Serial Communication Card (SELECT EIA-232/485) Part Number Serial Communication 9787LA0_ (1) Note: Slot C option only.
|
|
|
- Gregory Sanders
- 5 years ago
- Views:
Transcription
1 pbib`qfll`~êçë m~êíkìãäéêëñçêíüépbijtutjp~åçpbijtutjq lêçéêáåöfåñçêã~íáçå OPRMkbeçéâáåë`çìêí mìääã~åit^vvnspjrsmprp^ müçåéwhnkrmvkppoknuvm c~ñwhnkrmvkppoktvvm fåíéêåéíwïïïkëéäáååkåçã bjã~áäwáåñç]ëéäáååkåçã Serial Communication Card (SELECT EIA-232/485) Serial Communication 9787LA0_ (1) Note: Slot C option only. 3 Digital Input / 4 Digital Output / ma Analog Output (SELECT 3 DI / 4 DO / 1 AO) Digital Input Voltage, Output Type 125 Vdc/Vac DI, Electromechanical DO 9787LBA_ (1) 24 Vdc/Vac DI, Electromechanical DO 9787LBB_ (1) 48 Vdc/Vac DI, Electromechanical DO 9787LBC_ (1) 110 Vdc/Vac DI, Electromechanical DO 9787LBD_ (1) 220 Vdc/Vac DI, Electromechanical DO 9787LBG_ (1) 250 Vdc/Vac DI, Electromechanical DO 9787LBH_ (1) Note: Only one (1) 3 DI / 4 DO / 1 AO card per chassis. Note: Unless otherwise specified, all digital outputs are Form A. Copyright SEL Page 1 of 6 WI-12174
2 4 Digital Input / 4 Digital Output (SELECT 4 DI / 4 DO) Digital Input Voltage, Output Type 125 Vdc/Vac DI, Electromechanical DO 9787L1A_ (1) 24 Vdc/Vac DI, Electromechanical DO 9787L1B_ (1) 48 Vdc/Vac DI, Electromechanical DO 9787L1C_ (1) 110 Vdc/Vac DI, Electromechanical DO 9787L1D_ (1) 220 Vdc/Vac DI, Electromechanical DO 9787L1G_ (1) 250 Vdc/Vac DI, Electromechanical DO 9787L1H_ (1) 125 Vdc/Vac DI, Fast High Current Interrupting DO 9787LCA_ (1) 24 Vdc/Vac DI, Fast High Current Interrupting DO 9787LCB_ (1) 48 Vdc/Vac DI, Fast High Current Interrupting DO 9787LCC_ (1) 110 Vdc/Vac DI, Fast High Current Interrupting DO 9787LCD_ (1) 220 Vdc/Vac DI, Fast High Current Interrupting DO 9787LCG_ (1) 250 Vdc/Vac DI, Fast High Current Interrupting DO 9787LCH_ (1) Note: Unless otherwise specified, all digital outputs are Form A. 4 Digital Input / 3 Digital Output (2 Form C and 1 Form B) (SELECT 4 DI / 3 DO) Digital Input Voltage, Output Type 125 Vdc/Vac DI, Electromechanical DO 9787LDA_ (1) 24 Vdc/Vac DI, Electromechanical DO 9787LDB_ (1) 48 Vdc/Vac DI, Electromechanical DO 9787LDC_ (1) 110 Vdc/Vac DI, Electromechanical DO 9787LDD_ (1) 220 Vdc/Vac DI, Electromechanical DO 9787LDG_ (1) 250 Vdc/Vac DI, Electromechanical DO 9787LDH_ (1) 8 Digital Output (SELECT 8 DO) Output Type 8 Form A Electromechanical DO 9787L2A_ (1) 8 Form B Electromechanical DO 9787L2B_ (1) 6 Form A and 2 Form B Electromechanical DO 9787L2C_ (1) 6 Form B and 2 Form A Electromechanical DO 9787L2D_ (1) 4 Form A and 4 Form B Electromechanical DO 9787L2G_ (1) Copyright SEL Page 2 of 6 WI-12174
3 8 Digital Input (SELECT 8 DI) Digital Input Voltage 125 Vdc/Vac 9787L3A_ (1) 24 Vdc/Vac 9787L3B_ (1) 48 Vdc/Vac 9787L3C_ (1) 110 Vdc/Vac 9787L3D_ (1) 220 Vdc/Vac 9787L3G_ (1) 250 Vdc/Vac 9787L3H_ (1) 4 Analog Input / 4 Analog Output (SELECT 4 AI / 4 AO) Input Type ±20 ma or ±10 V, Jumper Selectable 9787L6X_ (1) Note: Only one 4 AI / 4 AO card per chassis. 10 RTD Input Card (SELECT 10 RTD) Input Type RTD Analog Input 9787L9X_ (1) Note: These card kits do not contain a rear panel. Please order a rear panel from the table at the bottom of this document. Note: Slot D option only. 6-Phase AC Current Input (SELECT 6 ACI) Phase Current Winding 3, Phase Current Winding 4 1 Amp Phase Winding 3, 1 Amp Phase Winding L4XA1_ (1) 1 Amp Phase Winding 3, 5 Amp Phase Winding L4XA2_ (1) 5 Amp Phase Winding 3, 5 Amp Phase Winding L4XA5_ (1) Note: Slot E option only. SEL-787-4X Model. 3-Phase AC Current Input / Neutral AC Current Input / 3-Phase AC Voltage (300 Vac) (SELECT 4 ACI / 3 AVI) Neutral Current, Phase Current Winding 3 1 Amp Neutral, 1 Amp Winding L3E72_ (1) 5 Amp Neutral, 5 Amp Winding L3E76_ (1) 1 Amp Neutral, 5 Amp Winding L3E73_ (1) 5 Amp Neutral, 1 Amp Winding L3E77_ (1) Note: Slot E option only. SEL-787-3E Model. Copyright SEL Page 3 of 6 WI-12174
