EE-SX470/471/472/473/474/670/671/672/673/674(P)

Transcription

1 R Photomicrosensor with 50 ma (PNP) or 100 ma (NPN) Switching Capacity that can be Built into Equipment Standard, -shaped, T-shaped, and close mounting models available Easy to maintain, plugs into Connector cordset EE-1006 Models available with ight- or ight-/dark- output configurations Response frequency as high as 1 kz Easy operation monitoring with bright ED Wide operating voltage range (5 to 4 VDC) makes smooth connection of the photomicrosensor with TTs, relays, and programmable controllers (PC) possible Ordering Information Appearance Sensing method Slot width Slot depth configuration Weight Part number Standard Slot 5mm 9mm ight- Approx. EE-SX g EE-SX470P ight-/dark- EE-SX670 (See note) EE-SX670P -shaped ight- Approx. EE-SX g EE-SX471P ight-/dark- EE-SX671 (See note) EE-SX671P T-shaped ight- Approx. EE-SX47.4 g EE-SX47P ight-/dark- EE-SX67 (See note) EE-SX67P Close-mounting ight- Approx. EE-SX473.3 g EE-SX473P ight-/dark- EE-SX673 (See note) EE-SX673P Close-mounting ight- Approx. EE-SX g EE-SX474P ight-/dark- EE-SX674 EE-SX674P The EE-SX67j series models can be used as ight- models when the terminal and positive (+) terminal are short-circuited. To use them as Dark- models do not short-circuit these terminals. Connector EE can be used for ight- operation.

2 J ACCESSORIES Name Solder connector Connector with m cable Connector holder for EE-1006 Part number EE-1001 EE-1006 EE-1006A Specifications J RATINGS Item Standard -shaped T-shaped Close-mounting type Supply voltage Current consumption Standard reference object Differential distance Control output Indicator (See note 1.) NPN output PNP output Without detecting object With detecting object Response frequency (See note.) ight source Receiver Connecting method EE-SX470 EE-SX670 EE-SX470P EE-SX670P EE-SX471 EE-SX671 EE-SX471P EE-SX671P 5to4VDC±10%, ripple (p-p): 10% max. NPN models: 35 ma max., PNP models: 30 ma max. Opaque: 0.8 x mm 0.05 mm EE-SX47 EE-SX67 EE-SX47P EE-SX67P EE-SX473, EE-SX474 EE-SX673, EE-SX674 EE-SX473P, EE-SX474P EE-SX673P, EE-SX474P NPN open collector output models: At 5 to 4 VDC: 100 ma load current (l c ) with a residual voltage of 0.8 V max. When driving TT: 40 ma load current (l c ) with a residual voltage of 0.4 V max. PNP open collector output models: At 5 to 4 VDC: 50 ma load current (l c ) with a residual voltage of 1.3 V max. 1 kz max. (3 kz typ.) GaAs infrared ED with a peak wavelength of 940 nm Si photo with a sensing wavelength of 850 nm max. EE-1001/1006 Connectors; soldering terminals/cordset 1. The is GaP red ED (peak emission wavelength: 690 nm).. The response frequency was measured by detecting the following disks rotating. 1mm.1 mm 1mm t=0.mm Disk

3 J CARACTERISTICS Ambient illumination (See note 1.) Fluorescent light: 1,000 l xmax. Ambient temperature Operating -5 Cto55 C (-13 F to 131 F) Storage Ambient humidity Operating 5% to 85% Vibration resistance Shock resistance Soldering heat resistance (See note.) Degree of protection Storage 5% to 95% -30 C to80 C (- F to 176 F) Destruction: 0 to,000 z, (with a peak acceleration of 10 G), 1.5-mm double amplitude for hrs (with 4-minute cycles) each in X, Y, and Z directions Destruction: 500 m/s (approx. 50G) for 3 times each in X, Y, and Z directions 60 ±5 C when the portion between the tip of the terminals and the position 1.5 mm from the terminal base is dipped into the solder for 10±1 seconds IEC 6059, IP50 Materials Case Polybutylene teraphthalate (PBT) Cover Emitter/Receiver Polycarbonate (PC) Polycarbonate (PC) 1. The ambient luminance is measured on the surface of the receiver.. This conforms to MI-STD Engineering Data J SENSING POSITI CARACTERISTICS (TYPICA) Tr Dark- mode Tr Dark- mode d d Tr Distance d (mm) Tr Distance d (mm) J REPEATED SENSING POSITI CARACTERISTICS (TYPICA) level Distance d (mm) No. of repetitions: 0 at V cc =1V nd1 = 0.00 mm nd = mm nd3 = mm nd4 = 0.0 mm nd5 = 0.04 mm 3

4 configuration NPN output Model EE-SX670 EE-SX671 EE-SX67 EE-SX673 EE-SX674 operation ight- Dark- Timing charts (When terminals and oad 1 (relay) oad oad 1 (relay) oad are short circuited circuit (red) oad 1 (relay) Main circuit Q I C 5to4VDC oad 0V (See Note.) R When using a voltage output, always insert a resistor in R. PNP output EE-SX470 EE-SX471 EE-SX47 EE-SX473 EE-SX474 EE-SX670P EE-SX671P EE-SX67P EE-SX673P EE-SX674P ight- ight- Dark- oad 1 (relay) oad oad (relay) Voltage output (When terminals and oad 1 (relay) oad are short circuited) (red) Main circuit Q 5to4VDC oad 1 (relay) I C oad 0V When using a voltage output, always insert a resistor in R. (red) Main circuit I C 5to4VDC oad R (See Note.) (See Note.) R 0V When using a voltage output, always insert a resistor in R. EE-SX470P EE-SX471P EE-SX47P EE-SX473P EE-SX474P ight- oad (relay) Voltage output (red) Main circuit I C 5to4VDC oad R 0V When using a voltage output, always insert a resistor in R. (See Note.) 4

