Error correction BasePac 21 Version 4.01
|
|
- Barbara Harrington
- 5 years ago
- Views:
Transcription
1 Recalculate connections center blocks Picture Rotation of pictures View Zoom function Draw Center blocks Punch input by pairs of points input by pairs of points pull compensation Insert block Lettering Trimming between letters Border library pull compensation TT Font conversion TT Font conversion Template function Design administration ZSK MSCI Ringbuffer Error correction BasePac 21 Version 4.01 It is now also possible to use the function recalculate stitches and connection point if only monogramming is activated. After using the center blocks function it does now automatically the recalculation of the connection points. At rotation of a picture by 180 it draws not the picture rotated. Before is doesn't. Now the mouse wheel is supported for zoom in any mode. With Ctrl+ mouse wheel you can zoom in and out. The center function supports now also drawing lines. At calculation of stitches with input by pairs of points the stitch density is now always computed correctly. At input by pairs of points was sometimes the area drawn filled while no stitches are calculated. When deleting the first pair of points now the starting point is moved to the new first pair. when pull compensation is used, now the first and last stitch does also have the pull compensation. When inserting a block in punching mode at design end the block is now always correctly inserted at the design end. Sometimes it did not calculate the trimming between letters correctly. When changing a border from the border library it sometimes did not show the correct library and the correct parameters. With Version 4.0 came an automatically pull compensation at lettering. Now this is removed because this changes the view of some letters. The conversion of TrueType fonts is optimized. Now the user can select the letters he wants to have included in the font. At MSCI machines sometimes the connection to the machine was cancelled when the machine was not in the ribbon mode. The ringbuffer display was not correctly updated in ZSK MSCI mode.
2 format disk When formatting disks in DOS compatible formats it made sometimes an write protection error. Hiraoka Disk When saving to Hiraoka Disk it did not transfer the first 8 stitches. Print and Statistik Save PCX Save PCX The folder for saving is memorized and the default filename is the design number. In some cases there were invalid pixels in the file. Error correction BasePac 21 Version 4.02 values MSCI Monogramm Border library Border library Display of special function Embroider design (Toyota machine) Load Stitch data Template function Selection of designs for use in a template Insert lines Automatic size correction Cursor position Template settings Comment ACE all values which were previously set in Inc. (1/10. mm) are now set in mm. When used in the MSCI machine, now the menus are structured, so they do not come inside the reserved area for the machine. In the borders out of the border library, now the underlay stiches are divided, if the border with is larger than 7 mm. The fixing stitches are now made at the inside of the borders. In some cases the special functions were not displayed in the toolbar. Now this is corrected. When loading a design directly from Diskette to the editor, it could not be embroidered until it is saved to the harddisk. (Error fffffffe in View.cpp) Now it is possible to save this design also. When loading a stitch data file, it did automatically optimize needle changes where the needle keeps the same. Now these needle changes are kept to be available for editing. In the template settings only designs from the GiS Folders can be selected now. Insertion of lines in a template is now again possible. Now the font size is corrected automatically if selected too large for the frame size. When stepping through the template with the arrow keys now the actual line is always scrolled into view. After changement in the template settings the already entered lines are corrected to the new values. Now a comment for each template can be given in the first page.
3 recognition of thin lines in pictures The recognition of thin lines has been improved. Monogramming TT Fonts with chinese letters Small sizes at true type fonts Parameters Text on circle Thickness of fonts Trimming in characters Punch Macro Insert automatic Save stitch type Organisation of stitch types Organisation of stitch types Save macro Stich direction lines with different density Drawing mode Insert Loading of EMF files Loading DXF files When used with windows versions which allow this, now also extended chinese, korean or japanese fonts can be used. When used as small letters the contours of true type fonts are corrected. When the punching option is in use, now all stitch parameters can be set also in monogramming. When changing the size of the circle, now the text laying on this circle is also moved. Until now it was only possible to make GiS-Fonts thicker. Now also all P-Fonts and TT-Fonts can be changed in thickness. For this fonts the extension of the thickness will be given in mm. Sometimes there was trimming inside of separate parts of characters even if the trimming length was not reached. This occurred only after conversion to coordinates. Now the trimming length is checked always. The macro selection is greyed now when inserting outer contour for structured fill. When inserting a new automatic program directly after another automatic program the starting point of the new program is calculated correctly now. When deleting more than one stitch type at a time in the save stitch type dialog, the program created duplicate entries in the list. Now this is corrected Now also stitch type groups are available to organize the stitch types Now the saved stitch types can be renamed and sorted. The order of embroidery is now minded when saving macros out of a group. The calculation of stitches has been improved When inserting stitch direction lines it does not use the newly entered density only for the inserted stitch direction line and not for the complete program. When selecting corner during drawing of free lines and then changing the curve/straight style it does not make all new points with corner attribute now. The conversion of EMF files to drawing lines has been extended. The conversion of DXF files to drawing lines has been
4 extended. Now also groups are accepted. Font Editor Creation of font Creation of font Input of base line and upper length Input of left and right spacing Add letters to fonts Editor Alphanumeric stitch display Repeat grid Repeat view Head selection Remove block marker Needle-Stop Table Sequin function Film Availability in monogramming Multi column view Print and Statistics The calculation of contours has been improved Calculation of font size and adaption of the letters has been improved. Now the input mod for base line and upper length has been changed, so each letter can be sized to the given base line and upper length. The input of left and right spacing has been improved. Now it is possible to add letters to the fonts afterthought The speed of navigation through a design with activated alphanumeric stitch display has been improved dramatically. With activated Punch 1 or Editor option it is now possible to view a repeat grid for designs depending of the design type. At multihead designs with head selection the grid distance is the head distance, at shiffli designs the grid distance is the needle distance. With activated Punch 1 or Editor option the Repeat view can be selected at multihead designs with head selection or at shiffli designs. Now the Repeat jump is correctly calculated at head selection. Also it selects after head selection the stitch after so everything runs correctly when continueing punching. An error which occurred during Head selection entry at design start is removed. It is no longer possible to remove the block marker at the beginning of a character from monogramming Sometimes there was an error when converting needles to stops at block beginning. This is corrected. Also it is no longer possible to change the start needle to stop. Removing of Sequin on/off functions was not always possible, now corrected. Now the film function is also available for users with only monogramming option so they can change the order of embroidery. Now the Film strip can be displayed in multi column view to have a better overview for changing the order of embroidery. The multi column view is activated when the film is undocked. Changing between docked and undocked state is done with double clicking to the header line of the film. Also the film can be docked at the right, top or bottom side.
