical Capacity (Resistive Load) Power Level (silver): A @ 5V AC for low & medium security; A @ 50V AC for low security Other Ratings Contact Resistance: Insulation
More informationStandard Size Rotaries Series HS TS PS
Standard Size Rotaries Series HS TS PS GENERAL SPECIFICATIONS Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical
More informationSwitches Unlimited Contact: Fax: GENERAL SPECIFICATIONS
Series HS TS PS 00--0 Fax: --0 Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Indexing: Contact Timing:
More informationGeneral Specifications
Series NP01 Subminiature Smooth ctuation Pushbuttons General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.4V maximum @ 28V C/C maximum (pplicable Range 0.1m ~ 0.1 @ 20mV ~ 28V) Other
More informationRockers Contents M S eries... Snap-in Mount A Power Level & 0.VA Logic Level Solder Lug, Quick Connect, Straight PC, & Wirewrap M S eries... 7 rackete
Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons 日本 NKK 官网的英文船型开关说明书 Contents Rockers A S eries... Process Sealed 0.VA Logic Level Straight, Right Angle, & Vertical PC
More informationGENERAL SPECIFICATIONS FOR S1 ~ S29
Medium Capacity Standard Size GENERL SPECIFICTIONS FOR S ~ S9 (Resistive & Inductive Load) Power Level: Shown in the following tables 800--087 Fax: 78-7-70 Other Ratings Contact Resistance: Insulation
More informationGeneral Specifications
Series M Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks eneral Specifications Electrical Capacity
More informationCAS SLIDE SWITCHES (SMD) FEATURES PART NUMBER DESIGNATION C A S T B 1. Please refer to the LIST OF PART NUMBERS when placing orders.
SLIDE SWITHES (SMD) AS RoHS compliant INTERNAL STRUTURE Part name Material Flammability FEATURES over Polyphenylenesulphide Slider Housing Slider contact Polyamide Polyphenylenesulphide UL94V- Fixed contact
More informationAZ420 MINIATURE GENERAL PURPOSE RELAY
MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 100 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available
More informationMedium Capacity Standard Size Toggles Series S
GENERAL SPECIFICATIONS FOR S ~ S9 (Resistive & Inductive Load) Power Level: Shown in the following tables Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life:
More information日本轻触开关 jf- 带灯轻触开关 - 轻触开关规格贴片轻触开关英文说明书 pdf 防水轻触开关 x 无声轻触开关 x 带灯轻触开 Tactiles Contents S eries... mm Process Sealed m or m Low/Logic Level Straight or Ri
Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 日本轻触开关 jf- 带灯轻触开关 - 轻触开关规格贴片轻触开关英文说明书 pdf 防水轻触开关 x 无声轻触开关 x 带灯轻触开 Contents
More informationDevices raised mounting
Devices raised mounting Illuminated pushbutton actuator Illuminated pushbutton actuator Front protection Switching system Contacts Diode (1N 47) Switching action Terminals b 18 x 18 mm Typ-Nr. a 18 x 24
More informationAPE A PE 2 F 2 M 10 Z. Subminiature Pushbutton Switches. Features. /Part Numbering. Page 253. Optional Accessories
Subminiature Pushbutton Switches RoHS RoHS Compliant 1. 2. 3. 4. 2.54mm 5. UL UL UL 0.4VA ACDC AC/DC60V 50mA AC/DC20mV 1A ULAC/DC48V 50mA 50m AC200V 1.5mA AC250V 1 500M DC500V 10,0000.4VA30,000 0.782.94N
More informationSERIES FEATURE MAX RATING MECHANICAL LIFE APPROVALS CIRCUITRY. B1 Ultra Small 2A 100,000 N/A SPST, SPDT
SWITCH SELECTION GUIDE Basic Switches SERIES FEATURE MAX RATING MECHANICAL LIFE APPROVALS CIRCUITRY (Resistive) B1 Ultra Small 2A 100,000 N/A SPST, SPDT B1-5 Levers 2A 1,000,000 N/A SPST, SPDT B2 Subminiature
More informationPUSH BUTTON SWITCHES(Momentary)
PUSH BUTTON SWITCHES(Momentary) Series - 7 DESCRIPTION Integral Series7 Push Button Switches is a unique design wherein the operative portion is separate from the Switch Element.The Basic Switch Series
