ELPI+ N1312 HTELPI+110 HTELPI+230 N1393 N1393B IA-904 IA-905 IA-906 N1334 N1333
|
|
|
- Ethelbert Woods
- 5 years ago
- Views:
Transcription
1 ELPI+ Product Catalogue ELPI+ Unit Incl. ELPI+ unit as in the picture, carry case for the ELPI+, vacuum hose, 3 pcs of NW16 clamps and gaskets, extra charger needle, Powercord, RS-232 data cord, USB - RS-232 adapter, impactor collection plate tool, tweezers, Al foils (300pcs, CF-300), Apiezon-L grease (10g, AG-10), impactor leakage test tool, sample hose (2m, IPR-212), NW16-3/8" connector (IPR-110) 2pcs, Tube connector for ELPI+ inlet, USB memory (incl. ELPI+ setup files, ELPI+VI measurement software, ELPI+XLS data processing spread sheet), ELPI+ and ELPI+VI Manuals, Calibration data sheet. ELPI+ Spare Impactor and Charger unit N1312 is intended for use as ELPI+ spare impactor only. For existing users, please inform the serial number of the ELPI+ together with the purchase order. ELPI+ N1312 High Temperature ELPI+ (HT-ELPI+ ) 110 V 230 V ELPI+ upgrade to HT-ELPI+, 110 V ELPI+ upgrade to HT-ELPI+, 230 V HTELPI+110 HTELPI+230 N1393 N1393B High Resolution ELPI+ Includes HR-ELPI+VI software and firmware. HRELPI+ PUMPS Vacuum Pumps DP25 230V/50 Hz EUR, for 10 LPM and 30 LPM impactor DP25 100V/50 Hz JPN, for 10 LPM and 30 LPM impactor DP25 115V/60 Hz USA, for 10 LPM and 30 LPM impactor IA-904 IA-905 IA-906 w IMPACTOR PARTS O-ring set for ELPI+ impactor Includes 30pcs of O-rings for ELPI+ impactor 1 O-ring N1334 N1333 Dekati Ltd DEKATI Ltd, Tykkitie 1, FI KANGASALA, FINLAND tel +358(0) , sales@dekati.fi
2 Insulator ring set for ELPI+ impactor Including 15 pcs of PEEK insulators for the impactor N1321 Substrate holder ring set for ELPI+, 14 pcs Substrate holder ring for ELPI+, 1 pcs N1331 N1332 Impactor collection plate set, 14pcs Includes 14pcs of ELPI+ impactor collection plates and a storage case N1322 Sintered collection plate set, 14 pcs ELPI+ inlet part with gasket N1315 Leakage test tool N1335 Substrate positioning tool For easy positioning of the substrate holder ring N1317 Tweezers IPR-403 Dekati Ltd /6
3 ELPI+ filter stage block N1268 CHARGER PARTS Corona needle assembly ELPI+ charger corona needle incl. PEEK insulator N1188 Corona needle N1281 Charger HV BNC connector Charger HV BNC connector for charger side N1313 Charger Trap BNC connector Charger Trap BNC connector for charger side N1314 Viton O-ring set for the charger Viton O-ring set for the charger, incl. 2pcs large and 1pcs small O-rings Large O-ring for the ELPI+ charger Small O-ring for the ELPI+ charger N1338 N1337 N1336 ELPI+ flush tube N1318 Charger HV cable with connector N1342 Charger Trap cable with connectors N1343 ELPI+ flush tube connector N1339 Dekati Ltd /6
4 ELPI+ CONSUMABLES COLLECTION SUBSTRATES Aluminium foils, 300 pcs, Ø25 mm Collection foils for ELPI+ impactor stages CF-300 Greased aluminium foils, 100 pcs, Ø25 mm Collection foils for ELPI+ impactor stages, greased with Apiezon-L CFG-225 Polycarbonate collection foils, 100 pcs, Ø25 mm Collection foils for ELPI+ impactor stages, suitable for chemical analysis IPR-200 SUBSTRATE GREASING Apiezon-L grease Impactor foil grease 10 g including mixing jar 1:20 AG-10 Dekati Collection Substrate Spray For fast greasing of the the collection substrates. Stencil not included. Hazardous material, needs special packaging/transportation. DS-515 Dekati 25 mm stencil For greasing of 15 foils at one time with Collection Substrate Spray DS-125 Apiezon-H grease Impactor foil grease 25 g, max 200 C AG-25 Dekati Ltd /6
5 Collection foil keeper, 25mm, 14 pcs CFC-260 OTHER PARTS Flush pump filter for ELPI+ IPR-600 ELPI+ Power supply N1341 Serial cable, 1.8 m IPR-509 USB-Serial Adapter for Dekati Instruments To connect ELPI+ to a computer through USB port ELA-443 Pump Oil for Leybold Vacuum pump, 2 ltr IA-921 ELPI+ carry case N1340 Gasket NW16 with central ring IPR-504 Dekati Ltd /6
