Korry 1380 high-performance switch with oversized display for master caution and warning systems

Size: px

Start display at page:

Download "Korry 1380 high-performance switch with oversized display for master caution and warning systems"

Rosamond Christal Sherman
5 years ago
Views:

LARGE-CAP 3 SWITCH - 30 Korry 3 LED-Illuminated Switch A virtual industry standard for versatile, reliable switching solutions with outstanding illumination Korry 30 high-performance switch with

1 LARGE-CAP 3 SWITCH - 30 Korry 3 LED-Illuminated Switch A virtual industry standard for versatile, reliable switching solutions with outstanding illumination Korry 30 high-performance switch with oversized display for master caution and warning systems Designated the 30 switch, this product in the Korry 3 LED switch series features a standard 5/-inch base with a large display surface for specialized applications. It offers the product reliability and system versatility you expect from the standard 3 switch and features the same lighting and electronic engineering innovations, including a Korry patented electronic circuit design. Its versatile circuit-card assembly (CCA) can accommodate any type of dimming requirement. Korry 30 switches can be found on most military and commercial platforms. Surface-mounted electronics with the latest generation of high-brightness LEDs Uncompromising performance in system interface capabilities Exceptional illumination characteristics such as brightness output and dimming control Bipolar electrical interface Optional night-vision illumination

Korry 30 Assembly and Installation Single-Sleeve Mounting Configuration Connector module Mounting sleeve Switch Spacer Mounting panel Sets cap height above panel (optional).

2 Korry 30 Assembly and Installation Single-Sleeve Mounting Configuration Connector module Mounting sleeve Switch Spacer Mounting panel Sets cap height above panel (optional). Cam (2x) Mounting screw (2x) Locks mounting sleeve against panel. Electrical and Operating Characteristics Switch type Momentary/alternate action, four pole, double throw, form C, single break microswitch IAW MIL-PRF-05 Switch contact ratings Resistive: sea level A at 2 VDC Inductive: sea level 4 A at 2 VDC Lamp: sea level 2.5 A at 2 VDC LED current rating 35 ma max. at 2 VDC, bright mode, full display Total cap travel 0.3 inch max. (4.5 mm) Actuation force 2-5 pounds (0..2 kg) Cap extraction 2-5 pounds (0..2 kg) Mounting torque -20 inch-ounces Actuation life 00,000 cycles (MIL-PRF-225) Temperature -55 C to +5 C (MIL-PRF-225)

30 Configuration Envelope and Panel Cutout (dimensions in inches, for reference only)

connector module 2- uses M302/5-354 crimp pins, uses M302/22-2 crimp pins, accepts AWG

3 30 Configuration Envelope and Panel Cutout (dimensions in inches, for reference only) Single Sleeve and Connector Module (-pin version shown) ± SPACER (OPTIONAL).0 MOUNTING SLEEVE Panel Cutout.5 -Pin Connector Module 5-Pin Connector Module -pin connector module 54-5-pin connector module 2- uses M302/5-354 crimp pins, uses M302/22-2 crimp pins, accepts AWG 22, 24 and 2. accepts AWG 20, 22 and R For additional information, please korry.techinfo@esterline.com 2

4 30 Electrical Schematics and Interface Options Shown are examples of standard circuits. Other options are available upon request. Terminal designations are for reference only. Switch Circuit Lamp Circuit (bipolar design) 3 Terminal identification is optional.

Optical Characteristics RED AMBER GREEN BLUE WHITE Luminance (fl) Chromaticity Dim @ 4 VDC Bright @ 2VDC x y 0.0 0.334 0.0 0.30 0±5 200-500 0.5 0.25 0.0 0.22 0.50 0.430 0.50 0.420 0±5 200-500 0.00 0.30 0.0 0.30 0.200 0.

5 Optical Characteristics RED AMBER GREEN BLUE WHITE Luminance (fl) Chromaticity 4 VDC 2VDC x y ± ± ± ± ± Contrast On Off 0. Min 0 ±0. 0. Min 0 ±0. Luminance and color requirements are for legend types S(B), B(C), W(2D), N(2G2), C(2B), and (2F). Type N legends are used for night visibility and are designed to match the light-plate luminance value. NVIS colors are available per MIL-STD-300. Korry products meet the night-vision compatibility requirements of MIL-STD-300. Contrast shown is for S legends only. Other optical characteristics are available upon request. 0. Min 0 ± Min 0 ±0. 0. Min 0 ±0. Dimming Methodologies Pulse Width Modulation (PWM) LED Incandescent Logic Input 2-to-4-point dimming using multiple ground pins Luminance (fl) Luminance (fl) Variable Voltage Duty Cycle VDC Luminance (fl) Constant Illumination over Variable Voltage Bright Dim VDC For additional information, please korry.techinfo@esterline.com 4

