MCG SURGE. Data Line Protection - Vol. 3 PROTECTION. DLP-C6-DIN DLP-C6-DIN DLP-C6-DIN. MCG Surge Protection

Size: px

Start display at page:

Download "MCG SURGE. Data Line Protection - Vol. 3 PROTECTION. DLP-C6-DIN DLP-C6-DIN DLP-C6-DIN. MCG Surge Protection"

Moris Reynolds
5 years ago
Views:

1 Data Line Protection - Vol. MCG DLP-C-DIN DLP-C-DIN DLP-C-DIN SURGE PROTECTION Registered to ISO 001 : 00 Certificate No. 000 QM0

1 1 1 1 1 1 1 1 1 1 1 1 1 T r ansie nt Pr o t e ctio n Since 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 T r ansie nt Pr o t e ctio n Since 1 1 Model 1-CCTV Surgefree Protected Panel DATA LINE PROTECTION

Model 1 SurgeFree Protected Panel Instrumentation DLP-D-Sub Series RS- RS- RS- RS-0 Parallel ISDN T1 DDS Dial-Up Modem Fax DSL Modems/Routers/WAP Category RJ- RJ- COAX LINE DLP-.0 DLP-.0 DLP-.1 DLP-.

2 T r ansie nt Pr o t e ctio n Since T r ansie nt Pr o t e ctio n Since 1 1 Model 1-CCTV Surgefree Protected Panel DATA LINE PROTECTION APPLICATIONS DLP-. DLP-.-.V Network/Server Category BASE-T 0 BASE-T 00 BASE-T PoE Mode A & B DLP-PoE DLP-PoE DLP-C-DIN 1/1/// 1- Port Cat. Model 1 SurgeFree Protected Panel Instrumentation DLP-D-Sub Series RS- RS- RS- RS-0 Parallel ISDN T1 DDS Dial-Up Modem Fax DSL Modems/Routers/WAP Category RJ- RJ- COAX LINE DLP-.0 DLP-.0 DLP-.1 DLP-.1 DLP-T, B & G DIN Series DLP-.0 Data Line Protector DLP-.0-V DLP-PoE LOAD 1/1 1 & 1 Port Cat. Rackmount SurgeFree Protected Panel DLP-PoE DLP-. CCTV/DVR/Video CCTV LINE Data Line Protector DLP-.-V LOAD 1-CCTV Rackmount Note: For hardwired protectors, visit our website at

