Coaxlink Coaxlink Duo PCIe/104. EURESYS s.a Document version built on

Size: px

Start display at page:

Download "Coaxlink Coaxlink Duo PCIe/104. EURESYS s.a Document version built on"

Baldric Howard
5 years ago
Views:

1 HARDWARE MANUAL Coaxlink 64 Coaxlink Duo PCIe/4 EURESYS s.a. 6 - Document version..7 built on 6--4

2 EURESYS s.a. shall retain all property rights, title and interest of the documentation of the hardware and the so ware, and of the trademarks of EURESYS s.a. All the names of companies and products mentioned in the documentation may be the trademarks of their respective owners. The licensing, use, leasing, loaning, translation, reproduction, copying or modification of the hardware or the so ware, brands or documentation of EURESYS s.a. contained in this book, is not allowed without prior notice. EURESYS s.a. may modify the product specification or change the information given in this documentation at any time, at its discretion, and without prior notice. EURESYS s.a. shall not be liable for any loss of or damage to revenues, profits, goodwill, data, information systems or other special, incidental, indirect, consequential or punitive damages of any kind arising in connection with the use of the hardware or the so ware of EURESYS s.a. or resulting of omissions or errors in this documentation.

3 Contents Coaxlink Hardware Manual PCIe/4 products Contents About This Document... Document Scope... Document Structure... Document Revision History... 6 Mechanical Specification... 7 Product Pictures... 7 Physical Characteristics... 8 CAD Models... 9 PCIe/4 stacking rules...9 Components Location... Connectors... CoaXPress Host Connector CoaXPress Host A Connector Duo PCIe/4... CoaXPress Host B Connector Duo PCIe/4... I/O Connector CC-Link Connector Mono Duo Quad Quad G Duo PCIe/4 Quad G DF...4 Duo PCIe/4 Camera Power Input Connector... Lamps... 6 CoaXPress Host Connector Indicator Lamps...6 Lamp Duo PCIe/ Board Status Lamp...7 FPGA Status Lamp...8 Jumpers and Switches... 8 Firmware Recovery Switch... 8 Electrical Specification... 9 CoaXPress Host Interface... 9 PCI Express Interface... Power Supply Specification... Power Distribution... PCI Express Power Specification... Camera Power Input Specification... I/O Power Output Specification... I/O Ports... Diﬀerential Input... TTL Input/Output... iii

4 Coaxlink Hardware Manual PCIe/4 products Contents Isolated Input...6 Isolated Output...8 Environmental Specification... Environmental Conditions... Thermal Design... CE Compliance (EMC Class B)... FCC Compliance (Class B)... RoHS Compliance... WEEE... Related Products & Accessories... CC-Link Ribbon Cable... Custom CC-Link Ribbon Cable Assembly... iv

5 About This Document Coaxlink Hardware Manual PCIe/4 products About This Document Document Scope This document describes the hardware specifications of all the PCI Express/4 products of the Coaxlink series together with their related products. Coaxlink Frame Grabbers Product S/N Prefix Icon KDR Duo PCIe/4 S/N Prefix Icon KCC Coaxlink Duo PCIe/4 Related Accessories Product 66 InterPC CC-Link Adapter HD6F I/O module for Coaxlink Duo PCIe/4 Thermal drain (Model ) for Coaxlink Duo PCIe/4 DIN./. Coaxial cable for Coaxlink Duo PCIe/4 Note: The S/N prefix is a -letter string at the beginning of the card serial number. Note: Icons are used in this document for tagging titles of card-specific content. Document Structure This document is composed of main sections: Mechanical Specification on page 7 provides the product pictures, the physical dimensions, the connectors description and the pin assignments, the lamps description, etc. Electrical Specification on page 9 provides the electrical characteristics of all input/output ports, a description of the power distribution, power requirements, etc. Environmental Specification on page provides the climatic requirements and CE/FCC/RoHS/WEEE compliance statements. Related Products & Accessories on page provides a description of related products and accessories such as adapters, cables