6 Clamp for NW16 flange IPR-503 O-ring for ELPI+ impactor outlet IPR-534 NW 16-3/8" IPR-110 Tube connector 3/8"-12mm IPR-101 High temperature vacuum hose including pressure valve and NW16 flange connectors with 2m hose with 3m hose High Temperature vacuum hose including NW16 flange connectors (no valve), clamp and gasket 1m hose 2m hose 3m hose Sample hose for particle sampling, 1 m Different lengths available IA-222 IA-223 IA-322 IA-322a IA-322b IPR-212 Impactor tightening screw, 1pcs IPR-931 Dekati Ltd /6
Spare part catalogue GB 03/2007. Wall-hung boilers ecotec exclusive 832, 838 VUW 326/4-7 VUW 386/4-7
Spare part catalogue 0020037555.03 GB 03/2007 Wall-hung boilers ecotec exclusive 832, 838 VUW 326/4-7 VUW 386/4-7 Content General view of sheet Page 3 04 Burner Page 4 06 Heat exchanger Page 6 07 Casing
EPX2555 Advantage Series Piston Pump
EPX Advantage Series Piston Pump Owner s Manual Do not use this equipment before reading this manual! Model Numbers: 00 Upright Cart Complete 00 Low Boy Cart Complete NOTE: This manual contains important
Cool Drawer Dual Sensor
The Cool Drawer Dual Sensor is designed for use in critical processes where it is desirable to have a second crystal in the vacuum chamber. Water cooled, cast stainless steel sensor body, two Cool Drawer
Oval Gear Meter OGM PLUS
Precise volume measurement Reliable process control High-grade materials Resistant to chemicals Not affected by changes in viscosity Elados EMP pump coordinated flow rates Direct connection to an EMP E60
ASXPRESS PLUS Rapid Sample Introduction System Quick Installation Guide
ASXPRESS PLUS Rapid Sample Introduction System Quick Installation Guide Manual Part Number 610092 Rev 8 ASXPRESS PLUS Quick Installation Guide You can and should arrange for expert installation of the
Installation Note for Isocratic-to- Quaternary Pump Upgrade Kit G1352A
s1 Installation Note for Isocratic-to- Quaternary Pump Upgrade Kit G1352A In this note we describe how to install the isocratic-to-quaternary pump upgrade kit into an Agilent 1100 Series isocratic pump.
Sputtering Sensor ADVANTAGES
The INFICON is specifically designed for use in any sputtering process. The sensor body and cooling tubes are gold plated beryllium copper for maximum cooling efficiency in the sputtering environment.
The following forms are included. Computer files are contained in the directory v:\aqg_ops\improve\field_information\mailaudt. 1point.
TI 201B Forms for Flow Audits by Site Operators The following forms are included. Computer files are contained in the directory v:\aqg_ops\improve\field_information\mailaudt date initials 1point.doc 10/20/95
FILTER NAME CONSTRUCTION FEATURES APPLICATIONS ORDER CODE MEMBRANE Body: polycarbonate Filter: PTFE membrane
Filter Caps for Humidity and Dewpoint Transmitters with probe 12 mm (0.47 ) The right choice of appropriate filter cap is essential for best long term performance in the application. For assistance please
2-1. the ESI Probe Assembly. the PEEK Safety Sleeve and Sample Tube to the ESI Probe
You tune and calibrate your LCQ Advantage in ESI mode before you acquire data in either the ESI or the APCI mode. This chapter contains the following topics:.removing.connecting.installing.setting.setting
QUICK-START GUIDE. Quick Start Guide Temperature Controlled QCM Cell WHAT DOES GAMRY SOFTWARE DO?
www.gamry.com 1-215-682-9330 techsupport@gamry.com We have a variety of resources available to help you get started. Feel free to visit our website to find out more information on: Application Notes -
GPX 1250 Gas Piston Pump
GPX 0 Gas Piston Pump Owner s Manual Model Number 0000 SprayTECH 0 Fernbrook Lane Minneapolis, MN Technical Assistance: -00-- Order Entry: -00--00 Fax: -00--0 www.spraytechinc.com Printed in the U. S.