5 Dimensions Unit: mm (inch) J EE-SX470(P), EE-SX670(P) 6.95 () 5.4 (1.00) 19 (5) Two, 3. dia. holes 9 Optical axis 13. (0.5) 5.5(0.) Four, R (5) (0.5) (0.53) (0.0) 1 (0.54) Two, dia. holes Indicator window 0.3 (0.01) (0.08) (SeeNote.) PUT Terminal needs no connection for all EE-SX47j series sensors. J EE-SX471(P), EE-SX671(P) (1.03) 19.0 (5) Four, R 3.(0.13) 14.5 (0.57) (0.33) 7. (0.8) 3.6 (0.14) (0.1) (0.53) 5.0 (0.0) (0.53) 19.0 (5) Four, R1.0 Indicator window Optical axis Two, 3. dia. holes.1(0.08) 0.3(0.01) (0.0) (0.5) 6.95 () (0.08) 15.5 (0.61) 7. (0.8) (SeeNote.) PUT Terminal needs no connection for all EE-SX47j series sensors. 5

6 J EE-SX47(P), EE-SX67(P) 13.7 (0.54) 3.0 (0.1) 6.0 (1.0) 6.4 (0.5) 1.6 (0.50) (SeeNote.) PUT 13.4 (0.53) (0.0).9 0. (0.11) (0.01) Optical axis 0.1 (0.004) (0.08) (0.004) 4.3 (0.17) Indicator window operation (back). (0.87) 6.3 (0.5) 4-R (0.01) 4-R (5) Terminal needs no connection for all EE-SX47j series sensors. J EE-SX473(P), EE-SX673(P) 6.3 (0.5) 1.8 (0.50) 3.5(0.14) 6.65 (0.6) Two, R1 9 7 (0.8) 13.4 (0.53) 5 (0.0) Two, 3. dia. holes Optical axis 0.8 (0.08) (SeeNote.) PUT. (0.87).8(0.11) 4.9(0.19) 14.4 (0.57) Indicator window 0.3 (0.01) Terminal needs no connection for all EE-SX47j series sensors. 6

7 J EE-SX474(P), EE-SX674(P) --R1 7 (0.8) 7 (0.8) Two 3.5 dia holes ight Indicator 1.5 (0.85) 3 (0.1) (SeeNote.) PUT 9.3 (0.37).9(0.11) (0.0) 13.6 (0.54) Optical Axis (0.08) (0.01) 0.6 (0.0). (0.09) (0.004) Optical Axis Mark (0.61) Terminal needs no connection for all EE-SX47j series sensors. J EE-1001 SODER CNECTOR J EE-SX67j(P) WIT EE-1001 CNECTOR 13.0 ± (0.16) 0.6 (0.0). (0.87) 10.8 (0.43) (0.43) 6.0.9±1 J EE-1006 CNECTOR WIT CABE 11.8 (0.46) 0.6 (0.0) 5.3 (0.1) 1 (0.64) 0 (9),000 (78.74) 5 (0.98) 15 (0.59) -- IEC Colors Brown (Red) Pink (Yellow) Black (White) Blue (Black) VCC PUT GND (O V) Older standard colors are shown in parentheses. Connector comes with a -m attached cable. 7

8 J EE-1006A CNECTOR ODER 10. (0.40) 3 (0.1) 19.4 (6) 1.9 (0.86) (0.99) (0.13) (5) 1 (0.47) 3.4 (0.13).1(0.08) 3(0.1) 15 (0.59) 3.6 (0.14) R3 Four, R Four, R (0.) 1. (0.05) (R1) (0.08) Precautions Refer to the the Technical Information Section for general precautions. The sensing window is made of a polycarbonate resin which withstands chloride solvents and strong acids but is soluble in strong alkali, aromatic hydrocarbons, and aliphatic hydrocarbonate chloride solvents. The casing material uses a PBT resin which withstands chemicals and oil but is soluble in strong acid or alkali solvents. The temperature of the terminals at the time of soldering must not exceed the following: Item Temperature Permissible time Remarks Dip 60 C 10 sec The portion between the base of the terminals and Iron 350 C 3sec the position 1.5 mm from the terminal base must not be soldered. The terminal base uses a polycarbonate resin, which could be deformed by excessive soldering heat. NOTE: DIMENSIS SOWN ARE IN MIIMETERS. To convert millimeters to inches divide by 5.4. R OMR EECTRICS C OneEastCommerceDrive Schaumburg, I OMR OMR -INE Global -- USA -- Canada -- OMR CANADA, INC. 885 Milner Avenue Toronto, Ontario M1B 5V Cat. No. GC APMS-1 09/0 Specifications subject to change without notice. Printed in U.S.A.