3 Data Line Selection Guide Select model by application, protocol and connectors. MODEL Application Protocol PINS PROTECTED Connectors Standard Clamp Voltage dlp-.-.v Category Protection BASE-T/0BASE-T/00BASE-T Wires. volts dlp-c-din* Category Protection BASE-T/0BASE-T/ 00BASE-T Wires. volts dlp-poe-0v-a Power Over Ethernet PoE Mode A Wires RJ / 0 volts dlp-poe-0v-b Power Over Ethernet PoE Mode B Wires F/F Pins 1-, :. volts Pins,, & : 0 volts dlp-.-. RS/RS/RS Protection RS/RS/RS All pins DB M/F. volts DLP-.-1V Protection All pins DB M/F 1 volts DLP-.1-.V RS/RS/RS Protection RS/RS/RS All 1 pins DB1 M/F. volts DLP-.1-1V Protection All 1 pins DB1 M/F 1.volts DLP-.-.V RS/RS/RS/RS0 Protection RS/RS/RS/RS0 All pins DB M/F. volts DLP-.-1V Protection All pins DB M/F 1 volts DLP-.-1V-W Protection Pins (1),,,0 DB M/F 1 volts DLP-.-1V-W Protection Pins (1)-,0 DB M/F 1 volts DLP-DB-ENET Parallel Protection Parallel All PINS DB M/F. volts DLP-.0-.V-W RS/RS Protection RS/RS Wire, CTR pins RJ/RJ F/F. volts DLP-.0-.V-W RS/RS Protection RS/RS Wire, all pins RJ/RJ F/F. volts DLP-.0-0V-W DSL Protection DSL Wire, all pins RJ/RJ F/F 0 volts dlp-.0-0v-w Dial-Up/Modem/Fax Protection Dial-Up/Modem/Fax Wire, CTR pins rj/rj f/f 0 volts dlp-.0-0v-w Dial-Up/Modem/Fax Protection Dial-Up/Modem/Fax Wire, CTR pins rj/rj f/f 0 volts dlp-.0-0v-w Dial-Up/Modem/Fax Protection Dial-Up/Modem/Fax Wire, all pins rj/rj f/f 0 volts dlp-.1-1v-w Protection Wire, CTR pins rj/rj f/f 1 volts dlp-.1-1v-w Protection Wire, all pins rj/rj f/f 1 volts dlp-.1-0v-w T1 Protection T1 Wire, all pins rj/rj f/f 0 volts dlp-.1-0v-w Dial-Up/Modem/Fax Protection Dial-Up/Modem/Fax Wire, all pins rj/rj f/f 0 volts DLP-.0 See data sheet see data sheet wire, all pins rj/rj f/f See Data Sheet Dlp-. See data Sheet See data sheet Wire, all pins rj/rj f/f see data sheet dlp-t-din * Protection Wire, all pins rj/rj f/f 1 volts dlp-b-din * ISDN/T1/DDS Protection ISDN/T1/DDS Wire, all pins rj/rj f/f 0 volts dlp-g-din * Dial-Up/Modem/Fax Protection Dial-Up/Modem/Fax Wire, CTR pins rj/rj f/f 0 volts dlp-.- BASE-T Protection BASE-T 1,, & F/F. volts dlp-.- BASE-T Protection BASE-T All pins F/F. volts 1 series 1 Port Rackmount see data sheet See data sheet 1 block to RJ See data sheet 1 series 1 port Rackmount see data sheet see data sheet Rj to RJ See data sheet 1 Series 1 Port Rackmount See data sheet See data sheet 1 Block to RJ See data sheet 1 Series 1 Port Rackmount See data sheet See data sheet RJ to RJ See data sheet Series Port Rackmount See data sheet See data sheet 1 Block to RJ See data sheet series Port Rackmount See data sheet See data sheet RJ to RJ See data sheet series Port Rackmount See data sheet See data sheet 1 Block to RJ See data sheet * Not UL Listed PAGE NO.

The protectors prevent costly downtime by protecting NICs (network interface cards) hubs and relays.

4 -00-A Data Line Pro tec tion DLP-. Cat Protection DLP-C-DIN Cat Protection DLP-.-.V The DLP-. series are high speed single port protectors designed to protect Category (Gigabit Ethernet) based protocols such as 00BASE-T, plus 0BASE-T and BASE-T systems. The protectors prevent costly downtime by protecting NICs (network interface cards) hubs and relays. Using the latest protection technologies, units are virtually invisible to the high speed data path until a surge occurs. The DLP-. reacts in nanoseconds causing the surge current to fl ow through the protector instead of the port. Installs in seconds. The DLP-C-DIN offers Category protection in a compact DIN rail mountable device. The unit protects equipment running 00BASE-T, as well as 0BASE-T and BASE-T. The device reacts in nanoseconds causing the surge current to flow through the protector instead of the port. At just under an inch wide, the device occupies minimal DIN rail real estate. Installation is plugand-play using RJ connectors, as the ground connection is made through the DIN rail. 1." (.) DLP-..V " (1) RJ or RJ M/M 0. (.).0 (.) 0." (.) 1. (1.) 0. (.) DIN MOUNT Connector: Protects: Enclosure: Peak Pulse Current: Std. Clamp Voltage: DLP-.-.V Wires ABS Plastic, Pearl White <.1 lb., (<.0kg) 0 AMPS, /00µs.V < ns ULB Listed 0-year warranty Connector: Protects: Enclosure: Peak Pulse Current: Std. Clamp Voltage: DLP-C-DIN* Wires ABS Plastic, Black <.0 lb., (<.0kg) 0 AMPS, /00µs.V < ns 0-year warranty * Not UL Listed 1 Burt Drive, Deer Park, New York, USA Telephone: (1) -1 Fax: (1) - Toll Free: , info1@mcgsurge.com

MCG s DLP-PoE series of protectors provide reliable, easy to install protection for equipment using the Power over Ethernet protocol.