6 Coaxlink Hardware Manual PCIe/4 products About This Document Document Revision History Date Document ersion Description First edition of Coaxlink PCIe/4 Hardware Manual. New products: Coaxlink Duo PCIe/4 HD6F I/O module for Coaxlink Duo PCIe/4 Thermal drain (Model ) for Coaxlink Duo PCIe/4 DIN./. Coaxial cable for Coaxlink Duo PCIe/4

7 Mechanical Specification Coaxlink Hardware Manual PCIe/4 products Mechanical Specification Mechanical specifications of the product(s) including: product pictures, physical dimensions, connectors description and pin assignments, lamps description, switches description, etc. Product Pictures 64 Coaxlink Duo PCIe/4 HD6F I/O module for Coaxlink Duo PCIe/4 7

Coaxlink Hardware Manual PCIe/4 products Mechanical Specification Coaxlink Duo PCIe/4 System Assembly Composition: pc. 64 Coaxlink Duo PCIe/4 pc. HD6F I/O module for Coaxlink Duo PCIe/4 pc.

8 Coaxlink Hardware Manual PCIe/4 products Mechanical Specification Coaxlink Duo PCIe/4 System Assembly Composition: pc. 64 Coaxlink Duo PCIe/4 pc. HD6F I/O module for Coaxlink Duo PCIe/4 pc. Thermal drain (Model ) for Coaxlink Duo PCIe/4 pc. DIN./. Coaxial cable for Coaxlink Duo PCIe/4 Physical Characteristics Product Item 8 Length Width Weight 64 Coaxlink Duo PCIe/4 96 mm,.77 in 9 mm,. in 7 g,.6 oz HD6F I/O module for Coaxlink Duo PCIe/4 Module 7 mm,.76 in 4 mm,.7 in 6 g,. oz HD6F I/O module for Coaxlink Duo PCIe/4 Cable 4 mm, in 6 mm,.6 in 7 g,.6 oz Thermal drain (Model ) for Coaxlink Duo PCIe/ mm,.4 in DIN./. Coaxial cable for Coaxlink Duo PCIe/4 mm, 7.9 in

9 Mechanical Specification Coaxlink Hardware Manual PCIe/4 products CAD Models D CAD models are available on request for the following assemblies: Assembly File formats 64 Coaxlink Duo PCIe/4 DWF, STP 64 Coaxlink Duo PCIe/4 with Thermal drain (Model ) for Coaxlink Duo PCIe/4 DWF, STP HD6F I/O module for Coaxlink Duo PCIe/4 DWF, STP PCIe/4 stacking rules One or two 64 Coaxlink Duo PCIe/4 modules can be stacked directly under the Host PC. The Host PC must be equipped with one stack-down connector of the following types: Type PCIe/4 with PCI Express x4 links providing four active lanes. Type PCIe/4 with PCI Express x6 link configured to operate as x8 links providing at least four active lanes per link. Note: According the PCIe/4 specification, a Type PCIe/4 host PC that supports a PCIe x6 link is not required to support two x8, or two x4 links. For such PCs, only one 64 Coaxlink Duo PCIe/4 module can be stacked underneath! Host PC with PCIe/4 Type Stack-DOWN PCIe x x PCIe x PCIe x Coaxlink Duo PCIe/4 # PCIe x Coaxlink Duo PCIe/4 # Figure : PCIe/4 stack with a Type Host PC and modules. 9

10 Coaxlink Hardware Manual PCIe/4 products Mechanical Specification Host PC with PCIe/4 Type Stack-DOWN PCIe x4 # PCIe x4 # 4x PCIe x PCIe x Coaxlink Duo PCIe/4 # PCIe x Coaxlink Duo PCIe/4 # Figure : PCIe/4 stack with a Type Host PC and modules. Each 64 Coaxlink Duo PCIe/4 module: Uses only 4 PCI Express lanes. Routes to the next module the 4 unused PCI Express x links. Shi s by 8 positions and routes to the next module the lowest 8 lanes of the PCI Express x6 link. Re-drives the clock of the Type PCI Express x6 or the Type PCI Express x4 links. Components Location 64 Coaxlink Duo PCIe/4 CC-Link connector PCI Express connector Heatsink Board status lamp FPGA status lamp CoaXPress Host connector B A Camera power input connector Firmware + lamp recovery switch Extension connector

