MK-MANTA III OWNER S MANUAL PARTS LIST & OPERATING INSTRUCTIONS

Transcription

1 MK-MANTA III OWNER S MANUAL PARTS LIST & OPERATING INSTRUCTIONS Revision Manual Part# 67 Caution: Read all safety and operating instructions before using this equipment. This parts list MUST accompany the equipment at all times.

2 EXPLODED VIEW Manta III 4096 combo fixed p/n VALVE INCLUDED WITH MOTOR USE P/N 348 FOR SERVICE REPLACEMENT FITTING INCLUDED WITH MOTOR USE P/N 555 FOR SERVICE REPLACEMENT MOTOR MOUNT INCLUDED IN Manta Drill Motor Combinations Table Drill Part# Motor Description Manta III ML4004 Combo Fixed 5864 Manta III ML4090 Combo Fixed Manta III ML4094 Combo Fixed Manta III MK Combo Fixed 8

3 PARTS LIST Manta III 4096 combo fixed p/n SCREW, SOC HD CAP, /4-0 X KEY, SQR, 3/8 X MTR, 0 AMP 4096-MIL W/CLUTCH MANTA 3 STAND COMBO FIXED ASSY, CONTROL BOX DUAL SWITCH 0V ASSY, VACUUM PUMP 0V

4 EXPLODED VIEW Manta III 4096 combo TILT p/n VALVE INCLUDED WITH MOTOR USE P/N 348 FOR SERVICE REPLACEMENT FITTING INCLUDED WITH MOTOR USE P/N 555 FOR SERVICE REPLACEMENT MOTOR MOUNT INCLUDED IN Manta Drill Motor Combinations Table Drill Part# Motor Description Manta III ML4004 Combo Tilt Manta III ML4090 Combo Tilt Manta III ML4094 Combo Tilt Manta III MK Combo Tilt 0

5 PARTS LIST Manta III 4096 combo TILT p/n SCREW, SOC HD CAP, /4-0 X KEY, SQR, 3/8 X MTR, 0 AMP 4096-MIL W/CLUTCH MANTA 3 STAND COMBO TILT ASSY, CONTROL BOX DUAL SWITCH 0V ASSY, VACUUM PUMP 0V 58530

6 EXPLODED VIEW Manta III 4096 ANCHOR fixed p/n VALVE INCLUDED WITH MOTOR USE P/N 348 FOR SERVICE REPLACEMENT FITTING INCLUDED WITH MOTOR USE P/N 555 FOR SERVICE REPLACEMENT MOTOR MOUNT INCLUDED IN Manta Drill Motor Combinations Table Drill Part# Motor Description 6734 Manta III ML4004 Anchor Fixed 6735 Manta III ML4090 Anchor Fixed 6737 Manta III ML4094 Anchor Fixed

7 PARTS LIST Manta III 4096 ANCHOR fixed p/n 6736 SCREW, SOC HD CAP, /4-0 X KEY, SQR, 3/8 X MTR, 0 AMP 4096-MIL W/CLUTCH MANTA 3 STAND ANCHOR FIXED ASSY, CONTROL BOX, SINGLE SWITCH 0V

8 EXPLODED VIEW & PARTS LIST Manta III 4096 ANCHOR TILT p/n VALVE INCLUDED WITH MOTOR USE P/N 348 FOR SERVICE REPLACEMENT FITTING INCLUDED WITH MOTOR USE P/N 555 FOR SERVICE REPLACEMENT MOTOR MOUNT INCLUDED IN Manta Drill Motor Combinations Table Drill Part# Motor Description Manta III ML4090 Anchor Tilt 5865 Manta III ML4094 Anchor Tilt Manta III ML Anchor Tilt 4

9 EXPLODED VIEW & PARTS LIST Manta III 4096 ANCHOR TILT p/n SCREW, SOC HD CAP, /4-0 X KEY, SQR, 3/8 X MTR, 0 AMP 4096-MIL W/CLUTCH MANTA 3 STAND ANCHOR TILT ASSY, CONTROL BOX, SINGLE SWITCH 0V

