eserver Integration

Transcription

1 eserver TOPICS Installation Startup Optional Features Help/Resources 9125 Prep - eserver rev April 01 Page 1

2 Obtain a copy of Powerware Installation Guide for IBM Applications and Powerware 9125 User s Guide from URLs noted: select Operating Manuals Powerware 9125 Installation Guide select Operating Manuals Powerware 9125 User s Guide 9125 Prep - eserver rev April 01 Page 2

3 Review eserver physical planning requirements for Volt Ampere (VA) and Watt (W) power draw, volt (V) range, Inlet (power cord) connector type Table - iseries Information or pseries Information Or, by going to - or hamst.pdf Calculate power draw of equipment to be connected to UPS does not exceed UPS rating Equipment Watts Qty Total If TOTAL VA/Watts exceeds UPS rating, contact your local Invensys or IBM Sales Representative to order a 5140 (P60/61) or Prestige (EP5, EP8, U33) UPS P10, P Watts P15, P16 1,050 Watts TOTAL: 9125 Prep - eserver rev April 01 Page 3

4 Table - iseries Information Server VA/Watts Volt Range Inlet Type Optional Towers / / C / / C FC 0551 w/ / / EA C / / C , 5074, 5079, 5033, 5034, 5035 FC0550 w/830 1,684/1, C , 5079, 5033, 5034, 5035, /SB2 1,684/1, C , 5079, 5033, 5034, 5035, Server & Towers in Red (shaded) can not be used with UPS. Contact your local Invensys or IBM 840/SB3 CEC & I/O Representative and L6-30/IEC select a 309 larger UPS such 5074, as 5079, Axxium 5077, ,626/3, Pro (B42, B43, B46, C20 B47) or Prestige (EP5, EP8) UPS Tower VA/Watts Volt Range Inlet Type Server / / C20 820, 830, SB2 5034, ,083/1, C20 820, 830, SB ,100/ C20 820, 830, SB2, 840, SB ,100/ C20 820, 830, SB2, 840, SB / / C14 270, ,170/1, C14 830, SB2, 840, SB3 5066, , 830, SB2, 840, SB3 2,200/1, EA C20 (8079 with 840) / / C Prep - eserver rev April 01 Page 4

5 Table - pseries Information Server VA/Watts Volt Range Inlet Type Optional Towers 7025-F50 560/ / C14 None 7025-F80, 6F1 (620) 860/ / C14 None 7025-HA-F80, HA-6F1 (620)1,720/1, / ea C14 None / / C14 None / / C14 None / / C14 None / / C14 None For other pseries Server & Towers, contact your local Invensys or IBM Representative and select a larger UPS such as Axxium Pro (B42, B43, B46, B47) or Prestige (EP5, EP8) UPS Inlet Connector types explained on Diagram - Understanding UPS Equipment Jumper Cord 9125 Prep - eserver rev April 01 Page 5

6 Understand UPS Characteristics UPS Powerware PN VA Watts Volt Range Used with Server P , iseries: 150, 170, 250, 270 pseries: F50, 150, 170, 270 P , iseries: 150, 170, 250, 270 pseries: F50, 150, 170, 270 P ,500 1, iseries: 250 w/exp, 270 w/exp, FC 0551 w/ 270, 820, pseries: F50, F80 or 6F1 (620), (2ea) HA-F80 or HA-6F1 (620), 150, 170, 270 P ,500 1, iseries: 250 w/exp, 270 w/exp, FC 0551 w/ 270, 820, pseries: F50, F80 or 6F1 (620), (2ea) HA-F80 or HA-6F1 (620), 150, 170, 270 UPS Runtime Receptacles Input Connection Equipment Jumper Cords (full/half) (quantity/type) (quantity/type) P10 5/15 6/5-15 NEMA 5-15P 3/C13 to 5-15P P11 5/15 6/C13 C14 Inlet 6/C13 to C14 P15 9/21 6/5-15 NEMA 5-15P 3/C13 to 5-15P P16 9/21 6/C13 C14 Inlet 6/C13 to C Prep - eserver rev April 01 Page 6

7 Table - UPS Features & Options IBM FC IBM PN Powerware PN Description Used with N Battery Module P10, P N Battery Module P15, P C13 to C14 Equipment Jumper Cord P11, P C13 to 5-15P Equipment Jumper Cord P10, P AS/400 to UPS Interface Cable Kit P10, P11, P15, P Software Suite P10, P11, P15, P N Multi-Port Module P10, P11, P15, P N ConnectUPS Network Modem Card P10, P11, P15, P post rack mount kit P10, P11, P15, P16, 6604, Prep - eserver rev April 01 Page 7

8 Review Integrating Power Connection Charts to Size UPS to your Server Configuration Go to Startup select Technical Presentations 9125 Start-up 9125 Prep - eserver rev April 01 Page 8

9 Plan for Growth! Battery Runtime growth P10 & P11 (5 minutes*) can grow to 1 hour 44 minutes P15 & P16 (9 minutes*) can grow to 2 hours 24 minutes Battery Runtime growth is: Customer Set Up (CSU), Hotplugable & field upgradeable! *At 100% (full) load. P10 & P11 = 700W. P15 & P16 = 1,050W 9125 Prep - eserver rev April 01 Page 9

10 Plan Placement of UPS The UPS enclosure dimension is 3.35 wide x 19.4 deep x 17 high (8.5cm x 43cm x 49cm) in Tower configuration Each battery enclosure (IBM FC 6604 or 6605), requires the same space consideration as the UPS enclosure 9125 Prep - eserver rev April 01 Page 10

11 Plan Floor Loading IBM Model Weight P10 & P11 34lb (15kg) P15 & P16 51lb (23kg) FC Model Weight Used with lb (30kg) P10 & P lb (30kg) P15 & P Prep - eserver rev April 01 Page 11

12 Plan Wiring - Models P10 & P15 Uses standard outlet (receptacle) (120V 15 Amp) Use NEMA 5-15 receptacle (R) Input power cord terminated in NEMA 5-15 Plug (P) included with P10 and P Prep - eserver rev April 01 Page 12

13 Plan Wiring - Models P11 & P16 Uses receptacle (outlet) eserver (iseries or pseries) plugs into NOTE: Use the eserver Power cord to connect the UPS to utility (mains) power Use your standard 10Amp receptacle P11 & P16 use Mains Input power cord from eserver 9125 Prep - eserver rev April 01 Page 13

14 Help/Resources -IBM iseries - Resource for site preparation and product power information 9125 Prep - eserver rev April 01 Page 14

15 Help/Resources -IBM pseries ser5/a4ahamst.pdf 9125 Prep - eserver rev April 01 Page 15

16 Help/Resources - Invensys EMEA TECHNICAL SUPPORT Telephone Graham.Muncer@PSD.Invensys.com SERVICE SUPPORT E Mail Invensys.Service@digitec-direct.co.uk MISSING ACCESSORIES E Mail Missing.accessories@PSD.Invensys.com 9125 Prep - eserver rev April 01 Page 16

17 Help/Resources - Invensys Americas, APAC U.S. & Canada Help Desk (8AM - 8PM EST) M - F , or techsupt@psd.invensys.com Latin America Web Help Desk (8AM - 8PM EST) M - F techsupt@psd.invensys.com Prep - eserver rev April 01 Page 17