IPaCS Equipment Overview Integrated Power Center (IPC) Integrated Power Center 2 (IPC2 ) 10-4

Transcription

1 Download Section 10 PDF Table of Contents Section 10 Integrated Power and Control Solutions (IPaCS) Equipment IPaCS Equipment Overview 102 Modular Panelboard System (MPS) 103 Integrated Power Center (IPC) IPC2 104 IPC2 Transformer Combo 104 Standard Transformer Combo Merchandise Configurations 105 Integrated Equipment Sample Lineups 106 MPS, see page 103 IPC, see page 103 IPC2, see page Schneider Electric 101 Courtesy of Steven Engineering, Inc.230 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) www.stevenengineering.com

2 IPaCS Equipment Overview Class 2200 / Refer to Documents 2230DB0601, 2010CT0001 and 2735CT0001 Integrated Power and Control Solutions (IPaCS TM ) Equipment Overview FOR CURRENT IORMATION The Square D family of integrated equipment combines electrical distribution equipment, building controls and automation into a single factoryassembled and prewired enclosure. Our innovative, costeffective, integrated solutions save valuable floor space, shorten construction cycle times and reduce installation and material handling costs. Integrated lineups are tailored to customer specifications and can be customized to include third party components, such as building management automation and controls. Modular Panelboard System (MPS) PreEngineered Solution The Modular Panelboard System is tailored to customer specifications and may include panels, transformers and lighting control. An MPS is applicable when thirdparty building control systems are not required. Special interiors are available such as column width and Powerlink. Options may include power and control cable wiring, contactors, terminal blocks, TVSS and equipment space. MPS sections are 86 in. (2184 mm) high x 9.5 in. (241 mm) deep. Widths vary depending upon customer specifications. Integrated Power Center (IPC) CustomDesigned Solution For more complex designs, the Integrated Power Center allows for the integration of a variety of controls, including electrical distribution equipment, HVAC controls, lighting controls, power quality and power conditioning products, surge suppression and building management systems. As with all integrated solutions, they meet applicable codes and standards and are shipped to the site fullyassembled, completely pretested and ready to install. IPC sections are 84 in. (2134 mm) high x in. (260 mm) deep. Widths vary depending upon customer specifications. The newest addition to the family of integrated solutions, the provides maximum flexibility to meet customers specifications. Features include those found in the IPC and are provided in a freestanding enclosure that can be front and rear aligned when transformers are included. Enclosure options include NEMA 1, NEMA 1 with driphood and NEMA 3R. IPC2 Transformer Combo Ideally suited for projects having both 480Y/277 V and 208Y/120 V requirements. Available as a standalone solution or can be incorporated into an MPS, IPC or IPC2 lineup. The 42 in. (1067 mm) wide x 24 in. (610 mm) deep footprint will decrease space requirements by 40% or more. Additional savings are realized on installation, material costs and material handling, shown in the table below. Table 10.1: IPC2 Transformer Combo Savings Realized StickBuilt Transformer Combo Savings Realized Estimated Installation Hours Materials Saved Associated pipe, wire and fittings Associated pipe, wire and fittings No. of Pieces Handled The IPC2 Transformer Combo has been recognized by the electrical industry by winning the following awards: 2006 INNOVATION Award given by the Electrical Contracting Products magazine Product of the Year Gold Medal Award given by the Consulting/Specifying Engineer magazine Schneider Electric Courtesy of Steven Engineering, Inc.230 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) www.stevenengineering.com