Flow VA 500/
VA 500/ 520 Verbrauch 79 What are the advantages of the flow measuring technology of CS Instruments? 1) 500 is mounted by means of a standard 1/2 ball valve. During mounting and dismounting the safety
Spraying device LD/U2E Arc spraying. Parts List PL EN 02
Arc spraying Parts List PL 9697 EN 02 Oerlikon Metco 6/2015 Oerlikon Metco AG Switzerland Rigackerstrasse 16 CH-5610 Wohlen +1 56 618 81 81 +1 56 618 81 00 www.oerlikon.com/metco i Warranty Disclaimer
Online version - not for reprint
(0) A Crankcase, Cylinder... X Tools, Extras... B Rewind starter... C Rewind starter ErgoStart... D Muffler... E Ignition system, Clutch... F Engine housing (Wrap around handle)... G Engine housing (Wrap
BG 240. Spare parts list. Trowel. Valid from serial number Atlas Copco Construction Tools AB No c
BG 0 Spare parts list Trowel BG0 HSQP BG0 HSQP BG0 HSTP BG0 HSTP Valid from serial number BGB00000 BGB00000 BGF000000 BGF000000 0 Atlas Copco Construction Tools AB No. 900 0 0c 00 BG 0 Contents Contents
Flow. Order number VA 550. Order no. VA 570. Further accessories A_...M_
Order number VA 550 housing High-pressure rig for VA 550 recoended for mounting from 10 to 100 bar Order no. 0695 0550 A_...M_ 0530 1155 Order no. VA 570 Order no. 0695 0570 0695 0571 0695 0572 0695 0573
Application The DA03 serves as indicator of differential. Follow mounting instructions in accordance to application.
DA03 Differential Pressure Gauge / Differential Pressure Gauge and Switch Models for Assignment in Explosion-hazardous Areas per Directive 94/9/EC (ATEX) Application The DA03 serves as indicator of differential
Front Load Single Sensor
INFICON Front Load Single crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The front load design allows for easy insertion of
Encore XT Manual Gun Upgrade Kit
Instruction Sheet P/N 1600823-01 Encore XT Manual Gun Upgrade Kit 1600834 Introduction Follow these instructions to upgrade your Encore manual spray gun to the improved design of the Encore XT spray gun.
SPARE PARTS LIST CP COMPRESSOR. Model CPD CPD 75
SPARE PARTS LIST CP COMPRESSOR Model CPD 75-00 EN 05 0 5 CPD 75 CONTENTS Title Page MAINTENANCE HOW TO READ THIS SPARE PART LIST? MAINTENANCE KITS STANDARD UNITS MOTOR-COMPRESSOR UNIT -7 AIR CIRCUIT -9
Beam Position Monitor For High Energy Particle Beams
Beam Position Monitor For High Energy Particle Beams Features 16 by 16 strip ionization chamber sensor High vacuum compatible Small insertion length (152.4 mm) Robust thin steel foil vacuum windows Very
Penetration: Penetrometer PNR 12 (Bitumen)
Penetration: Penetrometer PNR 12 (Bitumen) Standards depend on the selected accessories ASTM D5, EN 1426, JIS K 2207 Product group(s): User group(s): Scope: Consistency & Ductility Airports & Aviation,
LH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio
Forward and reversible plate Hatz Electric start 0 mm Hatz Electric start 0 mm Bio Hatz Electric start mm Bio Valid from serial number 0000 0000 0000 Contents Contents General information.....................................................................................................................................