11 Mechanical Specification Coaxlink Hardware Manual PCIe/4 products HD6F I/O module for Coaxlink Duo PCIe/4 IO Connector CoaXPress Host Indicator lamps A To Coaxlink Duo PCIe/4 Extension connector L = mm B DIN./. Coaxial cable for Coaxlink Duo PCIe/4 DIN./. 7 Ohms straight panel-mount male connector L = mm RG79 7 Ohms coaxial cable MCX 7 Ohms right-angled male connector To Coaxlink Duo PCIe/ 4 CoaXPress Host Connector Connectors CoaXPress Host Connector Connector description Property alue Name CoaXPress Host Type x DIN./. 7 Ohms coaxial receptacles Location Usage Module-to-chassis coaxial cables CoaXPress Host Interface CoaXPress Data Forwarding Interface

12 Coaxlink Hardware Manual PCIe/4 products Mechanical Specification Property alue inner outer Layout Pin assignments Pin Signal Usage Inner CXP_A CoaXPress Host Connection A Outer GND Inner CXP_B Outer GND Ground CoaXPress Host Connection B Ground CoaXPress Host A Connector Duo PCIe/4 Connector description Property alue Name CoaXPress Host A Type MCX 7 Ohms coaxial female receptacle Location Usage Printed circuit board CoaXPress Host Interface CoaXPress Data Forwarding Interface outer Layout Pin assignments Pin Signal Usage Inner CXP_A CoaXPress Host Connection A Outer GND Ground CoaXPress Host B Connector Connector description Property Name alue CoaXPress Host B Duo PCIe/4 inner

13 Mechanical Specification Coaxlink Hardware Manual PCIe/4 products Property Type Location Usage alue MCX 7 Ohms coaxial female receptacle Printed circuit board CoaXPress Host Interface CoaXPress Data Forwarding Interface outer inner Layout Pin assignments Pin Signal Usage Inner CXP_B CoaXPress Host Connection B Outer GND I/O Connector Ground Connector description Property alue Name I/O Type 6-pin -row high-density female sub-d connector Location Usage Remote I/O module General purpos I/O and power output Layout 9 Pin assignments Pin Signal Usage GND Ground DIN+ High-speed diﬀerential input # Positive pole IIN+ Isolated input # Positive pole 4 IIN- Isolated input # Negative pole IIN4- Isolated input #4 Negative pole 6 IOUT- 7 GND Isolated contact output # Negative pole Ground

14 Coaxlink Hardware Manual PCIe/4 products Mechanical Specification Signal Pin 8 Usage Not connected 9 GND Ground GND Ground DIN- High-speed diﬀerential input # Negative pole IIN- Isolated input # Negative pole IIN+ Isolated input # Positive pole 4 IIN+ Isolated input # Positive pole IIN4+ Isolated input #4 Positive pole 6 IOUT+ Isolated contact output # Positive pole 7 TTLIO TTL input/output # 8 GND 9 DIN- High-speed diﬀerential input # Negative pole DIN+ High-speed diﬀerential input # Positive pole IIN- Isolated input # Negative pole IOUT- Isolated contact output # Negative pole IOUT+ Isolated contact output # Positive pole 4 GND TTLIO 6 + CC-Link Connector Ground Ground TTL input/output # + Power output Mono Duo Quad Connector description Property Name CC-Link Type 6-pin dual-row." pitch pin header with shrouding Location Usage 4 alue Printed circuit board Card-to-card link Quad G Duo PCIe/4 Quad G DF

15 Mechanical Specification Coaxlink Hardware Manual PCIe/4 products Property alue Layout 6 Pin assignments Pin Signal Usage GND Ground CSync GND 4 CSync GND 6 CSync Card-to-card synchronization bus Signal Ground Card-to-card synchronization bus Signal Ground Card-to-card synchronization bus Signal Camera Power Input Connector Duo PCIe/4 Connector description Property alue Name Camera Power Input Type 4-pin.-in Molex KK 7478 male connector Location Usage Printed circuit board DC power input for PoCXP Layout 4 Pin assignments Pin Signal Usage GND Ground DC input DC input 4 GND Ground