3 FOR CURRENT IORMATION IPaCS Equipment Modular Panelboard System and Integrated Power Center Class 2210 and Class 2220 / Refer to Documents 2010CT0001 and 2735CT0001 Modular Panelboard System (MPS) The preengineered MPS consists of a mix of, and ILine interiors, transformers and lighting control. It is applicable when thirdparty building control systems are not required. Special interiors are available such as column width and Powerlink. Options include power and control cable wiring, contactors, terminal blocks, TVSS and equipment space. Equipment space options include factoryinstalled lighting contactors in three configurations: 1. Unwired: Mounted in cell only 2. Line side wired: Line side of each pole is wired to a branch circuit breaker 3. Fully wired: Line side of each pole is wired to a branch circuit breaker, load side of each pole wired to a terminal block Built on a panelboard platform, MPS sections are NEMA 1 rated and meet the requirements of UL 67. Individual sections are 86 in. (2184 mm) high x 9.5 in. (241 mm) deep; widths vary from 10 in. (254 mm) to 44 in. (1118 mm). Layout/Lead Time/Pricing: Contact your nearest field sales office. Modular Panelboard System MPS Interior Shipping: Integrated equipment lineups are shipped as a factoryassembled, prewired system. Customers may specify single or multiple section shipping splits (some limitations apply). In addition, lineups may be ordered with or without factoryinstalled power cables. Integrated Power Center (IPC) The customdesigned Integrated Power Center allows for greater design flexibility with the integration of a variety of controls, including: Electrical distribution Power quality Building automation Surge suppression Lighting controls HVAC controls Integrated Power Centers are NEMA 1 rated and meet the requirements of UL 891. As with all integrated solutions, IPCs are shipped to the site fullyassembled, completely pretested and ready to install. IPC sections are 84 in. (2134 mm) high x in. (260 mm) deep; widths vary depending upon customer specifications. Individual IPC configurations include, or ILine panel sections in full height, stacked or sidebyside arrangements. In addition, combination sections combine electrical distribution panels with equipment space for building controls. Equipment space options include factoryinstalled lighting contactors in three configurations: 1. Unwired: Mounted in cell only 2. Line side wired: Line side of each pole is wired to a branch circuit breaker 3. Fully wired: Line side of each pole is wired to a branch circuit breaker, load side of each pole wired to a terminal block Layout/Lead Time/Pricing: Contact your nearest field sales office. Integrated Power Center Shipping: Integrated equipment lineups are shipped as a factoryassembled, prewired system. Customers may specify single or multiple section shipping splits (some limitations apply). In addition, lineups may be ordered with or without factoryinstalled power cables. IPC Interior 2007 Schneider Electric 103 Courtesy of Steven Engineering, Inc.230 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) www.stevenengineering.com

4 IPaCS Equipment Class 2230 / Refer to Documents 2230HO0601 and 2230DB FOR CURRENT IORMATION Integrated Power Center 2 The IPC2 provides maximum design flexibility. In addition to the features found in the Integrated Power Center, IPC2 lineups are freestanding enclosures that can be front and rearaligned when transformers are included. NEMA 1, NEMA 1 with driphood and NEMA 3R enclosure options Freestanding sections that can be closecoupled to QED switchboards UL 891 Deadfront switchboard construction Seismically qualified to meet IBC and ASCE 7 Equipment space options include factoryinstalled lighting contactors in three configurations: 1. Unwired: Mounted in cell only 2. Line side wired: Line side of each pole is wired to a branch circuit breaker 3. Fully wired: Line side of each pole is wired to a branch circuit breaker, load side of each pole wired to a terminal block Layout/Lead Time/Pricing: Contact your nearest field sales office. Shipping: Integrated equipment lineups are shipped as a factoryassembled, prewired system. Customers may specify single or multiple section shipping splits (some limitations apply). In addition, lineups may be ordered with or without factoryinstalled power cables. IPC2 Transformer Combo A member of the IPC2 family, the Transformer Combo has been recognized wide for its innovative design. It integrates panelboards, individuallymounted circuit breakers or lighting contactors with a drytype transformer into one factoryassembled and prewired solution. All are housed in a spacesaving 42 in. (1067 mm) wide x 91.5 in. (2324 mm) high x 24 in. (610 mm) deep enclosure. The Transformer Combo is ideally suited for projects having both 480Y/277 V and 208Y/120 V requirements and is applicable where panels and a transformer are in close proximity. As a standalone solution, the Transformer Combo provides the flexibility to enter and/or exit the section from either the top or bottom. It can also be incorporated into an MPS, IPC or IPC2 lineup. Transformer Combo Schneider Electric Courtesy of Steven Engineering, Inc.230 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) www.stevenengineering.com