5 PCX Export PCX Export File management Import and Export of designs ProductionManager (Version 1.04) Selection of designs for use in a template When using PCX Export it was not possible to leave the dialog when Rotation not 0 was used in the last printout. Now this is corrected. At large designs was an error during calculation of dpi count. Now it is possible to import and export designs in different formats to and from Hard disk and other media. The connection to the client is improved so the file names are transmitted more accurately and are displayed correctly at the receiver s side. In the template settings only designs from the GiS Folders can be selected now. Error correction BasePac 21 Version 4.03 Template function Parameter for Underlayer step length Monogramming Parameter for Underlayer step length Text on curve Font "Semiss" Font "Black Chancery" Font "Aston" Punch Sequin function Center line input Calculation of underlayers The parameter for underlayer step length was not set correctly at Version 4.02 for Punch fonts. The parameter for underlayer step length was not set correctly for all font types. Now it calculates the correct Start and end stitch also for underlayers in TrueType fonts. When changing the curve it displays and recalculates the text now always correctly The distances to the dots at letters "ijäöüäöü" are shortened for "Semiss". The font "Black Chancery" is extended with the letters "ÄÖÜäöü". The letters in "Aston" suit now better together. Now it calculates the correct Start and end stitch also for underlayers in structured fill. The calculation of overlap is improved. The errors which came up with Version 4.02 are removed. Now 2 Sequin devices are supported. The calculation of pairs out of center line is improved. The calculation of the contour underlayers needed for complex fill is now more accurate.
6 Editor Sequin function Print and Statistics Call from editor File management Export of designn as GiS Stitch data Design versions ZSK Transport code Now 2 Sequin devices are supported. When loading a design out of the "List of recently used files" and the calling the Print program it did not start the printer if the Directory name ended with ".". Now this works also. When exporting a design as GiS Stitch data it did not copy the last stitches in version Now it copies correctly. The restriction of version numbers to 0 31 is no longer valid. Now version numbers 0 99 are permitted. When reading or writing ZSK Transport code it does now recognize 2 sequin devices. Error correction BasePac 21 Version 4.04 Common things Error in designs with partly removed letters. hide trimming in TrueView end needle = start needle not always functioning Needle change missing when inserting border frames with needle 1,2,1 Template function Density Needle sequence Monogramming Exception error Text to curve Stitch direction at TrueType font with outer contour Boldness when changing the font Now there are additional tests during editing of partly removed letters. It is now possible to hide the trimmings in the TrueView view. The function end needle = start needle does now work correctly also when adding letters to a design. Now the needle changes are always correct. When changing the density in the template settings, the value was not always recognized. When loading a design in a template in front of the lettering, the start needle of the design is now recognized as start needle of the template and duplicated needle changes are removed. The system crash when inserting a letter to a text when there is a design following is now removed. When using Windows XP the hot spots were displayed also at text to curve and envelope. Now the stitch direction is saved correctly when using the TrueType font as outer contour. When changing the font the absolute boldness set for a true type font is no more used for the GF font.