LH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio
LH 00 Spare parts list Forward and reversible plate LH 00 Hatz Electric start 0 mm LH 00 Hatz Electric start 0 mm Bio LH 00 Hatz Electric start 0 mm LH 00 Hatz Electric start 0 mm Bio Valid from serial
UPGRADE PROGRAM. V70 Series Pumps vs V81T Series Pumps
VARIAN vacuum technologies UPGRADE PROGRAM V70 Series Pumps vs V81T Series Pumps Technical Memo Technical Memo - 1 - V70 series vs V81-T INDEX Outline drawings ISO63 3 Outline drawings CF2-¾ 4 Outline
HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0215
HERZ STRÖMAX 7GM/GML/GR HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0 H Rp L SW L L Dimensions in mm
Front Load Single Sensor
INFICON Front Load Single crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The front load design allows for easy insertion of
ARA FTS Flow Calibrator. Operation Manual August 1, 2016
ARA FTS Flow Calibrator Operation Manual August 1, 2016 TABLE OF CONTENTS SECTION PAGE 1. INTRODUCTION 1 2. GETTING STARTED 1 2.1. Navigation 1 2.2. Charge Battery 1 2.3. Set Date and Time 2 2.4. Plug-In
Hoshizaki America, Inc.
Hoshizaki America, Inc. Low-Profile Modular Crescent Cuber Models KML-351MAH KML-351MWH A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71267 Issued: 5-9-2008 Revised: 10-13-2014
Clamping Device, Series 2709
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Clamping Device, Series 2709 Technical data Pneumatic Open mechanism Technical Data Type Power transmission
FOR JEOL MICROSCOPES SYSTEM CONFIGURATION SHEET STANDARD CONFIGURATION OPTIONAL EXTRAS U-DB-JU A-SH-JU
STANDARD CONFIGURATION A-SH-JU S3 A-DH-JU D6 SAMPLE HOLDER Including one demo Nano-Chip for installation NANO-CHIP STARTER PACK Twenty Heating Nano-Chips XT, SiNx window HOLDER STAND LAPTOP & SOFTWARE
Checklist for the SMPS & CPC (5.400 & 5.500) PART 1 Setup of the external Plumbing (for the DMA and the CPC):
Checklist for the SMPS & CPC (5.400 & 5.500) PART 1 Setup of the external Plumbing (for the DMA and the CPC): Checklist uses laptop as an external control device (ACER, aspire 1400) and the long DMA (Vienna-type
Agilent 6400 Series. System. Installation Guide. Agilent Technologies
Agilent 6400 Series Triple Quad LC/MS System Installation Guide Agilent Technologies Notices Agilent Technologies, Inc. 2006-2010 No part of this manual may be reproduced in any form or by any means (including
14 Pressure Measurement. Measuring Devices Description Pressure range Connection Device Page
Measuring Devices Pressure range Connection Device Page Digital display mounting, für niedrige Drücke 0 2. mbar / 2. bar 4 mm tube MPV, MPA.02 portable, hand-operated 0 1 mbar / 10 bar 4 mm tube MHA.03
Penetration - Bitumen Method - PNR 12 (automatic)
Penetration - Bitumen Method - PNR 12 (automatic) Standards depend on the selected accessories ASTM D 5, DIN 52010 (obs.), EN 1426, EN 13179-2, EN 13880-2, JIS K2207, AASHTO T49 Product group(s): Bitumen,
15 and 16 Series BSP and hose fittings
SP and hose fittings > > Port size: M5, 1/8... 1 > > xtensive range of shapes and sizes including manifolds > > High temperature and pressure copper sealing washers supplied with ISO threads Technical
Front Load Dual Sensor
INFICON Front Load Dual crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The dual sensor provides a backup crystal and is essential
Sensyflow FMT200-ECO2 Thermal Mass Flowmeter
Data Sheet Rev. C Sensyflow FMT200-ECO2 Thermal Mass Flowmeter Direct mass flow measurement of air No additional pressure and temperature compensation required Mass flow or standard volume flow measuring
Electrical Test voltage (Vrms) Service sea level at m M I II
Applications Compact profile and high density connectors for all military and aeronautical purposes Standards MIL-C 38999 Series II - QPL approved NFC 93422 HE 309 VG 96912 series II PAN 6433-1 BS 9522
Front View. Right Section View. Back View. Assy. Number Assy. Description A Control unit, MDU. Date 08.
18 av 94-2013-11-05 Front View Right Section View Back View 2011-10-14 Date 08 Revision Drawn KRT 6400007 Control unit, MDU 1:2 19 av 94-2013-11-05 1 Tighten lens nuts very carefully, lenses break easily
DIP. Spare parts list. Centrifugal pumps 25, 25-US, 35, 35-US, 65, 65-US Atlas Copco Construction Tools AB No c
DIP 5, 5US, 35, 35US, 65, 65US Spare parts list Centrifugal pumps 0 Atlas Copco Construction Tools AB No. 9800 5 0c 003 DIP 5, 5US, 35, 35US, 65, 65US Contents Contents General information................................................................
