The Octava HDDSX Matrix System works in conjunction with a Cisco SG-300 series managed Ethernet switch.

Size: px

Start display at page:

Download "The Octava HDDSX Matrix System works in conjunction with a Cisco SG-300 series managed Ethernet switch."

Harry Conley
5 years ago
Views:

1 The System works in conjunction with a Cisco SG-300 series managed Ethernet switch. Note- we recommend using your SG300 series Ethernet switch as a dedicated switch for video matrix switching only. You must first configure the Cisco SG-300 series managed Ethernet Switch prior to using it as a video matrix. We can pre-configure the SG300 Ethernet Switch for you. Please contact us for this service. If you already have a SG300 Ethernet switch and wish to configure it yourself please follow these procedures: What You will need to configure your Managed Ethernet Switch: 1. PC with MS Windows 2. Octava_HDDSX_switch_setup_ exe program 3. Your Cisco SG-300 Ethernet switch 4. A Cat 5/6 cable

1. Connect a LAN cable directly from you PC to the last port of your SG-300-xx Ethernet switch. For example, if you have a SG-300-52.

2 1. Connect a LAN cable directly from you PC to the last port of your SG-300-xx Ethernet switch. For example, if you have a SG Connect to the G52 port. 2. Login into the Cisco SG-300 per the instructions shown here. You may refer to the Cisco user manual as well.

3. Enter 192.168.1.254 in your browser. 4.

4 3. Enter in your browser. 4. Enter the default credentials: and Login Login: cisco Password: cisco * If your login and password does not work, do a system RESET to the Ethernet switch to factory default. See you Installation Manual.

5 5. Confirm and Change your password If possible use the se following as the NEW Login and Password Please Note your Login : cisco Please Note your Password: sg300-octava

62 or later If the firmware is not up to date.

6 6. Verify that the Cisco SG300 switch firmware revision. 6.1 Go to System Summary. 6.2 Check Firmware Version is or later If the firmware is not up to date. Please refer to your user manual and perform a firmware update. You may check at this url :

7. Enabling Telnet 7.1 Select Security Menu 7.

7 7. Enabling Telnet 7.1 Select Security Menu Select TCP/UDP Services Enable Telnet Service Apply Configuring Managed Ethernet switch for Enter the default credentials: Login: cisco Password:cisco

8 8. Setting Telnet Timeout 8.1 -Select: Administration Menu Select: Idle Session Timeout Telnet Session Timeout: Set to NEVER Apply Configuring Managed Ethernet switch for 9. SAVE!

10. Copy/Save File 10.1- Source File Name: Select Running configuration 10.

9 10. Copy/Save File Source File Name: Select Running configuration Destination File Name: Select Startup configuration Apply Enter the default credentials: Login: cisco Password:cisco 11 Press OK

10 12. LOG Out

13. Configuring Video Input and Outputs 13.1 - Open Octava_HDDSX_switch_setup_112216.exe program 13.2 - Select Your Ethernet Switch Model 13.3 - Select number of Video Inputs 13.

11 13. Configuring Video Input and Outputs Open Octava_HDDSX_switch_setup_ exe program Select Your Ethernet Switch Model Select number of Video Inputs Select number of Outputs Enter the IP address of the connected Cisco Ethernet switch Enter Login name : cisco Enter Password: sg300-octava Press : Connect Configuring Managed Ethernet switch for

12 14. Wait for program to update the Cisco Switch. Once complete, you will see a connection diagram. You will need to connect your HDDSX-TX transmitters and receivers per the connection diagram Press CLOSE Configuring Managed Ethernet switch for The Cisco SG300 switch is now full configured to work with the Octava HDDSX TX and RX as a N x M Matrix! DONE with Configuration

The Octava HDDSX Matrix System works in conjunction with a Cisco SG-300 series managed Ethernet switch.

Octava HDDSX Matrix User Guide This User Guide is for control of the HDDSX Matrix using the feature of the CISCO SG300. For other types control, contact us. The Octava HDDSX Matrix System works in conjunction