4 3-Phase AC Current Input / 3-Phase AC Voltage and Vsync/Vbat Input (300 V) (SELECT 3 ACI / 4 AVI) Phase Current Winding 3 1 Amp Winding L3S71_ (1) 5 Amp Winding L3S75_ (1) Note: Slot E option only. SEL-787-3S Model. 6-Phase AC Current Input (SELECT 6 ACI) Phase Current Winding 1, Phase Current Winding 2 1 Amp Phase Winding 1, 1 Amp Phase Winding L81_ (1) 1 Amp Phase Winding 1, 5 Amp Phase Winding L82_ (1) 5 Amp Phase Winding 1, 5 Amp Phase Winding L85_ (1) Note: Slot Z option only. Power Supply 125/250 Vdc/Vac (SELECT PSIO / 2 DI / 3 DO) Digital Input Voltage 125 Vdc/Vac Digital Input 9723L1A_ (1) 24 Vdc/Vac Digital Input 9723L1B_ (1) 48 Vdc/Vac Digital Input 9723L1C_ (1) 110 Vdc/Vac Digital Input 9723L1D_ (1) 220 Vdc/Vac Digital Input 9723L1G_ (1) 250 Vdc/Vac Digital Input 9723L1H_ (1) Note: Slot A option only. Power Supply 24/48 Vdc (SELECT PSIO / 2 DI / 3 DO) Digital Input Voltage 125 Vdc/Vac Digital Input 9723L2A_ (1) 24 Vdc/Vac Digital Input 9723L2B_ (1) 48 Vdc/Vac Digital Input 9723L2C_ (1) 110 Vdc/Vac Digital Input 9723L2D_ (1) 220 Vdc/Vac Digital Input 9723L2G_ (1) 250 Vdc/Vac Digital Input 9723L2H_ (1) Note: Slot A option only. Copyright SEL Page 4 of 6 WI-12174
5 Processor Board (SELECT CPU / COM) Input Type Rear Port Type Ethernet Type Protocol Type IRIG-B EIA-232 None Standard 9787L000_ (1) IRIG-B EIA-232 None Standard, DNP3 9787L002_ (1) IRIG-B EIA-232 None Standard, IEC L004_ (1) IRIG-B EIA-232 None Standard, DNP3, IEC L006_ (1) IRIG-B EIA-485 None Standard 9787L010_ (1) IRIG-B EIA-485 None Standard, DNP3 9787L012_ (1) IRIG-B EIA-485 None Standard, IEC L014_ (1) IRIG-B EIA-485 None Standard, DNP3, IEC L016_ (1) IRIG-B EIA-232 Single 10/100 Base-T (Copper) Standard 9787L020_ (1) IRIG-B EIA-232 Single 10/100 Base-T (Copper) Standard, IEC L021_ (1) IRIG-B EIA-232 Single 10/100 Base-T (Copper) Standard, DNP3 9787L022_ (1) IRIG-B EIA-232 Single 10/100 Base-T (Copper) Standard, DNP3, IEC L023_ (1) IRIG-B EIA-232 Single 10/100 Base-T (Copper) Standard, IEC L024_ (1) IRIG-B EIA-232 Single 10/100 Base-T (Copper) Standard, IEC , IEC L025_ (1) IRIG-B EIA-232 Single 10/100 Base-T (Copper) Standard, DNP3, IEC L026_ (1) IRIG-B EIA-232 Single 10/100 Base-T (Copper) Standard, DNP3, IEC , IEC L027_ (1) IRIG-B EIA-485 Single 10/100 Base-T (Copper) Standard 9787L030_ (1) IRIG-B EIA-485 Single 10/100 Base-T (Copper) Standard, IEC L031_ (1) IRIG-B EIA-485 Single 10/100 Base-T (Copper) Standard, DNP3 9787L032_ (1) IRIG-B EIA-485 Single 10/100 Base-T (Copper) Standard, DNP3, IEC L033_ (1) IRIG-B EIA-485 Single 10/100 Base-T (Copper) Standard, IEC L034_ (1) IRIG-B EIA-485 Single 10/100 Base-T (Copper) Standard, IEC , IEC L035_ (1) IRIG-B EIA-485 Single 10/100 Base-T (Copper) Standard, DNP3, IEC L036_ (1) IRIG-B EIA-485 Single 10/100 Base-T (Copper) Standard, DNP3, IEC , IEC L037_ (1) IRIG-B EIA-232 Single 100Base-FX MM LC (Fiber) Standard 9787L040_ (1) IRIG-B EIA-232 Single 100Base-FX MM LC (Fiber) Standard, IEC L041_ (1) IRIG-B EIA-232 Single 100Base-FX MM LC (Fiber) Standard, DNP3 9787L042_ (1) IRIG-B EIA-232 Single 100Base-FX MM LC (Fiber) Standard, DNP3, IEC L043_ (1) IRIG-B EIA-232 Single 100Base-FX MM LC (Fiber) Standard, IEC L044_ (1) IRIG-B EIA-232 Single 100Base-FX MM LC (Fiber) Standard, IEC , IEC L045_ (1) IRIG-B EIA-232 Single 100Base-FX