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and gold plated contacts available High
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and contacts available High performance insulation material General characteristics and technical
Assembly and Maintenance
Assembly and Maintenance Assembly and Maintenance Test Pumps Pressure Test Pumps Tests all types of installations such as heating, compressed air and refrigeration systems, oil installations, fire lines
UHV Feedthrough, Conflat compatible flange. UHV female cable assembly, , PEEK connector and Kapton insulated coaxial
Coax-D Subminiature-D Coax-D Subminiature-D Accu-Glass 1, 3 and 5 Pin Feedthroughs UHV Feedthrough, 100520 Conflat compatible flange UHV female cable assembly, 100640, PEEK connector and Kapton insulated
D5132 US. Base and related parts
D5132 US Base and related parts 135 101 142 102 140 119 141 137 140 134 105 133 148 111 108 125 ASKO, D5132 US - SS (DW70.5) Pos Spare part No. Description Qty Comment 101 8801387 BOTTOM OUTER COMPL. 1
EB7650TH 76CC BACKPACKER BLOWER 4-STROKE
10-2014 EB7650TH 76CC BACKPACKER BLOWER 4-STROKE 49 50 48 52 53 51 A09 31 32 45 44 43 47 46 39 41 30 33 34 35 37 36 38 27 28 29 5 6 7 8 10 11 12 13 15 17 16 18 19 14 2 1 20 21 55 22 23 24 239 238 A08 56
Industrial pressure controller Model CPC4000
Calibration technology Industrial pressure controller Model CPC4000 WIKA data sheet CT 27.40 Applications Oil and gas industry Industry (laboratory, workshop and production) Transmitter and pressure gauge
High Density Connectors Multipin and MS Multipin MS High Current and High Voltage
Multipin is the description for electrical feedthroughs which have two or more conductor paths, and include connectors for one or both sides. This series is typically used for transmission of low power
fpl=^a^mqbo pi=^a^mqbo _~ëáå=^a^mqbo oéé~áê=fåëíêìåíáçåë
fpl=^a^mqbo pi=^a^mqbo _~ëáå=^a^mqbo oéé~áê=fåëíêìåíáçåë A Contents ISO ADAPTER 1 Disassembly... 4 2 Assembling the handpiece holder... 5 3 Assembling the adapter, compl... 6 4 Function check... 7 5 Spare
Ultra High Efficiency (ef) Series 60 and 100 Gallon Models
COMMERCIAL GAS REPLACEMENT PARTS LIST Ultra High Efficiency (ef) Series 60 and 100 Gallon Models Includes Hydrojet Total Performance System Including: 100 Gallon Top Water Connections 100 Gallon Side Water
Indicating Digital Transmitter for Differential Pressure and Flow. Media 6 with LCD Media 6 with LED
Indicating Digital Transmitter for Differential Pressure and Flow Media 6 with LCD Media 6 with LED Application Microprocessor-controlled transmitter for measuring and indicating the differential pressure
Gas detection just got personal
Gas detection just got personal Part of the ersonal urveyor range Coloured 'rubber boot' for multi-site or multi-application working (7 colours available) Simple 1-button operation Any combination of (LEL/O
Model VDL 115 Vacuum drying chambers for flammable solvents
Model VDL 115 Vacuum drying chambers for flammable solvents A BINDER safety vacuum drying oven of the VDL series ensures maximum safety when drying organic solvents standard with TÜV/GS. The inner chamber
Pressure control valves type B
Pressure control valves type B Burner Components Catalogue 1 Contents Application... page 2 Design... page 2 Exploded view... page 2 Function... page 2 Technical data... page 3 p-q table... page 3 Dimension...