7 Unwanted changes in font size Text moves after change of parameters Lock stitches Lock stitches at TT fonts Punch, overlap areas Contour underlayer does not use the underlayer distance System hangs after change of parameters. Input of stitch direction with Punch 1 or Punch ACE Drawing mode Set color Font editor View of alphabet list Editor Wrong needle changes when importing to Shiffli designs. Film function Print and Statistics Version number > 31 Program fault when printing background pictures in Windows XP Printing of machine heads. Sometimes the font size changed when changing other parameters. Problem is solved. Sometimes the text moved outside the screen when changing other parameters. Problem is solved. the lock stitches at the beginning of a letter are only made, when the lock stitch length is reached. At TT fonts the lock stitches at the beginning of a letter are now made up to 1 mm inside the letter and not at the edge. The calculation of stitches for TT fonts is improved and problems with not completely filled letters are solved. In overlap areas the stitch calculation is improved to avoid gaps in the stitches. The stitch calculation is improved and problems with partly not filled areas are solved. At fills with overlap the calculation is improved to avoid empty parts. When punching a triangle as fill the contour underlayer does now correctly use the underlayer distance. After changing of parameters the density changed in some cases to This caused an infinite loop in the calculation. Problem is solved. The input button for the stitch direction is changed to make clear, that only straight stitch direction is possible. The colors for drawing block can be set also for more than one block selected. The view of the alphabet list on the left side is now also with Windows XP and "Symbol" fonts possible. When importing designs to shiffli designs, there were needle changes created which are normally not allowed there. This is solved. The input of needle changes by using the film function is removed in Shiffli designs. Now it is possible to print out designs with version numbers higher than 31 Now it is possible to print all background pictures also with Windows XP. With some printer drivers the printout of the machine heads is
8 mirrored. Now this can be inverted with a setting in the file GiSBasePac21.ini. For this, insert the value StickkopfGespiegelt=1 to the section [Druck Einstellungen]. File management Double click to shiffli design in windows explorer does not work. When using virtual drive "@: Import" it was possible to press "Pictogramm" button, which causes a program fault. Remove of designs in ZSK Memory Currency setting in design head Loading of Lässer designs with Needle pattern ZSK-Transport code ZSK Stitch data Folder list Computer without disk drive with Windows NT / 2000 / XP Sort folders Machine controller Open of designs from drive "@: Import" not functioning Needle change list It is now possible to import also shiffli designs from windows explorer, if shiffli option is in use. Problem is solved. It is not possible to remove files in the ZSK Memory, because this is only allowed for the Machine software. Now the recycle bin is grayed and the "Del" key is not accepted. Now the default currency in the design head is used from the currency setting in Windows control panel. The recognition of Needle patterns is imroved and they are saved in ZSK EPC compatible form. The conversion of needle changes and sequins is improved when loading and saving ZSK Transport code. When loading ZSK stitch data without optimizing it creates now also needle 8 to 14 and no more needle 7 + x. In the Folder list there were sometimes not all folders displayed when switching from a drive with more folders to a drive with less folders. Now this is corrected. Up to now it was not possible to load the design administration at such a computer. The message "Floppy2k.sys not loaded or missing" was displayed. Now it is possible to open the design administration also at such a computer. In the GiS design administration it is now possible to move folders up and down. Problem is solved. In the list for the needle changes an additional sequential number is displayed. Common things Center Monogramming Long underlay stitches in PF Fonts Error correction BasePac 21 Version 4.05 In the center function was the upper and lower distance reversed. Now the upper distance is used at the top and the lower distance is used at the bottom. When using PF Fonts it now recognizes the setting for the
9 shortening of under layer stitches and does not produce long stitches for under layers in curves anymore, when the shortening factor is given. Calculation of shortest point connection Changed reference points Font editor Saving of changed letters in PF Fonts Shiffli editor Design with repeat pattern Design with repeat pattern Print and Statistics print multiple designs, catalog printing File management MSCI Monogramm Output to ZSK ring buffer or memory Selection of connected ZSK machines At various operations like stretching and rotating of text lines the shortest point connection is automatically recalculated now. Now the marker for changed coordinates is saved with the design and is again active after loading the design. When using PF and SF Fonts, now changed letters can be saved to the font. There was an error in saving design using repeat patterns which could crash the EPC-Unix system when loading the design there. This has been corrected. In the start condition, now always the correct repeat pattern is recorded. When printing multiple designs with different design version numbers it sometimes makes the wrong order or did not print all designs or crashes. This is corrected. In the MSCI Monogram software the Export and Import drives are no longer present, because this function is not supported by the MSCI Monogram software. On output to ZSK Ring buffer or memory now the design is optimized. Missing trimming functions are add and too short stitches are eliminated. The selection dialog for ZSK memory is enhanced and a search function was added. Error correction BasePac 21 Version 4.06 Global Border library Sequin view Template function Program hangs at start up When creating a design with only a border from the border library the needle of the border was not used as start needle in the design. This caused additional needle changes and additional stitches when this design is used in a Text template. In TrueView Sequins are shown also now. If the template has too large values for Embroidery field or tag number it could cause a program hang during start up.
10 This is now corrected. Import drawing Accepting AI format Import picture Additional formats Fill areas Satin areas Editor Clean coordinates Print and Statistics Print design Print sequins Load Background picture Printing of designs with Laser functions File management Design version > 31 Copy to ZSK Memory ZSK Memory ZSK Memory Pictogram Delete designs in ZSK Memory Sequin view Design head AI (Adobe Illustrator) format is now also supported when importing drawings..jpg (JPEG) format is now also supported when importing pictures. The calculation is optimized. The start point is now allowed to be at a hole or additional outline. The calculation is optimized. After cleaning of coordinates, now the stitches are calculated automatically. Is there no standard printer set, it show a printer selection dialog before starting the print dialog. The setting in this dialog is now accepted and afterwards the print dialog opens. In print and statistics option the sequins are now also printed..jpg (JPEG) format is now supported. When printing designs which uses laser functions the additional printing of laser contours can be selected. When copying designs now the version is also allowed to be more than 31. There is no more error message coming up. When copying to ZSK Memory it is now possible to enter full design numbers with 8 digits number and 2 digits version. When changing the ZSK Memory folders it is no longer needed to have all connected machines active. Also it is no longer needed, that the path has the \ZSK\ part. When viewing pictograms in ZSK Memory there was a bug in Version 4.05 that is caused a failure when the memory is opened directly when the dialog is opened. This is corrected. It is now possible to remove designs in ZSK Memory, if this memory is not located on a machine. (Is located on a machine, it is possible to remove the designs with the machine software) In Pictogram and Design view the sequins are shown now also. In the design head now the symbol is allowed at the currency.