MM LC (Fiber) Standard, DNP3, IEC L046_ (1) IRIG-B EIA-232 Single 100Base-FX MM LC (Fiber) Standard, DNP3, IEC , IEC L047_ (1) IRIG-B EIA-232 Dual 10/100 Base-T (Copper) Standard 9787L060_ (1) IRIG-B EIA-232 Dual 10/100 Base-T (Copper) Standard, IEC L061_ (1) IRIG-B EIA-232 Dual 10/100 Base-T (Copper) Standard, DNP3 9787L062_ (1) IRIG-B EIA-232 Dual 10/100 Base-T (Copper) Standard, DNP3, IEC L063_ (1) IRIG-B EIA-232 Dual 10/100 Base-T (Copper) Standard, IEC L064_ (1) IRIG-B EIA-232 Dual 10/100 Base-T (Copper) Standard, IEC , IEC L065_ (1) IRIG-B EIA-232 Dual 10/100 Base-T (Copper) Standard, DNP3, IEC L066_ (1) IRIG-B EIA-232 Dual 10/100 Base-T (Copper) Standard, DNP3, IEC , IEC L067_ (1) IRIG-B EIA-232 Dual 100Base-FX MM LC (Fiber) Standard 9787L080_ (1) IRIG-B EIA-232 Dual 100Base-FX MM LC (Fiber) Standard, IEC L081_ (1) Copyright SEL Page 5 of 6 WI-12174
6 Processor Board (SELECT CPU / COM) cont. Input Type Rear Port Type Ethernet Type Protocol Type IRIG-B EIA-232 Dual 100Base-FX MM LC (Fiber) Standard, DNP3 9787L082_ (1) IRIG-B EIA-232 Dual 100Base-FX MM LC (Fiber) Standard, DNP3, IEC L083_ (1) IRIG-B EIA-232 Dual 100Base-FX MM LC (Fiber) Standard, IEC L084_ (1) IRIG-B EIA-232 Dual 100Base-FX MM LC (Fiber) Standard, IEC , IEC L085_ (1) IRIG-B EIA-232 Dual 100Base-FX MM LC (Fiber) Standard, DNP3, IEC L086_ (1) IRIG-B EIA-232 Dual 100Base-FX MM LC (Fiber) Standard, DNP3, IEC , IEC L087_ (1) Note: These card kits do not contain a rear panel. Please order a rear panel from the table at the bottom of this document. SEL-787-3,-4 Rear Panels Card Slot Options Slot D Option Slot E Option Slot B (Mainboard) Options RTD ALL EIA-232 Rear None/Single 10/100Base-T (Copper) Ethernet 9777L008 RTD ALL EIA-485 Rear None/Single 10/100Base-T (Copper) Ethernet 9777L006 RTD ALL EIA-232 Rear Single/Dual 100Base-FX (Fiber) Ethernet 9777L004 RTD ALL EIA-232 Rear Dual 10/100Base-T (Copper) Ethernet 9777L002 Empty or Standard I/O ALL EIA-232 Rear None/Single 10/100Base-T (Copper) Ethernet 9777L007 Empty or Standard I/O ALL EIA-485 Rear None/Single 10/100Base-T (Copper) Ethernet 9777L005 Empty or Standard I/O ALL EIA-232 Rear Single/Dual 100Base-FX (Fiber) Ethernet 9777L003 Empty or Standard I/O ALL EIA-232 Rear Dual 10/100Base-T (Copper) Ethernet 9777L001 Copyright SEL Page 6 of 6 WI-12174
SELect I/O Cards Part Numbers for the SEL 710 5
SELect I/O Cards s for the SEL 710 5 Ordering Information OPRMkbeçéâáåë`çìêí mìääã~åit^vvnspjrsmprp^ müçåéwhnkrmvkppoknuvm c~ñwhnkrmvkppoktvvm fåíéêåéíwïïïkëéäáååkåçã bjã~áäwáåñç]ëéäáååkåçã Serial Communication
SEL-2411 Programmable Automation Controller
SEL-2411 Programmable Automation Controller - Chassis - Processor and Communications Board - Front Panel - EIA-232 Port - LCD Display - IRIG-B Time Code - Operator Control Interface - Power Supply with
SEL-2414 Transformer Monitor
SEL-2414 Transformer Monitor SEL-2414 Base Unit Vertical Chassis Front Panel Large LCD Display 4 Programmable Pushbuttons w/leds 7 Programmable LEDs Operator Control Interface EIA-232 Port Processor and
SEL-710 Motor Protection Relay
SEL-710 Motor Protection Relay SEL-710 ase Unit Vertical hassis Front Panel Large L isplay 4 Programmable Pushbuttons w/8 LEs 8 Target LEs (6 Programmable) Operator ontrol Interface EI-232 Port Processor
SEL-700G Generator and Intertie Protection Relays
SEL-700 enerator and Intertie Protection Relays SEL-700 ase Unit Vertical hassis Front Panel Large L isplay 4 Programmable Pushbuttons w/8 LEs 8 Target LEs (6 Programmable) Operator ontrol Interface EI-232
Maximize process uptime with the SEL-patented motor thermal model.
