Non-Contact Safety System CES-AZ
|
|
- Kory Clark
- 5 years ago
- Views:
Transcription
1 Read head CES-A-LSP-... Optimized for aluminum profile mounting LED for the indication of the door position Read head CES-A-LSP-... M plug connector, 3-pin or hard-wire encapsulated cable 8,3 3,3 Mounting distance CES-A-LSP-... R3 18,1 M Ø,2 (2x) With M plug connector With connection cable 7, 97,1 For possible combinations see page 2 LED Attention: The operating distance may vary depending on the background material and installation situation. R 7 Important: Actuators must be ordered separately! See page 2. For connection cable see page Pin assignment Typical operating distance Installed in aluminum profile x mm Y BN WH Screen 3 1 Read head CES-A-LSP 2 1 H11 H12 CES-AZ... SH X -1 - Z Series Cable/connection type/version Cable length [m]/description Order no. / item CES-A-LSP-... V Cable PVC SB M plug connector CES-A-LSP-0V-9 97 CES-A-LSP-V CES-A-LSP-1V CES-A-LSP-V CES-A-LSP-2V CES-A-LSP-SB-99 For Bosch profiles with 8 mm groove 2 screws and 2 clamping pieces Installation material 8-groove Bosch Installation material for CES-A-LSP-... For Bosch profiles with mm groove 2 screws and 2 clamping pieces Installation material -groove Bosch For ITEM profiles with 8 mm groove 2 screws and 2 clamping pieces Installation material 8-groove ITEM 2
2 Technical data read head CES-A-LSP-... Parameter Value Unit Reinforced thermoplastic, fully encapsulated Weight (without connection cable) 0.02 kg Ambient temperature C Any Method of operation Inductive Via evaluation unit Connection type M plug connector, 3-pin LED display White, valid actuator detected In combination with actuator CES-A-BSP-970 Operating distance for center offset m = 0 1) with vertical approach direction (x direction) - Assured switch-off distance S ar - - Cable length l = 0 to 2 m - Switch-on distance - - mm - Assured switch-on distance S ao Switching hysteresis 1 - Cable length m 1) These values apply for the installation of the read head and the actuator in an aluminum profile x mm.
3 Read head CES-A-LNN-... Cube-shaped design 2 x 2 mm Attachment compatible with series CES-A-LNA/LCA LED for the indication of the door position Read head CES-A-LNN-... M8 plug connector, 3-pin or hard-wire encapsulated cable, 2 8 With connection cable 2,7 2 ±0,1 32 LED For possible combinations see page 2,1 Attention: The operating distance may vary depending on the background material and installation situation. Important: Actuators must be ordered separately! See page 3. 2 safety screws Mx1 are supplied 12,3 9 With M8 plug connector,,,1 19, For connection cable see page Pin assignment Typical operating distance Y Screen BN WH H11 H12 SH1 CES-AZ Read head X Z For a side approach direction for the actuator and read head, a minimum distance of s = mm must be maintained so that the operating distance of the side lobes is not entered. Approach directions Series Cable/connection type Cable length [m] Order no. / item CES-A-LNN-... V Cable PVC SC M8 plug connector - 02 CES-A-LNN-0V CES-A-LNN-SC-01
4 Technical data read head CES-A-LNN-... Parameter Value Unit Reinforced thermoplastic (PBT), fully encapsulated Dimensions 2 x 2 x 12 mm Weight (without connection cable) 0.02 kg Ambient temperature C Any Method of operation Inductive Via evaluation unit Connection type M8 plug connector, 3-pin or connection cable LED display White, valid actuator detected In combination with actuator CES-A-BBN-00 Operating distance for center offset m = 0 1) - Assured switch-off distance S ar in x/z direction in y direction Cable length l = 0 to 2 m mm - Switch-on distance Assured switch-on distance S ao Switching hysteresis 1 - In combination with actuator CES-A-BDN-0-70 Operating distance for center offset m = 0 - Assured switch-off distance S ar in x/z direction in y direction Cable length l = 0 to 2 m mm - Switch-on distance Assured switch-on distance S ao Switching hysteresis - - Cable length m 1) These values apply for the surface installation of the read head and the actuator.