11 Design list Check Data In the directory it is now shown in the data type if the design holds Head selection (-H), Shiffli (-Sh), Sequin (-Pa), Borer (-B) or Laser (-L) s. At such designs a tool tip is shown, when the mouse is moved over the data type. Version numbers > 31 At the tool GiS Data Check are now version numbers > 31 supported. With previous versions this version numbers could cause errors. Laser Support of Laser machine made by S.E.I. A new option was built, which enables the input of special functions for controlling the laser equipment for Embroidery machines built by S.E.I. When exporting designs with such functions, it extracts the needed control data from the stitches to separate files for Laser cutting. Common Fixing stitches Backup & Restore Unformatted media Design administration USB Disk drive Common new in 4.06b Center parts Head selection for multihead machines Join all blocks Wrong block size Error correction BasePac 21 Version 4.06a/4.06b/4.06c The fixing stitches came sometimes out of the letter. Now the fixing stitches are calculated at the correct position again. Now it is possible to abort the Backup process if there is no formatted media inserted. At some new computers (specially Notebooks) is not internal 3,5" Disk drive mounted. With external USB Disk drives it is not possible to work with "non DOS compatible" Disks. Every-thing worked, if the switch "only DOS Disk formats" was checked. But if this was not checked, sometimes the computer crashed, when tried to connect to the USB drive. Now the access to "non DOS compatible" Disks is blocked if a USB disk drive is found. When centering grouped texts with Envelope it moved sometimes the blocks to wrong locations. Now the centering works correctly. The button for repeat jump is now moved back to the right position in the parameter line. When joining all block it made in seldom cases a program fault. Now this is corrected. When using "closed curve" in pairs input it could create a
12 Import picture new in 4.06b load.jpg (JPEG) file Design transfer to ZSK Machine new in 4.06b Save options Stitch amount new in 4.06a Time consumption during save Problems with floppy disk access in Windows XP wrong Box size for the block if the curve is not really closed. At some.jpg (JPEG) files the program closed during loading. This fault is corrected. The display of activation of save options in the menu is now correctly made. The total number of stitches is now correctly calculated and written to the design head. In version 4.06 was the time consumption for saving designs in some cases significantly increased. This is now speeded up. In some cases the program could not be started because the floppy disk driver could not be loaded. This is now corrected. new in 4.07a Call of Density adjustment, Coordinate processor and Satin stitch correction Editing Precision at the insertion Automatic underlay Design administration Save to ZSK Memory Export Floppy Disk access Settings Sequins Error correction BasePac 21 Version 4.07a The function for density adjustment, coordinate processor and satin stitch correction had not been called even if the editor option was activated. Now it functions as expected. The precision at copying and insertion from stitch blocks was improved, so small postponements are avoided particularly with special functions. The calculation for Fill underlay at Outer contour filling was improved. Now the pictogram folder is created automatically if not existing and the Pictograms are saved. When the memory space is not enough when exporting designs it will now show an error message. Previously there was no error message but the file was corrupt. With the access to diskettes, hindrances can occur if a virus scanner is active since this refuses the access to not DOS'S compatible diskettes. Now, the virus scanner can be deactivated for such cases during the access to diskette. The settings for the design administration can now also be selected through the GiS Symbol in the Title bar of the main design administration dialog. Now designs with sequin functions can be loaded and stored correctly to Tajima Disks.
13 Export for Laser machine "Pegasus" Template Trimming am the last embroidery field Ribbon machine Print & Statistics Font selection Machine Canceling the transfer Designs are now also exported correctly when they have the state "Laser mode on" at the end. Now, the thread cut is executed also at the last embroidery field. Now, also overlapping patterns can be sent to the machine in connection with a ZSK machine with ribbon equipment. (If the machine is able to do this) With the call of the font selection and aborting with Cancel or ESC, a smaller value for the font size was stored. Now, the previous value is retained. At transfer to Tajima or Brother machine, the transfer could properly not be cancelled if the machine doesn't assume the data. Now, it can also be cancelled here. Monogram Error correction BasePac 21 Version 4.07b Dear User, unfortunately we are no longer allowed to distribute our font types Helvetica and Times, because the rights of the Heidelberger Druckmaschinen AG had been violated. That's why we replace these font types with our fonts GiS Swiss and GiS Serif. Editing Delete of additional contours in letters When deleting additional contours in letters (p.e.: i-dot) there were sometimes a program fault which is now corrected. Recalculation Special functions Punch Center line input Design administration Export Design type extension H, -P, It was possible to use running options with the editor option only activated which are not allowed. When changing/deleting special functions which follow immediately after a needle change there were sometimes wrong function codes inserted instead of deleted. When inputting center line with crossovers it cal-culated the pairs of points not correctly in Version 4.07a. Now this is correct. This belongs also to Line-ACE and Border library. During export of files now the file-extension is checked and replaced with a valid one if necessary. The type extensions are now removed if the corre-sponding special function is removed from the de-sign.