SEL-710 Motor Protection Relay Maximize process uptime with the SEL-patented motor thermal model. Optimize motor performance with separate thermal models for the stator and rotor. Monitor stator and ambient
Protect induction and synchronous motors with one relay.
SEL-710-5 Motor Protection Relay Protect induction and synchronous motors with one relay. Patented, accurate thermal protection improves motor availability for production. Synchronous motor protection
Power Quality and Recording Field Upgrade Available SEL-734, Standard Power Quality, 32 MB Memory SEL-734P, Advanced Power Quality, 128 MB Memory*
SEL-734 Advanced Metering System with ANSI and IEC Class 0.2 Accuracy Standard with: ANSI Type 2 Optical Port, 2 Rear EIA-232 Ports, ACSELERATOR QuickSet SEL-5030 Software, Modbus RTU Communications Protocol,
NTX Series Product Comparison
NTX Function Primary design application Pole-top/pad-mount switch automation; small substation installations Small substation installations with medium serial and Ethernet port requirements Some legacy
Firmware. Control Cable Interface
SEL-651R-2 Recloser Control with Automatic Network Reconfiguration, Harmonic Analysis, Single-Phase Trip Capability, 6 Voltage Inputs, Power Quality Monitoring, 8 Settings Groups, Template Storage, SEL
Protect induction and synchronous motors with one relay
SEL-710-5 Motor Protection Relay Protect induction and synchronous motors with one relay Patented, accurate thermal protection improves motor availability for production. The 5-inch, 800 480 color touchscreen
Real-Time Automation Controller (RTAC) Powerful, reliable, and secure multifunction controller
SEL-3530 Real-Time Automation Controller (RTAC) Powerful, reliable, and secure multifunction controller Versatile RTAC operates as a supervisory control and data acquisition (SCADA) remote terminal unit
2 ms arc-flash protection and feeder relay in one platform
Feeder Protection Relay 2 ms arc-flash protection and feeder relay in one platform Combine light sensor inputs with high-speed overcurrent protection to achieve secure arc-flash protection in as fast as
USB Interface. Power Supply. Manual Raise/Lower Operators. Communications Port (Port 1) Communications Port (Port 2)
SEL-2431 Single-Phase Voltage Regulator Control, Two 120 Vac Voltage Inputs, Eight Contact Inputs (Two 120 Vac Programmable, Four 12 Vdc Self-Whetted Programmable, and Two Dedicated), Seven Contact Outputs
A low-cost, economical solution for distribution feeder protection
SEL-351A Protection System A low-cost, economical solution for distribution feeder protection Achieve sensitive and secure fault detection using comprehensive protection functions. Track breaker status
Submittal Data Sheet WAGO Node for itm
The WAGO Node integrates ancillary equipment into the Intelligent Touch Manager (itm) DCM601A71 with the use of DI, DO, AI and AO signals. It provides monitoring and control of non-daikin equipment via
INDUSTRIAL RTU & I/O DEVICES
Sixnet Automation Series INDUSTRIAL RTU & I/O DEVICES www.redlion.net/sixnet Sixnet Automation Series Sixnet rugged RTUs and I/O provide a simple yet powerful means to reliably monitor and control remote
SEL-2411P Pump Automation Controller Data Sheet
SEL-2411P Pump Automation Controller Complete System for Control and Monitoring SELECT I/O Family of Cards Analog I/O Including ac and dc Digital I/O High Reliability, Low Price Ten-Year, Worldwide Warranty
BITRONICS 878 DIOD Product Description BITRONICS 878 DIOD DISTRIBUTED INPUT/OUTPUT DEVICE
BITRONICS 878 DIOD Product Description BITRONICS 878 DIOD DISTRIBUTED INPUT/OUTPUT DEVICE This page intentionally left blank 2 l BITRONICS 878 DIOD APPLICATION NOTE 878 Distributed Input/Output Device
Protection, Automation, and Control System. Combine subcycle line protection with complete substation bay control
Protection, Automation, and Control System Combine subcycle line protection with complete substation bay control Subcycle distance protection minimizes damage and expensive repairs on transmission lines.