16 Coaxlink Hardware Manual PCIe/4 products Mechanical Specification Lamps CoaXPress Host Connector Indicator Lamps Lamps on the Coaxlink bracket indicating the state of each CoaXPress Link connection. Each connector of the CoaXPress Host Interface is associated with a CoaXPress Host Indicator Lamp. CoaXPress Host Connector Indicator Lamps States Lamp State Symbol Meaning Oﬀ The Coaxlink card is not powered Solid orange System booting Fast flash alternate green / orange The connection detection is in progress; PoCXP is active. This state is shown for a minimum of s even if the connection detection is faster The connection detection is in progress; PoCXP is oﬀ. Fast flash orange This state is shown for a minimum of s even if the connection detection is faster Solid red The PoCXP over-current protection has tripped. Solid green The Device to Host connection is established, but no data being transferred Slow pulse orange The Device to Host connection is established, but the Host is waiting for a trigger. Fast flash green. The Device to Host connection is established and image data is being transferred Flashing Lamp States Timing Deﬁnitions 6 Indication Timing Fast duty cycle: ms on, 6 ms oﬀ Fast flash alternate (color /color duty cycle: ms on (color ), 6 ms oﬀ, ms on (color ), 6 ms oﬀ Slow duty cycle: second on, second oﬀ

17 Mechanical Specification Coaxlink Hardware Manual PCIe/4 products Indication Timing Slow pulse (red orange) % duty cycle: ms on, 8ms oﬀ Lamp Duo PCIe/4 lamp states Lamp state Symbol Meaning No + power. Possible causes are: Oﬀ There is no power delivered on the + rail of the PCIe/4 connector The + fuse is blown on the card Solid green power OK. Board Status Lamp Board status lamp indicator states Lamp state Oﬀ Solid green Symbol Meaning No power. The board is not powered or the power distribution network is not functional. Board status OK. The main power distribution network is operational and the FPGA start-up procedure has successfully completed. Board status NOK. Possible causes are: Solid red There is no power delivered on the + rail of the PCI Express connector slot The FPGA start-up procedure is not completed. The normal completion time is around milliseconds. At least one power converter of the main power distribution network is unable to operate properly. This might be caused by excessive temperature due to inadequate board cooling, accidental short-circuits having blown one (or more) protection fuses, inappropriate supply voltages, etc. 7

18 Coaxlink Hardware Manual PCIe/4 products Mechanical Specification FPGA Status Lamp FPGA status lamp indicator states Lamp state Symbol Meaning Oﬀ Board not powered. Solid green FPGA status OK. All the FPGA clock networks and the DDR memory are operating normally. FPGA status NOK. Possible causes are: Solid red At least one FPGA clock network is not operating normally. This might be caused by excessive jitter on external clock signals of the CoaXPress or the PCI Express interfaces. The DDR memory controller has not been able to successfully perform the calibration procedure. Jumpers and Switches Firmware Recovery Switch Jumper positions Jumper position Meaning Normal mode. (Factory default) At next power on, the FPGA will boot with the latest uploaded firmware. Recovery mode. At next power on, the FPGA will boot with the last but one uploaded firmware. Note: The recovery mode must be used only in case of emergency situations: i.e. when the latest uploaded firmware is not functional and the card is no more detected by the Host PC. 8

19 Electrical Specification Coaxlink Hardware Manual PCIe/4 products Electrical Specification Electrical specification of the product(s) including: electrical characteristics of all the input/output ports, description of the power distribution, power requirements, etc. CoaXPress Host Interface Each connection of the CoaXPress Host interface implements a Host Transceiver (HT) and a Power Transmitting Unit (PTU). Host Transceiver The Host transceiver implements a high-speed cable receiver and a low-speed cable driver for CXP-6 speeds. It fulfills the electrical specification of the CoaXPress. standard. Namely: The cable receiver requirements for the high-speed connection described in Table of the Annex B of the CoaXPress Standard. The cable driver requirements for the low-speed connection described in Table of the Annex B of the CoaXPress Standard. Host Transceiver Speciﬁcation Conditions High-speed connection bit rate Min.. Low-speed connection bit rate Max. cable length Typ..8 Max. Unit 6. GT/s MT/s BELDEN GT/s m BELDEN GT/s m BELDEN GT/s m BELDEN GT/s 6 m BELDEN 6. GT/s 4 m Power Transmitting Unit The Power Transmitting Unit implements Power over CoaXPress (PoCXP) as specified in section 7 of the CoaXPress Standard.. If fulfills all the requirements for a Host; namely: Over-current protection (OCP) PoCXP CoaXPress Device detection In addition: it provides the user with an AUTO/OFF control: Setting the control to AUTO initiates a new PoCXP device detection; the power will be applied only if the detection succeeds 9