10 EXPLODED VIEW Manta III CORE DRILL ASSY, DRILL STAND, FIXED, COMBO p/n

11 PARTS LIST Manta III CORE DRILL ASSY, DRILL STAND, FIXED, COMBO p/n 5845 WASHER, / SAE FLAT 5094 SCREW, SOC HD CAP, /4-0 X NUT, /-3 HEX WASHER, / SPLIT LOCK LABEL, WARNING, READ MANUAL GASKET, NEOPRENE SPONGE SCREW, /-3 X 3-/ HEX HEAD CAP SCREW, FLAT HD, /4-0 X 3/ FITTING, /4 MNPT X 3/8 BARB LABEL, INFORMATION ON SERVICE LABEL, NOTICE, MOTOR PROBLEMS 5567 LEVEL, CIRCULAR BUBBLE, 3/4 DIA PLATE, AIR SEAL GASKET, AIR SEAL WHEEL, ROLLER CAP, PUSH /" STAINLESS STEEL KNOB, KNURLED HD, /4-0 X -/ PAD, TOGGLE, /4-0 (9/6 X 5/8) SCREW, JACK TAG, SERIAL NUMBER, BLANK RW COLLAR, MANTA 3, / X X 7/ KEY, 3/8" SQR X 5" SCREW, SOC HD, CAP, 3/8-6 X -/ SCREW, HEX HD, TAP, /-3 X 3-/ BRACKET, WHEEL & VAC BASE, M3 VAC TILT (COMP) ASSY, COLUMN W/MK GEAR RACK ASSY, CARRIAGE ASSY, CORE DRILL HUB ASSY, CORE DRILL SPOKE LABEL, WARNING, SILICA, PROP LABEL, QR CODE MOUNT, MOTOR, MIL 78 7

12 EXPLODED VIEW Manta III CORE DRILL ASSY, DRILL STAND, TILT, COMBO p/n WASHER, / SAE FLAT SCREW, SOC HD CAP, /4-0 X NUT, /-3 HEX KNOB, DAVIES, 5/6-8 X WASHER, / SPLIT LOCK LABEL, WARNING, READ MANUAL GASKET, NEOPRENE SPONGE

13 PARTS LIST Manta III CORE DRILL ASSY, DRILL STAND, TILT, COMBO p/n SCREW, /-3 X 3-/ HEX HEAD CAP SCREW, FLAT HD, /4-0 X 3/ FITTING, /4 MNPT X 3/8 BARB LABEL, INFORMATION ON SERVICE LABEL, NOTICE, MOTOR PROBLEMS LEVEL, CIRCULAR BUBBLE, 3/4 DIA PLATE, AIR SEAL GASKET, AIR SEAL WHEEL, ROLLER CAP, PUSH /" STAINLESS STEEL KNOB, KNURLED HD, /4-0 X -/ PAD, TOGGLE, /4-0 (9/6 X 5/8) SCREW, JACK TAG, SERIAL NUMBER, BLANK RW COLLAR, MANTA 3, / X X 7/ KEY, 3/8" SQR X 5" SCREW, SOC HD, CAP, 3/8-6 X -/ SCREW, HEX HD, TAP, /-3 X 3-/ BRACKET, WHEEL & VAC TUBE, TELESCOPING BRACE, MNT ROD, TELESCOPING SUPPORT BRACKET, TELESCOPING ROD SUPRT BASE, M3 VAC TILT (COMP) SCREW, HEX HD, CAP, /-3 X 4-/ ASSY, COLUMN W/MK GEAR RACK ASSY, CARRIAGE ASSY, CORE DRILL HUB ASSY, CORE DRILL SPOKE PIN, COTTER, /6 X 5/ PIN, CLEVIS, /4 X -/ PIN, CLEVIS, /4 X -5/ WASHER, FLAT, M NUT, HEX M LABEL, WARNING, SILICA, PROP LABEL, QR CODE MOUNT, MOTOR, MIL 78 9