Advanced Line Differential Protection, Automation, and Control System. Combine subcycle line protection with traveling-wave fault locating
Advanced Line Differential Protection, Automation, and Control System Combine subcycle line protection with traveling-wave fault locating Subcycle differential and distance protection minimizes damage
2 ms arc-flash protection and feeder relay in one platform
Feeder Protection Relay 2 ms arc-flash protection and feeder relay in one platform Directly monitor and control your system using the 5-inch, 800 480 color touchscreen display. Prevent insulation damage
SCADAPack ES. Smart RTU
Smart RTU 1 Meeting the demands for high-speed distributed control and automation systems, Schneider Electric offers the SCADAPack ES as an advanced Smart RTU. Our highest performance Smart RTU built on
SCADAPack ES. Smart RTU
Smart RTU 1 Meeting the demands for high-speed distributed control and automation systems, Schneider Electric offers the as an advanced Smart RTU. Our highest performance Smart RTU built on a native DNP3
Specifications SmartACU2000B-D-PLC SmartACU2000B-D-2PLC SmartACU2000B-D-PID/PLC SmartACU2000B-D-2PID/2PLC Configuration
ACU2000B ACU2000B ( Array Controller) is a powerful integration of PV array communication and other smart functions. What s more, it supports 1000V/1100V/1500V DC system perfectly. built-in PID2000 module
SmartVFD Frame 8 Wiring Diagrams and Dimensional Drawings
Smart Frame 8 Wiring Diagrams and Dimensional Drawings Smart Frame Size 8 460 Vac: 00-50 HP 08/0 Vac: 50-75 HP SPECIFICATION DATA CONTENTS Smart Frame 8 Wiring Diagrams... Frame 8, Fused Disconnect Wiring
www. ElectricalPartManuals. com Protective Relays HIGHLIGHTS PROTECTIVE FUNCTIONS ixp-420 Transformer Protection Relay
Protective Relays Electrical Apparatus ixp-420 Transformer Protection Relay 165-420 Figure 1: Edison Idea Relay The ixp-420 is a member of Cooper Power Systems Edison Idea line of protective relays. The
MINER-S Station Controller
MINER-S Station Controller Substation Automation MINER-S Station Controller The MINER-S Station Controller is a SCADA enabled fixed point remote terminal unit (RTU) with a data concentrator, event reporter,
High-speed transformer differential protection for up to five terminals
Transformer Protection Relay High-speed transformer differential protection for up to five terminals Advanced differential protection and three restricted earth fault (REF) elements minimize damage and
S5-115U. Application
S5-115U S5-115U Design Central configuration Distributed configuration Note General technical specifications S5-115U Principle of operation Program memory Processor Programming S5-115U Cyclic program execution
Modular Real-Time Automation Controller. Dependable control for harsh environments in a fully integrated, flexible platform
Modular Real-Time Automation Controller Dependable control for harsh environments in a fully integrated, flexible platform Real-Time Automation Controller (RTAC) provides high-speed, deterministic control
Advanced distribution feeder solution with integrated protection, monitoring, and control
Protection System Advanced distribution feeder solution with integrated protection, monitoring, and control Achieve sensitive and secure fault detection using comprehensive protection functions. Keep track
Bus Bar Protection Relay B-PRO 4000
Bus Bar Protection Relay B-PRO 4000 Product Overview The IEC 61850 station bus embedded B-PRO 4000 relay provides complete bus and substation differential protection (low impedance) with CT saturation
SEL-487B. A Powerful Solution for Busbar Differential Protection. Bus Differential and Breaker Failure Relay
Bus Differential and Breaker Failure Relay A Powerful Solution for Busbar Differential Protection Features and Benefits Select the for the differential protection of busbar systems with up to 18 terminals.
Redundant System Redundant System P9-1-1
.. P-- Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P-- idcs-8830/idcs-8830r - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
EATON Transformer Module
www.eaton.com EATON Module Quick Start Standard Features When used with standard system, EATON Module provides isolated and Step-down 0/08/0 V AC outputs. Multiple Output receptacles: 0/08/0 V AC. 86-86000-0
Lightweight and flexible recloser control for single-phase applications
SEL-35S Kestrel Single-Phase ecloser Control Lightweight and flexible recloser control for single-phase applications Plug-and-work operation with popular single-phase reclosers simplifies new and retrofit
MP211 HARDWARE MANUAL
MP211 HARDWARE MANUAL MP211 PLC Series 10 / 2017 MIKRODEV_HM_MP211_EN V1.1 CONTENTS 1 MP211 GENERAL INFORMATION... 6 1.1 Physical Interfaces... 6 1.2 General Device Specifications... 7 2 INSTALLATION INFORMATION...
Comprehensive protection for large, medium, and small generators
SEL-700G Generator Protection Relay Comprehensive protection for large, medium, and small generators Provide primary and backup generator protection with current, voltage, frequency, distance, power, and
RTAC. SEL Real-Time Automation Controller. Integrate station control, a web-based HMI, and logging through one reliable system.
SEL-3530-4 Real-Time Automation Controller Integrate station control, a web-based HMI, and logging through one reliable system. Features and Benefits Integrated Security As with its bigger brother, the
Commercial Ethernet Media Converters
AFL s range of commercial media converters extend communication distances between network devices via fibre optic cables, providing reliable performance up to 1G bps. Designed for commercial installations,
Protection, Automation, and Bay Control System. Advanced feeder protection and complete substation bay control in one economical system
SEL-451 Protection, Automation, and Bay Control System Advanced feeder protection and complete substation bay control in one economical system Customize distribution protection using multiple instantaneous,
S800 I/O ABB Automation
S800 I/O 3BCNIIT F HW02-S800-V0102 Rev. 02/01 Page 1 S800 I/O S800 I/O 3 : Fieldbus Communication Interface (FCI) I/O Module Module Termination Unit (MTU), Compact or Extended version 3BCNIIT F HW02-S800-V0102
ftserver 3300 Service Bulletin
ftserver 3300 Service Bulletin Last Updated 2/12/04 1. Overview The ftserver 3300 is based on the 2.4-GHz or 3.06-GHz Intel IA32 architecture using Intel s Xeon processors and one-way or two-way (one or
Bus Differential and Breaker Failure Relay. Advanced bus protection with built-in breaker failure detection
SEL-487B Bus Differential and Breaker Failure Relay Advanced bus protection with built-in breaker failure detection Protect busbars with up to 21 terminals using high-speed, low-impedance bus differential
Intech Micro 2300-RO4 analogue input station MODBUS RTU slave application supplementary manual.
