Section 10 Mk5 and Mk7 Printhead Offset Code Availability

Transcription

1 Mk5 and Mk7 Printhead Offset Code Availability Offset codes available to recalibrate printheads for the Linx inks shown below, if necessary. XXXXXXXXXXXX XXXXXXXInkXXX XXXXXXXXXPrint head Mk7 Ultima Mk7 Midi Mk7 Ultima plus Mk7 Midi plus Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Mk7 Mini Y Y Y Mk7 Micro Y Y Y Mk5 Midi Mk5 Midi 70 µm Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ### Y Y Y Y Y Y ### Printhead can be calibrated to this ink type with no restriction on character heights. Printhead can be calibrated to this ink type but can only be used for up to lines of print (5 high characters for Mk7 or 4 high characters for Mk5). Printhead can be calibrated to this ink type but can only be used for up to lines of print (18 high characters for Mk7 or 16 high characters for Mk5). Available for 600 printers only. For more information please refer to the Ink Selling Guide. Wit the exception of the Mk7 Mini Printhead, Printheads are supplied calibrated to Linx Ink 10. A table of 'Offset Codes' is supplied with each printhead so that it can be recalibrated to any of the allowable ink types shown above. For details of the recalibration procedure refer to the Service/Maintenance Manual appropriate to the printer. 14

2 Mk5 Midi Printheads Midi R/A Printhead 1 Midi Printhead 1

3 Mk5 Midi Printheads Item Part Number Description Pack Quantity Availability Terms Distributor Price UK Price Comments FA019 PRINTHEAD ASSY MIDI MK5 M FA01 PRINTHEAD ASSY MIDI MK5 M R/A 1 4 weeks FA00 PRINTHEAD ASSY MIDI MK5 4M FA0 PRINTHEAD ASSY MIDI MK5 4M R/A 1 4 weeks The Mk5 Midi Printheads are supplied calibrated to Linx ink 10, to Linx ink 6100 for 'FDA-type' Food Grade A table giving the offset codes is supplied with each printhead. If necessary, this can be used to recalibrate for the Linx inks shown at the beginning of this section. The Food Grade Mk5 Midi Printheads are supplied calibrated to Linx ink 6100 (4 high only) or to Linx ink The offset code for Linx ink 610 (4 high only) is supplied with each printhead calibrated to Linx ink Printheads calibrated for 'Food Grade Inks' add 40 premium to the prices shown. FA4019 PRINTHEAD ASSY 70 MICRON MK5 M FA401 PRINTHEAD ASSY 70 MICRON MK5 M R/A 1 4 weeks FA400 PRINTHEAD ASSY 70 MICRON MK5 4M 1 4 weeks FA40 PRINTHEAD ASSY 70 MICRON MK5 4M R/A 1 4 weeks The Mk5 70 Micron Printheads are supplied calibrated to Linx ink 10. The Mk5 70 Micron Printheads are supplied fitted with 50 Micron Printhead Connector (White) FA054. A table giving the offset codes is supplied with each printhead. If necessary, this can be used to recalibrate for the Linx inks shown at the beginning of this section. If other Ink/Printhead combinations are required please enquire of Linx Sales department. Mk5 printheads should be ordered by ink type, e.g. FA019/10, FA01/6100 or FA00/60. 1 FA7040 PRINTHEAD COVER TUBE ASSY 1 4 weeks FA709 P/H COVER TUBE ASSY MILD STEEL 1 4 weeks FA710 CUT-AWAY COVER TUBE ASSY FA7181 PRINTHEAD THUMB SCREW PACK 5 Ex-stock Recommended for use in applications using a magnetic conveyor in order to shield the printhead Hall effect switch. Not fitted as standard. For use with Mk5 Midi printhead only.

