FIRMWARE RELEASE-NOTE. OBID classic-pro ID CPR50.10-E. RF-Controller (RFC) preliminary public (B) SWRN ID CPR50_10-E.

Transcription

1 OBID classic-pro FIRMWARE RELEASE-NOTE ID CPR50.10-E RF-Controller (RFC) preliminary public (B) SWRN ID CPR50_10-E.doc

2 Note Copyright by FEIG ELECTRONIC GmbH Lange Strasse 4 D Weilburg-Waldhausen Tel.: With the edition of this document, all previous editions become void. Indications made in this manual may be changed without previous notice. Copying of this document, and giving it to others and the use or communication of the contents thereof are forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design. Composition of the information in this document has been done to the best of our knowledge. FEIG ELECTRONIC GmbH does not guarantee the correctness and completeness of the details given in this manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since, despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips. The instructions given in this manual are based on advantageous boundary conditions. FEIG ELECTRONIC GmbH does not give any guarantee promise for perfect function in cross environments and does not give any guaranty for the functionality of the complete system which incorporates the subject of this document. FEIG ELECTRONIC call explicit attention that devices which are subject of this document are not designed with components and testing methods for a level of reliability suitable for use in or in connection with surgical implants or as critical components in any life support systems whose failure to perform can reasonably be expected to cause significant injury to a human. To avoid damage, injury, or death, the user or application designer must take reasonably prudent steps to protect against system failures. FEIG ELECTRONIC GmbH assumes no responsibility for the use of any information contained in this document and makes no representation that they free of patent infringement. FEIG ELECTRONIC GmbH does not convey any license under its patent rights nor the rights of others. OBID and OBID i-scan is a registered trademark of FEIG ELECTRONIC GmbH. I-CODE and mifare is a registered trademark of Philips Electronics N.V. Tag-it TM is a registered trademark of Texas Instruments Incorporated FEIG ELECTRONIC GmbH Page 2 of 8 SWRN ID CPR50_10-E.doc

3 General This document describes the history of firmware changes of OBID classic-pro reader type ID CPR50.10-E. Manual No. "H90201-#e-ID-B.doc " described the general functionality of this reader type. FEIG ELECTRONIC GmbH Page 3 of 8 SWRN ID CPR50_10-E.doc

4 History of Firmware Revisions For Hardware FE659-2 V ( ) Outputs: Improve detect of ID.CPRIO-versions. No restrictions of the I/O controls in the notification-mode. Interface TCP/IP: Improvements for critical networks. Support of sending the mac-address in a notification-record. V ( ) Bootloader: Possible Firmware Update via TCP/IP with dhcp enabled. No default configuration after Firmware Update. Interface: Some improvements TCP/IP-stack. V ( ) Transponder Driver: Transponder NXP Mifare Ultralight C added. Transponder Infineon my-d move added. Handling of Mifare Application Directory in Notification Mode added. Support of automatically data-read from NXP-Mifare-Ultralight and Ultralight C-Transponder. Support of automatically data-read from Infineon myd move Transponder. Daylight saving time added, works automatically with network time server. Interface: Interface data encryption added. Network time protocol added. Some improvements TCP/IP-stack. Firmware Update via TCP/IP. FEIG ELECTRONIC GmbH Page 4 of 8 SWRN ID CPR50_10-E.doc

5 V ( ) << Initial Version >> Initial Version for Hardware FE659-2 FEIG ELECTRONIC GmbH Page 5 of 8 SWRN ID CPR50_10-E.doc

6 For Hardware FE659-1 V ( ) Outputs: Improve detect of ID.CPRIO-versions. No restrictions of the I/O controls in the notification-mode. Interface TCP/IP: Improvements for critical networks. Support of sending the mac-address in a notification-record. V ( ) Bootloader: No default configuration after Firmware Update. Interface: Some improvements TCP/IP-stack. V ( ) Transponder Driver: Transponder NXP Mifare Ultralight C added. Transponder Infineon my-d move added. Handling of Mifare Application Directory in Notification Mode added. Support of automatically data-read from NXP-Mifare-Ultralight and Ultralight C-Transponder. Support of automatically data-read from Infineon my-d move Transponder. Daylight saving time added, works automatically with network time server. Interface: Interface data encryption added. Network time protocol added. Some improvements TCP/IP-stack. FEIG ELECTRONIC GmbH Page 6 of 8 SWRN ID CPR50_10-E.doc

7 V ( ) Transponder Driver: Some improvements ISO14443-A. Some improvements ISO14443-B. ISO Host Commands for mifare DESFire Communication. ISO Host Commands for mifare Plus (security level 3) Communication. SetOutput-Command has now the highest priority to the I/O s. V ( ) << Initial Version >> Initial Version for Hardware FE659-1 FEIG ELECTRONIC GmbH Page 7 of 8 SWRN ID CPR50_10-E.doc

8 For Hardware FE659-0 Support of Hardware FE659-0 is discontinued. V ( ) Transponder Driver: Support for Support for B Support for NXP-Mifare Plus (security level 1) Some improvements ISO14443-A Support of automatically data-read from NXP-Mifare-Classic-Transponder Support of automatically data-read from NXP-Mifare-Plus (security level 1)Transponder Support of automatically data-read from ISO15693-Transponder Ethernet: Network discovery per User-Datagram-Protocol (UDP) Support for ID CPR.I/O Extension board FEIG ELECTRONIC GmbH Page 8 of 8 SWRN ID CPR50_10-E.doc