Intech Micro 2300-RO4 analogue input station MODBUS RTU slave application supplementary manual. MODBUS supplementary manual to the 2300-RO4 Installation Guide. The 2300 series stations are designed to
Providing the missing piece in your Condition Based Monitoring platform
QUALITROL Transformer Monitoring System Providing the missing piece in your Condition Based Monitoring platform Modular design; full customization of monitoring parameters to meet specification Reduce
RTU300 SERIES HARDWARE MANUAL
RTU300 SERIES HARDWARE MANUAL RTU310/RTU320/RTU330/RTU340/RTU350 RTU Series 10 / 2017 MIKRODEV_HM_RTU300_EN V1.0 CONTENT 1 RTU300 GENERAL INFORMATION... 7 1.1 Physical Interfaces... 7 1.2 General Device
Installing the H2 -EBC(100), H2 -EBC -F or H4 -EBC( -F)
12 Installing the H2 -EBC(100), H2 -EBC -F or H4 -EBC( -F) In This Chapter Network Identifiers Setting the Module ID The H2 Series EBC DIP Switch The H4 Series EBC DIP Switch Inserting the H2 Series EBC
Current Fault Signatures and Analysis Auto-calibrating metrology means the meter maintains its accuracy over temperature and time
Multilin EPM 9900 High Performance Power Quality and Transient Recorder Meter The EPM 9900 is one of the most advanced monitoring products on the market today, providing you with the total picture of energy
SCC Inc. TS Series. Technical Instructions Document No. TS-1050 March 10, TS Serial Communication Kits for use with LMV3, LMV5, and RWF Controls
SCC Inc. TS Serial Communication Kits for use with LMV3, LMV5, and RWF Controls Technical Instructions March 10, 2017 Description A TS series serial communication kit connects a Siemens LMV linkageless
FVT Slot Media Converter Chassis w/ Redundant Power User Manual
FVT-4000 10-Slot Media Converter Chassis w/ Redundant Power User Manual Ver. 1.00-0609 Table of Contents 1. INTRODUCTION... 1 1.1. FEATURES... 1 1.2. PACKAGE CONTENTS... 2 2. HARDWARE DESCRIPTION... 3
PM174 PM174 IEEE1159 ADVANCED POWER QUALITY ANALYZER. Features
PM174 IEEE1159 ADVANCED POWER QUALITY ANALYZER The PM174 is a compact, multi-function, three-phase AC powermeter and power quality analyzer specially designed to meet the requirements of users ranging
Preface. Media Converter
Preface This manual describes how to install and use the Ethernet Media Converter with the link-fault-pass-through function. The Converter introduced here provides one channel media conversion between
MAXIOM. Data Sheet. Lighting Relay Panel. Overview Leverage the Power of BAS Integration
Data Sheet Lighting Relay Panel Overview Leverage the Power of BAS Integration Exterior with Surface Mount Trim The Series UL Listed, Lighting Control Panel provides the capability to control high voltage
HC900 Redundant Hybrid Controller Assemblies
Page 1 of 5 HC900 Redundant Hybrid Controller Assemblies Model Selection Guide Power Supplies 120/240VAC, 60W 120/240VAC, 28W Note 5 24Vdc, 60W Redundant Controller Rack Redundant CPU Rack Controller C70R
Bus Differential and Breaker Failure Relay. Advanced bus protection with built-in breaker failure detection
SEL-487B Bus Differential and Breaker Failure Relay Advanced bus protection with built-in breaker failure detection Protect busbars with up to 21 terminals using high-speed, low-impedance bus differential
Bus Differential and Breaker Failure Relay. Advanced bus protection with built-in breaker failure detection
SEL-487B Bus Differential and Breaker Failure Relay Advanced bus protection with built-in breaker failure detection Protect busbars with up to 21 terminals using high-speed, low-impedance bus differential
One relay for safety and process continuity
Motor Management Relay One relay for safety and process continuity Improve safety at each motor control center (MCC) with secure, fast arc-flash detection. Use the enhanced thermal model for more precise
S5-115U. Application
S5-115U Application S5-115U Design Central configuration Distributed configuration Note General technical specifications S5-115U Principle of operation Program memory Processor Programming S5-115U Cyclic
Remote Terminal Unit ER1000 APPLICATION FEATURES
Remote Terminal Unit ER1000 ERL with more than three decades of expertise in Power System Protection have developed state of the art Automation Solutions. The whole family of ERL s Remote Terminal Unit
xin 4, xio 4x4 and xout 4
Data Sheets xin 4, xio 4x4 and xout 4 T +1.425.778.7728 F +1.425.778.7727 www.symetrix.co xin 4 xin 4 Audio input (A/D) expander for SymNet systems that capitalizes on the surplus DSP of a Dante-enabled
iologik E1200 Series Ethernet remote I/O with 2-port Ethernet switch Introduction Remote I/O Daisy-Chained Ethernet I/O Connection
iologik E1200 Series Ethernet remote I/O with 2-port Ethernet switch User-definable Modbus/TCP Slave addressing Supports EtherNet/IP* adapter mode Supports RESTful API for IIoT applications 2-port Ethernet
Smart Network Access System