4 Mk5 Midi Printheads Assembly

5 Mk5 Midi Printheads Assembly Item Part Number Description Pack Quantity Availability Terms Comments 1 FA74070/10 CALIBRATED NOZZLE ASSEMBLY 6 MICRON (NON- FOOD GRADE INK) 1 FA74070/6100 CALIBRATED NOZZLE ASSEMBLY 6 MICRON (FDA TYPE FOOD GRADE INK) 1 FA74070/60 CALIBRATED NOZZLE ASSEMBLY 6 MICRON (EU TYPE FOOD GRADE INK) 1 FA7419/10 CALIBRATED NOZZLE ASSEMBLY 70 MICRON (NON- FOOD GRADE INK) FA6801 CALIBRATED NOZZLE ASSY CASE Replacement Nozzle Assembly for Mk5 Midi, Mk7 Ultima and Mk7 Midi printheads calibrated to Linx ink 10. An offset code is supplied with each nozzle to recalibrate to the Linx inks approved for the printhead type. Replacement Nozzle Assembly for Mk5 Midi printhead calibrated to Linx Ink 6100 (4 High only). The offset code for Linx Ink 610 (4 High only) is supplied with each nozzle. Mk5 Midi Nozzle Assembly calibrated to Linx Ink 60 (4 High only). Replacement Mk5 70 µm Midi hybrid nozzle assembly calibrated to Linx ink 10. An offset code is supplied with each nozzle to recalibrate to each of the following Linx inks: 1009, 105, 109, 1059 (600 only) and 140. FA001 PRINTHEAD CALIBRATION LABEL PACK 5 Ex-stock 1 FA7195 GUN COVER MIDI RFP MOULDED FA705 NUT FULL HEX M SS PACK 100 Ex-stock FA7051 SCREW M X 6 PAN POZ SS PACK 100 Ex-stock FA705 WASHER SHAKEPROOF M SS PACK 100 Ex-stock FA7116 NOZZLE ALIGNMENT TOOL Gun cover nut. Nozzle screw. Washer for nozzle and gun cover. Suitable for all printheads except Mk1. FA0011 NOZZLE O RING PACK 10 Ex-stock FA74046 NOZZLE CLEANING SERVICE ACCESSORY FA700 COVER TUBE MAGNET ASSY FA7419 PRINTHEAD SPLASH COVER PACK 0 Ex-stock 4 FA0006 BLIND GROMMET PACK 10 Ex-stock 5 FA59900 CONN D-TYPE SHELL 15-WAY BLACK Suitable for all printheads manufactured from August 199. Refer to the maintenance instruction in the Maintenance/Service Manual for the Nozzle Cleaning Procedure. For MkB and Mk5 printheads only. To protect printheads against water ingress during washdown; not to be fitted Must be fitted around printhead fluid pipes and around electrical wiring on TÜV 6000 and CE approved 400. Suitable for soldered and crimped connectors. FA94004 D` CONN FITTING TOOL 6 FA0007 HEATSHRINK BOOT (MINI COAX) PACK Ex-stock 7 FA7408 MINI COAX CONN PACK 5 Ex-stock Use for the new type crimped connector on 400 and 6000 ink system cableforms (refer to Service Bulletin SB044), and new printheads (refer to Service Bulletin SB097). To fit mini coax plugs. Part of cableform AS10. 8 FA0008 INSULATED RECEPTACLE RED PACK 0 Ex-stock 4

6 Mk5 Midi Printheads Assembly (continued)

7 Mk5 Midi Printheads Assembly (continued) Item Part Number Description Pack Quantity Availability Terms Comments 9 FA0110 -WAY FLUID CONNECTOR 15 MICRON 9 FA054 -WAY FLUID CONNECTOR 5 MICRON 10 FA7415 M x 8 CSK POZ SS SCREW PACK 10 Ex-stock 11 FA7416 GASKET: FLUID CONNECTOR -WAY PACK 10 Ex-stock 1 FA7416 -WAY CONNECTOR REPLACEMENT FILTER 15/5 MICRON All black fluid connector used on Ultima and Midi printheads. To provide easier and faster mistake-proof printhead connection. Fluid connector used on Mk7 Midi plus printheads and Mk5 70 µm Midi printheads. All white body with white plastic filter. For use with FA0110 and FA054 connectors. For use with FA0110 and FA054 connectors. Black plastic filter. For use with FA0110 connector. Includes insert/extract tool and gasket. 1 FA WAY CONNECTOR REPLACEMENT FILTER 5/50 MICRON 1 FA6900 IN-LINE GUTTER CHECK VALVE FA0001 HIGH FLOW GUTTER RESTRICTOR ASSY FA94009 SOLVENT RESISTANT CLEANING BRUSH FA71071 CABLEFORM MK4 70 MICRON RED White plastic filter. For use with FA054 connector. Includes insert/extract tool and gasket. To prevent ink siphoning when printhead is mounted below printer level. For use on all Mk7 printheads and Mk5 Midi printheads with Linx inks 140 and 1070 only. Increases gutter flow for inverted printhead applications. Suitable for use on Midi printheads only. For use with white pigmented ink printers. Fit between printhead D-connector and Amplifier PCB (refer to Service Bulletin SB047). 14 FA7107 CABLEFORM MK5 70 MICRON YELLOW The following items are only applicable to old build printheads fitted with three 1/8 union fittings. FA65006 TOOLS 1/8 UNION FITTING Various Ex-stock FA65007 BLANKING SET 1/8 UNION FITTING each Ex-stock FA65008 FERRULES 1/8 UNION FITTING PACK 10 each Ex-stock FA7048 PROTECTION CAP SILICONE PACK 10 Ex-stock Fit between printhead D-connector and Amplifier PCB (refer to Service Bulletin SB047). Includes three caps, three plugs, gap gauge and tube cutter. Only applicable to printheads fitted with 1/8" union fitting connectors. Includes caps and plugs for blanking union fittings. Only applicable to printheads fitted with 1/8" union fitting connectors. Front and rear replacement ferrules. Only applicable to printheads fitted with 1/8" Use to cap printhead fluid lines for dust protection during transit. Only applicable to printheads fitted with 1/8" union fitting connectors. 6