Singlemode SC Connector Kits Polymer Crimp Body. Housing Boot. 3.0 mm Jacketed. Simplex Blue Blue. Duplex Blue Blue
|
|
- Margaret Heath
- 5 years ago
- Views:
Transcription
1 One-piece connector body: Fastest assembly Field installable Anaerobic adhesive compatible Compliant with JIS C-5973 Fibre Channel TIA FOCIS-3 Pre-radiused ceramic ferrules For 125 µm cladding diameter Instruction Sheet com/documents coded to comply with 568C Aqua for 50/125 laser optimized Black for standard 50/125 Beige for 62.5/125 Blue for singlemode for Singlemode SC Connector Kits Polymer Crimp Body Insertion Loss <0.2 db Typical Return Loss <-55 db Typical Durability 200 Cycles for GR-326 Style Product Insertion Loss <0.2 db Typical Return Loss <-59 db Typical Durability 200 Cycles Tested to GR-326 (Test Report ) Tunable 6 positions for Multimode SC Connector Kits Insertion Loss <0.2 db Typical Durability 500 Cycles TIA 586B Compliant Note: All part numbers are RoHS compliant. SC Connectors Simplex Connector Multimode SC Connector Kits Duplex Connector Singlemode SC Connector Kits Polymer Crimp Body GR-326 Style Singlemode SC Connector Kits Crimp Body SC 1.6 mm to 2.0 mm Connector Description Boot Used With Individual Pack Bulk Pack Crimp Tool 900 µm Buffered, 3.0 mm Jacketed Simplex Blue Blue 3.0 mm Jacketed mm Jacketed mm Jacketed µm Buffer N/A Duplex Blue Blue 3.0 mm Jacketed mm Jacketed Description Boot Used With Individual Pack Bulk Pack Crimp Tool 3.0 mm Jacketed (1) (1) Simplex Blue Blue 2.4 mm Jacketed mm Jacketed Duplex Blue Blue 2.4 mm Jacketed mm Jacketed Description Boot Used With Individual Pack Bulk Pack Crimp Tool 900 µm Buffered, 3.0 mm Jacketed Beige Aqua 3.0 mm Jacketed mm Jacketed µm Buffer N/A 900 µm Buffered, 3.0 mm Jacketed Simplex Beige Black 3.0 mm Jacketed mm Jacketed µm Buffer N/A 900 µm Buffered, 3.0 mm Jacketed Beige Beige 3.0 mm Jacketed mm Jacketed mm Jacketed µm Buffer N/A Beige Aqua 3.0 mm Jacketed mm Jacketed mm Jacketed Beige Black Duplex 2.0 mm Jacketed mm Jacketed Beige Beige 2.4 mm Jacketed mm Jacketed Connectors/Adapters/ Tooling & Accessories 1
2 SC Connectors (Continued) SC Connector Components 3.0 mm Jacket mm Jacket 900 µm Buffered Fiber SC Duplex Clip (Black) Use 2 pieces to duplex simplex housings SC Connector Component Selection Chart (bulk packaged) Fiber Type Simplex Connector Sub-Assembly Duplex Clip* Cable Size Crimp Eyelet w/ Heat Shrink Crimp Eyelet Strain Relief ** (2) mm X Singlemode - GR-326 Style 2.4 mm X (2) mm X 900 µm X 3.0 mm X 2.4 mm X Singlemode - Polymer Crimp Body (2) mm X 900 µm X (long) X (short) 2.4 mm X Multimode - Crimp Body ( Ferrule) (2) mm X 900 µm X 3.0 mm X 2.4 mm X Multimode - Polymer Crimp Body ( Ferrule) (2) mm X 900 µm X (long) X (short) * For Fibre Channel compliant assemblies, use one (1) piece each of Y and Y. (Dash refers to color refer to customer drawing for details). ** Strain relief dash number indicates color - see page 55 for details. 54
3 3.0 mm - GR-326 Style 3.0 mm Angled SC Connectors (Continued) SC Strain Reliefs Jacketed Cable Description GR-326 Style Black Red Beige Blue 3.0 mm No mm No mm No mm Yes mm mm Yes SC Strain Reliefs Angled Description Black Beige Blue 3.0 mm Simplex mm Simplex mm 45 Simplex Connectors/Adapters/ Tooling & Accessories µm Short 900 µm SC Strain Reliefs 900 micron Description Black Beige Blue Long (33 mm) 900 µm Short (10 mm) 900 µm GR-326 Style 900 µm GR-326 Style 900 µm SC Low Loss Loopback Connector /125 Multimode Use for Equipment Testing 0.6 db Insertion Loss 0.5" Ferrule Centerline /125 Multimode Use for Equipment Testing 0.8 db Insertion Loss 0.5" Ferrule Centerline Singlemode Use for Equipment Testing 1.5 db Insertion Loss 0.5" Ferrule Centerline 55
4 SC Connectors (Continued) Tight Jacketed SC Connectors Multimode or singlemode Simplex or duplex Tested using MIL-PRF / mm cable SC Commercial Item Description (CID) interim approval by Naval Surface Warfare Center, Dahlgren Division Application In Flight Networks Shipboard Applications Aero Market The tight jacketed SC Connectors are non pullproof versions of the standard connectors that are designed for use with tight construction cable. Unlike standard connectors, this design allows the jacket and buffer to move together, reducing the chances of micro-bends and fiber breakage. Boot, Bend Limiting 56.9 [2.24] Crimp Eyelet / Heat Shrink Assembly Connector Sub Assembly Tight Jacketed SC Connector Kits Fiber Type Kit Description X Simplex, mm Singlemode (blue body & straight boot) X Duplex, mm X Simplex, 2.4 mm X Simplex, mm Multimode (beige body & straight boot) X Duplex, mm X Simplex, 2.4 mm Note: X = -1 for individual package, -2 for bulk package. Instruction Sheet See 56