6 Legends Lens Configurations Legend Types S (B) Hidden legend. Letters not visible until illuminated. Lighted colored letters on opaque black background when energized. OFF CONDITION B (C) Hidden legend. Letters not visible until illuminated. Lighted colored background with opaque black letters when energized. W (2D) Opaque black letters on white background. Background shows color when energized. N (2G2) White letters on opaque black background. Letters show color when energized. C (2B) Opaque black letters on colored background. Lighted colored background when energized. (2F) Opaque white letters on dark background. Background shows color when energized. ON CONDITION A A B Full Horizontal split Fonts and Sizes Versus Character Capacities TET Futura Medium Futura Medium Condensed Helvetica Medium Helvetica Medium Condensed News Gothic DIN Mittelschrift 45 DIN Engschrift 45 TET TET TET Character height Lines Characters per line Lines Characters per line Number of characters per line can vary depending on characters selected. Other fonts are available upon request. 5

Environmental Test Specification Contact resistance Contact bounce Touch temperature Permanency of marking Strength of actuating means Thermal shock Vibration Shock Moisture resistance Insulation

7 Environmental Test Specification Contact resistance Contact bounce Touch temperature Permanency of marking Strength of actuating means Thermal shock Vibration Shock Moisture resistance Insulation resistance Dielectric withstanding voltage MIL-STD-202F, Method 30 MIL-PRF-225F MIL-PRF-225/0A (USAF) MIL-STD-202F, Method 25J MIL-PRF-225F MIL-STD-202F, Method 0G, Condition A MIL-STD-0C, Method 54.2, Category B2, Procedure A MIL-STD-202F, Method 23B, Condition B MIL-STD-202F, Method 0F MIL-STD-202F, Method 302, Condition B MIL-STD-202F, Method 30 MIL-STD-202F, Method 05C, Condition B Salt spray* Explosion Sand and dust* Overload cycling Electrical endurance Mechanical endurance Power Audio frequency conducted susceptibility Magnetic effect Induced signal susceptibility Radio frequency susceptibility Radio frequency emission Lightning induced transient Temperature / altitude Field of view Stray light MIL-STD-202F, Method 0D, Condition A MIL-STD-202F, Method 0B MIL-STD-202F, Method 0A MIL-PRF-225F MIL-PRF-225F MIL-PRF-225F RTCA/DO-0D, Section and, Category A RTCA/DO-0D, Section, Category Z RTCA/DO-0D, Section 5, Category Z RTCA/DO-0D, Section, Category Z RTCA/DO-0D, Section 20, Category R RTCA/DO-0D, Section 2, Category M RTCA/DO-0D, Section 22, Category A3C3 MIL-STD-0C, Method 504., Category MIL-PRF-225F MIL-PRF-225F * Results are based on switches being inside of an enclosure. To meet higher requirements, see the back page for sealing options. An enclosure would still be required. Reliability The Korry 3 switch has an MTBF of.5 million hours, which varies by configuration and application. The.5-million-hour MTBF is for a standard full display, assuming a 20-degree C ambient operating temperature and 3,000 flying hours per year. This prediction was performed using 2 Plus from RiAC software. For additional information, please korry.techinfo@esterline.com

3 Switch Accessories Sealing Accessories To meet higher requirements than those listed in the environmental specifications (page ), a bellows seal is an option.

be removed and reinstalled into the connector module. Spacers: available for insertion between the mounting panel and housing flange to position the cap assembly level with an adjacent lightplate.

8 3 Switch Accessories Sealing Accessories To meet higher requirements than those listed in the environmental specifications (page ), a bellows seal is an option. Bellows seal Drip proof Sand and dust Waterproof Humidity Spill proof Salt fog Electrical Interface Accessories Miscellaneous Accessories M302 crimp pins: solder-less wire connections that can easily be removed and reinstalled into the connector module. Spacers: available for insertion between the mounting panel and housing flange to position the cap assembly level with an adjacent lightplate. Connector module: a standard electrical interface that accommodates the M302 crimp-pin feature. Flip-guard assembly: multiple styles available to prevent inadvertent switch actuation. PCB header: for installation onto a PCB or CCA. Connector-module extraction tool: M225/0T234. Custom Options For specific applications, custom circuits and lighting are available upon request. Find out more about Korry switches at or contact us at or korry.techinfo@esterline.com. Esterline 0 Beverly Park Road Everett, WA , Esterline Technology Corporation. Korry is a registered trademark of Esterline Technologies Corporation. SEP Control & Communication Systems

ILLUMINATED PUSHBUTTON SWITCH

Jay-El P/N 10888 JAY-EL 10888 JAY-EL P/N 10888 ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S-2288 Catalog No. 081 11-03 GOLD CONTACTS Sea Level and 0,000 Feet JAY-EL 10888 ENGINEERING SPECIFICATIONS