Error correction and Extensions from BasePac 6.04 to BasePac 7.00
Error correction and Extensions from BasePac 6.04 to BasePac 7.00 Common / Design management Design import from Explorer Load stitch data Search in folders Mouse wheel Save as ZSK Memory Slanting of modules
More informationEPCWIN THE HIGH-END SOFTWARE. Options
EPCWIN THE HIGH-END SOFTWARE ZSK Stickmaschinen GmbH Magdeburger Str. 38-40 D-47800 Krefeld Tel: +49 (0) 2151 44 40 Fax: +49 (0) 2151 44 41 70 atelier@zsk.de www.zsk.com Options Version 4.0 (01/2009) Version
More informationEPCWIN THE HIGH-END SOFTWARE. Options
EPCWIN THE HIGH-END SOFTWARE ZSK Stickmaschinen GmbH Magdeburger Str. 38-40 D-47800 Krefeld Tel: +49 (0) 2151 44 40 Fax: +49 (0) 2151 44 41 70 atelier@zsk.de www.zsk.com Options Version 5.0 (01/2013) Version
More informationEPCWIN. Options THE HIGH-END SOFTWARE. EPCwin Software Options. ZSK Stickmaschinen GmbH EPCwin Version 6.0. ZSK Stickmaschinen GmbH EPCwin Version 6.
EPCWIN THE HIGH-END SOFTWARE EPCwin Software Options Multi-Head Design Management Design manager, text and image directories Save design Read and write all multi-head disk codes supported by EPCwin ZSK,
More informationEPCWIN. Options THE HIGH-END SOFTWARE
EPCWIN THE HIGH-END SOFTWARE ZSK Stickmaschinen GmbH Magdeburger Str. 38-40 D-47800 Krefeld Tel: +49 (0) 2151 44 40 Fax: +49 (0) 2151 44 41 70 atelier@zsk.de www.zsk.com Options Version 3.5 (01/2007) Version
More informationOptions. ZSK Stickmaschinen GmbH Magdeburger Str D Krefeld Tel: +49 (0) Fax: +49 (0)
ZSK Stickmaschinen GmbH Magdeburger Str. 38-40 D-47800 Krefeld Tel: +49 (0) 2151 44 40 Fax: +49 (0) 2151 44 41 70 atelier@zsk.de www.zsk.com Options Version 2.5 EPCwin Software Options Multi-Head Design
More informationLuggage Tag. 1. Open Creative DRAWings. 2. Left click on on the new design menu.
Luggage Tag 1. Open Creative DRAWings. 2. Left click on on the new design menu. 3. Left click on and then in the circle next to New graphic. 4. For the hoop, select None. 5. Choose the desired fabric type
More informationContents Toolbox Tools Standard Tools View 4 Add Design Select 4 Edit 4 Lettering 6 Monogram 7 Design Colors Sew Sequence Bounding Box
Help Contents Toolbox Tools 3 Standard Tools 4 View 4 Add Design 4 Select 4 Edit 4 Lettering 6 Monogram 7 Design Colors 7 Sew Sequence 7 Bounding Box 8 Shortcuts 9 Install Toolbox on your Windows Computer
More informationRelease Notes and Installation Instructions for DesignShop 2004 Version Release
June, 2004 Important! DesignShop Changes Release Notes and Installation Instructions for DesignShop 2004 Version 5.07.023 Release 012704.0 This document contains information about DesignShop Version 5.07.023
More informationCREATE A ROADMAP WITH A BOTTLE OF WINE
1 CREATE A ROADMAP WITH A BOTTLE OF WINE 2 PLANNING AND DIGITISING YOUR OWN DESIGNS BERNINA Embroidery Software Designer Plus V5 and 6. PLANNING THE DESIGN. Good embroidery is the result of careful planning.
More information4. The Utilities tab also contains the Registration, Dongle Activation, and Smart Update links which take you to the Registration Database online.
Premier+ Configure Page 1 Customize your Personal Settings 1. Open Premier+ Configure from the Premier+ Embroidery desktop icon or from the Start Menu/Premier+ Embroidery System program folder. Utilities
More informationFirst steps. ZSK Stickmaschinen GmbH Magdeburger Str D Krefeld Tel: +49 (0) Fax: +49 (0)
ZSK Stickmaschinen GmbH Magdeburger Str. 38-40 D-47800 Krefeld Tel: +49 (0) 2151 44 40 Fax: +49 (0) 2151 44 41 70 atelier@zsk.de www.zsk.com First steps Version 2.5 Dear customer, Congratulations on your
More informationOpenForms360 Validation User Guide Notable Solutions Inc.
OpenForms360 Validation User Guide 2011 Notable Solutions Inc. 1 T A B L E O F C O N T EN T S Introduction...5 What is OpenForms360 Validation?... 5 Using OpenForms360 Validation... 5 Features at a glance...