14 EXPLODED VIEW Manta III CORE DRILL ASSY, DRILL STAND, FIXED, ANCHOR p/n

15 PARTS LIST Manta III CORE DRILL ASSY, DRILL STAND, FIXED, ANCHOR p/n 5844 WASHER, / SAE FLAT 5094 NUT, /-3 HEX SCREW, HEX HD, 5/6-8 X WASHER, SPLIT LOCK, 5/ WASHER, FLAT, SAE, 5/ WASHER, / SPLIT LOCK LABEL, WARNING, READ MANUAL SCREW, /-3 X 3-/ HEX HEAD CAP LABEL, INFORMATION ON SERVICE LABEL, NOTICE, MOTOR PROBLEMS 5567 LEVEL, CIRCULAR BUBBLE, 3/4 DIA 5749 BRACKET, WHEEL MANTA WHEEL, ROLLER CAP, PUSH /" STAINLESS STEEL SCREW, JACK TAG, SERIAL NUMBER, BLANK RW 7 COLLAR, MANTA 3, / X X 7/ KEY, 3/8" SQR X 5" SCREW, SOC HD, CAP, 3/8-6 X -/ SCREW, HEX HD, TAP, /-3 X 3-/ BASE, ANCHOR, MANTA 3 COMP 5840 ASSY, COLUMN W/MK GEAR RACK ASSY, CARRIAGE ASSY, CORE DRILL HUB ASSY, CORE DRILL SPOKE LABEL, WARNING, SILICA, PROP LABEL, QR CODE MOUNT, MOTOR, MIL 78 3

16 EXPLODED VIEW Manta III CORE DRILL ASSY, DRILL STAND, TILT, anchor p/n WASHER, / SAE FLAT NUT, /-3 HEX KNOB, DAVIES, 5/6-8 X SCREW, HEX HD, 5/6-8 X WASHER, LOCK, SPLIT, 5/

17 PARTS LIST Manta III CORE DRILL ASSY, DRILL STAND, TILT, anchor p/n WASHER, FLAT, SAE, 5/ WASHER, / SPLIT LOCK LABEL, WARNING, READ MANUAL SCREW, /-3 X 3-/ HEX HEAD CAP LABEL, INFORMATION ON SERVICE LABEL, NOTICE, MOTOR PROBLEMS 5567 LEVEL, CIRCULAR BUBBLE, 3/4 DIA BRACKET, WHEEL MANTA WHEEL, ROLLER CAP, PUSH /" STAINLESS STEEL SCREW, JACK TAG, SERIAL NUMBER, BLANK RW 8 COLLAR, MANTA 3, / X X 7/ KEY, 3/8" SQR X 5" SCREW, SOC HD, CAP, 3/8-6 X -/ SCREW, HEX HD, TAP, /-3 X 3-/ TUBE, TELESCOPING BRACE, MNT ROD, TELESCOPING SUPPORT BRACKET, TELESCOPING ROD SUPRT SCREW, HEX HD, CAP, /-3 X 4-/ BASE, ANCHOR, MANTA 3 COMP ASSY, COLUMN W/MK GEAR RACK ASSY, CARRIAGE ASSY, CORE DRILL HUB ASSY, CORE DRILL SPOKE PIN, COTTER, /6 X 5/ PIN, CLEVIS, /4 X -/ PIN, CLEVIS, /4 X -5/ WASHER, FLAT, M NUT, HEX M LABEL, WARNING, SILICA, PROP LABEL, QR CODE MOUNT, MOTOR, MIL 78 33

18 EXPLODED VIEW & PARTS LIST ASSY. COLUMN W/MK GEAR RACK p/n WASHER, #0 SPLIT LOCK COLUMN, MANTA SCREW, 0-3 X / SOCKET HEAD SET GEAR RACK / X 3/4 X 4"

19 EXPLODED VIEW & PARTS LIST ASSY. CARRIAGE p/n BEARING, BALL, 7 X 40 X MM 377 SCREW, SOC HD CAP, /4-0 X KNOB, DAVIES, 5/6-8 X SCREW, SET, CPU PT. /4-0 X 5/ SCREW, FLAT HD, #6-3 X / BODY, CARRIAGE, COMP PLATE, ADJUSTMENT SLIDE, CARRIAGE BACK, CARRIAGE (COMP) HANDLE, CARRIAGE (COMP) NUT, HEX NYLOK SCREW, FLAT HD, #6-3 X 3/ SCREW, PAN HD, /4-0 X 3/ SHAFT, GEAR, SHORT SCREW, SOC HD CAP, /4-0 X -/

