Transcription

1

2 Table of Contents & world lightning maps & 2008 RSA Lightning maps world lightning map 6-11 Applications 12 Under/Over voltage switch 13 Plugtops and Mains plugin 13 Mains protectors & filters 14 Mains wireable 40kA 15 Mains & telephone/isdn/adsl 16 MainsTelephone/Isdn/Adsl and UTP network 17 Mains & Satelite/DSTV & Dish 18 Intercom/Data 18 CCTV/security 19 Network/Utp/Poe 20 Network POE injector 21 Electric fence energizer 22 Manufacturing Plant Protection These are our general products, we have a large variety of custom products and can manufacture OEM products for your specific needs. Call us now to find out more!

3 This is a lightning density map of the world over an eight year period from 1995 to This is an ongoing research project run by NASA. What this shows us is for example there is a higher density and occurrence of lightning over sub-saharan Africa than in Europe. It is also for this reason that the products made in Europe to protect equipment are not of a strong enough protection level for us in South Africa. For example our mains units are between 6.5kA and10ka. The equivalent in Europe are only 1.5kA to 2.5kA. We are highlighting this as there is sometimes the perception that the local products are inferior or not as good as the one from Europe. This obviously is not the case when you compare the specifications. Note the increased intensity between the two regional maps for South Africa. The significant increase in the two years. NASA images Page 3

4 Page 4

5 Lightning Density Map for 2011 Note the increase in intensity from the previous maps. Yearly it is getting worse causing more damage as we have increased usage of electronic devices. Page 5

6 Page 6

7 Home Protection Mains AC protection and Filters Under / Over Voltage Protection Mains & Telephone / ISDN / ADSL UTP 10/100/1000 and POE CCTV

8 KN-LPMFL-01 Page 8

9 Page 9

10 Page 10

11 KN-LPMFL-01 Home theatre systems, TV s and sound systems are very sensitive to any form of voltage fluctuation. The filter units and under/over units are designed to prevent damage from voltage fluctuations and surges. The mains and satellite is to keep your decoder / PVR safe from any induced or other voltage surges. Page 11

12 Under Over Voltage Switch Irregular voltages or spikes can be severely harmful to your equipment. The compressors on normal fridges will burn out if the voltage is too low [below 190V]. TV s, Hi Fi s, Computers, Monitors, Fax machines, Photo copiers, and more, are all likely to sustain damage if the 220V supply suddenly rises to above 250V. Part: KN-UO16-DS The high low voltage protector will protect equipment operating between volts AC and will safely pass a maximum current of 15Amps. If the voltage goes below 190V or it goes above 250V, the unit will switch off your appliance. The unit will remain off until the voltage returns to normal. Should the voltage have dropped for a split second the unit will switch off but will not switch on until the delay period has passed [minimum of 20 seconds]. This product also has built in lightning and surge protection to further enhance the protection levels of your equipment. On detection of a spike the unit will also switch off. Operation Plug the unit into the wall socket and switch on. Allow +/- 10 seconds for the unit to calibrate, the display will show a line running around the outside of the square while calibrating. On completion a number will be displayed for example 5 which indicates that the voltage is between 221 and 225. See the top of the Unit for the complete table. Should the voltage be too low the unit will display an L and will not switch on. The same applies if the voltage is too high and H is is played an the unit will remain off. The unit is microprocessor controlled and is software adaptable. Indicator Lights Number displayed to indicate voltage range Blue on all is OK Part: KN-UO16-GMP Part: KN-UO16-WGL Red on high voltage failure H shown in display Red on low voltage failure L shown in display Red & Blue off no power to unit or unit needs to be replaced after protecting your equipment. Part: KN-OU35-DIN1 Din Rail mount Under Over voltage switch single phase. LCD display shows nominal, Low and High Voltages for the last 8 hours. Switching current max 35A. Delay 40 seconds. Page 12