5 SC Connectors (Continued) SC Adapters Suitable for any SC connector Available with metal or ceramic alignment sleeves Choice of housing materials and colors coded to comply with 568C Aqua for 50/125 laser optimized Black for standard 50/125 Beige for 62.5/125 Blue for singlemode Duplex adapters accept two simplex connectors or one duplex connector Assortment of hybrid configurations available Mounting screws available Slide-on cover available EMI gasketed parts available SC Simplex Adapter - Plastic Flangeless SC Simplex Adapter - Plastic SC Simplex Adapter - Plastic Sleeve Material/Application Beige /MM only Black Aqua Beige Black Aqua Blue Beige Black Aqua Blue /APC Green Flangeless SC Simplex Adapter - Plastic Black Blue Black Aqua Blue Green Connectors/Adapters/ Tooling & Accessories 1 SC Simplex Adapter - Electroless Nickel Electroless Nickel SC Simplex Adapter - Flangeless SC Simplex Adapter - Electroless Nickel Electroless Nickel Note: All part numbers are RoHS compliant. Flangeless SC Simplex Adapter - SC Duplex Adapter - Plastic SC Duplex Adapter - Plastic Sleeve Material/Application Beige /MM only Black Aqua Beige Black Aqua Blue Beige Black Aqua Blue /APC Green
6 SC Connectors (Continued) SC Adapters (Continued) SC Duplex Adapter - Electroless Nickel Electroless Nickel SC Duplex Adapter Shielded SC Duplex Adapter - Electroless Nickel Electroless Nickel SC Duplex Adapter w/ EMI Shielding Designed to help prevent EMI leak Ideal for high-speed applications SC to ST Hybrid Adapters SC to ST Simplex Adapter - Plastic SC to ST Simplex Adapter - Plastic Beige Black Aqua Blue Beige Black Aqua Blue SC to ST Simplex Adapter - Electroless Nickel Electroless Nickel SC to ST Simplex Adapter - 58
7 SC Connectors (Continued) SC to ST Hybrid Adapters (Continued) Flangeless SC to ST Simplex Adapter - SC to ST Duplex Adapter - Plastic Flangeless SC to ST Simplex Adapter - Electroless Nickel Electroless Nickel SC to ST Duplex Adapter - Plastic Beige (MM Only) Black Aqua Beige Black Aqua Blue Beige Black Aqua Blue Connectors/Adapters/ Tooling & Accessories 1 SC to ST Duplex Adapter - Electroless Nickel Electroless Nickel SC to ST Duplex Adapter - Slide-on Retractable Cover for SC Simplex or Duplex Applications The Tyco Electronics slideon retractable cover is used for simplex or duplex SC applications. These retractable doors slip onto the end of existing Tyco Electronics adapters and can be mounted after the adapter has already been installed Blue Simplex SC Beige Simplex SC Green Simplex SC Blue Duplex SC Green Duplex SC 59
8 ST Connectors Epoxy Type Epoxy type connector Pre-radiused ceramic ferrule Available in bulk packages Crimp tool Singlemode Insertion Loss 0.3 db typical Back Reflection <-40 db typical Durability 200 cycles Materials Ferrule Material Body Material Nickel Plated Brass Coupling Nut Material Plated Die Cast Singlemode ST Connector Kits Ferrule Body Coupling Nut Boot Used With Individual Pack Bulk Pack IS Sheet Zinc Yellow (900 µm) 250 µm Fibers Yellow Nickel-plated Zinc (Bend-Limiting) 250 µm Fibers, Brass Zinc Yellow (Short) 250 µm Fibers, Multimode Insertion Loss 0.3 db typical Durability 500 cycles Multimode ST Connector Kits Ferrule Body Coupling Nut Boot Used With Individual Pack Bulk Pack IS Sheet Black (Short) Black (Short) 900 µm Fiber, Polymer Polymer Black (Buffer)/ 250 µm Fibers, Black (Short) 2.4 mm & Zinc Black (Short) Black (Short) Black (Buffer)/ Black (Short) Black (Buffer)/ Black 250 µm Fibers, Nickel-plated (Bend Limiting) 2.4 mm & Brass Zinc Black (Short) 2.4 mm & Black (Right Angle) 250 µm Fibers, 2.4 mm &
9 Multimode Polymer Composite Insertion Loss 0.3 db Typical Durability 500 Cycles Crimp Tool Instruction Sheet Materials Ferrule Composite Polymer Body Polymer Coupling Nut Polymer ST Connectors Epoxy Type (Continued) Polymer Composite Multimode ST Connector Kits Polymer Ferrule Body Coupling Nut Boot Used With Individual Pack Bulk Pack Black (Buffer)/ Black (Short) 250 µm Fibers, Polymer Polymer Black (Short) Connectors/Adapters/ Tooling & Accessories 1 Multimode Stainless Steel Insertion Loss 0.3 db Typical Operating Temp. Range -30 C to +70 C Durability 500 cycles Crimp Tool Instruction Sheet Stainless Steel Materials Ferrule Stainless Steel Body Nickel plated brass Coupling Nut Zinc Multimode ST Connector Kits Stainless Steel Ferrule Body Stainless Steel Ferrule Designation Boot Used With 125 Black (Bend Limiting) Black (Long) 4.3 mm Cable Black (Bend Limiting) Black (Bend Limiting) Black (Bend Limiting) Black (Short)
10 ST Connectors Epoxy Type (Continued) Long Boot PVC Tubing [2.283] Crimp Eyelet Bare Buffer Boot TYGON Tubing [3.071] Connector Assembly Short Boot [1.850] HYTREL Tubing [2.205] Protective Cover Right Angle Boot 62 TYGON is a trademark of Saint-Gobain Performance Plastics Corporation. HYTREL is a trademark of E.I. du Pont de Nemours and Company. ST Connector Component Selection Chart (Bulk Packaged) Fiber Type Connector Sub-Assembly Cable Size Crimp Eyelet Tubing Strain Relief * mm X 2.4 mm X Singlemode mm X Ferrule Body, Nut 3.0 mm X 3.0 mm X 900 µm X mm X 2.4 mm X Multimode mm X Ferrule Body, Nut 3.0 mm X 3.0 mm X 900 µm X mm X 2.4 mm X Multimode mm X Ferrule Body, Polymer Nut 3.0 mm X 3.0 mm X 900 µm X mm X 2.4 mm X Multimode mm X Ferrule Polymer Body, Nut 3.0 mm X 3.0 mm X 900 µm X mm X 2.4 mm X Multimode mm X Ferrule Polymer Body, Polymer Nut 3.0 mm X 3.0 mm X 900 µm X * Strain relief dash number indicates color - see chart on page 63 for details.