5 Read head CES-A-LC.../CES-A-LN... Cube-shaped design 2 x 2 mm Read head CES-A-LNA... (Fortron) Hard-wired encapsulated cable Read head CES-A-LNA-SC (Fortron) M8 plug, 3-pin 8, 8, 12 3,,, 12 l 1) Read head CES-A-LCA... (PE-HD) Hard-wired encapsulated cable, 8 1 Active face , For possible combinations see page 2 2 CES-A-L XXXXXX 32 ±0,1 8 2 ± 0, Seal 2 32 ±0,1 CES-A-L A0 Warning: The operating distance may vary depending on the background material and installation situation. "l" 32,,8 min.38 Important: Actuators must be ordered separately! See page and 7. 2 safety screws Mx1 are supplied 2 safety screws Mx1 are supplied 2 safety screws Mx1 are supplied For connection cable see page Pin assignment Typical operating distance Y Screen BN WH H11 H12 SH1 CES-AZ Read head 1 X 1 1 Z For a side approach direction for the actuator and read head, a minimum distance of s = 3 mm must be maintained so that the operating distance of the side lobes is not entered. Series Cable/connection type Cable length [m] Type Order no. / item CES-A-LCA-... CES-A-LNA-... V Cable PVC V Cable PVC P Cable PUR SC M8 plug connector PE-HD 2) CES-A-LCA-V CES-A-LNA-0V CES-A-LNA-V CES-A-LNA-1V CES-A-LNA-2V CES-A-LNA-0P CES-A-LNA-P CES-A-LNA-1P ) CES-A-LNA-SC CES-A-LNA-SC-EX SC M8 plug connector - ATEX 1) 1) 3) CES-A-LNA-SC-EX 1) EX II 3G Ex nl IIC T70 C (zone 2 gases) 2) Suitable for use in aggressive media (e. g. acids, alkalis) 3) Plug connector suitable for snap-action and screw terminals
6 Technical data read head CES-A-LC.../CES-A-LN... Parameter Value Unit - CES-A-LNA... Fortron, reinforced thermoplastic, fully encapsulated - CES-A-LCA... Plastic PE-HD without reinforcement, fully encapsulated Flat seal material (CES-A-LCA... only) Fluororubber 7 FPM 0 Dimensions 2 x 2 x 12 mm Weight (incl. m cable) 0.3 kg Ambient temperature - CES-A-LCA CES-A-LNA.../CES-A-LNA-SC-EX Method of operation /IP9K Any Inductive Via evaluation unit In combination with CES-A-BBA Operating distance for center offset m = 0 1) - Assured switch-off distance S ar Cable length l = 0 to 2 m - Switch-on distance Assured switch-on distance S ao Switching hysteresis Connection cable - CES-A-LCA.../CES-A-LNA... - CES-A-LNA... Hard-wired encapsulated connection cable, with crimped ferrules PVC,. mm PUR,.8 mm, suitable for drag chain - CES-A-LNA-SC M8 plug connector (snap-action and screw terminals), 3-pin Cable length See ordering table 2 m 1) These values apply for surface installation of the read head and the actuator. C mm 7
7 - Non-Contact Safety System CES-AZ Read head CES-A-LQA-SC Cube-shaped design 0 x 0 mm M8 plug connector (snapaction and screw terminals) Read head CES-A-LQA-SC M8 plug, 3-pin, ,2 7 x1 For possible combinations see page 2 Ø, 0 0 0,2 M8 0 ±0,1 Warning: The operating distance may vary depending on the background material and installation situation. 0 ±0,1 Important: Actuators must be ordered separately! See page. For connection cable see page Pin assignment Typical operating distance BN WH Screen 1 3 Read head Y Y H11 H12 CES-AZ... SH1 - X Z X Z - With actuator CES-A-BBA or CES-A-BCA With actuator CES-A-BQA and evaluation unit CES-AZ B Series Connection type Comment Order no. / item CES-A-LQA-SC SC M8 plug connector 2 safety screws M x 1 are supplied 09 0 CES-A-LQA-SC 8
8 Technical data read head CES-A-LQA-SC Parameter Value Unit Fortron, reinforced thermoplastic, fully encapsulated Dimensions 0 x 0 x.2 mm Weight 0.08 kg Ambient temperature C Any Method of operation Inductive Via evaluation unit In combination with actuator CES-A-BBA or CES-A-BCA Operating distance for center offset m = 0 1) - Assured switch-off distance S ar Cable length l = 0 to 2 m - Switch-on distance Assured switch-on distance S ao Switching hysteresis In combination with actuator CES-A-BQA and evaluation unit CES-AZ B mm Operating distance for center offset m = 0 1) Cable length l = 0 to 2 m - Assured switch-off distance S ar For vertical approach direction - Switch-on distance Assured switch-on distance S ao mm - Switching hysteresis For side approach direction - Switch-on distance Assured switch-on distance S ao Switching hysteresis Cable length m 1) These values apply for surface installation of the read head and the actuator. 9
9 Read head CES-A-LMN-SC 1) Cylindrical design M12 M8 plug connector (snapaction and screw terminals) Read head CES-A-LMN-SC M8 plug, 3-pin Read distance s 3 connected 17 For possible combinations see page 2 Warning: The operating distance may vary depending on the background material and installation situation. Important: Actuators must be ordered separately! See page 8. 1) 32 19,7 M 12x1 Center offset m ) Clear zone (area of the active face without metal housing) 1) M 8x1 For connection cable see page Pin assignment Typical operating distance Y 8 Screen BN WH H11 H12 SH1 CES-AZ Read head X Z 8 A minimum distance of s = 1.2 mm must be maintained. Series Connection type Type Order no. / item CES-A-LMN-SC SC M8 plug connector Housing M CES-A-LMN-SC CES-A-LMN-SC-EX 1) EX II 3G Ex nl IIC T70 C (zone 2 gases) SC M8 plug connector ATEX 1) ) CES-A-LMN-SC-EX 0