20 Coaxlink Hardware Manual PCIe/4 products Electrical Specification Setting the control to OFF forces the PTU to disconnect. The control is OFF after power on, and, if providing power to the camera is required, has to be set to AUTO by the application. Power Transmitting Unit Speciﬁcation Min. Typ. Max. Unit DC output voltage 4 6 Available output power 7 W OCP holding current 79 ma OCP nominal trip current PoCXP Device detection sensing current A, µa Note: The above specification applies over the whole operating temperature range of the Coaxlink card. PCI Express Interface The PCI Express Interface implements a PCIe end-point interface and provides electrical power to the Coaxlink card. PCI Express end-point type per product PCIe end-point Product 64 Coaxlink Duo PCIe/4 4-lane Rev. 4-lane Rev. PCIe end-point Mono Duo Quad The 4-lane Rev. PCIe end-point: complies with Revision. of the PCI Express Card Electromechanical specification. supports -lane, -lane, and 4-lane link width supports PCIe Rev. link speed (. GT/s with 8b/b coding) supports PCIe Rev. link speed (. GT/s with 8b/b coding) supports payload size up to bytes oﬀers the optimal performance when it is configured for 4-lane PCIe Rev. link speed ( GT/s) PCIe end-point to PC memory data transfer performance Conditions Min. GT/s (PCIe Rev.) Sustainable output data rate Max. Unit,6 MB/s GT/s (PCIe Rev.) 8 MB/s GT/s (PCIe Rev.) 8 MB/s 4-lane Rev. PCIe end-point Duo PCIe/4 The 4-lane Rev. PCIe end-point: complies with Revision. of the PCI Express Card Electromechanical specification. Typ.

21 Electrical Specification Coaxlink Hardware Manual PCIe/4 products supports -lane, -lane, and 4-lane link width supports PCIe Rev. link speed (. GT/s with 8b/b coding) supports PCIe Rev. link speed (. GT/s with 8b/b coding) supports payload size up to bytes oﬀers the optimal performance when it is configured for 4-lane PCIe Rev. link speed ( GT/s) PCIe end-point to PC memory data transfer performance Conditions Min. GT/s (PCIe Rev.) Sustainable output data rate Typ. Max. Unit,6 MB/s GT/s (PCIe Rev.) 8 MB/s GT/s (PCIe Rev.) 8 MB/s Power Supply Specification Power Distribution Power Distribution Scheme Duo PCIe/4 The power distribution scheme of 64 Coaxlink Duo PCIe/4 has two distinct distribution networks: The main power distribution network The camera power distribution network Camera power distribu on network Main power distribu on network PCIe/4 stack 4-pin Molex cable plug PCIe/4 connector Camera Power Input connector + PTC +4 A fuse. A PTC A fuse Extension connector On-board electronics PoCXP Transmi er. A Units & On-board electronics + + Electronic fuse/switch +4 Electronic fuse/switch +4 CoaXPress Host connector A B I/O module. A PTC Electronic fuse I/O connector Figure : 64 Coaxlink Duo PCIe/4 power distribution scheme Note: The protection fuses are not serviceable! When blown, the card must be returned to the factory. Note: The PTC fuses are self-resettable. Note: The Coaxlink card can be operated without applying power to the camera power distribution network.