5 -00-0A Data Line Pro tec tion DLP-.0 Protects Modems, Fax, Telco, T1, E1 /0 BASE-T Networks DLP-PoE Series Power over Ethernet DLP-PoE MCG s DLP-.0 surge protector is de signed to handle demanding Cat. applications. MCG s DLP-PoE series of protectors provide reliable, easy to install protection for equipment using the Power over Ethernet protocol. These single port protectors guard equipment from damage due to transient currents caused by differences in ground potential. Reacting in nanoseconds, the DLP-PoE series conducts surge currents away from sensitive equipment. Covers both Mode A and Mode B systems. Use the -A model for Mode A applications and the -B model for Mode B applications. Easy to install using RJ connectors. Single port applications such as local area networks are easi ly dam aged by tran sients caused by light ning and switch ing surg es. The DLP- se ries in stalls in min utes be tween the data line and the sen si tive equip ment to pro vide quick and de pend able pro tec tion for I/O ports. 1." (.) DLP-PoE " (1) RJ M/M Protection cir cuit ry au to mat i cal ly resets af ter the tran sient has passed. 0." (.).0" (1.) 1 AWG GND " () with # Fork Terminal I Peak: Attenuation: Connector: Clamp: Protected: Heavy Duty: Mounting: DLP-.0 00A, /0μs <1dB at 0MHz RJ (F/F),, 0, 00V <1ns Pins 1- Ipk=00A, /0us. x 1 x 1 x x mm <1 lb. (.kg) 0-Year Warranty ULB Listed Connector: Enclosure: Mode A Std. Clamp Voltage(s): 0 Volts Peak Pulse Current: (x00µs) < ns DLP-PoE-0V-A & DLP-PoE-0V-B ABS Plastic, Pearl White <.1 lb., (<.0kg) 0 Amps ULB Listed 0-year warranty Mode B Pins 1,, & :. Volts,, & : 0 Volts Pins 1,, & :,, & : 1 Burt Drive, Deer Park, New York, USA Telephone: (1) -1 Fax: (1) - Toll Free: , info1@mcgsurge.com

-00-A DLP-.0-.V-W The MCG D-Sub series protects equiment with D-Sub style connectors. Protects -pin, 1-pin, and -pin confi gurations.

The protector turns on instantly when an overvoltage occurs and limits it to a safe level. Quick, easy installation and compact size allow use in tight spaces. The MCG DLP-.

The protector turns on instantly when an overvoltage occurs and limits it to a safe level. The current is bypassed through the protector and away from sensitive equipment.

V DLP-.1-1V RS/RS/RS ALL 1 PINS. VOLTS DB DLP-.-.V DLP-.-1V RS/RS/RS/RS0 ALL PINS. VOLTS DB DLP-.-1V-W DLP-.-1V-W PINS (1),,,0 PINS (1) -, 0 DB DLP-DB-ENET PARALLEL ALL PINS. VOLTS RJ RJ DLP-.0-.