5 XXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXX FOR CURRENT IORMATION IPaCS Equipment Class 2230 / Refer to Documents 2230HO0601 and 2230DB0601 Standard Transformer Combo Merchandise Configurations The IPC2 Transformer Combo is available in four standard merchandise configurations, as shown below (additional configurations are available; contact your nearest field sales office). Table 10.2: Catalog No. IPC2TC1EE IPC2TC1EE IPC2TC2EE IPC2TC3EE IPC2TC4EE NOTE: All sections can be fed from the top or bottom. Standard Transformer Combo Configuration Specifications Panel Panel Transformer 480Y/277 3Ø4W 208Y/120 V 3Ø4W 480 V 208Y/120 V 3Ø 225/3 MB 18k AIC 225/3 MB 10k AIC 1 125/3 (Transformer) 20 20/1 Branch Breakers 20 20/1 Branch Breakers 22 1PSO 150 C Temp Rise 19 1PSO Copper Bus/Ground Bus Aluminum Windings Copper Bus/Ground Bus 6 2.5% Taps; 2+ 4 SUSE Catalog No. IPC2TC2EE Panel Panel Transformer 480Y/277 3Ø4W 208Y/120 V 3Ø4W 480 V 208Y/120 V 3Ø 400 A MLO 18k AIC 225/3 MB 10k AIC 1 125/3 (Transformer) 20 20/1 Branch Breakers 20 20/1 Branch Breakers 22 1PSO 150 C Temp Rise 19 1PSO Copper Bus/Ground Bus Aluminum Windings Copper Bus/Ground Bus 6 2.5% Taps; 2+ 4 SUSE Catalog No. IPC2TC3EE (X) Transformer Primary Breaker (P) Panel Main Breaker Panel Transformer 175 A 3P 480 V 35k AIC 400 A 3P 240 V 10k AIC 208Y/120 V 3Ø4W 480 V 208Y/120 V 3Ø SUSE 400 A MLO 10k AIC kva 20 20/1 Branch Breakers 22 1PSO 150 C Temp Rise Copper Bus/Ground Bus Aluminum Windings 6 2.5% Taps; 2+ 4 Catalog No. IPC2TC4EE Panel Panel Transformer 208Y/120 V 3Ø4W 208Y/120 V 3Ø4W 480 V 208Y/120 V 3Ø 225/3 MB 10k AIC 225 A MLO 10k AIC 20 20/1 Branch Breakers 20 20/1 Branch Breakers 22 1PSO 22 1PSO 150 C Temp Rise Copper Bus/Ground Bus Copper Bus/Ground Bus 6 2.5% Taps; 2+ 4 FT Lugs 2007 Schneider Electric 105 Courtesy of Steven Engineering, Inc.230 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) www.stevenengineering.com

6 IPaCS Equipment Integrated Equipment Sample Lineups Sample Lineups Class 2200 / Refer to Documents 2230DB0601 and 2010CT FOR CURRENT IORMATION ILine ILINE ILine Modular Panelboard System 208Y/120 V 1200 Amp ILine Equip. Space Modular Panelboard System with IPC2 Transformer Combo Equipment Space Equipment Space 1200 Amp ILine Integrated Power Center 208Y/120 V Integrated Power Center with IPC2 Transformer Combo 80Y/227 V System and 208Y/120 V System 1200 Amp ILine Stacked Transformer Assembly 225 kva 800 Amp ILine ILine Integrated Power Center with Stacked Transformer IPC2 Transformer Combo and Integrated Power Center Main Circuit Breaker ILine ILine Switchboard and IPC2 Transformer Combo Schneider Electric Courtesy of Steven Engineering, Inc.230 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) www.stevenengineering.com