22 Coaxlink Hardware Manual PCIe/4 products Electrical Specification Main power distribution network Duo PCIe/4 The main power distribution network delivers power to all the on-board electronic devices including FPGA, memory chips, CoaXPress transceivers, I/O drivers and receivers, fan motor. It delivers also +. and + to the HD6F I/O module for Coaxlink Duo PCIe/4 plugged on the extension connector: The +. is used for powering the on-board electronics: I/O drivers, I/O receivers The + is used for delivering power on the I/O connector. A PTC fuse inserted at the input of prevents potential fire hazards. The network is fed by the Host PC through the + power rail of the PCIe/4 connector. A protection fuse prevents potential fire hazards. The + lamp indicates the presence of + a er the protection fuse. The board status LED lamp reflects the global status of all the power converters of the main distribution network. Camera power distribution network Duo PCIe/4 The auxiliary power distribution network delivers power to the CoaXPress cameras using the PoCXP capability available on all connections of the CoaXPress Host connector. The network is fed by a 4 DC external power supply attached to the camera power input connector using a power cable terminated by a 4-pin Molex plug connector. A protection fuse inserted at the input side prevents potential fire hazards. The 4-volt DC power is applied to each camera connection through a PoCXP transmitter unit. Each PoCXP transmitter unit implements an electronic fuse/switch. A PTC fuse inserted at the input of each transmitter unit prevents potential fire hazards. PCI Express Power Specification 64 Coaxlink Duo PCIe/4 Conditions + voltage + power Min. Typ. Max. Units... No I/O module 8.4 W With I/O module, excluding I/O power output TBD W Note: The typical power values were measured under following conditions: Acquiring image data using all CoaXPress Host Interface connections operating at their maximum speed Delivering image data on the PCI Express configured for the largest link width and the highest link speed C [77 F] ambient temperature and nominal supply voltages Camera Power Input Specification DC input voltage Conditions Min. Typ. Max. Units 4

23 Electrical Specification Coaxlink Hardware Manual PCIe/4 products DC input power Conditions Min. Typ. Max. Units -connection PoCXP 7 W -connection PoCXP 4 W Note: DC specification per CoaXPress. Standard for Host devices except for DC input voltage range. I/O Power Output Specification A non-isolated + power output is available on every I/O connector. The power originates from an external power supply plugged into the Auxiliary Power Input connector. It is distributed from a common electronic fuse to all the I/O connectors. The electronic fuse provides the following protections: Limits the inrush current during power on sequence Protects the Coaxlink card and the power source against overload Protects the Coaxlink card the power source against short-circuits. The sum of the load currents drawn from all the outputs of the I/O connectors must be lower or equal to the specified maximum output current. I/O + power output speciﬁcation Conditions Aggregated output current oltage drop across the electronic fuse Min. Typ. Max. Units Operating temperature range. A Max. output current. Note: The above specification applies over the whole operating temperature range of the Coaxlink card. I/O Ports Diﬀerential Input. IN+ IN- KΩ Ω AM6LE pf Data In KΩ Figure 4: Simpliﬁed schematic

24 Coaxlink Hardware Manual PCIe/4 products Electrical Specification The receiver complies with the ANSI/TIA/EIA-4B specification. DC Characteristics Conditions Common mode voltage Min. Typ. -7 Diﬀerential sensitivity Input impedance ESD protection Max. Units +7 m Ohm Human Body Model (HBM) k Contact discharge 8 k Air gap discharge k AC characteristics Pulse width Pulse rate Min. Typ. Logical map The state of the port is reported as follows: Diﬀerential Input voltage HIGH (IN+ - IN-) < - m LOW Unconnected input HIGH The following drivers are compatible with the high-speed diﬀerential input ports: 4 Logical State (IN+ - IN-) > + m Compatible drivers and receivers Units ns %-9% rise/fall time ANSI/EIA/TIA-4/48 diﬀerential line drivers Complementary TTL drivers Max. MHz µs

25 Electrical Specification Coaxlink Hardware Manual PCIe/4 products TTL Input/Output 74LT TTLIO Data In/Out Direc on Ω 74LT Figure : Simpliﬁed schematic The receiver is LTTL and TTL compliant. The driver is a. TTL driver DC characteristics Conditions Common mode input voltage Min. Typ. Low-level output current Low-level output voltage ESD protection Units ma. High-level output current High-level output voltage Max. - ma. k Human Body Model (HBM) Note: The I/O port includes a latch-up protection. AC characteritics Pulse width Pulse rate %-9% rise/fall time Min. Typ. Max. Units ns MHz µs