6 -00-A DLP-.0-.V-W The MCG D-Sub series protects equiment with D-Sub style connectors. Protects -pin, 1-pin, and -pin confi gurations. Common surges affecting these ports are caused by differences in ground potential at each end of the data line due to nearby lightning strikes. The protector turns on instantly when an overvoltage occurs and limits it to a safe level. Quick, easy installation and compact size allow use in tight spaces. The MCG DLP-.0 series protect communication ports using RJ connectors. These ports are affected by differences in ground potential at each end of the data line cable caused by nearby lightning strikes. The protector turns on instantly when an overvoltage occurs and limits it to a safe level. The current is bypassed through the protector and away from sensitive equipment. The protector automatically resets, ready for the next transient. Conn: Application Pins Protected Std. Clamp Voltage Peak Pulse Current /00µs DB DLP-.-. DLP-.-1V RS/RS/RS ALL PINS. VOLTS DB1 DLP-.1-.V DLP-.1-1V RS/RS/RS ALL 1 PINS. VOLTS DB DLP-.-.V DLP-.-1V RS/RS/RS/RS0 ALL PINS. VOLTS DB DLP-.-1V-W DLP-.-1V-W PINS (1),,,0 PINS (1) -, 0 DB DLP-DB-ENET PARALLEL ALL PINS. VOLTS RJ RJ DLP-.0-.V-W DLP-.0-.V-W RS/RS RS/RS WIRE, CTR PINS WIRE, ALL PINS. VOLTS. VOLTS RJ RJ RJ RJ DLP-.0-0V-W DLP-.0-0V-W DLP-.0-0V-W DLP-.0-0V-W DIAL-UP / MODEM / FAX DIAL-UP / MODEM / FAX DIAL-UP/ MODEM / FAX DSL WIRE, CTR PINS WIRE, CTR PINS WIRE, ALL PINS WIRE, ALL PINS 0 VOLTS 0 VOLTS 0 VOLTS 0 VOLTS Enclosure: ABS Plastic, Pearl White <.1 lb., (<.0kg) < ns ULA Listed ( 0V & 0V models), ULB Listed 0-year warranty 1 Burt Drive, Deer Park, New York, USA Telephone: (1) -1 Fax: (1) - Toll Free: , info1@mcgsurge.com

-00-A Data Line Pro tec tion DLP.1 Series /ISDN/T1 Dial-Up/Modem/Fax DLP-T, B & G Series ISDN/T1/DDS DLP-.1-1V-W 1." (.) The DLP-.

Employing the latest technologies in surge suppression, these devices are virtually invisible to the system.

1 is an economical solution to transient problems. Units install in minutes. DLP-.

Units install adjacent to the equipment on the same DIN rail or a nearby DIN rail and use less than one inch of rail space.

Installation is plug-and-play as the ground connection is made through the DIN rail bracket.

7 -00-A Data Line Pro tec tion DLP.1 Series /ISDN/T1 Dial-Up/Modem/Fax DLP-T, B & G Series ISDN/T1/DDS DLP-.1-1V-W 1." (.) The DLP-.1 series is designed to protect a wide range of applications that use an RJ style connector. Employing the latest technologies in surge suppression, these devices are virtually invisible to the system. Units react in nanoseconds to divert transient currents away from sensitive equipment. The DLP-.1 is an economical solution to transient problems. Units install in minutes. DLP-.1 " (1) RJ M/M These compact DIN rail mounted protectors guard DIN rail mounted equipment that use an RJ style connector. Units install adjacent to the equipment on the same DIN rail or a nearby DIN rail and use less than one inch of rail space. Unit reacts in nanoseconds and causes the surge current to safely flow through it instead of the euipment's port. Installation is plug-and-play as the ground connection is made through the DIN rail bracket. If the system uses a 1" equipment rack, consider the optional DIN rail mounting system. 0. (.).0 (.) 0." (.).0" (1.) 1 AWG GND " () with # Fork Terminal 1. (1.) 0. (.) DIN MOUNT Application Connectors Pins Protected Std. Clamp Voltage Peak Pulse Current /00µs DLP-.1-1V-W DLP-.1-1V-W DLP-.1-0V-W DLP-.1-0V-W T1 Dial Up/Modem/Fax wire, ctr pins wire, all Pins wire, all pins wire, all pins 0 VOLTS 0 VOLTS DLP-T-DIN* DLP-B-DIN* DLP-G-DIN* ISDN/T1/DDS (Fused) Dial Up (Fused) wire, all pins wire, all pins wire, ctr pins 0 VOLTS 0 VOLTS * Not UL Listed Enclosure: ABS Plastic <0.1lb., (<0.0kg) DIN Models <.0lb., (<.0kg) < ns ULA Listed ( 0V & 0V models), ULB Listed 0-year warranty 1 Burt Drive, Deer Park, New York, USA Telephone: (1) -1 Fax: (1) - Toll Free: , info1@mcgsurge.com

-00-A DLP-. BASE-T Protection DLP-. Protects Modems, Fax, Telco, T1, E1 /0 BASE-T Networks DLP-. LINE Data Line Protector DLP-.