10 Technical data read head CES-A-LMN-SC Parameter Value Unit Nickel-plated CuZn housing sleeve Plastic PBT GF cap Dimensions M12 x 1, length 38 mm Weight 0.2 kg Ambient temperature - CES-A-LMN-SC CES-A-LMN-SC-EX Ambient pressure (only of active face in installed condition) - - bar C Method of operation In combination with actuator CES-A-BMB Any Inductive Via evaluation unit Operating distance for center offset m = 0 1) - Assured switch-off distance S ar - - Cable length l = 0 to 1 m mm - Switch-on distance Assured switch-on distance S ao Switching hysteresis Connection M8 plug connector (snap-action and screw terminals), 3-pin Cable length m 1) These values apply for surface installation of the read head in steel. 1
11 Actuator CES-A-BSP Optimized for aluminum profile mounting Actuator CES-A-BSP 18,1 Ø,2 R2 For possible combinations see page 2 7, 97,1 Series Comment Version Order no. / item CES-A-BSP Please order installation material separately 970 CES-A-BSP-970 For Bosch profiles with 8 mm groove 2 screws and 2 clamping pieces Installation material 8-groove Bosch Installation material for CES-A-BSP For Bosch profiles with mm groove 2 screws and 2 clamping pieces Installation material -groove Bosch For ITEM profiles with 8mm groove 2 screws and 2 clamping pieces Installation material 8-groove ITEM Technical data Parameter Value Reinforced thermoplastic, fully encapsulated Unit Weight 0.02 kg Ambient temperature C opposite read head Inductive via read head 2
12 Actuator CES-A-BBN Cube-shaped design 2 x 2 mm Attachment compatible with actuator CES-A-BBA/BCA Actuator CES-A-BBN, 2 8 For possible combinations see page 2 2 ±0, safety screws Mx1 are supplied 12 Series Comment Version Order no. / item CES-A-BBN 2 safety screws M x 1 are supplied 00 CES-A-BBN-00 Technical data Value Parameter Unit Reinforced thermoplastic (PBT), fully encapsulated Dimensions 2 x x 12 mm Weight 0.02 kg Ambient temperature C opposite read head Inductive via read head
13 Actuator CES-A-BDN-0 Cylindrical design mm Actuator CES-A-BDN-0 Installation options For possible combinations see page 2 Ø * min. +0,1,1 0 x * * metal-free zone +0, 2 0 * z y Series Comment Version Order no. / item CES-A-BDN-0 70 CES-A-BDN-0-7 Technical data Value Parameter Unit Macromelt PA-based plastic Dimensions 2 x mm Weight 0.00 kg Ambient temperature C opposite read head Inductive via read head
14 Actuator CES-A-BBA/CES-A-BCA 1) Cube-shaped design 2 x 2 mm Actuator CES-A-BBA (Fortron) Actuator CES-A-BCA (PE-HD) PE-HD Active face 2 32 ± 0, 2 12 ø, ø8 For possible combinations see page 2 CES-A-B , 8 32 ±0,1, Seal, 2 safety screws Mx1 are supplied 2 safety screws Mx1 are supplied Series Comment Type Order no. / item CES-A-BBA 2 safety screws M x 1 are supplied CES-A-BBA CES-A-BBA-EX 2 safety screws M x 1 are supplied ATEX 1) 1) CES-A-BBA-EX CES-A-BCA 2 safety screws M x 1 are supplied PE-HD Flat seal included CES-A-BCA 1) EX II 3G Ex nl IIC T70 C (zone 2 gases) and EX II 3D Ex td A22 T70 C 2) Suitable for use in aggressive media (e. g. acids, alkalis) Technical data Parameter Value - CES-A-BBA Fortron, reinforced thermoplastic, fully encapsulated - CES-A-BCA Plastic PE-HD without reinforcement, fully encapsulated Flat seal material (CES-A-BCA only) Fluororubber 7 FPM 0 Dimensions 2 x 2 x 12 mm Weight 0.02 kg Ambient temperature - CES-A-BBA CES-A-BBA-EX CES-A-BCA /IP9K opposite read head Inductive via read head Unit C
15 - Non-Contact Safety System CES-AZ Actuator CES-A-BQA Cube-shaped design 0 x 0 mm Actuator CES-A-BQA, ,2 For possible combinations see page 2 Ø, 0 0 0,2 0 ±0,1 0 ±0,1 2 safety screws Mx1 are supplied Series Comment Type Order no. / item CES-A-BQA 2 safety screws M x 1 are supplied CES-A-BQA Technical data Value Parameter Unit Fortron, reinforced thermoplastic, fully encapsulated Dimensions 0 x 0 x.2 mm Weight 0.07 kg Ambient temperature C opposite read head Inductive via read head
16 Actuator CES-A-BDA Round design mm Actuator CES-A-BDA Active face For possible combinations see page 2 2,2 Series Comment Type Order no. / item CES-A-BDA 08 7 CES-A-BDA- Technical data Value Parameter Unit Plastic PC Dimensions x 2.2 mm Weight kg Ambient temperature C opposite read head Inductive via read head 7
17 Actuator CES-A-BMB/CES-A-BMB-EX 1) Cylindrical design M12 x 0.7 Actuator CES-A-BMB 0,80 M12x0,7 11 For possible combinations see page 2 Insertion tool 12,3 +0,12-0,0 Insertion tool With the aid of the insertion tool, the actuator CES-A-BMB (cylindrical design) can be screwed into a prepared M12 x 0.7 thread in safety doors. t = 0, 11,1 +0,12-0,0 1, 1 Series Comment Type Order no. / item CES-A-BMB CES-A-BMB CES-A-BMB-EX ATEX 1) 1) CES-A-BMB-EX Insertion tool For actuator CES-A-BMB ) EX II 3G Ex nl IIC T70 C (zone 2 gases) Technical data Parameter Value Stainless steel, Niro Dimensions M12 x 0.7, depth mm Weight kg Ambient temperature C Ambient pressure (only applies if the pressure acts on all sides of the actuator) - - bar opposite read head Inductive via read head Unit 8
