Blue Point Engineering

Transcription

1 ensor Adapter Board Pointing the Way to olutions! Description: This board was designed to allow the control of a solid state relay with a sensor. When the is activated, the onboard micro relay will come ON and turn OFF when the ensor is deactivated. ensor tatus LED Test Button (Activate Relay) Power LED ON & OFF witch olid tate Relay Relay Output A B ensor Attach the ensor to the ensor terminal wire connection. Pay attention to polarity //s. Attach 9VDC power to the board power jack A 9V battery will also work with this controller board. Turn ON the power to the control board. There will be about 25 seconds that will pass before the board starts monitoring the ensor. When the ensor is first powered up, it will give false responses. The delay allows the time to warm up. 9 VDC Power Jack When the is triggered Relay will activate, switching devices connected to relay output terminal ON and then turn OFF connected device when ensor deactivates the onboard Relay. Control / Relay Board Control Board Mini ensor ensor Control / Relay Board Micro ensor ensor Control Board Blue Point Phone (303)

2 ensors Pointing the Way to olutions! General Description: The element is a pyroelectric sensor module (), developed for human body heat detection. The detector sensor combine with a fresnel lens is mounted on a compact PCB together with an analog IC, and limited electronic components to form the control circuit. Power, (), () ensor / Relay connections. (5vdc ensor Power) 9 Vdc power required for control board electronics. olid tate micro Relay builton board.(com. N.O. Contacts wire outputs) Relay Contact Outputs rated at Vdc. module has a 25 sec. Warm ensor Data: Operation Voltage 300 mamp. Operation Current 400mA at 5V Output TTL. Input Gain 68dB. Output Pulse Width 0.5 sec min. Pulsed Operation Temperature 20 Deg C to 50 Deg C. ENOR Control Board OUT () COM () Mini ensor Attach the ensor to the ensor terminal wire connection. Pay attention to polarity //s. to / Relay Board module has a 25 sec. Warm ENOR Control Board COM () OUT () Micro ensor Attach the ensor to the ensor terminal wire connection. Pay attention to polarity //s. to / Relay Board module has a 25 sec. Warm Blue Point Phone (303)

3 ensor Application Pointing the Way to olutions! MP3 etup Application MP3 Audio File and ound Amp UB Module MP3 Playback ound Remote witch ( Rem ) Terminal A B When ensor is triggered, MP3 Audio Playback controller board will activate ON and playback one channel of the prerecorded audio tracks 110 in a random audio playback or sequence tracks 110 playback mode each time sensor is triggered ON. Relay Board Relay Attach the ensor to the ensor terminal wire connection. Pay attention to polarity //s. module has a 25 sec. Warm Micro ensor ensor 9VDC Power upply Blue Point Phone (303)

4 ensor Application Pointing the Way to olutions! ervo Motion Application Relay Board Relay Attach the ensor to the ensor terminal wire connection. Pay attention to polarity //s. module has a 25 sec. Warm Mini ensor ensor When ensor is triggered, Wizard1 controller board will activate ON and playback prerecorded servo movement program 9VDC Power upply Wizard1 Board REM Input Blue Point Phone (303)

5 ensor Use Hints Pointing the Way to olutions! Use black paint across the dome to control the sensativity. ensor Place the sensor behind a slot for sensitivity control. Black Paint ensor Window Place the sensor inside a black tube for sensitivity control. ensor Black Tube Place the sensor behind a cover to hide it ensor View Window Window size for sensitivity control. Blue Point Phone (303)