More informationGeneral Specifications
Miniature Rockers Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators eneral Specifications lectrical Capacity (Resistive Load) Power Level (silver): Logic Level (gold):
More information8 Series Pushbutton Switches
8 Series Pushbutton Switches Features. Contacts Silver or gold-plated contacts.. Epoxy resin case UL94V-0 self-extinguishing epoxy. 3. Actuator style Over 30 actuator variations. 4. Insulation between
More informationSERIES 16, 26 & 18 MICROSWITCH
SERIES 16, 26 & 18 MICROSWITCH SERIES 16 & 26 FEATURES Form Z contacts to cover all switching requirements Snap action for positive switching Solder terminals for superior electrical contact Choice of
More informationXC5. DIN-style Twin-contact Connectors. Expanding the DIN Concept. Materials and Finish. Ratings and Characteristics
DIN-style Twin-contact Connectors Expanding the DIN Concept Mates with DIN connectors. Ideal for automated soldering because the Connectors sit on top of the board. Mounting dimensions of the DIN Style-1
More informationDevices raised mounting
Devices raised mounting Illuminated actuator pushbutton Front protection Switching system Ø 29 mm Contacts Typ-Nr. e Illuminated actuator pushbutton IP 67 LL 1 NC - MA UT 14-476.36 1 4 17 12.15 M UT 14-436.36
More informationSERIES SUBMINIATURE SNAP-ACTION SWITCHES
PRODUCT FEATURES Small, effi cient snap-action switch up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator Large selection
More informationConstruction. Mechanical data Number of Contacts 6, 8 or 16. Electrical data Insulation resistance Contact resistance max. Switch contact resistance
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 45 CCM04 MKII The CCM04 without card guidance is used where space is at a premium and the card guidance can be built around the connector (rather than provided
More informationseries Subminiature snap-action switches
Rocker switches Product features Small, efficient snap-action switches up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator
More informationPUSHWHEEL SWITCHES SEE PUSHWHEEL SWITCH SELECTION GUIDE ON NEXT PAGE
PUSHWHEEL SWITCHES SEE PUSHWHEEL SWITCH SELECTION GUIDE ON NEXT PAGE 1 PUSHWHEEL SWITCHES PUSHWHEEL SWITCH SELECTION GUIDE: This section contains an extensive variety of pushwheel switches with numerous
More informationHIGH CAPACITY, LONG LIFE SUBMINIATURE SWITCH
HIGH APAITY, LONG LIFE SUBMINIATURE SWITH AVM3 P (PS) SWITHES FEATURES 10.1 Amp. high contact capacity is available Long life Precise operating (5: Pin plunger type) Flux-resistant construction with integrally
More informationMULTI ROTARY SWITCH MR50
MAIN FEATURES 1 / 2 " SELECTOR SWITCH Dimensions Ø ½ (12.7 mm) Switching mode: Shorting or non-shorting 10, 12 and 16 selector switch positions Switching torque up to 6 Ncm Gold plated contacts Rugged
More informationQuick-connect terminals (#110)
Sealed Subminiature Basic Switch D2SW-P Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealed to IEC IP67. Switch rating of 2 at 250 VC possible with a single-leaf
More informationV-Series. Contura Rotary Switch
V-Series Contura Rotary Switch The V-Series Contura Rotary Switch was designed for maximum performance and reliability leveraging the features of the widely popular V-series Contura Rocker Switches. Available
More informationPRODUCT SPECIFICATION CUSTOM CONFIGURABLE MODULAR POWER DOCK CONNECTOR SYSTEM
1.0 SCOPE This Product Specification covers the custom configurable modular printed circuit board (PCB) Dock Connector System with gold plating. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER(S)