Active face 57,5. Series Comment Version Order no. / item. Installation material 8-groove Bosch Installation material for CES-A-BSP
Actuator CES-A-BSP Optimized for aluminum profile mounting Actuator CES-A-BSP 18,1 Ø 5,2 10 6 5 R2 57,5 97,1 CES-A-BSP Please order installation material separately 104970 CES-A-BSP-104970 For Bosch profiles
More informationSafety Switches CES-AR/CET-AR
CES-A-L XXXXXX Safety Switches Component overview for non-contact safety switches Connection cable Safety switch Actuator Bolt CES-A-BBA Page 1 CES-A-BCA Page 1 Page 10 CES-AR-C01-... Page 10 CES-A-BPA
More informationMore than safety. Operating instructions Non-contact safety system CES-A-ABA-01/CES-A-ABA-01B (Unicode)
More than safety. Operating instructions Non-contact safety system CES-A-ABA-01/CES-A-ABA-01B (Unicode) Contents Correct Use 3 Possible combinations for CES components 4 Exclusion of Liability and Warranty
More informationMore than safety. Operating instructions Non-contact safety system CES-A-AEA-02B/CES-A-AEA-04B (Unicode)
More than safety. Operating instructions Non-contact safety system CES-A-AEA-02B/CES-A-AEA-04B (Unicode) Contents Correct Use 3 Possible combinations for CES components 4 Exclusion of Liability and Warranty
More informationSafety System CES-FD. Non-contact safety system CES-FD- Direct connection to decentralized peripheral systems (e.g. ET200pro) PLC
Non-contact safety system CES-FD- Evaluation of signals in the field Connection of CES read heads Connection to the ET200s and ET200pro Familiar EUCHNER AP interface Functional description Field evaluation
More informationTransponder-coded safety systems with external evaluation
Transponder-coded safety systems with external evaluation EN Internationally successful the EUCHNER company Headquarters in Leinfelden-Echterdingen EUCHNER GmbH + Co. KG is a world-leading company in the
More informationProduct Overview Safety Engineering electronic
Product Overview Safety electronic EN Without guard locking Safety System Multifunctional Gate Box MGB With/Without guard With guard locking With guard locking locking Control module MGB-L0 MGB-L1/L2 MGB
More informationLMP 308. Separable Stainless Steel Probe. Stainless Steel Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO / 0.
LMP 08 Separable Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.25 % FSO / 0. % FSO Nominal pressure from 0... mh 2 O up to 0... 250 mh 2 O Output signals 2-wire:
More informationNon-Contact Safety System CES-AZ
, 0 M 8 8,, 7,,,, 0 0 7 0 7 Mounting plate CEM For read head CEM-A-LE0... and actuator CEM-A-BE0... Material stainless steel Mounting plate EMP-L-CEM0 For read head CEM-A-LE0... 9 8 0 8 M - x, 7 Mounting
More informationTechnical Data. General specifications. Rated operating distance s n 3 mm
0102 Model Number Features Direct mounting on standard actuators Compact and stable housing with terminal compartment connection ATEX & IECEX certifications Usable up to SIL 2 acc. to IEC 61508 Weatherproof
More informationOperating Instructions
Non-Contact Safety Switch CES-A-.5 Unicode/Multicode EN Contents 1. About this document... 4 1.1. Scope...4 1.2. Target group...4 1.3. Key to symbols...4 1.4. Supplementary documents...4 2. Correct use...
More informationMicro Limit Switch Series 8064
> For universal application > Versions with snap-action contact positive opening contact > With connecting cable or with single cores when it is used as a built-in device > Width Single limit switch 11
More informationProviding flexible power supply and signal connection there, where it is needed even in hazardous areas for the Zones 1and 2.
e X L i n k exlink 7-pole / 6-pole + PE for Zone 1 and Zone 21 Providing flexible power supply and signal connection there, where it is needed even in hazardous areas for the Zones 1and 2. The exlink 7
More informationIdentification System CIS3A-Mini
Inductive Identification System CISA-Mini One of the smallest plug-in read heads Interface adapter for fitting on the DIN rail in the control cabinet Miniature data carrier, diameter 10 x 4 mm Read distance
More informationDMP 333 DMP 333. Industrial Pressure Transmitter For High Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial
DMP Industrial Pressure Transmitter For High Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Industrial Pressure Transmitter DMP Nominal pressure
More informationTransponder-coded safety switches Interlocking devices and guard locking devices
Transponder-coded safety switches Interlocking devices and guard locking devices EN Internationally successful the EUCHNER company Headquarters in Leinfelden-Echterdingen EUCHNER GmbH + Co. KG is a world-leading
More informationDS 201P. Electronic Pressure Switch. Pressure Port With Flush Welded Stainless Steel Diaphragm. accuracy according to IEC 60770: 0.