The Smart Network Access System from Network Critical allows you to deploy all of your appliances risk-free in your network infrastructure while ensuring complete visibility of all traffic flowing on your
TCP. Control and Protection Terminal Data sheet
TCP Control and Protection Terminal Data sheet DSE_TCP_eng_AP No part of this publication may be reproduced by whatever means without the prior written permission of Ingeteam T&D. One of the main aims
EPM Multilin ADVANCED POWER QUALITY METER. High Performance Power Quality and Transient Recorder Meter KEY BENEFITS APPLICATIONS FEATURES
Multilin EPM 9900 ADVANCED POWER QUALITY METER High Performance Power Quality and Transient Recorder Meter KEY BENEFITS Auto-calibrating metrology means the meter maintains its accuracy over temperature
PT-7728/7828 Quick Installation Guide
PT-7728/7828 Quick Installation Guide Moxa PowerTrans Switch Edition 9.0, April 2017 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777
Scout-S Station Controller
Scout-S Station Controller Substation Automation Scout-S Station Controller The Scout-S Station Controller is a SCADA enabled remote terminal unit (RTU) with a data concentrator, event reporter, and built-in
Features and Benefits. Certifications
iopac 8600 Series Rugged modular programmable controllers Features and Benefits Modular CPU/power/backplane design that supports 85M/86M modules Tag-centric design with ready-to-run services Supports C/C++
Smart. Simple. Reliable. 600mm 1,100mm 600mm ( ft.) Weight 80 kg (176.4 lb.) [1] Protection Rating Ground-Mounted, Wall-Mounted, Rack-Mounted
![Smart. Simple. Reliable. 600mm 1,100mm 600mm ( ft.) Weight 80 kg (176.4 lb.) [1] Protection Rating Ground-Mounted, Wall-Mounted, Rack-Mounted](/thumbs/93/113353328.jpg "Smart. Simple. Reliable. 600mm 1,100mm 600mm ( ft.) Weight 80 kg (176.4 lb.) [1] Protection Rating Ground-Mounted, Wall-Mounted, Rack-Mounted")
ACU2000 Series ACU2000 ( Array Controller Unit) is a powerful integration of PV array communication and other smart functions. built-in Anti-PID module built-in (optional) Multiple communication interfaces
Installing and Upgrading Internal Modules and FRUs
Installing and Upgrading Internal Modules and FRUs, page 1 This document describes how to install and upgrade internal modules and field replaceable units (FRUs) in the Cisco 1100 Series Integrated Services
Chassis & Power Supplies Chassis
Chassis & Power Supplies Chassis Patented U.S.# 7,142,414 3RU Active Chassis Passive Version Rugged 3RU design Can accommodate up to 24 single-width passive modules (4, 6, 8, dual 4-way, triple 2-way splitter/combiners
Intech Micro 2300-A8VI analogue input station MODBUS RTU slave application supplementary manual.
Intech Micro 2300-A8VI analogue input station MODBUS RTU slave application supplementary manual. MODBUS supplementary manual to the 2300-A8VI Installation Guide. The 2300 series stations are designed to
Setup Instructions. This manual is only valid for A12B Chargers equipped with the following: S2A-225C card with software version P225C0630
La Marche Manufacturing Company www.lamarchemfg.com DNP 3.0 Serial (RS232/RS485) and Ethernet (TCP/IP) or Fiber SCADA Interface for A12B Chargers Option 21P Option 57T Option 57U Setup Instructions This
SE5908A Series SE5916A Series. 8 or 16-Port IEC Certified Industrial Rack-Mount Secure Serial Device Server FEATURE HIGHLIGHTS
SE5908A Series SE5916A Series 8 or 16-Port IEC61850- Certified Industrial Rack-Mount Secure Serial Device Server FEATURE HIGHLIGHTS Remotely monitor, manage, and control industrial field devices IEC61850-
String Inverter (SUN2000-8/12KTL)
String Inverter (SUN2000-8/12KTL) 2 MPPTs for versatile adaptions to different module types or quantities built up with different alignments 4 strings intelligent monitoring and 80% time saving for fault
Remote communication options include IEC Ethernet communications or Modbus (RS485).
2019 The MELPRO D series relay is suitable for feeder protection, motor protection and transformer protection applications. The relay offers multiple step time grading for over-current protection co-ordination.
NovaTech Orion I/O Overview
NovaTech Orion I/O 2 NOVATECH ORION I/O 3 NovaTech Orion I/O Overview NovaTech Orion I/O is an extension of the family of OrionLX Automation Platforms for substation automation and incorporates the same
Product names mentioned in this manual may be trademarks or registered trademarks of those products and are hereby acknowledged.
FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
8600 RTU Serial Port Status Cable Assembly for PCM v1.8 25x86 LP Drawings
8600 RTU Serial Port Status Cable Assembly for PCM-4862 1 v1.8 25x86 LP Drawings 8600 RTU Serial Port Status Cable Assembly for PCA-6135L 2 v1.8 25x86 LP Drawings 2572 RS-232 Status Board Connection 3
DA-682A-DPP Series Quick Installation Guide
DA-682A-DPP Series Quick Installation Guide x86 Rackmount Embedded Computers Edition 1.0, March 2016 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872
RTU modules Create your infrastructures with peace of mind!