11 ST Connectors Epoxy Type (Continued) Bend Limiting Short Right Angle Buffer Bend Limiting Strain Relief Bulk packages (100 pcs./package) Bend Limiting Short (3.0 mm) Right Angle Buffer Short (2.0 mm) Bend Limiting (2.0 mm) Black Blue Beige Connectors/Adapters/ Tooling & Accessories 1 Free-hanging or panel mount design ST Coupling Receptacles Packaging Polymer Composite Single Multimode Bulk (1000) Single Multimode Bulk (50) Zirconia Single Singlemode Bulk (50) ST Polymer Duplex Receptacle /MM Only Beige /MM Only Lt. Almond ST Active Device Mounts Multimode Designed to accept multimode TO-18, TO-46 and TO-52 active devices Nickel plated, die cast zinc Mount to PCB or through panel Includes positioning ring Description Packaging Height Standard height Single Low profile Single Low profile Single (100) Low profile Bulk (50)
12 FC Connectors One-piece connector body: Fastest assembly Compliant with: JIS C-5970 Pre-radiused ferrule Instruction Sheet Singlemode FC Connector Kits - Polymer Crimp Body Insertion Loss <0.2 db Typical Return Loss <-59 db Typical Durability 200 Cycles Singlemode FC Connector Kits Polymer Crimp Body Boot Blue Used With Individual Pack Bulk Pack Crimp Tool 3.0 mm Jacketed mm Jacketed mm Jacketed µm Buffer N/A GR-326 Style FC Connector Kits - Crimp Body Singlemode Insertion Loss <0.2 db Typical Return Loss <-59 db Typical Tested to GR-326 Tuning 6 position GR-326 Style Singlemode FC Connector Kits Crimp Body Boot Used With Individual Pack Bulk Pack 3.0 mm Jacketed Crimp Tool (1) (1) Blue 2.4 mm Jacketed mm Jacketed µm Buffer mm - GR-326 Style FC Strain Reliefs Jacketed Cable Description GR-326 Style Black Red Beige Blue 3.0 mm No mm No mm No mm Yes mm mm Yes mm Angled 900 µm Short FC Strain Reliefs Angled Description Black Beige Blue 3.0 mm Simplex mm Simplex mm 45 Simplex µm FC Strain Reliefs 900 micron Description Black Beige Blue Long (33 mm) 900 µm Short (10 mm) 900 µm GR-326 Style 900 µm GR-326 Style 900 µm
13 FC Connectors (Continued) FC Connector Component Selection Chart (bulk packaged) Simplex Connector Crimp Eyelet w/ Crimp Strain Relief Fiber Type Sub-Assembly Cable Size Heat Shrink Eyelet * mm X Singlemode - GR-326 Style 2.4 mm X mm X 2.4 mm X Singlemode 3.0 mm X Polymer Crimp Body µm X (long) X (short) mm X 2.4 mm X Multimode - Ferrule 3.0 mm µm (long) (short) * Strain relief dash number indicates color - see page 64 for details. Connectors/Adapters/ Tooling & Accessories 1 FC Adapters FC Simplex Square Flange Adapter - Panel Keyway Cut-out Slot (Nom.) Square Flange Std mm Square Flange Std mm FC Square Flange Adapter FC 8 mm/9 mm Dia. Round FC Simplex 8 mm/9 mm Dia. Round (D-Hole) Adapter - Panel Cut-out Keyway Slot (Nom.) (Copper) D-Hole Std mm D-Hole Std mm /APC D-Hole 2.05 mm Type R /APC D-Hole Prec mm FC Simplex 8 mm Dia. Round (Double D-Hole) Adapter - Panel Cut-out Keyway Slot (Nom.) Double D-Hole Std mm FC 8 mm Dia. Round (Double D) 65
14 FC Connectors (Continued) Hybrid Adapters - SC/FC/ST Hybrid FC to ST Simplex Adapter - Electroless Nickel Electroless Nickel FC to ST Simplex Adapter - SC to FC Simplex Adapter - Plastic Black Blue SC to FC Simplex Adapter - Plastic SC to FC Simplex Adapter - Electroless Nickel Electroless Nickel SC to FC Simplex Adapter - Flangeless Simplex Adapter - Electroless Nickel Electroless Nickel Flangeless SC to FC Simplex Adapter - SC to FC Duplex Adapter - Electroless Nickel Electroless Nickel SC to FC Duplex Adapter - 66
LC Connectors. Fiber Optic Products Catalog. One-Piece LC Connector Product Facts
44 One-Piece LC Connector Singlemode Telecordia GR-326 tested (Report #50-652) Multimode TIA/EIA 568-B.3 tested Singlemode and Multimode are compatible with both anaerobic adhesives and heat cure epoxy
More informationExpanded SECURE Connector Product Line Includes MPO and LC Interfaces
Expanded SECURE Connector Product Line Includes MPO and LC Interfaces Ten variants in ten colors offered in two new interfaces Tyco Electronics has expanded its SECURE connector product offering to include
More informationLC Adapters and Cable Assemblies
LC Adapters and meet the growing demand for small form factor, high-density fiber optic connectivity with simplex, duplex, single-mode and multimode options. LC connectors reduce space requirements by
More informationLC Connectors and Adapters
, Adapters and Cable Assemblies meet the growing demand for small form factor, high-density fiber optic connectivity with simplex, duplex, singlemode and multimode options LC connectors reduce space requirements
More informationSPECIFICATION SINGLEMODE MULTIMODE. Premium Connector 0.08dB Typical 0.15dB Typical Standard Connector 0.12db Typical 0.20db Typical Return Loss
12 FC Connector Best used in single mode applications and known for exceptionally accurate positioning, the FC or Fixed Connection Connector is designed for use in unstable environments because of their
More informationHeat-Cure Single-Fiber Connectors A LANscape Solutions Product
Applications Field or factory installations requiring high optical performance Cable Assembly House, OEM and Manufacturing Environments Multiple terminations where material cost is the main consideration
More information1 : LC/PC 0 : None S : Simplex 09 : 0.9mm G : Green W : White. A : LC/APC S : SM D : Duplex 20 : 2.0mm L : Blue. M : MM 30 : 3.