Model QRS CPVS
SPARE PARTS LIST EN CP COMPRESSOR Model QRS 0-5 - 0 CPVS 0-5 - 0 6 05 50 65 KEY - Door Panel: 655900 Lock - Door Panel: 005076 QRS 0 CONTENTS Title Page MAINTENANCE HOW TO READ THIS SPARE PART LIST? KIT
Parts Diagrams and Lists
SC351 Parts Diagrams and Lists www.crescentindustrial.co.uk TABLE OF CONTENTS GENERAL VIEW 1 COVER AND TANKS 3 FRAME SYSTEM 5 HANDLE SUPPORT SYSTEM 7 HANDLE SYSTEM 9 MOTOR AND DECK SYSTEM 13 BRUSH DECK
ProcessCalibrator Model CPH6000
Calibration technology ProcessCalibrator Model CPH6000 WIKA data sheet CT 15.01 Applications Calibration service companies/service industry Maintenance facilities Measurement and control laboratories Quality
i-gastra 7200 Gas Permeability Tester
i-gastra 7200 Gas Permeability Tester Online Data Management System for Packaging Testing-The ultimate cloud computing technology for test data processing and management Designed with embedded computer
Cool Drawer Single Sensor
The Cool Drawer Single Sensors allow crystal installation into the sensor from the side, convenient for systems with insufficient room for front load crystal installation. The Cool Drawer Single Sensor
Robust Clamps Shock-proof load range
Robust Clamps Shock-proof load range Your application takes centre stage Robust Clamps Stainless steel Features: Extremly strong Vibration proof Impact and shock load... specific demands require specific
Instruction Manual. M Pump Motor Controller. For file reference, please record the following data:
Instruction Manual M Pump Motor Controller For file reference, please record the following data: Model No: Serial No: Installation Date: Installation Location: When ordering replacement parts for your
OPERATING MANUAL FOR MASTERMAG
OPERATING MANUAL FOR MASTERMAG PARAS Electromagnetic flowmeter s accurately measures the flow rate of conducting liquids or slurries flowing in closed pipes. Due to simple and right design the flowmeter
Precision digital pressure gauge Model CPG1500
Calibration technology Precision digital pressure gauge Model CPG1500 WIKA data sheet CT 10.51 for further approvals see page 4 Applications Oil and gas industry Maintenance and service facilities Calibration
Interface I-300 / I-300 Pro Technical data sheet
Interface I-300 / I-300 Pro Technical data sheet The Interface I-300 or I-300 Pro are the central control unit for all process parameters of a Rotavapor R-300 system: rotation speed, temperature (heating
IDRO TEKNA HR 2015LP 400/50 TS (HYPER TR) C/ACCUM. TEST.NICHEL.
IDRO TEKNA HR 2015LP 400/50 TS (HYPER TR) C/ACCUM. TEST.NICHEL. Content filters: validity 8.623.0939 - IDRO TEKNA HR 2015LP 400/50 TS (HYPER TR) C/ACCUM. TEST.NICHEL... 3 R56010571-1 - MOTORPUMP... 4 R56090183-2
Compressed air quality meas. according to ISO 8573 Residual oil content - particles - moisture
Compressed air quality meas. according to ISO 8573 Residual oil content - particles - moisture Residual oil content measurement OIL-Check 400 For permanent and highly precise measurement of the vaporous
SIDEPAK AM510 Personal Monitor
SIDEPAK Personal Monitor The SIDEPAK Personal Monitor for industrial hygiene and safety professionals displays and data logs concentration in real time. The rugged, belt-mountable laser photometer is compact
CF-38, CF-80 and CF-100 Gallon Models
COMMERCIAL OIL FIRED REPLACEMENT PARTS LIST CF-38, CF-80 and CF-100 Gallon Models Includes Hydrojet Total Performance System Effective: April, 2007 ECO 7181 NOTE: BOTH MODEL AND SERIAL NUMBERS ARE REQUIRED
Mechanical accessories
Bearing box Part no. 01209010, 01209029 Part no. 01209010 01209029 Shaft size Ø 15 mm Ø 10 mm Shaft load max Radial: 250 N, Axial: 150 N Speed max 4000 rpm Protection class IP 64 according to IEC 60529
Maria Splitt Only for informational purpose, will not be replaced in case of changes Print Date: 1/23/2013 1:01 PM Z-No Mat-No. Change Master Quantity Unit Description Specification Order Type Status 1
Removal and Installation8
8 Screw Types 8-4 Top Cover Assembly 8-5 Left Hand Cover 8-6 Right Hand Cover 8-10 Front Panel Assembly 8-14 Left Rear Cover 8-15 Right Rear Cover 8-16 Extension Cover (60" Model only) 8-17 Media Lever