Pressure Port With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 600: 0. % FSO Nominal pressure from 0... 60 bar up to 00 bar Contacts, or independent PNP contacts, freely configurable
More informationPneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Bright LED position indicator Automatic end position adjustment Type
More informationLevel Transmitter. Table of dimensions see page 4. Total length B Installation length A SW55 Ø 55 Ø 75
Level Transmitter Construction The GEMÜ level transmitter has an immersion tube with reed contacts and a chain of resistors which are triggered by a float with an integrated permanent magnet. A threaded
More informationVM series. features. web contents. code description. available models. inductive sensors. Cylindrical M12 in AC B H
VM series Cylindrical M2 in AC inductive sensors warranty features warranty Output: cable and M2 plug cable exit Models with 2 wires IP67 protection degree Multivoltage 20...253 Vac web contents Application
More informationMagnetic field sensor Magnetic-inductive Proximity Sensor BIM-M12E-Y1X
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M12 x 1 Chrome-plated brass Rated operating distance 90 mm with DMR31-15-5 magnet DC 2-wire, nom.
More informationEmergency Luminaire for Fluorescent Lamps Series EXLUX 6009
> As wall, ceiling and pendant light fitting or pole mounted light fitting > Version with 2 lamps: 18 W and 36 W > Central locking > All-pole disconnection via N/C switch when opening light fitting or
More informationSection 2. Connectors Field attachable
E L E C T R O N I C C O N N E C T O R S Section 2 Connectors Field attachable 89 SAL M8x1 Connectors Field attachable Nomenclature S A L - 8 - R K W C 4 - L 5,5 SAL Sensor Actor Line Installation size
More informationOperating Instructions
Non-Contact Safety Switch CES-AH-C03-AH-SM (Unicode) EN Contents 1. About this document... 4 1.1. Scope...4 1.2. Target group...4 1.3. Key to symbols...4 1.4. Supplementary documents...4 2. Correct use...
More informationLMP 308i. Separable Stainless Steel Probe Precision. Stainless Steel Sensor. accuracy according to IEC 60770: 0.1 % FSO
Separable Stainless Steel Probe Precision Stainless Steel Sensor accuracy according to IEC 60770: 0. % FSO Nominal pressure from 0... mho up to 0... 00 mho Output signals wire:... 0 ma wire: 0... 0 V others
More informationPneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Automatic end position adjustment With ATEX II cat. G/D and cat. D/G
More informationInductive dual sensor For rotary actuators NI4-DSU35TC-2Y1X2/S933
ATEX category II 2 G, Ex zone 1 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Rectangular, housing DSU35 Plastic, PP-GF30-VO Two outputs for monitoring the position of rotary actuators Mounting
More informationEx magnetic safety sensors, cylindrical form // Series EEx RC Si M30
Ex magnetic safety sensors, cylindrical form // Series EEx RC Si M30 - Ex zone 1 and 2, as well as 21 and 22 - Metal enclosure - Available in stainless steel enclosure - Reed contacts, coded - Actuation
More informationMagnetically Coded Safety Switches CMS
Magnetically Coded Safety Switches CMS EN Internationally successful the EUCHNER company Headquarters in Leinfelden-Echterdingen EUCHNER GmbH + Co. KG is a world-leading company in the area of industrial
More informationOnline data sheet. IN30-E0407K IN3000 Direct NON-CONTACT SAFETY SWITCHES
Online data sheet IN30-E0407K IN3000 Direct A B C D E F H I J K L M N O P Q R S T Detailed technical data Features Sensor principle Ordering information Other models and accessories Number of safe outputs
More informationInductive sensor NI3-EG08K-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M8 x 1 Stainless steel, 1.4427 SO DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR)
More informationVENTIL STANDARD NC TASTER VED ÅBEN
INDUKTIV FØLER FOR TYPE 500 SKRÅSÆDEVENTIL VENTIL STANDARD NC TASTER VED ÅBEN FØLER MED KABEL FØLER MED STIK Føler Dimension føler Tilslutning Materiale føler Varenr. NBB2-2GM50-E2-V M2x, L=50mm Stik,
More informationInductive sensor BI1.5-EG08-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationInductive sensor For rotary actuators NI4-DSU35TC-2Y1X2/S933
ATEX category II 2 G, Ex zone 1 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationJUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits
sales@jumo.co.uk info.us@jumo.net Page /0 JUMO MIDAS C08 OEM Pressure Transmitter Basic Applications compressors machinery and plant engineering industrial pneumatics commercial vehicles building technology
More informationLMP 307. Stainless Steel Probe. Stainless Steel Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % / 0.
LMP 07 Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % / 0. % FSO Nominal pressure from 0... mh O up to 0... 50 mh O Output signals -wire: 4... 0 ma -wire: 0...