LC Connector The LC connector was the first small form factor connector on the market. The use of a high performance 1.25 mm ferrule gives the connector extremely high performance characteristics. The
More informationAmphe-Lite Series contacts, sealing plugs, plastic dust caps
contacts, sealing plugs, plastic dust caps STANDARD CONTACTS FOR AMPHE-LITE SERIES Pin Socket 8 (Coax) 21-33102-21 21-33101-21 8 (Twinax) 21-33190-529 21-33191-530 10 (Power) 10-251415-105 10-407035-105
More informationEC Series LC Connectors
EC Series LC Connectors Amphenol s data communications EC Series fiber optic LC small form factor (SFF) connectors utilize the familiar RJ-45 latching mechanism. The LC connector is almost half the size
More informationzsfp+ (Small Form-factor Pluggable Plus) 25 Gbps Interconnect System
Molex launches the first complete for serial channels, delivering unparalleled signal integrity with superior EMI protection for next-generation Ethernet and Fibre Channel applications Molex s complete
More informationConnector SPECIFICATION SINGLEMODE MULTIMODE. 126μm +1/-0 Concentricity: 1μm. 127μm 125μm +1/-0 Concentricity: : 1μm
24 LC-UPC Unibody BTW Boot 2.0mm Round Connector Insertion Loss 0.08dB typical UPC 0.10dB typical APC 0.15dB typical 0.04dB typical Super Low Loss 55dB typical UPC 65dB typical APC Durability < 0.2dB typical
More informationCORNING OPTICAL COMMUNICATIONS GENERIC SPECIFICATION FOR SIMPLEX OPTICAL FIBER (MULTIMODE) NO-EPOXY, NO-POLISH CONNECTORS
CORNING OPTICAL COMMUNICATIONS GENERIC SPECIFICATION FOR SIMPLEX OPTICAL FIBER (MULTIMODE) NO-EPOXY, NO-POLISH CONNECTORS October 2017 PGS028 Revision 12 Corning Optical Communications reserves the right
More informationAnaerobic-Cure Connectors
Features and Benefits Quick-cure epoxy No lamps or ovens needed Minimal tools and no index-matching gel Low installation cost Hand polished for minimum insertion loss Reliability and optical performance
More informationApplications Engineering Notes. The US Conec MTP Multifiber Connector
Applications Engineering Notes Document Title Document Number The US Conec MTP Multifiber Connector AEN-1909 Revision Number Rev 2.0 Effective Date June 1, 2008 1.0 Document Purpose The purpose of this
More informationCOMMERCIAL ITEM DESCRIPTION SPECIFICATION SHEET CONNECTORS, FIBER OPTIC, SINGLE FIBER, SMALL FORM FACTOR, LC TYPE
METRIC A-A-59940/ 9 ovember 203 COMMERCIAL ITEM DESCRIPTIO SPECIFICATIO SHEET COECTORS, FIBER OPTIC, SIGLE FIBER, SMALL FORM FACTOR, LC TYPE The General Services Administration has authorized the use of
More informationSC Type Fiber Optic Connectors
SC Type Fiber Optic Connectors HSC Series MU SC FC Features 1. JIS, IEC standards compliant and fully intermateable with NTT's SC products. JIS C 573 (F04 type fiber optic connectors) IEC 61754-4 2. Plugs
More informationHan-Brid. Contents Han-Brid Features Han-Brid Data interfaces Han-Brid Overview Han-Brid Cu
Contents Page Features... 19.02 Data interfaces... 19.03 Overview... 19.04 Cu... 19.06 F.O.... 19.08 Quintax 3 A... 19.10 RJ45 C... 19.12 USB / FireWire... 19.14 Han 4 A SC... 19.16 Hoods/Housings... 19.18
More informationAMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]
MPLIMITE Subminiature D Connectors Hardware Commoning Strip (for HDF-20 Plugs, Size 20 Pin Contacts) Brass,.004 [0.10] thick, tin plated Part No. 206918-2 (Continuous Strip) Used with HDF-20 Plugs page
More informationDIGITUS Fiber Optic Splice Box, 1U, basic housing, color grey (RAL 7035) or black (RAL 9005)
DIGITUS Fiber Optic Splice Box, 1U, Basic Housing Basic housing for splice box assembly Sturdy housing Sliding Available in colors grey and black Abstract DIGITUS Fiber Optic Splice Box, 1U, basic housing,
More informationProduct Catalogue. Fibre Optic Components
Product Catalogue Fibre Optic Components version 2017 Empowering businesses through innovative network solutions. We have been pushing boundaries and providing innovative products and solutions to clients
More informationProduct information 19" 1U UniRack2 24xLC-Duplex G.652.D, PC, ceramic, C/2 R819330
Product information 19" 1U UniRack2 24xLC-Duplex G.652.D, PC, ceramic, C/2 R819330 1 Pcs. 19" 1U slide-in unit, splice tray plate with 2 splice trays radius 40 mm, fastening material, labeling strips and
More informationINTERCONNECT CATALOGUE EDITION 2.1
INTERCONNECT CATALOGUE EDITION 2.1 STANDARD CONNECTOR SERIES pg. 04 SMALL FORM FACTORS pg. 24 SPECIALTY PRODUCTS pg. 40 FERRULES AND SLEEVES pg. 48 POLISHING SYSTEMS pg. 54 STANDARD CONNECTOR SERIES SC-UPC