Designed for use on BASE-T networks, the unit will prevent costly downtime of sensitive networks by protecting NIC (network interface cards) hubs and relays.

responds in nanoseconds to an overvoltage and instantly diverts harmful surge currents away from sensitive equipment. Units install in minutes. MCG s DLP-.

8 -00-A DLP-. BASE-T Protection DLP-. Protects Modems, Fax, Telco, T1, E1 /0 BASE-T Networks DLP-. LINE Data Line Protector DLP-.-V LOAD Reliable protection, easy to install and a compact package make the DLP-. an ideal protection choice. Designed for use on BASE-T networks, the unit will prevent costly downtime of sensitive networks by protecting NIC (network interface cards) hubs and relays. Units are virtually invisible to the network and will not affect data rates. The DLP-. responds in nanoseconds to an overvoltage and instantly diverts harmful surge currents away from sensitive equipment. Units install in minutes. MCG s DLP-. surge protector is de signed to handle demanding Cat. applications. Single port applications such as local area networks are eas i ly dam aged by tran sients caused by light ning and switch ing surg es. The DLP- se ries in stalls in min utes be tween the data line and the sen si tive equip ment to pro vide quick and de pend able pro tec tion for I/O ports. " (1) RJ M/M Protection cir cuit ry au to mat i cal ly resets af ter the tran sient has passed. 1." (.) DLP-. 0." (.).0" (1.) 1 AWG GND " () with # Fork Terminal Protects: Connector: Enclosure: Peak Pulse Current: Std. Clamp Voltage: DLP-.- DLP-.- 1,, & ALL PINS ABS Plastic, Pearl White <.1lbs., (<.0kg), /00µs. VOLTS < ns ULB Listed 0-year warranty I Peak: Attenuation: Connector: Clamp: Protected: Heavy Duty: Mounting: DLP-. 00A, /0μs <1dB at 0MHz RJ (F/F),, 0, 00V <1ns Pins 1- Ipk=00A, /0us. x 1 x 1 x x mm <1 lb. (.kg) ULB Listed 0 Years 1 Burt Drive, Deer Park, New York, USA Telephone: (1) -1 Fax: (1) - Toll Free: , info1@mcgsurge.com

9 1 Burt Drive, Deer Park, New York, USA Telephone: (1) -1 Fax: (1) - Toll Free: , info1@mcgsurge.com

-00- Data Line Protection 1 Series Rack Protector Twelve Port Protection 1 Series Rack Protector Sixteen Port Protection Unshielded twisted-pair cable used in networks is more susceptible to

Induced transients appear along the run of these cables, unfettered and ready to cause damage to downstream equipment.

10 -00- Data Line Protection 1 Series Rack Protector Twelve Port Protection 1 Series Rack Protector Sixteen Port Protection Unshielded twisted-pair cable used in networks is more susceptible to electrical noise than shielded cable. And, because the networks are frequently moved and changed, it s easy to lose track of where these cables run. Induced transients appear along the run of these cables, unfettered and ready to cause damage to downstream equipment. The 1 Series of 1 rack protectors guard routers, hubs, patch panels and other complex instrumentation from damage due to lightning and switching surges. Housed in a compact, one-unit design, the 1 Series offers twelve protected ports (front to back). These rack mount protectors offer a choice of heavy duty (1H, protects wires) or extra heavy-duty (1HX, protects wires) capability. Units feature 1-port RJ protection and can be purchased as a two unit, front-tofront or a compact, one unit front-to-back protector. Provides rugged protection for Cat., 0BASE-T, token ring, -0ma loop, etc. All MCG rack mounted protectors come supplied with an internal connection to the rack s metal framework. An additional ground strap is provided for connection to the rack frame to ensure superior uninterrupted protection. Capability: Cat., 0Mbps Clamp V:,, 0, 00V Response: <1ns Rack Height: 1 Unit Ports: 1, Front/Back Protects: 1- Wires Connectors: IDC-1, RJ (Female) Dimensions: 1 x 1. x 1. < lbs. 0 Years Note: V for 0BASE-T, RS- V for RS- 0V for CSU/DSU s 00V for DSL, Dial-up Capability: Clamp V: Response: Rack Height: Ports: Protects (H): (HX): Connectors: Dimensions: Weight Cat., 0Mbps Note:,, 0, 00V (H) denotes Heavy Duty unit. <1ns (HX) Extra Heavy Duty.* 1 or Units Available 1, F/F or F/B 1- Wires Pins & RJ, RJ (Female) 1 x 1. x. Front/Back 1 x.0 x 0. Front/Front < lbs. 0 Years * Attenuation <1dB at MHz for HX 1 Burt Drive, Deer Park, New York, USA Telephone: (1) -1 Fax: (1) - Toll Free: , info1@mcgsurge.com