More informationØ 11,4 21,5. M9 x 0,5 Ø 12 Ø 11,4. M9 x 0,5 Ø 12. M9 x 0,5
Subminiature 7 series Screw termination M9 8 contacts Degree of protection IP7 Solder termination Moulded versions Diameter, mm Male angled connector 8,, Ø,, Contacts Cable outlet Ordering-No. 99 00 70
More informationDatasheet - CSS 11-30S-D-M-ST
12.02.2013-18:42:30h Datasheet - CSS 11-30S-D-M-ST Safety sensors / CSS 30S Preferred typ Stainless steel enclosure Max. 31 sensors can be wired in series. Connector M12, 8-pole Ø M30 High repeat accuracy
More informationTHERMASGARD TM 65. Immersion screw-in duct temperature measuring transducer, calibratable, with multi-range switching and active output TECHNICAL DATA
Patented quality product (Immersion sensor patent no. DE 10 2012 017 500.0) Calibratable temperature measuring transducer THERMASGARD with eight switchable measuring ranges, continuous linear output, enclosure
More informationSafety switches for hinged doors
C Safety switches for hinged doors Selection diagram FR FM FX FZ FK 18 7 9 snap action overlapped CONTACT BLOCKS 21 NC 1NO+ CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland assembled
More informationMore than safety. Operating Instructions Non-Contact Safety Switch CES-AP-CR2-AH (Unicode) CES-AP-CL2-AH (Unicode)
More than safety. Operating Instructions Non-Contact Safety Switch CES-AP-CR2-AH (Unicode) CES-AP-CL2-AH (Unicode) Contents About this document 3 Correct use 3 Possible combinations for CES components
More informationPneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Bright LED position indicator Automatic end position adjustment Type
More informationCable Glands 757, BVE and 737 Series: Blanking Plugs, Adaptors and Reducers Increased Safety and Flameproof
757 Series Blanking Plugs 737 Series Adaptors and Reducers BVE Series Plastic Blanking Plugs & Sealing Washers Compliance Data: 757 Series Blanking Plugs: ATEX IECEx CE Ex d IIC or Ex e II Ex td A21 IP
More informationMagnetic Field Sensor Magnetic-inductive Proximity Sensor BIM-M12E-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationPneumatic Control Unit for the integrated mounting on process valves
Pneumatic Control Unit for the integrated mounting on process valves Type 890 can be combined with Compact design Pilot valve with high air flow rate Internal control air channel Optical position indicator
More informationstandard, short, preferential, top
ipf electronic gmbh Kalver Straße 27 standard design short design preferential series top series standard, short, preferential, top norm sensing ranges, increased sensing ranges 1100 1 2 1100 norm sensing
More informationContact Dial Thermometers
Data sheet 6852 Page 1/11 Contact Dial Thermometers FL 21 Special features Class 1.5 Display range -4 C to +6 C Temperature controller with actual value display as built-in or add-on device in a stainless
More informationM23 Connectors and cables
Contents Product Description: SAI M23 Connectors.2 Contact assignment.7 Technical data.8 Overview.10 M23 connector for signal transmission.12 M23 connector for power transmission.18 Moulded M23 cables.22
More informationSafety Switches CES-AR/CET-AR
Non-contact safety switches CET-AR-... with guard locking and guard lock monitoring Safety switch with guard locking and integrated evaluation electronics Locking force up to 00 N Up to 0 switches in series
More informationTechnical Data. General specifications Switching element function DC Dual NC Rated operating distance s n 3 mm. Short-circuit protection
NCN-FK-N-V-V 002 Model Number NCN-FK-N-V-V Features Direct mounting on standard actuators Compact and stable housing with terminal compartment connection Fixed setting EC-Type Examination Certificate TÜV99
More informationNon-Contact Safety System CES-AZ
Read head CET-AX-... Read head with guard locking and guard lock monitoring Up to category High locking forces up to 00 N Integrated transponder coding Metal housing Design and functionality With the read
More informationSafety Switches with Separate Actuator, Metal Housing
Selection table for safety switches SG Standard One actuating head made of metal M SR11 RC18 Thread M0x1.5 for cable glands 11-pin + PE 18-pin + PE Two contacts Four contacts NC, Standard M SR11 RC18 Two
More informationInductive sensor BI5-EM18-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationJUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits
Data Sheet 4000 Page /0 JUMO MIDAS C08 OEM Pressure Transmitter Basic Applications compressors machinery and plant engineering industrial pneumatics commercial vehicles building technology Brief description
More informationGEMÜ 4232 Travel sensor for linear actuators
Travel sensor for linear actuators Features ATEX version available as an option Easy fitting to GEMÜ linear actuators Compact, stable housing Durable Can be retrofitted to GEMÜ valves or third-party actuators
More informationLMP 308i. Separable Stainless Steel Probe Precision. Stainless Steel Sensor. accuracy according to IEC 60770: 0.1 % FSO.
LMP 08i Separable Stainless Steel Probe Precision Stainless Steel Sensor accuracy according to IEC 60770: 0. % FSO Nominal pressure from 0... mh O up to 0... 00 mh O Output signals wire:... 0 ma wire:
More informationProduct Overview Automation
EN DE Product Overview Automation Automation at a glance Ident Systems CIS3 CIS3A CIS3A - Mini Read system Read/write system Read system Read/write system Read system Read/write system Head Evaluation
More informationOperating Instructions
Field Evaluation Unit CES-FD-AP- (Unicode/Multicode) EN Contents 1. About this document... 4 1.1. Scope...4 1.2. Target group...4 1.3. Key to symbols...4 1.4. Supplementary documents...4 2. Correct use...