26 Coaxlink Hardware Manual PCIe/4 products Electrical Specification Logical Map The state of the port is reported as follows: Logical State Input voltage IN >. HIGH IN <.8 LOW Unconnected input port Undetermined Compatible drivers and receivers The following drivers are compatible: Totem-pole LTTL, TTL, CMOS drivers The following receivers are compatible: LTTL, TTL, -olt CMOS receivers Isolated Input IN+ Opto-coupler Comparator Current limiter ref Data In IN- Figure 6: Simpliﬁed schematic The input port implements an isolated current-sense input. DC characteristics Conditions Diﬀerential voltage Min. - Input current threshold Diﬀerential voltage Input current Max. Units ma..6 - IN-) =.6 - IN-) =. - IN-) =. - IN-) = - IN-) = 6 Typ. ma

27 Electrical Specification Coaxlink Hardware Manual PCIe/4 products Conditions Min. - IN-) < Max. Units µa AC isolation voltage 7 RMS Iin [ma] DC isolation voltage. Threshold in [olt].6.. Figure 7: Input Current vs. Input oltage Characteristics AC characteristics Min. Pulse width Pulse rate Typ. Max. Units µs khz Logical map The state of the port is reported as follows: Input current Logical State IIN > ma HIGH IIN < ma LOW Unconnected input port LOW Compatible drivers and receivers The following drivers are compatible with the isolated current-sense inputs: Totem-pole LTTL, TTL, CMOS drivers RS-4 Diﬀerential line drivers Potential free contact, solid-state relay, or opto-isolators and 4 signaling voltages are also accepted Note: The + power supply on the I/O connector(s) can be used for powering drivers requiring a power supply. Note: No external resistors are required. However, to obtain the best noise immunity with and 4 signaling, it is recommended to insert a series resistor in the circuit. The recommended resistor values are: 4.7kOhms for signaling and kohms for 4 signaling. 7

28 Coaxlink Hardware Manual PCIe/4 products Electrical Specification Isolated Output OUT+. Input OUT- Turn-off time enhancement circuit Figure 8: Simpliﬁed schematic The output port implements an isolated contact output. DC characteristics Conditions Min. Typ. Max. Units ma Closed ma.4 Closed ma. Current Open state Diﬀerential voltage - DC isolation voltage AC isolation voltage 7 RMS Note: The output port in the closed state having no current limiter, the user circuit must be designed to avoid excessive currents that can destroy the output port. Note: The output port remains in the OFF-state until it is under control of the application. AC characteristics Min. Pulse rate Typ. Max. Units khz Turn-on time µs Turn-oﬀ time µs Typical switching C 8 Current [ma] Turn ON time [µs] Turn OFF time [µs]

29 Electrical Specification Coaxlink Hardware Manual PCIe/4 products Current [ma] Turn ON time [µs] Turn OFF time [µs] Logical map The state of the output port is determined as follows: Logical State Output port state HIGH The contact switch is closed (ON) LOW The contact switch is open (OFF) Compatible loads The following loads are compatible with the isolated contact output ports: Any load within the / ma envelope is accepted. The power originates from an external power source or alternatively from the power delivered through the and GND pins of the I/O connectors. 9