11 Transient Protection Since Transient Protection Since Data Line Pro tec tion 1 Series 1 Port Rackmount Protection for /ISDN/T1/DDS/Dial-Up/Modem/Fax/ PoE Mode A/PoE Mode B//0/00BASE-T Series Port Rackmount Protection for /ISDN/T1/DDS/Dial-Up/Modem/Fax/ PoE Mode A/PoE Mode B//0/00BASE-T Model 1 SurgeFree Protected Panel Model SurgeFree Protected Panel Transient surges can enter electronic equipment through any connection, not just the AC power line. Facilities with reliable AC power protectors can still experience surge-related system downtime. Transient surge energies from sources such as nearby lightning strikes, inductive load switching, ground loop currents, and electrostatic discharge are clamped by AC protectors into the shared communication ground, resulting in damage to expensive communication hardware. The 1 & Series includes: 1 port or port, 1 rack protectors as well as 1 or port, offset wall mounted option where 1 relay rack space is limited. A wide variety of communication interfaces are supported that include 00BASE-T Ethernet,, along with Power over Ethernet Mode A and Mode B. For Telco requirements, units offer protection for Dial-up, T1, DDS, ISDN and other leased line environments. 1-1V-W* 1-0V-W* 1-0V-W* 1-PoE-A* 1-PoE-B 1-.0* 1-CCTV 1-C 1-1V-W-WM* 1-0V-W-WM* 1-0V-W-WM* 1-C-WM 1-PoE-A-WM* 1-PoE-B-WM* 1-0V-W-WM-FA -1V-W-WM* -0V-W-WM* -0V-W-WM* -PoE-A-WM* -PoE-B-WM* -C-WM Application Connectors ISDN/T1/DDS Dial Up / Modem / Fax PoE Mode A PoE Mode B Cable/Satellite CCTV 00BASE-T ISDN / T1 / DDS Dial Up / Modem / Fax 00BASE-T PoE Mode A PoE Mode B ISDN / T1 / DDS ISDN / T1 / DDS Dial Up / Modem / Fax PoE Mode A PoE Mode B 00BASE-T BNC/BNC BNC/BNC Pins Protected Ctr pins Ctr pins Ctr pins Mounting / Height Rack Mount / U Rack Mount / U Rack Mount / U Rack Mount / U Rack Mount / U Rack Mount / 1U Rack Mount / 1U Rack Mount / U Wall Mount / 1U Std. Clamp Peak Pulse Current /00µs 0k AMPS 0 AMPS 0 AMPS 0 AMPS Voltage 1 volts 0 volts 0 volts 0 volts Pins 1,,,. volts Pins,,, 0 volts 0 volts. volts. volts 1 volts 0 volts 0 volts. volts 0 volts Pins 1,,,. volts Pins,,, 0 volts 0 volts 1 volts 0 volts 0 volts 0 volts Pins 1,,,. volts Pins,,, 0 volts. volts * Not UL Listed < ns ULB Listed unless noted 0-Year Warranty -WM = Units can be Wall Mounted or Rack Mounted. -FA = Front Access data ports (easy replacement) 1 Burt Drive, Deer Park, New York, USA Telephone: (1) -1 Fax: (1) - Toll Free: , info1@mcgsurge.com

12 $.00USD Part No. -00-

Data Communication and Telecommunication Surge Suppression

Data Communication and Telecommunication Surge Suppression Technical Data TD01001002E Effective September 2006 New Information Contents ECCP EDDP EMTJ EPCH Coaxial or twinaxial-based networked equipment