More informationActivating DEMO in BasePac 8
All methods of DEMO activation in BasePac 8 This list will enumerate all different methods to enter passwords for Demo activation in BasePac 8. You find the dialogue for entering the passwords in: Settings
More informationService Pack 2 for BERNINA V6.0. Content Improvements in BERNINA V6.0 SP General issues CorelDRAW issues Quilter issues...
Service Pack 2 for BERNINA V6.0 8 June 2012 This file contains notes on the BERNINA V6.0 multi-language software Service Pack 2. This Service Pack is intended for installation with any released version
More informationHow to...create a Video VBOX Gauge in Inkscape. So you want to create your own gauge? How about a transparent background for those text elements?
BASIC GAUGE CREATION The Video VBox setup software is capable of using many different image formats for gauge backgrounds, static images, or logos, including Bitmaps, JPEGs, or PNG s. When the software
More informationFirst steps. ZSK Stickmaschinen GmbH Magdeburger Str D Krefeld Tel: +49 (0) Fax: +49 (0)
ZSK Stickmaschinen GmbH Magdeburger Str. 38-40 D-47800 Krefeld Tel: +49 (0) 2151 44 40 Fax: +49 (0) 2151 44 41 70 atelier@zsk.de www.zsk.com First steps Version 3.0 Dear customer, Congratulations on your
More informationGenerations Monograms + Monogramming Masterpieces By Bernadette Griffith Generations Software
Creating monograms in Generations Monograms+ is a snap. Just select one of the build in monogram templates, a True Type Font lettering style and one of the decorative borders and frames included in the
More informationStitchGraph User Guide V1.8
StitchGraph User Guide V1.8 Thanks for buying StitchGraph: the easy way to create stitch layouts for hardanger and other complex embroidery stitch types. StitchGraph is intended to allow you to create
More informationImpress Guide Chapter 11 Setting Up and Customizing Impress
Impress Guide Chapter 11 Setting Up and Customizing Impress This PDF is designed to be read onscreen, two pages at a time. If you want to print a copy, your PDF viewer should have an option for printing
More informationLinkMotion and CorelDraw 9, 10, 11, 12, X3, X4, X5, X6, X7 and X8:
LinkMotion and CorelDraw 9, 10, 11, 12, X3, X4, X5, X6, X7 and X8: After you install LinkMotion software and set up all settings launch CorelDraw software. Important notes: Solustan s LinkMotion driver
More informationBy PAD Product Development and Support Team
Release Note Of PAD 2 V6 Pattern Design By PAD Product Development and Support Team 1 PAD System is a trademark and a system developed by: PAD System International Limited. Flat A, 2/F, Cheung Wing Industrial
More informationLove is a Puzzle. This monogram combines PaintWork, Stitching and CrystalWorks for a truly unique style that pops!
Love is a Puzzle Created by Sylvain Bergeron This monogram combines PaintWork, Stitching and CrystalWorks for a truly unique style that pops! It also leverages existing resources provided with your DesignWorks
More informationTajima DGML by Pulse Software Version 2009 Setting Up The Software
Tajima DGML by Pulse Software Version 2009 Setting Up The Software Before we start to learn anything about the software, I will show you how to set up your screen to work with ease. Before we actually
More informationDesignWorks Software Workbook
DesignWorks Software Workbook Part 1: Beginner DesignWorks Workbook Table of Contents Introduction... 3 Getting Started... 4 Setting Your Options... 5 Things to Know... 7 Workspace Tour... 8 Icon Cheat
More informationHighline College. Office 2016 Video #01: Introduction to Office 2016 & Windows Explorer
Highline College Busn 216: Computer Applications for Business (Fun and Power with Computers) Office 2016 Video #01: Introduction to Office 2016 & Windows Explorer Topics: 1. Programs/Apps (application
More informationDA-CAD User Manual Dürkopp Adler AG
DA-CAD 5000 User Manual DA-CAD 5000 All rights reserved No parts of this work may be reproduced in any form or by any means - graphic, electronic, or mechanical, including photocopying, recording, taping,
More informationFall Leaves Andrea Mattina
Fall Leaves Andrea Mattina Before starting this project, we need to make sure we are working in millimeters. To change to millimeters, select View from the menu bar and scroll down to View Preferences.
More informationCreating Accessible Documents in Adobe Acrobat Pro 9
Creating Accessible Documents in Adobe Acrobat Pro 9 Create an Electronic Copy of the Book 1. Remove the binding from the book so it can be placed in an automatic document feeder. This requires a fairly
More informationwiemarc 5.2 Manual Labeling Software wiemarc 5.2
wiemarc 5.2 Manual Labeling Software wiemarc 5.2 Page 1 of 67 Release: February 16, 2016 Manual labeling software 5.2 Table of contents 1. System requirements 2. Software installation 3. Output devices
More informationTrademarks. Installing TES Viewer:
User s Manual Viewer Trademarks BARUDAN has made all possible efforts to supply trademark information about company names, products and services mentioned in this manual. Trademarks indicated below were
More informationManual one2edit Version April 2015
Manual one2edit Version April 2015 1 Table of contents Page 3 Page 4 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 20 Page 21 Page 22 Page 23
More informationCopyright Notice. Trademarks
Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording,
More informationContent HELP FOR EPCWIN 10. Introduction 10. General 10. Terms and background information 11. First steps 11. Shortcut keys for EPCwin 18
ZSK Stickmaschinen GmbH EPCwin 3.0 Seite 1 von 250 Content HELP FOR EPCWIN 10 Introduction 10 General 10 Terms and background information 11 First steps 11 Shortcut keys for EPCwin 18 Monogram fonts 21
More informationDRAFT. Table of Contents About this manual... ix About CuteSITE Builder... ix. Getting Started... 1
DRAFT Table of Contents About this manual... ix About CuteSITE Builder... ix Getting Started... 1 Setting up... 1 System Requirements... 1 To install CuteSITE Builder... 1 To register CuteSITE Builder...
