CURRICULUM VITAE A. PERSONAL INFO. 1. Name DR. WAN ABD MALIK BIN WAN MOHAMED

Transcription

1 CURRICULUM VITAE A. PERSONAL INFO 1. Name DR. WAN ABD MALIK BIN WAN MOHAMED 2. Current Position Head, Technical Services and Metrology Advisory Section, National Metrology Laborary (SIRIM Berhad), Lot PT 4803, Bandar Baru Salak Tinggi, Sepang, Selangor Darul Ehsan Tel: Date of 02 January 1991 Appointment 4. Marital Status Married 5. Sex Male

2 B. EDUCATIONAL QUALIFICATION 1. Academic Qualifications Degree Field Year Award Name, Place of Institution PhD Pressure Metrology 2006 Loughborough University, United Kingdom Degree Field Year Award Name, Place of Institution Degree Field Year Award Name, Place of Institution BSc Electrical Engineering 1990 Seoul National University, South Korea Diploma Electrical Engineering (Communication) 1986 Universiti Teknologi Malaysia, Malaysia 2. Professional Qualifications Technical Assessor of Laboraries Based on ISO/IEC and ISO (Certified by: New Zealand Quality College) C. PROFESSIONAL WORK EXPERIENCE 1) Research Officer of Mass Laborary, Measurement Services Unit, Measurement Centre, SIRIM (Jan Jan. 1995) 2) Head of Mechanical Section (Mass, Dimensional, Force, Pressure & Torque), Sirim-Sime Technologies Sdn. Bhd. (Feb Aug. 1996) under secondment scheme 3) Senior Metrologist, Pressure & Vacuum Laborary, Mechanical Metrology Section, National Metrology Laborary (Sept Jan. 2010). 4) Head of Technical Services and Metrology Advisory Section, National Metrology Laborary (Jan present).

3 OTHER EXPERIENCES (INVOLVEMENT IN OTHER COMMITTEES/ TASK FORCE) 1) Life Member of Metrology Society of India (MSI) - LM 765 2) Graduate Engineer of Board of Engineers Malaysia (BEM) 52896a 3) Affiliate Member of Institute of Physics (IOP), United Kingdom ) Member of the Technical Committee of the Asia-Pacific Metrology Programme (APMP) - Mass and Related Quantities 5) Technical Assessor in Mass and Related Quantities under Skim Akreditasi Makmal Malaysia (SAMM), STANDARD MALAYSIA 6) Technical Consultant of SIRIM s ANGKASA Project (Assembly, Integration and Test Centre - AITC) for the Mass Property Measurement System 7) Member of Project Identification Task Force Self Constructed Asset under SIRIM s Flagship Programme 8) Project Leader (Pilot Laborary) of the APMP-DEC 100 MPa Hydraulic Pressure Intercomparison 9) Member of the Laborary Accreditation Evaluation Panel (LAEP) under Skim Akreditasi Makmal Malaysia (SAMM), STANDARD MALAYSIA 10) Representing Malaysia in Asia-Pacific Legal Metrology Forum (APLMF) Meetings and its related meetings 11) Representing Malaysia in ASEAN Consultative Committee on Standards and Quality (ACCSQ) and its related meetings 12) Representing Malaysia in Working Group 3 (Legal Metrology) and its related meetings (ACCSQ-WG 3) 13) Chairman of ACCSQ-WG 3 (January 2010 present) 14) Co-chair of the Task Force in Reviewing the Weights & Measures Act 1972 (Act 71) formed under a collaboration between Ministry of Demestric Trade, Cooperative and Consumerism & National Measurement Standards Laborary 15) Member of Jawatankuasa Bersama Metrologi Legal (JBML) formed under a collaboration between Ministry of Demestric Trade, Cooperative and Consumerism & National Measurement Standards Laborary 16) Member of SIRIM s Knowledge Management Team

4 E. FIELD OF EXPERTISE 1) Pressure Metrology 2) Mass Metrology 3) Legal Metrology F. PUBLICATIONS a) Refereed Journal 1. Wan Mohamed W A M and Petzing J N 2009 The development of novel interchangeable pisns for pressure performance optimization in a gas-operated dead weight pressure balance Metrologia Tokihiko Kobata, Hiroaki Kajikawa, Sakae Kimura, Mark Fitzgerald, Darrin Jack, Chris Sutn, Wan Abd Malik Wan Mohamed, Mohd Mazid Mansor and Chen Soo Fatt 2009 Final report on key comparison APMP.M.P-K7.1 in hydraulic gauge pressure from 10 MPa 100 MPa Metrologia b) Conference Contributions - Refereed 1. Wan Mohamed W A M and Petzing J N 2005 Investigating the influence of surface texture on the performance of gas operated Dead Weight Pressure Balances Proc. 4 th CCM Int. Conf. on Pressure Metrology from Ultra-High Vacuum Very High Pressures ( Pa) (London: Institute of Physics) pp Wan Mohamed W A M and Petzing J N 2006 Investigations in pisn-cylinder performance Proc. Engineering Measurement Awareness Network A Pressmet meeting: High Pressure Measurement (Manchester: DH-Budenberg) 3. Wan Mohamed W A M and Petzing J N 2006 The effects of rotational speed and rotational direction on he determined effective area of the 35 mm pisn cylinder assembly Proc. 6 th International Conference on Advances in Metrology (AdMet-06), PV2-06 (New Delhi, India) pp 81-82