More information16 g SS-01GL-FD SS-01GL-F SS-01GL-FT 50 g SS-01GLD SS-01GLD1 SS-01GLD2 SS-01GL SS-01GLT Simulated roller lever
Snap Action Switch SS Subminiature Snap Action Switch Economical, subminiature snap action switch offers long service life (30 million operations minimum) All models are free from overtravel restrictions,
More informationHMI Components. Series. Pushbutton Illuminated pushbutton. Audio and video mm mm mm
Edition 12/2014 HMI Components 95 Series Characteristics The Series 95 PCB pushbuttons can be used in combination with 1.5 to 2.5 mm PCBs. The buttons are selfattaching until they are soldered. Depending
More informationSERIES TL 3200 SWITCHES
TACT 3200 TACT SMT, LED - 4.5mm x 6.8mm 30,000 cycles 500mΩ 100MΩ min. 160 +75/-30 grams Operating Temperature: -25 C to 85 C 0.25mm +0.2/-0.1mm Dual LED, SMT Design Ultra miniature design (only 4.5mm
More informationL Series Miniature Slide Switches
Features/Benefits Positive detent Enclosed housing Maintained and momentary functions PC and panel mounting RoHS compliant Typical Applications Communications equipment Lighting devices Models Available
More informationSPECIFICATION FOR APPROVAL
PART NO.: XMG-9771-AE51131-246 Xmultiple MARKETING GROUP R&D GROUP QA GROUP ISSUED BY CHECKED BY QA INSPECTION Gino De Xu Long CUSTOMER: SAMPLE Q TY: CUSTOMER CUSTOMER APPROVAL: APPROVAL CONCESSIONARY
More informationRTE02 and RTE03 Miniature Rotary Switches
RTE02 and RTE03 Miniature Rotary Switches RTE02 and RTE03 are two types of a subminiature rotary changeover switch to be mounted on PC boards. PC pins are in a 2.54 mm (0.100) grid. RTE02 with 2 positions
More informationA16. Separate Construction with Cylindrical 16-dia. Body. Pushbutton Switch (Detachable) (Lighted/Non-Lighted) (Cylindrical 16-dia.
Pushbutton Switch (Detachable) (Lighted/Non-Lighted) (Cylindrical 16-dia.) Separate Construction with Cylindrical 16-dia. Body Miniature design of 28.5 mm, the smallest class in the industry. Detachable
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Power Connectors FEATURES AND SPECIFICATIONS Features and Benefits Positive
More informationCommercial MATE-N-LOK Connectors
MP Commercial MTE-N-LOK Connectors Product Facts Fully polarized nylon housings Easy cavity identification Locking devices are integral part of design. Connector halves will hold together under severe
More informationAM5 (QV) SWITCHES. Automation Controls Catalog
Automation ontrols atalog To Be Discontinued: Last time buy:march, 05 MINIATURE SWITHES WITH HIGH PREISION AM5 (QV) SWITHES 5.9 0. 7.8 FEATURES High precision as a result of designing ideal spring by using
More informationSealed snap-action pushbutton switches bushing Ø 12 mm momentary
SW-IM-709 DISTINCTIVE FEATURES Snap-action : tactile feedback with audible click High current/voltage rating Sealed to IP67 Flat round actuator for optional marking NO+NC ENVIRONMENTAL SPECIFICATIONS Front
More informationRA SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS Compliant FEATURES ORDERING INFORMATION SAFETY STANDARD AND FILE NUMBERS
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RA SERIES RoHS Compliant FEATURES Ultra high sensitivity High reliability-bifurcated contacts Conforms to FCC rules and regulations Part 68 Dielectric
More informationSS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept
Subminiature Basic Switch SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept One-piece terminal construction to keep out flux. A single leaf movable spring construction.
More informationHIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE
HIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE NV (AH7) SWITCHES FEATURES Extra long-life spring mechanism More than 10 7 mechanical operations, 10 electrical High contact rating of 1 Amps with an
More informationCFS SLIDE SWITCHES (FULL PITCH) C F S T B FEATURES APPLICATIONS PART NUMBER DESIGNATION COPAL ELECTRONICS. RoHS compliant INTERNAL STRUCTURE
RoHS compliant INTERNA STRUTURE FEATURES RoHS compliant Excellent contact stability by twin Gold-plated contact Part name over Slider Housing Material Polyphenylenesulphide Polyamide Polyphenylenesulphide
More informationD2VW. Sealed Miniature Basic Switch. Ordering Information Model Number Legend D2VW- -
Sealed Miniature Basic Switch Sealed Miniature Basic Switch Conforms to IP67 (Molded Lead Wire Type Only) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water
More informationSwitches and Indicators 84
Switches and Indicators 84 84 Switches and Indicators Index Series 84 Description Page 177 Product Assembly Page 178 Mounting Instruction Page 179 Product Range - pushbuttons for flush mounting - accessories
More informationSeries Single and double-pole rocker switches
H Series 1800 - Single and double-pole rocker switches Rocker switches Product features 100 million times proven switching principle High, flexible design variety Excellent actuating characteristic Illuminated
More informationMJTP SERIES 6MM & 4MM SMD TACT SWITCHES
JTP SERIES 6 & 4 SD TACT SWITCHES FEATURES Numerous single pole-single throw momentary configurations. Excellent tactile feed-back (Snap dome). Ultra-compact size. Long operating life for high reliability.
More informationContact form. Operating Force. Plunger SPDT 204g Dust- Proof (in closed position) Plunger SPST-NC 204g Dust- Proof (in closed position)
D3D Miniature Door Switch Appliance industry standard plunger and lever actuator styles High contact reliability ensured using gold alloy crossbar contacts Drip/spill sealing in free position (plunger
More informationFeatures Sealed Construction for Automatic Soldering. Contact form. Operating Force SPST- NO SPST- NO SPST- NO SPST- NO SPST- NO SPST- NO SPST- NO
B3W Features Sealed Construction for Automatic Soldering Available in two sizes: 6x6mm (1) and 12x12mm square (4) Ideal for applications such as audio, office and communications equipment, measuring instruments,
More informationDUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
More informationQUICKIE SHROUDED HEADERS LOW PROFILE
BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle
More informationRelays & Sockets. RQ Series. RQ Series PCB Relays Part Number Selection
Q Series Q Series PB elays Switches & Pilot Lights Display Lights IDE Q relays are low-profile, PB relays that provide quality within a compact package. Size equals value. Q relays are small, yet maintain
More information2 POLES 1 to 2 A (FOR SIGNAL SWITCHING)
FUJITSU TAKAMISAWA COMPONENT CATALOG MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FEATURES Ultra high sensitivity High reliability-bifurcated contacts Conforms to FCC rules and regulations Part
More informationSUBMINIATURE MICROSWITCHES - SEALED
SWITCHES.COUZET.COM MICOSWITCHES SUBMINIATUE MICOSWITCHES - SEALED VS - 88 Coil spring snap-action mechanism Wire lead or cable outputs, various terminal types with symmetric or asymmetric pinning Excellent
More informationCover. Slider C F S T B
RoHS compliant INTERNA STRUTURE FEATURES RoHS compliant Excellent contact stability by twin Gold-plated contact APPIATIONS Part name over Slider Housing Slider contact Fixed contact Terminal pin Material
More informationPOWER ROCKER SWITCH. Standard actuator type Wide actuator type UL/C-UL, ENEC/VDE UL/C-UL, ENEC/VDE
POWER ROCKER SWITCH SWITCHES AJ8 switch Standard actuator AJ8 switch Wide actuator FEATURES 1. Power rocker switches for safety requirements. All versions comply with ClassII EN61058-1 insulation grade.
More informationTerminals Solder terminals Quick-connect. PCB terminals terminals (#110) 3 A Pin plunger SS-3GP SS-3GPT SS-3GPD SS-3GPB
Subminiature Basic Switch SS-P SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept Insert molded base and improved case-to-base seal provides enhanced resistance to
More informationJV SERIES 1 POLE 5 A (MEDIUM LOAD CONTROL) POWER RELAY. RoHS compliant
POWER RELAY 1 POLE 5 A (MEDIUM LOAD CONTROL) JV SERIES RoHS compliant FEATURES UL, CSA, VDE, SEMKO, CQC recognized UL class B (130 C) insulation Low profile and space saving Height: 12.5 mm Mounting space:
More information