More informationWord - Basics. Course Description. Getting Started. Objectives. Editing a Document. Proofing a Document. Formatting Characters. Formatting Paragraphs
Course Description Word - Basics Word is a powerful word processing software package that will increase the productivity of any individual or corporation. It is ranked as one of the best word processors.
More informationLaser Machine User Manual:
Laser Machine User Manual: OPERATOR ( EasyCut / LaserCut version 5.3 ) v1.0 CTR Laser Machine Operator Manual ( EasyCut version 5.3 ) ~ version 1.0 1 CONTENTS Section 1: Tutorials...5 1.1. How to Cut with
More informationScheme Editor. Version 6.3. Manual Edition 1
Scheme Editor Version 6.3 Manual Edition 1 Bosch Rexroth AG Print Title Type of Documentation Document Typecode Internal File Reference Scheme Editor Version 6.3 Manual Print RS-0361ea845ef863400a6846a0010a9c70-19-en-US-3
More informationImpress Guide. Chapter 11 Setting Up and Customizing Impress
Impress Guide Chapter 11 Setting Up and Customizing Impress Copyright This document is Copyright 2007 2013 by its contributors as listed below. You may distribute it and/or modify it under the terms of
More informationFILE MENU New Starts a New Blank Canvas Open- Allows you to import designs into the program. Close- Closes the current Design
1 Quick Start Guide This guide is intended to give you an overview of the function of the program. The guide is arranged by section, Each section corresponds to the different pulldown menus in the program.
More informationSPRECON-E Display Editor
SPRECON-E Display Editor Version 2.0b USERS MANUAL 94.2.912.60en 09/2004 ISSUE A page 2 / 61 Business Sector Enery Station Automation (ENA) [Power systems automation] Sprecher Automation GmbH Franckstrasse
More informationPART I GravoStyle5-Laser Introduction
PART I GravoStyle5-Laser Introduction I. INTRO GravoStyle 5 Laser is designed is a component of GravoStyle5 for use with the Gravograph/New Hermes and other manufacturer Laser Engravers. Combined with
More informationEXCEL BASICS: MICROSOFT OFFICE 2007
EXCEL BASICS: MICROSOFT OFFICE 2007 GETTING STARTED PAGE 02 Prerequisites What You Will Learn USING MICROSOFT EXCEL PAGE 03 Opening Microsoft Excel Microsoft Excel Features Keyboard Review Pointer Shapes
More informationCPM-200 User Guide For Lighthouse for MAX
CPM-200 User Guide For Lighthouse for MAX Contents Page Number Opening the software 2 Altering the page size & Orientation 3-4 Inserting Text 5 Editing Text 6 Inserting Graphics 7-8 Changing the Colour
More informationJUSTCROFT INTERNATIONAL PRINTING AND PLOTTING SOLUTIONS. JustCGM 5.0 User Manual
JUSTCROFT INTERNATIONAL PRINTING AND PLOTTING SOLUTIONS JustCGM 5.0 User Manual Justcroft International JustCGM 5.0 User Manual Revision: 1.5, March 7, 2012 Copyright 2011-2012 Justcroft International
More informationMelco. AutoFont User Guide for Embroidery Font Creation. AutoFont converts... Embroidery Systems A Saurer Group Company. Letters.
AutoFont User Guide for Embroidery Font Creation AutoFont converts... To Letters Lettering Automatic Alphabet generation for EDS III Convenient controls Powerful editing tools Compatible with TrueType
More informationIntroduction to version Instruction date
Introduction to version 1.1.0 Instruction date 16.5.2008 Windows and Files Start by creating the window Open FCS data file By right-clicking the axis the list of available parameters appear. Right-click
More informationMIMAKI ENGINEERING CO., LTD.
For Windows XP/Windows 2000 Cutting Application Software SimpleCut Operation Manual MIMAKI ENGINEERING CO., LTD. D201463 Contents Introduction 1 About this Manual 2 Chapter 1 Installation Procedure 3
More informationDr.Engrave USER'S MANUAL
Dr.Engrave USER'S MANUAL This document is the operation manual for Dr. Engrave for Windows, a program for plate engraving. Contents Introduction... 4 Operating environment... 5 Overview of Dr.Engrave...