30 Coaxlink Hardware Manual PCIe/4 products Environmental Specification Environmental Specification Environmental specification of the product(s) including: climatic requirements, electromagnetic standards compliance statements, safety standards compliance statements, etc. Environmental Conditions Storage Conditions Duo PCIe/4 The following requirements are applicable only when the product is not powered, for instance, during storage conditions: Conditions Ambient air temperature Ambient air humidity Non-condensing Min Max Units - [-67] [] C [ F] % RH Min Max Units [] C [ F] -4 [-4] 8 [8] C [ F] % RH g Operating Conditions Duo PCIe/4 The following requirements are applicable when the product is in operation: Conditions FPGA die temperature Ambient air temperature Conduction-cooling Ambient air humidity Non-condensing Shock amplitude All axes ms duration Half-sine and saw tooth pulse shapes Important: The ambient air temperature specification applies to any point in the vicinity of the module including the gap between modules of the PCIe/4 stack. Important: The thermal design of the host PC must ensure that, at any time, the FPGA die temperature never exceeds the recommended limit. Danger: Exceeding the upper limit of the FPGA die temperature can permanently damage the card. Note: The Coaxlink cards are equipped with a temperature sensor that reports the temperature of the FPGA die. Note: An event is reported to the application when the FPGA die temperature reaches the limit.

31 Environmental Specification Coaxlink Hardware Manual PCIe/4 products Thermal Design Heat sources Duo PCIe/4 The main contributors are the electronic devices of the main card. This includes the losses of the power converters of the main power distribution network. Estimated heat power [W] Product 64 Coaxlink Duo PCIe/4 Main Others Total Heat Extraction Duo PCIe/4 The heat produced by the board is conducted to the chassis enclosure using a heatsink such as the Thermal drain (Model ) for Coaxlink Duo PCIe/4 The thermal design of the PCIe/4 system must ensure an adequate cooling of the enclosure to keep the FPGA die temperature and the ambient air temperature below the upper limits of the allowed temperature range. The application is responsible for regularly checking the temperature and for taking the appropriate action in case of excessive temperature. CE Compliance (EMC Class B) Notice for Europe This product is in conformity with the Council Directive 4//EU This equipment has been tested and found to comply with EN/CISPR and EN4/CISPR4. To meet EC requirements, shielded cables must be used to connect a peripheral to the card. This product has been tested in a typical class B compliant host system. It is assumed that this product will also achieve compliance in any class B compliant unit. FCC Compliance (Class B) Notice for USA Compliance Information Statement (Declaration of Conformity Procedure) DoC FCC Part This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation or when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.

32 Coaxlink Hardware Manual PCIe/4 products Environmental Specification Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected. Consult the dealer or an experienced radio/t technician for help. RoHS Compliance This product is in conformity with the European Union RoHS /6/EU Directive, that stands for "the restriction of the use of certain hazardous substances in electrical and electronic equipment". WEEE According the European directive /9/EU, the product must be disposed of separately from normal household waste. It must be recycled according to the local regulations.

33 Related Products & Accessories Coaxlink Hardware Manual PCIe/4 products Related Products & Accessories CC-Link Ribbon Cable Accessory product used for Intra-PC CC-Link interconnection. CC-Link Ribbon Cable A, B, C & D connectors: x -pin.4 mm pitch IDC plugs A B 6 mm C D 6 mm L = mm The CC-Link Ribbon Cable is a 6-conductor.-in pitch ribbon fitted with 4 6-pin female ribbon cable connectors. This cable is used for interconnecting the CC-Link connectors of up to 4 cards located in the same PC. Custom CC-Link Ribbon Cable Assembly Assembly instructions of a custom-made IntraPC CC-Link interconnection. Cable length Polarization key 6 wires."." Connector pitch Pin The cable assembly is composed with: A piece of a 6-conductor.-in pitch ribbon cable. For instance: Belden s (9L8XX Series). Two or more pieces of a x -pin female ribbon cable connectors. For instance: TE connectivity The cable assembly has:

34 Coaxlink Hardware Manual PCIe/4 products Related Products & Accessories A maximum of 4 connectors allowing up to 4 cards to share the same CC-Link. A maximum length of 6 cm. The connector pitch(es) must be determined according to the actual card to card spacing in the Host PC. 4

HARDWARE MANUAL. Coaxlink Coaxlink Duo PCIe/104. EURESYS s.a Document version built on

HARDWARE MANUAL. Coaxlink Coaxlink Duo PCIe/104. EURESYS s.a Document version built on HARDWARE MANUAL Coaxlink 64 Coaxlink Duo PCIe/4 EURESYS s.a. 6 - Document version..4 built on 6-7-9 EURESYS s.a. shall retain all property rights, title and interest of the documentation of the hardware