5 c) Others - Conference Contributions and Articles 1. Wan Abd Malik Wan Mohamed 2001 Current status of the establishment of pressure and vacuum standards in Malaysia 1 st APMP Pressure & Vacuum Workshop, Meeting and Symposium (Tsukuba, Japan) 2. Wan Abd Malik Wan Mohamed 2001 Report on the 5-Nation Hydraulic Pressure Intercomparison (20 ~ 100 MPa) undertaken by Malaysia in st APMP Pressure & Vacuum Workshop, Meeting and Symposium (Tsukuba, Japan) 3. Wan Abd Malik Wan Mohamed 2001 The status of pressure metrology in Malaysia 2 nd International Pressure Metrology Workshop (2 nd Pressmet-2001) (New Delhi, India) 4. Wan Abd Malik Wan Mohamed 2006 Development of pressure standards Metrology News Issue 2/2006 (Shah Alam) 5. Wan Abd Malik Wan Mohamed 2008 Home-made pressure balances for industry SIRIM Link 1/2008 PP 10002/05/2008 (Shah Alam) d) Thesis Wan Mohamed W A M 2006 Analysis of surface texture and its affect on pressure balances PhD Thesis Loughborough University, UK G. AWARDS 1. SIRIM s Excellent Service Award, National Metrology Laborary s Best Metrologist Award, 2009 H. MAJOR TECHNICAL TRAINING COURSE ATTENDED No. Date Title of Training Location of Training Duration 1. 30/08/93 Mettler-Toledo Metrology Training (Mass Determination) i) Mettler-Toledo, Switzerland ii) Physikalisch-Technische Bundesanstalt (PTB), Germany 3 weeks

6 2. 24/11/93 Workshop On Mass Measurement And Calibration 3. 18/11/94 Workshop on Mass Metrology, Mass Standards And Comparar Balances 4. 29/03/95 ISO/IEC Guide 25 - Laborary Quality Manual Writing Course 5. 24/05/95 ISO/IEC Guide 25 - Internal Auditing Training Course 6. 24/07/95 Advanced Density And Mass Metrology Training 7. 24/08/95 In-House Mass Comparar Training 8. 24/04/96 In-House DH21710 Calibration System Training SIRIM, Shah Alam (by :- Mettler-Toledo, Switzerland) SIRIM, Shah Alam. (by :- Mettler-Toledo, Switzerland) SIRIM, Shah Alam (by :- SIRIM & RMTUV) SIRIM, Shah Alam (by :- SIRIM & RMTUV) i) Sarrius AG, Germany ii) PTB, Germany iii) Weight and Measure Department, Germany Sirim-Sime Technologies Sdn. Bhd. (by :- Sarrius, Germany) Sirim-Sime Technologies Sdn. Bhd. (by :- Desgranges et Huot, France.) 2 days 2 days 2 days 3 days 9. 23/09/96 27/7/98 As a counterpart in JICA Project for Pressure Measurement Training Course (2 years JICA project) SIRIM Berhad (by JICA expert : Mr. Ken Nishibata) 2 years /11/96 Training on Static Pressure Measurement & Training on RUSKA 2465 Gas-operated Deadweight Pisn Gauge RUSKA Instrument, Housn, USA &

7 11. 20/10/97 Maintenance And Dissemination Of Pressure Standards For International Intercomparisons National Measurement Laborary (NML), CSIRO, Australia 3 weeks /10/98 17/12/98 JICA Individual Training Course on Pressure Standards and Measurement Technology i) National Research Laborary of Metrology (NRLM), Japan ii) Nagano Keiki Co. Ltd., Japan iii) Okano Works Ltd., Japan 4 weeks 4 weeks /10/99 Swagelok Installation Training Kuala Lumpur Valve & Fitting (M) S/Bhd /9/00 21/9/00 7 th Training Workshop on Measurement Technology for Developing Countries. National Institute of Metrology, China 2 weeks /10/00 25/10/00 Training on Pressure Metrology i) DH-Budenberg, France ii) Laboratiore National D'Essais (LNE), France 2 weeks /07/07 19/07/07 Technical Assessors of Laboraries Based on ISO/IEC and ISO Training Course Putrajaya Selangor (by: New Zealand Quality College) <Successfully passed the examination> 2 days /09/07 28/09/07 Training on Mass Properties Measurement System Space Electronics, LLC Berlin, Connecticut USA /12/07 14/12/07 Training on Quality Management and Control in Mass Properties Measurement System Intespace, Toulouse, France 2 week /02/08 ASEAN-New Zealand Workshop on Legal Metrology : Towards an Integrated Approach in Legal Metrology in ASEAN Vientiane, Lao PDR (by: Barker Consultant, New Zealand)

8 20. 06/04/09 Start-up and Training on PG7601 TM Gas Pisn- Gauge Calibration System NML-SIRIM, Sepang (by: DH Instruments, A Fluke Company, USA) 4 days /06/08 27/06/08 Training Course on Aumated Sphygmomanometers Taipei, Chinese Taipei (by: APLMF, BSMI, PTB and AQSIQ) /08/08 Proficiency Testing Workshop /08/08 Workshop on Marking Scheme for Pre-Packaged Products /02/09 Workshop on the International Organization of Legal Metrology - Mutual Acceptance Arrangement (OIML-MAA) National Metrology Laborary, Sepang (by: Proficiency Testing Australia) Bangkok, Thailand (by: Department of Trade Thailand and PTB, Germany Bali, Indonesia (by: OIML, France)