W@de RTU modules Create your infrastructures with peace of mind! Make the most of your energy SM W@de (Water @pplications & Distributed Equipment) Compactness or modularity evolved to suit your applications
Supported Hardware Components
This chapter contains information about the supported hardware components on the Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router, and contains the following sections: Supported EPAs, page 1 Supported
iologik E2200 Series Smart Ethernet remote I/O with Click&GO Logic Introduction Remote I/O PC-Free Alarm and Control Intelligence
iologik E2200 Series Smart Ethernet remote I/O with Click&GO Logic Active communication with patented MX-AOPC UA Server and Active OPC server Smart alarm management with email, SNMP traps, TCP, UDP Save
GigaVUE-2404 // Data Sheet
Mgmt Console M/S Rdy 10/100/1000 PORTS (SFP) G1 G2 G3 G4 G1 G2 G3 G4 1 1 2 2 3 3 4 5 4 5 6 6 7 7 8 8 SLOT 2 PORTS 9 16 SLOT 1 PORTS G1-G4 PORTS 1-8 SLOT 3 PORTS 17 24 PS ALARM CUTOFF UP WHEN INSTALLED
Series 2000 Chassis. Applications
Series 2000 Chassis The APCON IntellaPat c h family of physical layer switches enables cost-saving management at Layer 1, the foundation of every enterprise network or interoperability test lab. Wire-once
INDEX. Analog Board Boot and Voltage Test 2 Testing Input Channels 3 Testing Output Channels 4
INDEX Analog Board Boot and Voltage Test 2 Testing Input Channels 3 Testing Output Channels 4 Digital Board Boot and Voltage Test 5 Testing Input Channels 6 Testing Output Channels 7 Display Testing 8
Getting Started With SEL-3555 RTAC
Getting Started With SEL-3555 RTAC What You Will Need Required Items: SEL-3555 RTAC Microsoft Windows PC a ACSELERATOR RTAC SEL-5033 Software CD Power cable(s) Ethernet cable 1/8-in slotted screwdriver
SEL-2440 Discrete Programmable Automation Controller
Discrete Programmable Automation Controller Complete System for Control and Monitoring Rack Panel Surface DIN Rail 32 Inputs 16 Outputs 4 Ports (Standard) Major Features and Benefits Fast and Powerful
TELCO. Tomi Männikkö/HW Architect, Datacenter R&D/ Nokia
TELCO EDGE SERVER AND CHASSIS Tomi Männikkö/HW Architect, Datacenter R&D/ Nokia Open edge chassis overview Key specifications 3U, 19 mountable (EIA-310 compatible) 130.6 x 440 x 430 mm (H x W x D) 1U and
F2238A and F2245A Fiber-Optic EIA-530/MIL-STD Modem Technical Manual
F2238A and F2245A Fiber-Optic EIA-530/MIL-STD-188-114 Modem Technical Manual Revision C October 2013 VERSITRON, Inc. 83 Albe Drive / Suite C Newark, DE 19702 www.versitron.com PROPRIETARY DATA All data
Installation and Wiring
Wiring 2 2 Plan for Safety Safety Techniques WARNING: Providing a safe operating environment for personnel and equipment is your responsibility and should be your primary goal during system planning and
Relion 615 series Transformer Protection and Control RET615 Ver. 2.0 Technical Presentation
Relion 615 series Transformer Protection and Control RET615 Ver. 2.0 Technical Presentation Distribution Automation May 13, 2010 1MRS756901 A Slide 1 Content RET615 Technical Presentation highlights May
iologik E1200 Series Ethernet remote I/O with 2-port Ethernet switch Introduction Remote I/O
iologik E1200 Series Ethernet remote I/O with 2-port Ethernet switch Active communication with patented MX-AOPC UA Server and Active OPC Server 2 switched Ethernet ports for daisy-chain topologies Easy
QUALITROL QTMS Transformer Monitoring System
QUALITROL QTMS Transformer System Providing the Missing Piece in Your Condition Based Platform Modular design; full customization of monitoring parameters to meet specification Reduce installation and
iologik 4000 Series Modular remote I/O Introduction iologik E4200 Specifications Remote I/O Slice Form Factor and Flexible I/O Variety
iologik 4000 Series Modular remote I/O I/O expansion without a backplane Supports SNMPv1/v2c Active communications with MX-AOPC UA Server Easy configuration with Modular ioadmin utility Friendly configuration
I-7520: RS-232 to RS-485. Input: RS-232 protocol Output:RS-485/RS-422 Speed: Self Tuner 'inside, auto switching baud rate, 300~ BPS
I-7520 RS-232 to RS-485 Converter I-7510 RS-485 Repeater RS-232 RS-485 I-7000 SERIES Common Specifications Isolation voltage: 3000VDC Speed: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115000 Dual watchdog
SEL-751A Feeder Protection Relay
SEL-751A Feeder Protection Relay Major Features and Benefits The SEL-751A Feeder Protection Relay provides an exceptional combination of protection, monitoring, control, and communication in an industrial
Power Patch Panel. Your head end solution for media conversion & PoE extension
Your head end solution for media conversion & PoE extension PRODUCT OVERVIEW Power Patch Panel NO MORE 90 METER LIMITS! Drive PoE up to 4750 meters from the head end of your network PoE powered devices
MONITORING AND CONTROL REQUIREMENTS FOR DISTRIBUTED GENERATION FACILITIES
MONITORING AND CONTROL REQUIREMENTS FOR DISTRIBUTED GENERATION FACILITIES 1. Introduction Real time monitoring and control is necessary to ensure public and employee safety and to protect the integrity