Customer Information. Service Engineer s Responsibilities. Additional Instruction Notes. Agilent 6230B Series TOF LC-MS System Installation Checklist
Thank you for purchasing an Agilent instrument solution. This checklist is used by the installing engineer to ensure that the instrument and associated systems are correctly installed, upgraded and functioning
Catalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group
Catalogue 2016 HOSE TECHNOLOGY Fittings, Valves and Accessories Schauenburg Hose Technology Group PREAMBLE The new fittings and accessories range of APD Petzetakis Schlauchtechnik GmbH Quality and reliability
ULTRASONIC TRANSIT TIME FLOWMETERS TTFM100-NG SERIES
Water treatment, slurry and process water pumping; Flow balancing; Hydro-electric, cooling, anti-fire stations; ULTRASONIC TRANSIT TIME FLOWMETERS TTFM100-NG SERIES The Transit Time Flow Meter of TTFM100
Introduction. Available materials. Aluminum Carbon Steel Stainless Steel Ductile Iron Special Materials on Application
VALVES & CONTROLS VAREC 00B/00B The Varec 00B/00B protects tanks from damage or deformation, and minimizes emissions to the environment, as well as loss of product due to evaporation. Introduction 00B
RealFlow Digital Oil Flow Meter for paper machines
RealFlow Digital Oil Flow Meter for paper machines The RealFlow digital oil flow meter is specially designed for measuring and monitoring in a paper machine environment. The RealFlow unit measures and
Interface I-300 / I-300 Pro Technical data sheet
Interface I-300 / I-300 Pro Technical data sheet The Interface I-300 or I-300 Pro are the central control unit for all process parameters of a Rotavapor R-300 system: rotation speed, temperature (heating
D3731 XL US. Base and related parts
D3731 XL US Base and related parts 122 121 115 114 150 101 142 135 149 138 128 102 119 136 141 144 111 116 134 105 133 125 108 118 157 148 106 ASKO, D3731 XL US - SSHDNL (DW20.4) Pos Spare part No. Description
HOW TO ORDER SWIVEL JOINTS
HOW TO ORDER SWIVEL JOINTS Emco Wheaton offers a wide variety of swivel joints to fit almost any application. In order to assist you in ordering the Correct swivel joint, we have developed a guideline
ULTRASONIC TRANSIT TIME FLOWMETERS TTFM100-NG SERIES
Water treatment, slurry and process water pumping; Flow balancing; Hydro-electric, cooling, anti-fire stations; ULTRASONIC TRANSIT TIME FLOWMETERS TTFM100-NG SERIES The Transit Time Flow Meter of TTFM100
Operating Instructions Drill rigs DRU400 DRA400
Operating Instructions Drill rigs DRU400 DRA400 Index 001 Original operating instructions 10988838 en / 12.05.2017 Congratulations! With a Hydrostress unit from TYROLIT you have chosen a tried and tested
Rosemount 1595 Conditioning Orifice Plate
Reference Manual Rosemount 1595 Conditioning Orifice Plate www.rosemount.com Reference Manual Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate NOTICE Read this manual before working with the product.
Q-Flow product information. Variable area flowmeters for gases and liquids
Q-Flow product information Variable area flowmeters for gases and liquids MyScale Air mm ALU Attractive design and price: Variable area flowmeters Q-Flow The proven variable area flowmeter with compact,
Connect - Contact - Control. Multifunctional adapters for LV160 and LV320 Series charging connectors A 841.en
Connect - Contact - Control Multifunctional adapters for LV160 and LV320 Series charging connectors 110 37 61 90.5 A 841.en 2 Multifunctional adapters for LV160 and LV320 Series charging connectors Modular
9. SPARE PARTS -43- STEAM SYSTEM (OPTION ONLY) Steam Switch Water Solenoid
9. SPARE PARTS PART NO DESCRIPTION CONTROLS 021473 Switch - Power 024562 Power Relay (From S/N 232054) 024563 Power Relay Upgrade Kit (To S/N 232053) 017121 Thermostat 020823 Knob - Thermostat / Bake Timer
SPECIFICATION SHEETS REV:12 / APRIL 10
SPECIFICATION SHEETS REV:12 / APRIL 10 2 BT Soldering stations PAG.4 BD Soldering stations 5 CD-A Soldering stations 6 CF-A Soldering feed stations 7 CP-A Micro tweezer Station 8 CS/CV Desoldering stations
SV81H Safety and Relief Valve
Page TID BR Rev.0 UV SV8H Safety Relief Valve Description The SV8H have fied blowdown.no blowdown adjustment required when setting or testing the valve.it is designed for short blowdown on all medias.
