BioLite Net. Firmware Revision Notes EN BLN V1.43. Biometrics & Security. Version 1.43

Transcription

1 BioLite Net Firmware Revision Notes Version 1.43 Biometrics & Security

2 Firmware Version 1.43 (Build No. 1.43_161010) Release: Improvements 1.1. The stability of the network communication has been improved when the BioStar Server PC is connected by using wireless or VPN network. 2. Bug Fixes 2.1. Issue with RS485 communications between a master(host) device and a slave device. 1

3 Firmware Version 1.42 (Build No. 1.42_151103) Release: Improvements 1.1. The stability of the network communication (UDP, RS-485, and TCP/IP) has been improved Feature added to unlock the door using the release alarm button when the door has been locked by the door lock button Feature added to prevent the latent fingerprint matching Feature added to display various date formats (DD/MM/YYYY, YYYY/MM/DD). 2. Bug Fixes 2.1. The authentication speed gets reduced when setting a muster zone The forced open alarm goes off when opening a door after authenticating from a slave device The forced open alarm goes off when opening a door after pressing the unlock door button from BioStar When an SIO is connected to a master device, the door open/closed signal is not handled properly The holiday schedule does not get applied after rebooting the device The device displays T&A keys in an incorrect order when the <x1 or >x1 key is not defined on the T&A key menu The alarm zone s alarm does not get released by a bypass card Incorrect logs were created when using the card + fingerprint operation mode. 2

4 Firmware Version 1.41 (Build No. 1.41_150824) Release: Support OH sensor. 3

5 Firmware Version 1.4 (Build No. 1.4_140206) Release: Support changing MTU size 2. Save logs when card authentication fails 3. Added Relay Off log 4. Control authentication results and LED/Beep using Input port 5. Card ID Wiegand Bypass feature 6. Set Custom ID range when setting Wiegand 7. Support the Wiegand Pulse Width and Height settings 8. Available to set whether to use Wiegand Fail Output and support Output Value settings 9. Improved the Mifare sector key update 10. Added a feature preventing latent fingerprints 11. A feature separately showing logs saved in Admin in menu 12. Support Exit button interlock motion, apply priorities with FireAlarm 13. Save BioStar administrator ID logs when opening a door using BioStar 14. Unlock Time Start Trigger settings feature 15. Both users and administrators should be authenticated to open a door in Double Mode. 16. Changed to check every minute and make a sync when time difference is more than one second between server and device 17. Support LED OFF status 18. Users now can prevent the false alarm by choosing whether or not to apply an input continuation time to the exit button or door sensor. 19. The following bugs have been fixed Wiegand Alternative Value (FC fixed number) was not output Identification succeeds only with fingerprint when the fingerprint and password mode are applied Problem of the BLN backlight standby time settings Verification with template-on-card can be made while entering the device menu Unavailable to set LED and Buzzer status on Tamper Wiegand settings changed after rebooting device I2C crash causes a failure in proper time data loading and it makes doors open at times when unlock time is set If manually inputting the administrator card ID which was initially registered in BLN, authentication did not work A user blocked by AccessGroup was able to be authenticated by continuously pressing the menu button Door IO setting display error on device UI Held Open Alarm problem when using SIO Door Sensor Wiegand output and device output not working when using server matching All exclamation marks placed in front of phrases are now moved to the end of phrases. 4

6 Firmware Version 1.31 (Build No. 1.31_120309) Release: Support OC4 sensor. 2. Support 7Byte Mifare CSN. 5

7 Firmware Version 1.3 (Build No. 1.3_110306) Release: Support Interlock Zone It is possible to configure two doors as an interlock zone. 2. Support Mifare Plus Card Support CSN reading Read data saved in each sectors of Mifare Plus Card Write data to each sectors of Mifare Plus Card. 3. Support Mifare Desfire and Ultralight card 3.1. Support CSN reading only. 4. Upgrade Fingerprint algorithm 4.1. Extracting algorithm is improved Matching algorithm is improved. 5. Support ANSI378 fingerprint template format. 6. The following bugs are fixed Using HID card, there was no validation about card data length Using Unlock Time, it does not occur forced open event On March 2 of 2011, the date of some devices might have been reset to March 1 of 2011, one day earlier than the actual date On January 1 of 2012, the date of some device may be set to January 1 of

8 Firmware Version 1.21 (Build No. 1.21_101111) Release: The following bugs are fixed Set time for device, it does invalid value set. 7

9 Firmware Version 1.21 (Build No. 1.21_100318) Release: The following bugs are fixed. 2. Set time for device, it does invalid value set. 8

10 Firmware Version 1.2 (Build No. 1.2_091218) Release: Support enrolling new users with RF card It is possible to add a new user using RF card without PC software. 2. Support issuing Mifare template-on-card without PC software. 3. Support extended alarm zone operation It is possible to configure any input port of BioLite Net as an external sensor input for extended alarm zone It is possible to configure any input port of BioLite Net as an external arm/disarm input for extended alarm zone It is possible to configure any output port of BioLite Net as an arm/disarm status output for extended alarm zone. 4. Support arm/disarm initiation on alarm zone by pre-defined keypad. 5. Support a turnstile-type door It is possible to configure BioLite Net to close door upon sensing door status input within door open time. 6. Server matching mode is reinforced BioLite Net will automatically switch to local matching mode upon detection of disconnection with server. 7. Support Wiegand output of card ID in case of template-on-card matching. 9

11 Firmware Version 1.1 (Build No. 1.1_090612) Release: Support Extended Wiegand mode BioLite Net of Extended Wiegand mode is capable of conventional Access Control Unit with regards to 3rd party RF reader rd party RF reader attached to a BioLite Net Wiegand mode of which is configured as Exctended will be added and recognized as an independent device within BioStar V1.2 or later Once attached, such a RF reader can act as a Door or Zone device. 2. TCP Keepalive mechanism is enabled to facilitate detecting abnormal link down. 3. Parameter checking is reinforced to prevent device from saving invalid configuration data (especially by misuse of SDK APIs). 4. Card ID data is pre-processed before being used as per achieving compatibility with different formats from various RF readers having their own Wiegand format. 5. Held open alarm is automatically released after the door is recognized to be closed. 10

12 Firmware Version 1.1 (Build No. 1.0_071009) Release: Created. 11

13 Biometrics & Security Suprema Inc. 16F Parkview Tower 248, Jeongjail-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, Republic of Korea Tel Fax