More informationINTERCONNECT CATALOGUE EDITION 2.1
INTERCONNECT CATALOGUE EDITION 2.1 STANDARD CONNECTOR SERIES pg. 02 SMALL FORM FACTORS pg. 22 SPECIALTY PRODUCTS pg. 38 FERRULES AND SLEEVES pg. 46 POLISHING SYSTEMS pg. 52 STANDARD CONNECTOR SERIES SC-UPC
More informationOptical Fiber Systems. Optical Fiber. Premise Connectivity Systems S Y S T E M S
Premise Connectivity Systems Optical Fiber S Y S T E M S w w w. s i g n a m a x. c o m High-Density Rack-Mount Optical Fiber Enclosures Rack-Mount Optical Fiber Distribution Enclosures Rack-Mount Optical
More informationCloset Connector Housings (CCH)
features and benefits Interconnect and crossconnect capability Removable, translucent top covers (1U, 2U, 3U), removable rear cover (4U) Internal and external strain-relief options Accepts panels, modules
More informationMETRIC MIL-C-83522/16B w/amendment 1 17 AUGUST 2004 SUPERSEDING MIL-C-83522/16B 11 May 1995 MILITARY SPECIFICATION SHEET
METRIC MIL-C-83522/16B 17 AUGUST 2004 SUPERSEDING MIL-C-83522/16B 11 May 1995 MILITARY SPECIFICATION SHEET CONNECTOR, FIBER OPTIC, SINGLE TERMINUS, PLUG, BAYONET COUPLING (ST STYLE), 2.5 MILLIMETERS DIAMETER
More informationOptic Components - Adapters. Adapter FC-Type. Applications: CATV LAN & WAN Network Broadband FTTx. Specification
Adapter FC-Type Applications: CATV LAN & WAN Network roadband FTTx euroclust offers a full line of fibre optic adapters for every application including flanged threaded, metal, composite and hybrid or
More informationUniCam High-Performance Connectors, Multimode and Single-Mode
Features and Benefits Broad operating temperature (-40 to +75 C) Utility and flexibility Factory-polished end face Consistent optical performance Fast termination and no consumables Low installation cost
More informationProCliCk Pre-Polished ConneCtors
ProCliCk Pre-Polished ConneCtors Termination Insert fiber and activate clamp in one simple motion. Precision Low Loss, High Yield Pre-Polished Connector Terminate in Less than 60 Seconds CSI, Drawings
More informationTyco Electronics Corporation
Fiber Optic Products Introduction Tyco Electronics is a globally recognized preeminent supplier of fiber optic connectors and interconnection devices. We offer an extensive variety of optical connectors,
More informationLX.5 (SFOC 1.25) High packing density. High performance. High reliability. High safety. High flexibility
Today, packing density is more important than ever. The LX.5- connector, based on the proven 1.25 mm ferrule technology, is the only standardized small form factor connector combining high packing density,
More informationDIAMOND Fiber Optic Components
DIAMOND Fiber Optic Components CABLE ASSEMBLIES AND ADAPTERS F-3 Simplex PC/APC MULTIMODE PC Telecommunications and Fiber Optics are developing at an incredible speed. To keep up with tomorrow s requirements
More informationPART NUMBER BREAKDOWN CP A 35 1 W D VG0-6
SERIES 35 Shield Sock Adapter Environmental, EMI/RFI Shielding Series 35 Adapters have a length of tinned copper shield attached using either a crimped band or other style of termination band attached
More informationSC Type Fiber Optic Connectors
SC Type Fiber Optic Connectors SC HSC Series FC Jan.1.2018 Attenuators Copyright 2018 HIROSE Environment ELECTRIC CO., LTD. MU All Rights Reserved. Features 1. IEC, JIS standard compliant and intermateability
More informationConnectors Adapters Pigtail & Patch Cord...4-9
Connectors...4-1 Adapters... 4-6 Pigtail & Patch Cord...4-9 4-1 Connectors SC connector assembly instruction 4-2 Connectors FOCSC Fiber optical connector FOCSC-MC3BPB101 FOCSC-SA3YP9101 FOCSC-MC0BP9101
More informationPERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-29504/5D 20 December 2006 SUPERSEDING MIL-PRF-29504/5C 29 July 2004 PERFORMANCE SPECIFICATION SHEET TERMINI, FIBER OPTIC, CONNECTOR, REMOVABLE, ENVIRONMENT RESISTING, SOCKET TERMINUS,
More informationProduct information 19" 1U UniRack 24xLC-Duplex OM4, PC, ceramic, Bm/3 R816749
Product information 19" 1U UniRack 24xLC-Duplex OM4, PC, ceramic, Bm/3 R816749 1 Pcs. Front panel with staggered arrangement of adapters. 19" 1U slide-in unit, splice tray plate with 2 splice trays radius
More informationCONNECTOR SOLUTIONS. FASTConnect FUSEConnect Field Master
CONNECTOR SOLUTIONS FASTConnect Provide some of the fastest terminations in the industry Does not require a crimp or special assembly tools Mechanical, true no epoxy/no polish (NENP) connectors FUSEConnect
More informationCONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Receptacle Kit and a Protective Cover Assembly.
