See the difference. VUE with confidence.

Transcription

1 See the difference. VUE with confidence. The VAPR VUE system with COOLPULSE technology Next generation radiofrequency system for clear and sustained visibility, enhanced procedural efficiency and exceptional flexibility See success more clearly.

2 Designed for efficiency VAPR VUE wireless footswitch provides unrestricted foot pedal access and operation Features interference-resistant technology, for exceptional reliability and performance 50-foot range of operation Long-lasting battery life * Quick and simple one-time set-up Once set up, the wireless footswitch is automatically recognized by the same generator and selected as the mode of control Proprietary COOLPULSE radiofrequency technology ablates tissue more quickly, without generating more heat Unique power pulses enable a faster and more efficient creation of the vapor pocket (plasma) than standard bipolar radiofrequency electrodes * Typical battery life of one year, based on average use. As compared to ArthroCare Super TurboVac during in vitro testing. Data on file. Arthrocare and Super TurboVac are trademarks and/or registered trademarks of Arthrocare Corporation.

3 Flexible to your needs Wide range of ablation controls and display settings Choice of activation controls: hand controls, wireless footswitch or wired footswitch Flexibility to refine probe performance based on anatomical considerations: Wide range of power settings for ablation (10 to 400 W) and coagulation (10 to 200 W)* Choice of three standard Ablation modes (V1 V3), CP (COOLPULSE) Ablation mode, and two Blended Ablation modes Easy and quick adjustment of ablation settings via generator, hand controls or footswitch Easy to switch activation mode from hand controls to wired or wireless footswitch Output power can be displayed in either watts or relative number from 1 to 10 Choose from our broad range of electrode designs Supports use of new COOLPULSE electrodes and new hand control versions of existing electrode designs Compatible with our broad portfolio of existing VAPR electrodes * Range varies depending on specific electrode type in use. Only available when using ADVANCED User Mode.

4 The VAPR VUE system WITH COOLPULSE TECHNOLOGY : Quick Reference Guide Switching between ADVANCED and BASIC User Mode Choice between ADVANCED (output power displayed in Watts) or BASIC mode (output displayed as relative number from 1 to 10) Steps: Press MODE button on generator twice Display: Select User Mode Use blue UP/DOWN buttons to select the desired mode Press MODE button to confirm Note: Generator will remain in last selected mode unless mode is changed by user MODE Button Press 2X Display Select User Mode Blue Buttons Select Up/Down

5 Adjusting ABLATE power via wired/wireless footswitch or hand controls Depress black mode pedal/button for 2 seconds ABLATE power figure on generator display will blink Press yellow pedal/button to increase power level Press blue pedal/button to decrease power level Press mode pedal to confirm and exit to ready status Note: Coagulation power can be adjusted only using the generator interface (blue UP/DOWN arrows) MODE Button Press & Hold 2 Seconds Yellow Button Power Up Blue Button Power Down

6 The VAPR VUE system WITH COOLPULSE TECHNOLOGY : Quick Reference Guide Wireless Pairing Process Press and hold the Wireless Footswitch Select/Pair button for 2 seconds Display will read Hold Footswitch Face Up Hold footswitch in a horizontal position with pedals facing upward in close proximity (2 feet or less) in front of the generator Progress bar on the bottom of the display will fill up As the progress bar gets close to filling the bottom line of the display, prepare to turn the footswitch upside down Display will read: Hold Footswitch Face Down Promptly turn and then hold footswitch in a horizontal position with pedals facing downward in close proximity (2 feet or less) in front of the generator Progress bar on the bottom of the display will fill up Successful pairing is confirmed by audible beep and by display message Pass Footswitch is now ready to use Note: Once a Footswitch is paired to a generator it will remain paired to this specific generator, even when generator is switched off and on or after the footswitch batteries are changed

7 Troubleshooting Error & Fault Symbol Interpretation and Recovery Most technical problems are indicated by either an Error or a Fault symbol that appears in the Generator display window. The VAPR VUE system constantly performs self-checking to ensure its correct operation. Fault codes are reported to the user based on time and weighting of those self checks. An Error symbol indicates an accessory malfunction or a Generator component failure that requires servicing of the equipment. These symbols include a code number to be used by DePuy Mitek technical service to diagnose why the system failed. A Fault symbol indicates a transient non-hazardous event and can be corrected by resetting the system. Recovery Resetting Generator Faults and Errors WARNING: An Error symbol indicates an equipment malfunction, which may be hazardous. Disconnect all accessories and switch the Generator off. Switch the Generator back on and if the self-test is completed satisfactorily as evidenced by the ATTACH INSTRUMENT message on the display, the failure occurred in the accessories, which should be discarded and replaced. If the self-test fails, then all functions will be inhibited and no attempt should be made to use the Generator. Contact DePuy Mitek customer service for assistance. NOTE: Remember to take note of the fault/error code for reporting to customer service before completing the reset. Corrective Action: Reset the generator by either: PRESSING AND RELEASING the MODE button once. or DISCONNECTING THE INSTRUMENT AND switching the generator off and restarting. If this does not resolve the problem, contact DePuy Mitek customer service at

8 Focus on success The VAPR VUE system WITH COOLPULSE TECHNOLOGY The next generation of ablation technology is here Proprietary radiofrequency technology quickly ablates tissue, without generating more heat* Delivers a clear and sustained field of vision to optimize surgical efficiency Choice of ablation controls: hand controls, wireless footswitch of wired footswitch Broad range of electrodes to choose from Order Number VAPR System and Accessories VAPR VUE Generator VAPR VUE Wireless Footswitch VAPR Wired Footswitch VAPR Power Cord Schedule an appointment with your representative today. Call or visit DePuy Mitek, Inc. 325 Paramount Drive Raynham, MA USA Tel: +1 (800) DePuy Mitek, Inc All rights reserved /11 ADDB/LP * As compared to ArthroCare Super TurboVac during in vitro testing. Data on file. Arthrocare and Super TurboVac are trademarks and/or registered trademarks of Arthrocare Corporation.