More informationInductive sensor For rotary actuators NI4-DSU35-2Y1X2-H1140
ATEX category II 2 G, Ex zone 1 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationSafe switching and monitoring Non-Contact Safety Sensors
Safe switching and monitoring Non-Contact Safety Sensors Electronic safety sensors are used to detect guard door closure. These sensors use noncontact operating principles (pulse echo or RFID) that limits
More informationDouble piston cylinder, Series TWC Ø6-32 mm double-acting with magnetic piston cushioning: elastic
Bosch Rexroth AG Pneumatics Ambient temperature min./max. +0 C / +60 C Medium Compressed air Max. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure for determining piston forces
More informationODU MINI-SNAP PC Product Description. ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic
ODU MINI-SNAP PC Product Description ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic Cylindrical Connectors are generally available with several locking mechanisms: The most frequently
More informationInductive sensor Dual sensors with extended temperature range NI4-DSU35TC-2Y1X2/S97
ATEX category II 2 G, Ex zone 1 ATEX category II 1 D, Ex-zone 20 for temperatures up to -25 C SIL2 acc. to IEC 61508 Rectangular, housing DSU35 Plastic, PP-GF30-VO Two outputs for monitoring the position
More informationRT2Y Compact temperature switch intrinsic safety
ompact temperature switch intrinsic safety Main Features Excellent repeatability Fix dead band for control and alarm Resistant to accidental overtemperature Intrinsic safety Hazardous area 0, 1, 2 pplications
More informationInductive sensor For rotary actuators NI4-DSU35TC-2Y1X2
ATEX category II 2 G, Ex zone 1 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationInductive sensor BI1.5-EG08-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationStandardized valve series MI-01 Connection pattern according to ISO 5599/1, size 1, 5/2- and 5/3-way NG and 1700 Nl/min (1.636 and 1.
Standardized valve series MI-01 Connection pattern according to ISO 5599/1, size 1, 5/2- and 5/3-way NG 9 1610 and 1700 Nl/min (1.636 and 1.728 Cv) Order code Series and function 1) Plug socket see page
More informationSR B series coded magnetic safety sensors
SR B series coded magnetic safety sensors Selection diagram CONTACTS 0 NC NC+NO NC+NO Contact states are displayed for closed guard SENSOR ACTUATOR OUTPUT TYPE SM B0F Actuation distance mm SM B0F Actuation
More informationPosition Switches Series 8070
www.stahl.de > Enclosures of type of protection "Increased safety > Dimensions and characteristic values according to EN 50041 > Replaceable contact in flameproof enclosure > Positive opening contacts
More informationDatasheet - RSS 36-D-R-ST
14.03.2018-19:30:37h Datasheet - RSS 36-D-R-ST Safety sensors / RSS 36 Thermoplastic enclosure RFID-technology for needs-based protection against tampering Misaligned actuation possible 27 mm x 108.2 mm
More informationMagnetic Field Sensor Magnetic-inductive Proximity Sensor BIM-EG08-Y1X-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationFloat Flow Meter. Flow measurement for translucent liquids and gases DN10 to DN65 mm. Technical data Orifice DN 10 to 65
Float Flow Meter Flow measurement for translucent liquids and gases DN10 to DN65 mm If a medium sufficient flow rate flows from bottom to top through a vertically inserted measuring tube, then the floated
More informationAbsolute Encoders Multiturn
The multiturn encoders 5868 and 5888 with interface and optical sensor technology are ideal for use in all applications with a interface. The encoder supports the isochronous (IRT) mode and is therefore
More informationSR A series coded magnetic safety sensor
SR A series coded magnetic safety sensor Selection diagram CONTACTS 0 +NO NC+NO Contact states are displayed for closed guard ACTUATOR SENSOR SM A0N Actuation distance 5 mm OUTPUT TYPE SR AD N PVC cable
More information21023, 21025, 2/2 Direct solenoid actuated poppet valves
03, 05, / > > Port size: G/4, G/ > > Working from 0 bar up > > Suitable for mediumhigh vacuum down to.33 0 - mbar l/s > > Compact design > > Valves and solenoids are ATEX approved. Additional international
More informationSafety. Detection. Control. MAGNUS RFID ENG - REV
03 2017 1 Next generation RFID safety sensor 03 2017 2 03 2017 3 Next generation sensors for machine safety RFID safety sensors PL e, SIL 3 The application of Magnus RFID sensors can be extremely wide
More informationSafety coded magnetic sensor SR A series
Safety coded magnetic sensor SR A series Selection diagram CONTACTS 0 +NO NC+NO Contacts imply closed protection ACTUATOR SENSOR SM A0N actuation distance 5 mm OUTPUT TYPE SR AD N integrated PVC cable
More informationDatasheet - BNS ZG-ST
22.08.2014-04:52:01h Datasheet - BNS 300-01ZG-ST Safety sensors / BNS 300 Preferred typ thermoplastic enclosure Long life no mechanical wear Ø M30 Suitable for food processing industry Insensitive to transverse
More informationMagnetic Field Sensor for pneumatic cylinders BIM-INT-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationMagnetic Field Sensor Magnetic-inductive Proximity Sensor BIM-EG08-Y1X
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationNAMUR INDUCTIVE SENSOR ATEX/IECEx
INDUCTIVE SENSORS NAMUR INDUCTIVE SENSOR ATEX/IECEx CYLINDRICAL HOUSING 6, Dia. M8MM4MM WIRES D.C. VERSION N CONFORMING: Directive ATEX 94/9/CE Group II Category Gas G (Zone 0) and Dust D (Zone ) (Reference
More informationSupplementary instructions. Plug connector Harting HAN 8D. for continuously measuring sensors. Document ID: 30376
Supplementary instructions Plug connector Harting HAN 8D for continuously measuring sensors Document ID: 30376 Contents Contents 1 For your safety 1.1 Appropriate use... 3 1.2 Impermissible use... 3 1.3
More informationNon-Contact Safety Switch CMS. Magnetic Coding. More than safety.