20 EXPLODED VIEW & PARTS LIST ASSY. CORE DRILL HUB p/n PLUG, HOLE PLASTIC 3/4" 566 HUB, SLIP HANDLE SCREW, SET, /4-0X/ KNOB, RUBBER, /4-0 X 3/4" LONG

21 EXPLODED VIEW & PARTS LIST ASSY. CORE DRILL SPOKE p/n KNOB, / - 0 FEM BALL SPOKE, SLIP HANDLE

22 EXPLODED VIEW & PARTS LIST ASSY. VACUUM PUMP 0V p/n NIPPLER, /4 NPT X CLOSE GALV PUMP, VACUUM MANTA CORE DRILL FILTER, WATER GAUGE, VACUUM valve, petcock /4" mip fitting, t /4 x /4 x /4 npt elbow, /4mnpt street brakcet, pump hold down screw, truss 0-3 x 3/ screw, flat hd 0-3 x 5/8" assy, vacuum hose

23 EXPLODED VIEW & PARTS LIST ASSY. control BOX, DUAL SWITCH 0V p/n SCREW, PAN HD, #0-4 X 3/ CONNECTOR, CORD /" SCREW, #6-3 X / PAN HEAD SELF TAPPING SCREW, PHILP SELF TAP 0-4 X 5/8" COVER, SWITCH RECEPTACLE, FLANGED 5A 5V AMMETER, MANTA CORE DRILL 0V TRANSFORMER, 0V AC SWITCH, TOGGLE 30 AMP CORD, ELEC, /3 SOOW, YELLOW, 8" PLUG, 0V, L5-0P HARNES, WIRE, DUAL SWITCH RECEPTACLE, FLANGED TWIST-LOCK AMP BOX, SINGLE (COMP) COVER, CONTROL BOX (COMP)

24 EXPLODED VIEW & PARTS LIST ASSY. control BOX, SINGLE SWITCH 0V p/n SCREW, PAN HD, #0-4 X 3/ CONNECTOR, CORD /" SCREW, #6-3 X / PAN HEAD SELF TAPPING SCREW, PHILP SELF TAP 0-4 X 5/8" COVER, SWITCH AMMETER, MANTA CORE DRILL 0V TRANSFORMER, 0V AC SWITCH, TOGGLE 30 AMP CORD, ELEC, /3 SOOW, YELLOW, 8" PLUG, 0V, L5-0P HARNES, WIRE, SINGLE SWITCH RECEPTACLE, FLANGED TWIST-LOCK CON. BOX, SINGLE (COMP) COVER, CON. BOX SINGLE COMP

25 ACCESSORIES accessories ITEM NUMBER DESCRIPTION Core Bits MK-Black- Supreme Grade for Concrete & Asphalt Excellent performance in applications associated with moderate to high steel reinforcement. Available Diameters /" - 6" Core Bits MK-Orange- Premium Grade for Concrete & Asphalt MK-Orange is a premium bit designed for wet drilling applications that include light to moderate steel reinforcement. Available Diameters " - 6" Core Bits MK-Yellow- Standard Grade for Concrete & Asphalt MK-Yellow is an excellent choice for all types of general wet drilling. Available Diameters " - 4" Core Bits MK-Blue Turbo - Professional Grade for Concrete with Steel MK-Blue is an excellent choice for all types of general wet drilling. Available Diameters " - 6" Core Bits MK-Black Turbo - Supreme Grade for Concrete & Asphalt MK-Black is an excellent choice for all types of general wet drilling. Available Diameters " - 6" Core Bit Extensions Multiple tube extensions may be used extending the drilling depth in increments of ". Available Diameters - /4" to 6 /4" For Use with MK-Turbo Bits Only and must be order together Shaft Extensions easily attach to the core bit and allow for a deeper drilling capacity. " Length 5/8" - Male / 5/8" Female - /4" - 7 Male / - /4" - 7 Female Motor Spacer kit for Manta III core drill rigs with Milwaukee motors. Allows rigs to use 6" bits. 4