Revised Sept-28-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Instructions CONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Kit
More information8Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Subminiature Series Connectors 109 (Continued) Introduction Product Facts Military qualified connectors conform to the latest amendments of MIL-DTL-24308 Industrial versions available
More informationFiber Optic System. Fiber Optic System. Fiber Optic Rack Mount Solutions
Table of Contents Fiber Optic Plug and Play Cassettes 10 Gig Plug and Play Cassettes................. 71 LC Plug and Play Cassettes.................... 71 SC Plug and Play Cassettes....................
More informationSC Connector Family A Complete Fiber Optic Connector Solution
SC Connector Family A Complete Fiber Optic Connector Solution Features Field mountable connectors Jumpers: simplex, duplex, quad, angled connectors, hybrids Pigtails Connectorized cables Preterminated
More informationSM 126μm SM 125.5μm MM 230μm MM 144μm
LC PREMIUM Connector 931, 932 Series LC PREMIUM UNIBODY GR 326 CERTIFIED 900µm MINI Boot CONNECTOR FERRULE TYPE HOUSING BOOT TYPE BOOT COLOR 931 LC Unibody Simplex 153 SM: Premium 125µm 1 SM: Blue B MINI
More informationF-LINK INTER-CONNECT. Overview. Background. F-LINK Inter-Connect Solution
F-LINK Inter-Connect Solution PRELIMINARY Overview Optical Cable Corporation (OCC ) introduces the F-LINK Inter-Connect platform, which is simply the most remarkable connector system ever conceived. Born
More informationVF-45 TM (SG) Ferrule-Less Interconnect Proposal
VF-45 TM (SG) Ferrule-Less Interconnect Proposal IEEE 802.5 Token Ring. November 10-12, 1998 Tad Szostak - 3M Telecom Systems Division 512-984-3847; tszostak1@mmm.com www.3m.com/volition Plug and Socket
More informationDIAMOND Fiber Optic Components
DIAMOND Fiber Optic Components CABLE ASSEMBLIES AND ADAPTERS E-2000 Simplex PC/APC MULTIMODE PC Constant innovation in the field of fiber optics has created demand for products with ever increasing performance
More informationAmphenol Interconnect Innovation Delivered Worldwide On-time.
Connectors Experience. With 60 years of interconnect experience, from the first industry standard 905 Series SMA to the advanced LX.5 small form-factor connector system and high density MPO multi-fiber
More informationLuxCis fiber optic interconnect solutions. ARINC 801, EN F725 Series
LuxCis fiber optic interconnect solutions ARINC 801, EN4639-4640-4645 F725 Series 7-2 CONTENTS LuxCis Pages Introduction LuxCis key features and advantages... 7-4 Applications... 7-4 Standardization...
More informationEmerging Fiber Termination Solution
n BICSI U.S. NE Region Meeting March 1, 2007 Agenda Introduction Connectorization New solution: Splice-on Connector Applications Features and Procedure Demonstration Conclusion Where connectors show up
More informationPART NUMBER BREAKDOWN CP A 31 1 W D VG0 - SR
SERIES 31 EMI/RFI Lamp Base Thread Shrink Boot Adapter Series 31 Adapters are made with threads similar to a light bulb (lamp-base thread) and come with an e- nut or strain relief that is used to achieve
More informationIP68 Sealed - Mini USB Buccaneer
IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB
More informationFIBER OPTIC CONNECTORS AND ADAPTERS
FIBER OPTIC CONNECTORS AND ADAPTERS PRODUCT CATALOG Engineered by Imagination Suncall America provides advanced fiber optic connectors, adapters and accessories customized for any application. We re focused
More informationFC Type Fiber Optic Connectors
FC Type Fiber Optic Connectors HRFC Series MU SC FC Features 1. JIS, IEC standards compliantand and fully intermateable with NTT's FC products. JIC C 597 (F1 type fiber optic connectors). IEC 61754-13
More information3M Fiber Distribution Units 8400 Series
Communication Markets Division 3M Fiber Distribution Units 400 Series Flexible options to meet growing needs in limited spaces 3M offers a full line of patch panel designs to simplify your cable management
More informationSMA Connectors. RF Coax Connectors. Product Facts
SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes
More informationTE CONNECTIVITY (TE) 09 POS HDF RCPT, MS, LEAD FREE. AMPLIMITE HDF for Flat Ribbon Cable. TE Internal Number:
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS IDC D-SUB CONNECTORS TE CONNECTIVITY (TE) 09 POS HDF RCPT, MS, LEAD FREE AMPLIMITE
More informationAEROSPACE, DEFENSE & MARINE /// MC801 FIBER OPTIC CONNECTORS
MC801 FIBER OPTIC CONNECTORS RUGGED, RELIABLE CONNECTIVITY COMBINING HIGH-PERFORMANCE ARINC 801 TERMINI WITH THE VERSATILITY AND FAMILIARITY OF D38999 SERIES III STYLE CONNECTORS MC801 FIBER OPTIC CONNECTORS
More informationOptical Fiber Assemblies
Optical Fiber Assemblies Installation and Operation Instructions Overview Ocean Optics offers an extensive line of standard and premium grade optical fibers and accessories including patch cords, bifurcated
More informationMission Critical Fiber Optic Solutions
Mission Critical Fiber Optic Solutions Military Fiber Optics Timbercon manufactures fiber optic products that are used in a variety of military applications requiring rigorous testing and certification
More informationC o n n e c t o r s C h a p t e r 183
Connectors Chapter 5 183 Connectors Contents Copper RJ45 FAMILY 700A8 185 LC FAMILY LC Connectors 186 LazrSPEED 189 LC Couplings 190 SC FAMILY SC Connectors 191 SC Connector Clip 192 SC Couplings 193 ST
More informationCrimplok ST* and SC Non-Adhesive Fiber Optic Single & Multi-mode Connectors
Crimplok ST* and SC Non-Adhesive Fiber Optic Single & Multi-mode Connectors Instructions July 2002 78-8073-7660-9-F 1 Contents 1.0 Warnings and Recommendations... 3 2.0 Tool Kit Contents... 4 3.0 Termination...