13 Mains Power Protection Any equipment or appliance that plugs into the mains needs this protection. The induced surge comes down the cable to your equipment and causes damage. This can be caused by lightning or surge in voltage by your power provider like Eskom. Protected Plugtop Protection to fit on any appliance or equipment that needs protection from a surge on the mains power side. Led ON protection OK Led OFF faulty replace unit Nominal Operating Voltage Max Current withstand Max Operating voltage 230V AC 10kA (8/20 µs) 275V AC South Africa Insurance Approved [SAIA] Part: Ki-3MPT-AL Ki-3MPT-ALD [dedicated earth pin] Mains Plug-in Unit Nominal Operating Voltage Max Current withstand Max Operating voltage 230V AC 10kA (8/20 µs) 275V AC South Africa Insurance Approved [SAIA] Compliance: Sabs/Sans IEC :1995, IEC 60950, VC 8008 Part: Ki-LPM1-AL Page 13

14 Single Phase and Three Phase wire able units Nominal Operating Voltage 230V AC Max Current withstand 40kA (8/20 µs) Max Operating voltage 275V AC South Africa Insurance Approved [SAIA] Part: Ki-1PH40 [single phase 40kA] Ki-3PH40 [3 phase 40kA] 40kA single phase protector 40kA three phase protector Mains Surge and Filter Units Nominal Operating Voltage Max Current withstand Max Operating voltage 230V AC 10kA (8/20 µs) 275V AC South Africa Insurance Approved [SAIA] Compliance: Sabs/Sans IEC :1995, IEC 60950, VC 8008 Part: Ki-LPMFL-01 STD grade filter and mains surge [plug in] Ki-LPMFL-02 Hi grade filter and mains surge [plug in] Ki-LPMFL-03 STD grade filter and mains surge [hardwire] Ki-LPMFL-04 Hi grade filter and mains surge [hardwire] Page 14

15 Mains Surge and Telephone line Units Nominal Operating Voltage 230V AC Max Current withstand 10kA (8/20 µs) Max Operating voltage 275V AC Telephone Line Max impulse voltage 10kV [1.2/50µs] Max impulse current 10kA [8/20µs] Peak pulse current 20kA [8/20µs] South Africa Insurance Approved [SAIA] Compliance: Sabs/Sans IEC :1995, IEC 60950, VC 8008, Telkom RE-TF0007, TPL2499, TPL2411 Part: Ki-LPMTL1-AL {mains, tel, Adsl, Isdn] Telephone line Units Max impulse voltage Max impulse current Peak pulse current 10kV [1.2/50µs] 10kA [8/20µs] 20kA [8/20µs] South Africa Insurance Approved [SAIA] Compliance: Telkom TPL2408, Icasa 2003/017 Designed to work for analogue, Isdn & Adsl lines. Part : Ki-LPTEL1-G Page 15

16 Mains Surge, Network 1GB UTP and Telephone line / ADSL Units Mains Nominal Operating Voltage 230V AC Max Current withstand 10kA (8/20 µs) Max Operating voltage 275V AC Compliance: Sabs/Sans IEC :1995, VC 8008 Telephone Line Max impulse voltage Max impulse current Peak pulse current South Africa Insurance Approved [SAIA] Compliance: IEC 60950, Telkom RE-TF0007, TPL2499, TPL kV [1.2/50µs] 10kA [8/20µs] 20kA [8/20µs] Network Protective circuit 4 x twisted pairs Data Transfer 1000Mb/s [1Gb] Peak Pulse current 150A [8/20µs] Low Capacitance <25pF Peak off state voltage 56 Standards: Fast Ethernet 802.3U, IEC 11801, IEC802.3 Part No. KN-MFN-1 Mains, Tel / ADSL and Network 1Gb & POE KN-MUTP1 Mains & UTP 10/1000 / POE Page 16

