3. Requirements for the digital page material. 5. Contact persons, delivery address

Transcription

1 Helprint Oy REPRO SPECIFICATION 1/ Repro Specification 1. General instructions 2. Reproduction, proofing 3. Requirements for the digital page material 4. Data transmission, media 5. Contact persons, delivery address

2 Helprint Oy Repro Specification 2/8 1. General instructions Pages 1. Text etc. may not be closer than 4 mm to the trimming (see the picture) 2. The bleed in pictures and tones has to be 4 mm 3. The register and trimming marks must be in line with trimmed format and outside of the trimming area and may not extent 3 mm closer to the trimming. 4. The trimming area should be 10mm around the page or spread. Width trimmed format (single page) Left side Right side Height trimmed format 2. Bleed in pictures and tones must be 4 mm 1. Elements of text and pictures should not be placed closer than 4 mm to the trimming 3. Trimming marks 4. Page size including trimming Notice! Print only one page or spread per file All pages in the page material should be created and printed with the same settings The page size and the trimming should be the same on every page of the material

3 Helprint Oy Repro Specification 3/8 2. Reproduction, proofing The requirements for the repro material 1. All elements have to be defined in the CMYK colourspace. 2. Resolution - Images 304,8 dpi (12 px/mm) - Graphics and text 1200 dpi 3. The smallest usable character size - Positive: 6 points - Negative: 8 points in bold Pics G&T 304,8dpi 1200 Positive Negative 4. All black text and graphics have to be overprinting. 5. The finest usable line size - single color positive or negative 0,3 mm - negative in 2-4 -color material 0,4 mm 6. "Deep" black in large solid tones - to achieve deep solid black you have to have min. 50% cyan tint in an area which is slightly smaller than the actual black area. Must not be used for text. The characteristics of the printing process at Helprint 1. Helprint is a rotogravure printer. Our printing process is adjusted to match European PSR V2 gravure standard (Process Standard Rotogravure). Colour separation (RGBto-CMYK conversion) should be performed with PSR V2 profiles. Proofs must be printed according to this standard in order to match the printing result correctly. Information about the PSR V2 standard is available on ECI website: 2. The printing paper quality has major influence to the way how the colour separations must be generated and how the pictures must be adjusted. ECI has published ICC profiles for 5 different paper categories: MF SC SC Plus LWC LWC Plus PSRgravureMF PSR SC STD V2 PSR SC PLUS V2 PSR LWC STD V2 PSR LWC PLUS V2 These ICC profiles can be downloaded from:

4 Helprint Oy Repro Specification 4/8 3. Before beginning with the repro work the customer should contact Helprint customer service, so that we can suggest the correct ICC profile for the product and check other possible technical details. 4. If you are a new customer we recommend that you prepare few test pages and send the over to Helprint for inspection and testing. This way we can ensure that the files are technically correct (= no ripping problems), and if there are any problems we can work together and fix them before the actual production. Quality proofs 1. When printing high quality 4-colour products we must be delivered quality proofs, which are accepted by the customer. These acceptance proofs (or contract proofs) will be then used as the colour model for the printing process for the colour accuracy, page layout and overprinting issues. 2. The acceptance proofs must be printed from the final corrected page material. 3. The proofing standard used must be shown in the proofs (MF, SC, LWC, etc.). Data vs. proof differencies If the content of the page data files differs from the supplied proofs, we assume the data being correct. It is a common practice that there can be changes in the page content after approval of the colour proofs. We always use for printing the last data we have received before the agreed deadline of the data supply.

5 Helprint Oy Repro Specification 5/8 3. Requirements for the digital page material Page files 1. Print only one page or spread per one file (e.g. PDF). 2. The page size and the trimming have to be the same on every page of the material. We recommend to print out the pages with space for the technical symbols as follows: - the page size should be 10 mm larger on every side of the page than the trimmed size of the page (see the picture in page 2 of this document) - place the trimming marks, scales, bleed and cutting marks in this white area 3. The orientation of the pages has to be standing, so called repro orientation. 4. Scaling 100% File formats We accept the following file formats: PDF versions Ripped data (CT + LW) CT files 12 pix/mm (304,8 dpi) LW files 36 tai 72 pix/mm CT+LW 12 pix/mm TIFF, TIFF/IT, TIFF/IT P1 JPEG (high quality) Notice! We do not accept any document formats. For example, Adobe InDesign, Quark Express, PageMaker, FreeHand, etc.

6 Helprint Oy Repro Specification 6/8 Naming restrictions The file names may not contain any following characters: -? * : \ / < > " scandinavian character set Preferred naming rules Product issue page version extension filename ABC pdf => ABC03_s006.pdf language versions ABC Russian.pdf => ABC12ru_s045.pdf ABC German.pdf => ABC12de_s045.pdf

7 Helprint Oy Repro Specification 7/8 4. Data transmission, media FTP The address for Helprint FTP server is: ftp.helprint.fi Requirements for file transfer using FTP: An account with username and password is created (= no anonymous FTP) Please contact our customer service for an account Helprint FTP server only supports SFTP protocol. Accepted file systems and media DVD ISO formatted CD ISO formatted Compression File compression is usually not necessary for saving on physical media or file transfer. If necessary, you should use ZIP compression.

8 Helprint Oy Repro Specification 8/8 5. Contact persons, Delivery address Our contact persons Contact information for Helprint customer service you can find on our website: The customer s repro should contact us to check the data specification and to possibly make some tests before starting to do the repro work. We would appreciate to be informed when ever sending us any material whether the material is delivered by mail, courier or by means of digital data transmission. Please inform us about digital data deliveries by to repro@helprint.fi If you send any material by courier services, please send us the AWB number by to: repro@helprint.fi The delivery address for repro material All repro material should be sent to: Helprint Oy Repro Porrassalmenkatu 71 FIN MIKKELI Please mark the job name on the envelope as reference. Please enclose the contact information of the sending company with the name of your contact person for the job in the parcel.