More informationKRONE FiberPLUS Patchcords and Pigtails. Optical fibres with connectors. Ultra-PC Ultra-PC Polishing P olishing
KRONE FiberPLUS Patchcords and Pigtails now now available av ailable with with Optical fibres with connectors Ultra-PC Ultra-PC Polishing P olishing SC-SM types of polishing: PC, UPC, APC8, APC 9 PC, UPC:
More informationPART NUMBER BREAKDOWN CP A 46 1 W D B1 - VG0-8
SERIES 46 EMI/RFI Shrink Boot Adapter Environmental, Shielding Series 46 EMI/RFI Shrink Boot Adapters allow an outer cable shield to be terminated using either an AS85049/128 Termination Band or Constant
More informationFIBRE OPTIC ENCLOSURES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU
FIBRE OPTIC ENCLOSURES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU FIBREOPTIC RACK MOUNT ENCLOSURE: FIXED The JCS Technologies fixed rack mountable fibreoptic break out enclosure is suitable for patching
More informationSplice Trays An Evolant Solutions Product
Applications For use with indoor or outdoor splice hardware Protects and manages fibers and fiber splices Used at field splice, transition splice and end splice locations Description splice trays use proven
More informationOrdering Guide of the Single-Mode Connectorized Fiber Cables (Pigtails & Jumpers) and Single-Mode Connector Mating Adapters
Page 1 of 9 Ordering Guide of the Single-Mode Connectorized Fiber Cables (Pigtails & Jumpers) and Single-Mode Connector Mating Adapters This document provides assistance with the selection of single-mode
More informationDETAIL SPECIFICATION SHEET CONNECTOR, FIBER OPTIC, SINGLE TERMINUS, PLUG, BAYONET COUPLING (ST STYLE), 2.5 MILLIMETERS DIAMETER FERRULE, EPOXY
METRIC MIL-DTL-83522/16C 28 June 2013 SUPERSEDING MIL-C-83522/16B 11 May 1995 DETAIL SPECIFICATION SHEET CONNECTOR, FIBER OPTIC, SINGLE TERMINUS, PLUG, BAYONET COUPLING (ST STYLE), 2.5 MILLIMETERS DIAMETER
More informationMarch 2018 OM1 MULTIMODE DUPLEX FIBRE OPTIC CABLE 500M OM4 MULTIMODE DUPLEX FIBRE OPTIC CABLE 500M OS2 SINGLEMODE DUPLEX FIBRE OPTIC CABLE 500M
Bulk Fibre Optic Cables & Accessories OM1 MULTIMODE DUPLEX FIBRE OPTIC CABLE 500M ZIPCORD TYPE 1Gbps 62.5/125 500M OPOM1-500 $392.00 Fibre Buffer Jacket Kevlar yarn OM4 MULTIMODE DUPLEX FIBRE OPTIC CABLE
More informationEPIC Circular Connectors CIRCON M23 Series
The M3 connectors have many inherent features which offer application advantages and provide significant benefits for the customer. These features make it one of the most application friendly connectors
More informationFIBRE ENCLOSURES AND SPLICING ACCESSORIES
F/ F/ Assemblies, 8.0 W W W. S I E M O N. C O M SECTION CONTENTS Rack Mount Interconnect Centre.............. 8. 8. Wall Mount Interconnect Centre...............8. 8.5 F/ Mini Wall Mount Interconnect Centre...............8.5
More informationOPTICAL CABLE & CABLE ASSEMBLY
OPTICAL CABLE & CABLE ASSEMBLY FIBER OPTIC INDOOR CABLE MM 50 m (OM2) MULTI LOOSE TUBE CABLE Indoor Thight Buffer LSOH, 4 core NVLINMM2004LSOH MM 62.5 m MM 50 m (OM2) MM 50 m (OM3 550+/ OM4) Direct Burial
More informationglass optical fibers
ü For high ambient temperatures (models with chrome-plated brass and silicone sleeves) ü Executions for extreme environmental conditions ü Small dimensions ü Long sensing ranges ü Suitable for the detection
More informationCable assembly types. L tot. Total length* L tot end-to-end total (min. 0.5 except receptacles)
CABLE ASSEMBLY TYPES Quantity - Please use one request form per cable assembly type End A Cable assembly types End B Patch cord Receptacle Gas tight receptacle L b Breakout L b Single Fiber Drawings are
More informationMU Type Fiber Optic Connectors
Type Fiber Optic Connectors Features H Series Back panel side. JIS, IEC standard compliant and intermateability test certified. Comply with JIS C 98 (F4 type fiber optic connectors) and IEC 64-6. intermate
More informationINTERCONNECT CATALOGUE
INTERCONNECT CATALOGUE SENKO Advanced Components is a recognized leader in the design, manufacturing, sales, marketing and distribution of over 1000 fiber optic products for the global telecom and datacom
More informationRUGGEDIZED HIGH-DENSITY OPTICAL INTERCONNECTS FOR HARSH ENVIRONMENTS
RUGGEDIZED HIGH-DENSITY OPTICAL INTERCONNECTS FOR HARSH ENVIRONMENTS Capabilities Molex Fiber Optics Capabilities Diverse product mix Standard - ST, FC, SC, LC, MPO connectors Loop backs, attenuators Ruggedized
More information62GB. Amphenol Series 62GB. Applications. Features
Applications Features 62GB Amphenol 62GB Series connectors are built to British Standard Specification BS 9522 F00 17 which is similar to US military specification MIL-DTL-26482. They are machined from
More information3M Fiber Distribution Units 8400 Series. The Network of Networks. Flexibility for. Networks. Growing
3M Fiber Distribution Units 8400 Series The Network of Networks Flexibility for Growing Networks Flexible options to meet growing needs in limited spaces 3M offers a full line of patch panel designs to
More informationSC Type Fiber Optic Connectors
Type Fiber Optic Connectors H Series Attenuators POF / PCF Terminators Features 1. IEC, JIS standard compliant and intermateability test certified. Comply with IEC 61754-4 and JIS C 573(F4). intermate
More information3M Fiber Interconnect Solutions. The Network of Networks. High. Performance. Fiber Connections
3M Fiber Interconnect Solutions The Network of Networks High Performance Fiber Connections The future is fiber. And 3M fiber interconnect solutions are leading the way. A complete family of high-performance
More informationPCS PATCH CORD SOLUTIONS PATCH CORD SOLUTIONS
Structured Cabling Solutions PCS PATCH CORDS. HiPerlink 6 Colored Patch Cords- 35,36 HiPerlink 1000 Category 5e Colored Patch Cords- 35,36 Snap-in Icons 36 ScTP Category 5 Patch Cord 37 Category 5 Colored
More informationDesign. Application. All closure sizes are available with three different fiber management systems included in the pack.