PLATINblue MSQ Plus. Connection Guide V6951A UHPLC/HPLC. Mass spectrometry
PLATINblue MSQ Plus Connection Guide V6951A UHPLC/HPLC Mass spectrometry 3 Table of contents Note: For your own safety, be sure to read the manual and always observe the warnings and safety information
Nuclear Power Generation Range 8N45 SERIES. Reactor Containment Certified Connectors
Nuclear Power Generation Range 8N45 SERIES Reactor Containment Certified Connectors 1 8N45 SERIES Product Overview 8N45 Product Keys Description: Class 1E qualified connectors Quick connect ¼ turn bayonet
RS-FS-N01 Wind speed transmitter user's Guide (485type)
RS-FS-N01 Wind speed transmitter user's Guide (485type) Issue: V1.0 1 2 Context 1. Introduction... 4 2. Installation instructions...5 3. Configure the software installation and use... 6 4. Communication
3000M UT Page 1 of 28 Air Cleaner
3000M UT-26021 Page 1 of 28 Air Cleaner 3000M UT-26021 Page 2 of 28 Air Cleaner Ref # Part Number Qty S/P/F Description 175 GM240308 1 CLEANER ASSY Includes ref 178 thru 182 176 GM002811 1 SCREW & WASHER
HV-STYLVENT Series WALL OR WINDOW EXTRACT FANS HV-STYLVENT. Wall or window extract fans. Elegant design harmonising with any environment
WALL OR WINDOW EXTRACT FANS Series Complete range of axial flow fans for wall or window mounting applications. All the fans are supplied with tough ABS plastic grilles, shutter and single phase V- 5Hz
Series P215PR/RM Direct- and Remote-Mount Pressure-Actuated Condenser Fan Speed Controllers for Single-Phase Motors
European Refrigeration Controls Catalogue Catalogue Section 4 Product Bulletin P215PR/RM Issue August 2016 Series P215PR/RM Direct- and Remote-Mount Pressure-Actuated Condenser Fan Speed Controllers for
AEROTRAK PORTABLE AIRBORNE PARTICLE COUNTER MODEL 9310/9350/9510/9550/9500 QUICK START GUIDE
AEROTRAK PORTABLE AIRBORNE PARTICLE COUNTER MODEL 9310/9350/9510/9550/9500 QUICK START GUIDE Thank you for purchasing a TSI AeroTrak Portable Airborne Particle Counter (particle counter). This guide will
Fibox Tempo Junction box NEW. Protection in demanding environments
Junction box NEW Protection in demanding environments IP 65 Tempo Enclosed in seconds! As its name suggests, Tempo doesn t like to hang around. Need an enclosure that s easy on the pocket and installed
USER S MANUAL. TurboCharger Analyser Compact
USER S MANUAL TurboCharger Analyser Compact USE OF THE ORIGINAL EXHAUST (TURBINE HOUSINGS) FOR BEST TEST SIMULATION SIMPLE TO WORK WITH TO REDUCE THE TESTING TIME AMPLE AND WELL-LIT WORK AREA INDEX Introduction
GD 5, GD 10, GD 5 Battery
Model: GD 10 BACK GD 5 BACK Part List US-English Table of Contents Motor and motor parts 3 Electrical parts 5 Container parts 7 Straps parts 9 Filters 11 Nozzles 32 mm 13 Tubes, hose 32 mm 15 Overview
IOM Personal Sampler
Operating Instructions 863 Valley View Road, Eighty Four PA 15330 USA Tel: 724-941-9701 Fax: 724-941-1369 e-mail: skctech@skcinc.com IOM Personal Sampler Description The patented* IOM Sampler is a sampling
Inline filter. Features: RE 51402/09.10 Replaces: Types 100 FLEN 0160 to 0630; 100 FLE 0045, 0055, 0120
Inline filter RE 50/09.0 Replaces: 0.09 / Types 00 FLEN 060 to 060; 00 FLE 005, 0055, 00 Nominal sizes according to DIN 550: 060 to 060 Nominal sizes according to BRFS: 005, 0055, 00 Nominal pressure 00