Non-Contact Safety Switch CMS Magnetic Coding More than safety. Safety More than safety. Emil Euchner, the company s founder and inventor of the multiple limit switch, circa 1928. Around the world the
More informationTechnical data. General specifications. Indicators/operating means. Electrical specifications Operating voltage U B Power consumption P 0 Interface
Release date: 0--9 07:6 Date of issue: 0-0- 009_eng.xml Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service
More informationPHOENIX CONTACT - 01/2008
Ex Basic Terminal Blocks for Intrinsically Safe Signals With Knife Disconnection and Test Connections INTERFACE Data Sheet 102957_00_en PHOENIX CONTACT - 01/2008 1 Description PI-EX-TB and PI-EX-TB/T Ex
More informationRodless cylinders Rodless cylinders Series RMC. Brochure
Brochure Bosch Rexroth AG Pneumatics -SB Ø 16-32 mm double-acting with magnetic piston Slide bearing guide cushioning: pneumatically, adjustable 4 -SB Ø 16-32 mm double-acting with magnetic piston long
More informationSPECIALTY PRODUCTS. Flameproof housing Zones 1-2 and to encase video cameras. Used for onshore and offshore sites and process supervision.
SPECIALTY PRODUCTS Flameproof housing Zones 1-2 and 21-22 to encase video cameras. Used for onshore and offshore sites and process supervision. Description Page Camera Housing eries Video Camera Housings
More informationMore than safety. Inductive Limit Switches
More than safety. Inductive Limit Switches Automation More than safety. Emil Euchner, the company s founder and inventor of the multiple limit switch, circa 98. Around the world the Swabian specialists
More informationCoded magnetic safety sensor SR B series
Coded magnetic safety sensor SR B series Selection diagram CONTACTS 0 NC NC+NO NC+NO Contacts imply closed protection ACTUATOR SENSOR OUTPUT TYPE SM B0F actuation distance mm SM B0F actuation distance
More informationThread length (overall length) material
Cylindrical Proximity Sensor for Mobile Usage Designed and tested to keep your machines moving IP69k tested and certified for highest water resistance e1 type approval (according to automotive directive
More informationSafety switches with separate actuator
Safety switches with separate actuator Selection diagram VF KEYD VF KEYD1 VF KEYD VF KEYD VF KEYD5 VF KEYD6 VF KEYD7 VF KEYD8 VF KEYD10 VF KEYD11 ACTUATORS FR FX FK FW 5 6 7 11 1 14 NC NC snap action snap
More informationSafety switches with separate actuator
A Safety switches with separate actuator Selection diagram VF KEYF VF KEYF1 VF KEYF2 VF KEYF3 VF KEYF VF KEYF ACTUATORS CONTACT BLOCKS 9 snap action overlapped FD FP FL FC 21 22 33 3 3NC 2NO+1NC 1NO+ CONDUIT
More informationSupplementary instructions. VEGADIS adapter. For connection of an external display and adjustment unit or a slave sensor. Document ID: 45250
Supplementary instructions VEGADIS adapter For connection of an external display and adjustment unit or a slave sensor Document ID: 45250 Contents Contents 1 For your safety 1.1 Appropriate use... 3 1.2
More informationMPreC - Pressure Relief Device Order specification sheet
- Pressure Relief Device Order specification sheet -Series LARGE MESSKO PRESSURE RELIEF DEVICE Complete the Order-N o by choosing the specific add-on s: e.g.: LMPRD 685-08-22-N01-00 Order-N o : Parameter
More informationEx emergency pull-wire switches Ex ZS 71
Features/Options: Ex zone 1 and 21 Metal enclosure 2 contacts Wire length up to 35 m Small design Release by push-button (VD) Available without unlocking mechanism (per EN 60947-5-1) Wire pull and breakage
More informationPile Driver Weld Immune Sensors
DC... 190 8, 12, 18, and 30 mm Diameter... 190 3- and 4-Wire DC... 192 8, 12, 18, and 30 mm Diameter... 192 AC/DC... 194 12, 18, and 30 mm Diameter... 194 Pile Driver Sensors P+F s weld immune Pile Driver
More informationControl Stations & Switches: Switches, Circuit Breakers and "Break Glass" Call Points SWE Series: 16 and 20 A Switches Increased Safety
SWE Series: 16 and 2 A Switches Increased Safety 16 A Version - Type 1 16 A Version - Type 2 2 A Version Compliance Data: ATEX - IEC: Zone 1 & 2, 21 & 22 ATEX IEC CE Ex de IIC T6 Ex td A21 T8 C IP66 -
More informationCable Glands. Description Introduction to Cable Glands 399. EEXe Series EEXe Series. A2F, E1FX/E2FX, E1FW/E2FW and T3 Series
Description Page Introduction to Cable Glands 399 EEXe Series 400-401 Polyamide Cable Glands for Unarmored Cable Increased Safety EEXe Series Ex e Certified Ex I Application Entry Thread Seal A2F, E1FX/E2FX,
More informationExCos-P Pressure sensor 20 Pa Pa
ExCos-P Pressure sensor 20 Pa... 7.500 Pa Electrical, explosion-proof pressure / differential pressure sensors 24 VAC/DC supply voltage, 0...10 V / (0) analogue output EC type-approved in acc. with ATEX
More informationTransponder-coded. with guard locking
Transponder-coded safety switch CTP with guard locking The safety switch CTP The new safety switch CTP combines the proven principle of operation of electromechanical safety switches with guard locking
More information