Description Design The Universal Closures consist of two plastic end caps type (description see on page 80 f.) and a plastic closure tube. The longitudinally split closure tube is closed with two plastic
More informationCables Fiber & Copper
Updated in 2017 Free Product Guide for Your Network Cables Fiber & Copper Catalog FS.COM Fiber & Copper Cable This catalog is a guide of FS.COM fiber and copper cables including standard LC/SC patch cables,
More informationA wide range of connectors are available to fit very specific needs.
By Larry Johnson In all fiber optic systems, it is necessary to join two fibers together with low signal attenuation while maintaining low reflection levels depending upon the type of system used. Fiber
More informationLC Connector. A High Density Fiber Optic Network Solution. Paul Kolesar Lucent Technologies, Bell Laboratories
A High Density Fiber Optic Network Solution Paul Kolesar Lucent Technologies, Bell Laboratories IEEE 802.3z Gigabit Ethernet March, 1997 Outline Design Background and Goals Product Family Overview Features
More informationQuadrax Contacts, Connectors and Cables
Quadrax Contacts, Connectors and Cables Introduction 2 mm centerlines Designed per ARINC 600 - Supplement 14 Fits into keyed connector inserts for connectors such as: ARINC 404 & 600, General Purpose Rectangular
More informationMU Type Fiber Optic Connectors
Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. MU Type Fiber Optic Connectors HMU Series Features 1. IEC, JIS standard compliant and intermateability test certified. Comply with
More informationOur Most Important Connection is with You. OSIS SECTION 7. OSIS Series
SECTION 7 OSIS OSIS Series Contents Introduction : One Step Interconnect Solution...7-3 Applications...7-3 International Standard Documents Compliance...7-3 Features and Benefits...7-3 Characteristics
More informationFiber Optic Adapters/Interconnect Sleeves A LANscape Solutions Product
Applications Cable assembly house and manufacturing environments Local area networks at the workstation outlet Description To complement our complete offering of factory- and fieldinstallable connectors,
More information1U Multi-Function Fibre Enclosure
FEATURES AND SPECIFICATIONS Features and Benefits The is a configurable rack mount unit for storing and terminating incoming fibre cable. The fibre enclosure has been designed to accommodate various termination
More informationTyco Electronics Corporation
Fiber Optic Products Introduction Tyco Electronics Fiber Optics Business Unit is recognized as the world s preeminent supplier of fiber optic connectors and interconnection devices. We offer an extensive
More informationRack Mount Cabinet with Fiber Mgmt System, accepts up to 3 Adapter Plates. Rack Mount Cabinet with Fiber Mgmt System, accepts up to 6 Adapter Plates
SEPTEMBER 2009 RACK MOUNT CABINETS Be sure to read and completely understand this procedure before applying product. Be sure to select the proper Optical Cable Corporation product before application. Product
More informationFC Type Fiber Optic Connectors
Type Fiber Optic Connectors HR Series Features 1. JIS, IEC standard compliant and intermateability test certified. Comply with IEC 61754-13 and JIS C 5970(type F01). intermate test by NTT certified connector.
More informationFibre Enlosures and Splicing
Fibre Enlosures and Splicing Siemon s fibre enclosures provide feature-rich and easily implemented options for managing critical fibre connectivity. With versions supporting up to 88 fibre ports, Siemon
More informationHDCi LX3 High Density 1U Patch Panel
HDCi LX3 High Density 1U Patch Panel An innovative 1U, 19 rack mountable patch panel, designed for use in high density applications. It offers management of up to 144 fibres using MTP optical cassette
More informationSeries 801 Mighty Mouse Double-Start ACME Thread Receptacle
Series 0 Mighty Mouse ouble-start ACME Thread Receptacle 0-00 and 0-00 Ordering Information Series 0 Rear Panel Jam Nut Mount Shell Style 0 Square Flange Mount Shell Style 0// In-Line Shell Style 0 How
More informationCHAMP Interconnection System
CHAMP Interconnection System Flowchart of CHAMP Connectors: How This Catalog is Organized SECTION 1 SECTION 2 SECTION 3 SECTION 4 SECTION 5 SECTION 6 0.8mm 1.27mm 2.16mm Centerlines [.0315"] [.050"] [.085"]
More informationGeneral SC F728 & FC F729
General SC F728 & FC F729 Radiall, thanks to its new range of SC and FC connectors has greatly improved these traditional fiber optic connectors in terms of technology and reliability. One-piece connector
More informationdecoupled connectors RF Coax Connectors Product Facts
Decoupled Connectors Product Facts Built-in chip capacitors filter high-frequency noise to panel ground PC board mounting with vertical and standard or low-profile right-angle configurations Cable mount
More informationIntroduction. Quadrax Contacts, Connectors and Cables. Product Facts
Introduction Product Facts n 2 mm centerlines n Designed per ARINC 600 Supplement 18 n Fits into keyed connector inserts for connectors such as: ARINC 404 & 600, General Purpose Rectangular (GPR), MIL-DTL-38999
More information