T e s t c e r t i f i c a t e

Transcription

1 T e s t c e r t i f i c a t e Page 1 of 4 Issued by NMi Certin B.V. Hugo de Grootplein EG Dordrecht The Netherlands Notified Body Number 0122 In accordance with Applicant In respect of Characteristics Description and documentation Paragraph 8.1 of the European Standard on Metrological aspects of non-automatic weighing instruments EN 45501:1992/AC: 1993 and the Welmec guide for testing point of sale devices (Welmec 2.2, June 1997). Devlyx Les Bois Eyriac LUSSAS FRANCE The model of a point of sale device, tested as a part of a weighing instrument Manufacturer : Devlyx Type : LX5500, LX6000, LX7500, CM5700, CTSArissa or CTS6000 In the description TC6404 revision 2 further essential characteristics are described. The point of sale is described in the description number TC6404 revision 2 and documented in the documentation folder number TC6404-2, appertaining to this test certificate. Remarks Summary of the test involved: see appendix number TC6404 revision 2. This revision replaces the earlier version, including its documentation folder. Delft, 29 September 2006 NMi Certin B.V. Ing. C. Oosterman Manager Product Certification Nederlands Meetinstituut Hugo de Grootplein EG Dordrecht Telephone Telefax NMi B.V. (Chamber of Commerce no ) Subsidiary companies: NMi Van Swinden Laboratorium B.V. ( ) NMi Certin B.V. ( ) Verispect B.V. ( ) This document is issued under the provision that NMi. B.V. nor its subsidiary companies accept any liability. Reproduction of the complete document is allowed. Parts of the document may only be reproduced after written permission

2 D e s c r i p t i o n Page 2 of 4 1 General information about the point of sale device All properties of the point of sale device, whether mentioned or not, may not be in conflict with the standard mentioned in the test certificate. 1.1 Essential characteristics Software: Manufacturer Type Test certificate number Remarks Devlyx Spbwin TC6403 Devlyx MPS TC Conditional parts Mainboard: Manufacturer Type Applied in system Remarks Flytech B-63 LX6000 / LX7500 Asus P4SGL-VM CM5700 Partner Tech Cop PT-5500 LX5500 Asus P4R8L CTS6000 Firich Co Ltd PEB-4720 CTSArissa Power supply: Manufacturer Type Applied in system Sepcification Flytech FT-8075 LX6000 / LX7500 Output: 5 V / 8.5 A 12 V / 2.4 A -12 V / 0.3 A Achme China AM630BS20S LX6000 / LX7500 Output: 12 V / 10 A 5 V SB / 1.5 A -5 V / 0.3 A -12 V / 0.5 A 5 V / 20 A 3.3 V / 10 A

3 D e s c r i p t i o n Page 3 of 4 Manufacturer Type Applied in system Sepcification CB PFC CM5700 Output: 3.3 V / 22 A 5 V / 32 A -5 V / 0.3 A 12 V / 16 A -12 V / 0.8 A 5 V SB / 2 A WEARNESS Global CO.LTD WDS LX5500 Output: 12 V / 6.7 A Delta Electronics DPS-200PB-138C CTS6000 Output: 12 V / 10 A 5 V SB / 2 A -12 V / 0.8 A 5 V / 20 A 3.3 V / 14 A FEC ENP-5825 CTSArissa Output: 12 V / 2 A 5 V SB / 2 A 5 V / 10 A 24 V / 2 A Communication board: Manufacturer Type Specification Remarks NetMos 9835 PCI 2 x RS232 Rayon P584 4 x RS232 The point of sale device may be equipped with the following protective interfaces that have not to be secured: - RS232; - Parallel port; - VGA; - USB; - Ethernet; - PS2 mouse and keyboard. The point of sale device may be equipped with peripheral equipment, if the peripheral equipment is certified to be connected to an EC type-approved weighing instrument by a Notified Body appointed to certify instruments according to paragraph 1 of Annex II of the EC-directive on Non-Automatic Weighing Instruments. 1.3 Conditionals characteristics Connection:

4 D e s c r i p t i o n Page 4 of 4 - Power supply: 115V V Hz. - The EPoS can be used in an Master-Slave configuration, for the exchange of PLU and management information Conditional shapes See drawings: - Overview, drawing number 1.1; - Overview, drawing number 2.1; - Overview, drawing number 3.1; - Overview, drawing number 4.1; - Overview, drawing number 5.1; - Overview, drawing number 6.1. The data plate is secured against removal or will be destroyed when removed and contains at least the following information: - name or mark of the manufacturer; - type designation; - this test certificate number TC Non-essential parts The point of sale device may be connected to non-essential devices, for example but not limited to bar code readers, foot switches, second display s and cash drawers, provided that; - They do not present primary data used for purpose mentioned in article 1(2)(a) of the EC-Directive (90/384/EEC) unless they satisfy the "Preliminary observation in Annex 1 of this Directive - They do not lead to an instrument having other conditional characteristics than those fixed by this test certificate document. Other non-essential parts: - vendor display; - customer display; - keyboard; - mouse; - harddisk; - floppy drive; - CD-ROM.

5 A p p e n d i x Page 5 of 4 Tests carried out for this test certificate on the point of sale device, type LX6000 and CM5700: Test Type or version Institute Voltage variations LX6000 and CM5700 NMi Certin B.V Short time power reductions LX6000 and CM5700 NMi Certin B.V Electrical burst LX6000 and CM5700 NMi Certin B.V Electrostatic discharges LX6000 and CM5700 NMi Certin B.V Immunity to radiated electromagnetic fields LX6000 and CM5700 NMi Certin B.V Relevant parts of the checklist - -

6 D o c u m e n t a t i o n f o l d e r Number TC Page 1 of 1 Description Drawing number Rev. Remarks Overview LX5500 Overview CM5700 Overview LX7500 Overview LX6000 Overview CTS6000 Overview CTSARISSA