26 ORDERING, RETURN, & PACKAGING ORDERING INFORMATION You may order MK Diamond products through your local MK Diamond distributor or, you may order direct from MK Diamond. When ordering direct from MK Diamond, please have the following information ready before calling: The Model Number of the saw The Serial Number of the saw Where the saw was purchased and when The Part Number for the part(s) being ordered The Part Description for the part(s) being ordered NOTE: Standard orders are $50.00 or more when ordering direct from MK Diamond. A $6.00 charge will be added to orders having a net billing value under $ A nominal handling fee of $5.00 may apply to some orders. All parts may be ordered by calling toll free to or and asking for Customer Service. For technical questions, call RETURN MATERIALS POLICY To expedite the service relative to the return of a product purchased through MK Diamond, please observe the following: NOTE: When returning all items, they must have been purchased within the previous twelve () months. Have the Model Number of the saw Have the Serial Number of the saw Have the location of where the saw was purchased Have the date when the saw was purchased Contact Customer Service for approval to return the item(s) Obtain a Returned Goods Number (RGA) authorizing the return Follow the packaging instructions in the following section Ensure the RGA number is on the outside of the returned package Ensure your item(s) are prepaid to the destination For returned items, call toll free to or and ask for Customer Service. PACKAGING INSTRUCTIONS Remove the motor and Support Assembly Dry the drill before shipping When packing, include the following: Core Drill, Vacuum Pump and Accessory Pack Package the unit in its original container or one of comparable size (do not ship the unit partially exposed) Ensure all parts are secured in the packaging to prevent moving AUTHORIZED SERVICE CENTERS For quicker repair time, you may contact MK Diamond Customer Service, toll free, at or for the Authorized Service Center closest too you or visit our web site at For technical questions, call

27 CONTACT & LIMITED WARRANTY CONTACT Please contact MK Diamond Products, Inc. Customer Service Department with any questions you might have regarding distributors, parts or service. Telephone: (800) Fax: (30) Customer Service Hours: Monday through Friday, 6AM-4PM PST MK Diamond Products, Inc. 35 Storm Parkway Torrance, CA 9050 MK DIAMOND PRODUCTS, INC. LIMITED WARRANTY MK DIAMOND PRODUCTS, INC. will guarantee every machine they build, to be free from defects in material and workmanship for () one year from date of purchase. The obligation of MK DIAMOND PRODUCTS, INC. under this warranty is limited to the repair or replacement of any parts which, under normal use, prove to be defective in material or workmanship. The parts involved or the unit in question should be returned to MK DIAMOND PRODUCTS, INC. or to a point designated by us, transportation prepaid. This warranty does not obligate us to bear the cost of labor or transportation charges in connection with replacement or repair of defective parts. Likewise, it shall NOT apply to any unit which has been subjected to misuse, neglect or accident. This warranty does NOT apply to any machine which has been repaired or altered outside our factory. This warranty does NOT obligate MK DIAMOND PRODUCTS, INC., with respect to items not of our manufacture, such as engines, motors, hydraulics, etc., which are subject to their own guarantees and warranties. We shall in no event be liable for consequential damages or contingent liabilities arising out of failure of any equipment or parts to operate properly. COPYRIGHT 07, MK DIAMOND PRODUCTS, INC. ALL RIGHTS RESERVED. The MK Diamond logo is a registered trademark of MK Diamond Products, Inc. and may not be used, reproduced, or altered without written permission. All other trademarks are the property of their respective owners and used with permission. MK Diamond may have patents, patent applications, trade marks, copyrights of other intellectual property right covering this product in this document. This manual MUST accompany the equipment at all times. This manual is considered a permanent part of the equipment and should remain with the unit if resold. The information and specifications included in this publication were in effect at the time of approval for printing. 43

28 MK-MANTA CORE DRILL III OWNER'S MANUAL & OPERATING INSTRUCTIONS MK Diamond Products, Inc. 35 Storm Parkway Torrance, CA 9050 Toll-Free: (800) Phone: (30) Fax: (30)