17 Mains Satellite and TV Nominal Operating Voltage Max Current withstand Max Operating voltage 230V AC 10kA (8/20 µs) 275V AC Satellite Line Max impulse voltage 10kV [1.2/50µs] Max impulse current 10kA [8/20µs] Line Impedence 75Ω [ohm] Losses <1dB South Africa Insurance Approved [SAIA] Compliance: Sabs/Sans IEC :1995, IEC 60950, VC 8008, Part No: 1] Ki-LPSAT2-A Mains and Satellite 2] Ki-LPSAT31-ST Mains, Satellite & TV 3] Ki-LPSAT31-DV Mains & dual view sat 4] Ki-LPSAT31-DVT Mains, dual view & TV Satellite Dish [LNB] protector Max impulse voltage Max impulse current Line Impedence Losses 10kV [1.2/50µs] 10kA [8/20µs] 75Ω [ohm] <1dB Part : Ki-LPSAT1-A [single line] Ki-LPSAT1-D [dual view 2 lines] Page 17

18 CCTV / Video Line Protector The 12 port unit is only available in a 1U rack mount, but multiple units can be used and the number of units loaded can also be selected as they are modules. Part : Ki-CCTV-12P 12 port rack Ki-CCTV-SNG CCTV single module Ki-CCTV-DC coax video & DC 12-48V Ki-CCTV-PLT 12 port rack plate only [unloaded] Dataline Protection For protection of multiple signal lines on items like intercoms, access control, alarm panels and comms lines that use current loop. RS232 & RS485. Part no: KN-10DL1 [in line protector ] Ki-LPCOM-9 [DB9 connector m/f] Ki-LPCOM-25 [DB25 connector m/f] Page 18

19 UTP Network Protector 10/100/1000 & POE The 12 port unit is only available in a 1U rack mount, but multiple units can be used and the number of units loaded can also be selected as they are modules. Part : Ki-LP1000B-12P 12 port unit Ki-LP100X-POE Ki-LP100B-PLT Ki-MUTP2 single POE & UTP module 12 port rack plate only [unloaded] Mains & UTP/POE Protective circuit 4 x twisted pairs Data Transfer 1000Mb/s [1Gb] Peak Pulse current 150A [8/20µs] Low Capacitance <25pF Peak off state voltage 56 Disconnect on all 8 lines. Standards: Fast Ethernet IEEE 802.3ab, IEC 11801, South African Insurance Association [SAIA] Approved Note: Units must be earthed/grounded. Uses: 1. UTP 1gB networks 2. POE power over Ethernet 3. various IP devices, such as CCTV cameras 10 Port POE Injector panel with surge protection. Data in 2 pairs, data and POE out 4 pairs. Page 19

20 10 Port POE Injector Panel [Up to 48 VDC] Device Pin Outs Pin Input RJ45 [DATA only] RJ-45 Output (Data & Power) 1 RX+ Data Receive(+) RX+ Data Receive(+) 2 RX- Data Receive(-) RX- Data Receive(-) 3 TX+ Data Transmit(+) TX+ Data Transmit(+) 4 NC No Connection +Vdc DC power(+) 5 NC No Connection +Vdc DC power(+) 6 TX- Data Transmit(-) TX- Data Transmit(-) 7 NC No Connection -Vdc DC power(-) 8 NC No Connection -Vdc DC power(-) Surge and Lightning Protection Peak Pulse current 150A [8/20µs] Disconnect on all 8 lines. Protective circuit 4 x twisted pairs Part Numbers: Ki-1000B-Inj Single Injector module Ki-LP-INJ-PLT 10 port Plate with Power module Uses: 1. UTP POE networks 2. POE power over Ethernet 3. various IP devices, such as CCTV cameras, VOIP phones. Page 20

21 Electric Fence Energiser Protector SPECIFICATIONS Fence Max operating voltage 9kV Part no. KN-LPEF-01[Singlefence] KN-LPEF-02[Dualfence] Max impulse current 10kA Protection on the incoming mains power and on the energiser wires. Page 21

22 Telephone / Adsl Computer Network and Servers Data Lines Mains and Mains with Filter Under/ over Voltage