More informationEasy Windows Working with Disks, Folders, - and Files
Easy Windows 98-3 - Working with Disks, Folders, - and Files Page 1 of 11 Easy Windows 98-3 - Working with Disks, Folders, - and Files Task 1: Opening Folders Folders contain files, programs, or other
More informationHandout Objectives: a. b. c. d. 3. a. b. c. d. e a. b. 6. a. b. c. d. Overview:
Computer Basics I Handout Objectives: 1. Control program windows and menus. 2. Graphical user interface (GUI) a. Desktop b. Manage Windows c. Recycle Bin d. Creating a New Folder 3. Control Panel. a. Appearance
More informationUSER GUIDE QUICK REFERENCE
USER GUIDE QUICK REFERENCE CONTENTS Menus... 1 File menu... 1 Edit menu... 2 View menu... 3 Arrange menu... 4 Machine menu... 4 Design Settings menu... 4 Software Settings menu... 5 Window menu... 5 Toolbars...
More informationTemplates Manual one2edit Version July 2016
Templates Manual one2edit Version July 2016 1 Table of Contents Page 03 Page 04 Page 06 Page 07 Page 09 Page 10 Page 12 Page 13 Page 14 Page 16 Page 17 Page 18 Page 19 Page 20 Login Template Job List Editing
More informationInstallation Instructions & What s New with CreativeStudio 7.0
Installation Instructions & What s New with CreativeStudio 7.0 Installation Instructions Gammill is pleased to announce CreativeStudio Version 7.0 which is available at www.gammill.com/creativestudio7
More informationAdobe InDesign CS6 Tutorial
Adobe InDesign CS6 Tutorial Adobe InDesign CS6 is a page-layout software that takes print publishing and page design beyond current boundaries. InDesign is a desktop publishing program that incorporates
More informationTutorial 1 Engraved Brass Plate R
Getting Started With Tutorial 1 Engraved Brass Plate R4-090123 Table of Contents What is V-Carving?... 2 What the software allows you to do... 3 What file formats can be used?... 3 Getting Help... 3 Overview
More informationChapter 16. Version 1.5 Features. Contents: Chapter 16
Chapter 16 Version 1.5 Features Contents: New Version 1.5 Screen Overview...p.16-2 View Preferences - New Hoop Settings...p.16-2 View Preferences - New Canvas Settings... p.16-11 Keyboard Shortcuts...p.16-13
More informationScan November 30, 2011
Scan November 30, 2011 2170 Georgina Avenue Santa Monica, CA 90402 800-972-3027 www.rco.com Table of Contents 1 Introduction... 1 2 Document History... 2 3 Install and Uninstall... 3 4 Understanding the
More informationWilcom EmbroideryStudio e4.1 Update 2. Release Notes
Wilcom EmbroideryStudio e4.1 Update 2 Release Notes 30 April 2018 This file contains notes on the Wilcom EmbroideryStudio e4.1 Update 2 release. This update is intended for installation with any released
More informationDocumentation Colibrico Design Studio
1 / 39 Documentation Colibrico Design Studio Table of content About Colibrico Design Studio...3 System requirements...3 Supported languages...3 Installation...3 Trial version...4 License...4 Registration...4
More informationEXCEL BASICS: MICROSOFT OFFICE 2010
EXCEL BASICS: MICROSOFT OFFICE 2010 GETTING STARTED PAGE 02 Prerequisites What You Will Learn USING MICROSOFT EXCEL PAGE 03 Opening Microsoft Excel Microsoft Excel Features Keyboard Review Pointer Shapes
More information40. Sim Module - Common Tools
HSC Sim Common Tools 15021-ORC-J 1 (33) 40. Sim Module - Common Tools Table of Contents 40.1. Drawing flowsheets and adding tables to flowsheets... 2 40.1.1. Drawing units... 2 40.1.2. Drawing streams...
More informationARTLink 8 Basics JUST EMBROIDER IT! BERNINA ebook Series. Written by: Debbie Lashbrook, BERNINA Educator Software Specialist
BERNINA ebook Series JUST EMBROIDER IT! ARTLink 8 Basics Written by: Debbie Lashbrook, BERNINA Educator Software Specialist Basic Features Open and View Designs Modify Designs Print a Template Send Designs
More informationECDL Module 6 REFERENCE MANUAL
ECDL Module 6 REFERENCE MANUAL Presentation Microsoft PowerPoint XP Edition for ECDL Syllabus Four PAGE 2 - ECDL MODULE 6 (USING POWERPOINT XP) - MANUAL 6.1 GETTING STARTED... 4 6.1.1 FIRST STEPS WITH
More informationZSK Stickmaschinen GmbH. T8 Operating Unit User Manual
ZSK Stickmaschinen GmbH T8 Operating Unit User Manual Inhalt General Settings Reset... 6 Install mouse... 6 Design from internet... 6 Change T8 Computer... 7 Base Setting... 8 i-button The meaning of button...
More informationIntroducing Gupta Report Builder
Business Reporting Chapter 1 Introducing Gupta Report Builder You can use Report Builder to design reports. This chapter describes: Our approach to building reports. Some of the reports you can build.
More informationAcrobat X Professional
Acrobat X Professional Toolbar Well Page Navigations/Page Indicator Buttons for paging through document Scroll Bar/box page indicator appears when using the scroll button to navigate. When you release
More informationIntroduction To Inkscape Creating Custom Graphics For Websites, Displays & Lessons
Introduction To Inkscape Creating Custom Graphics For Websites, Displays & Lessons The Inkscape Program Inkscape is a free, but very powerful vector graphics program. Available for all computer formats
More informationSoftware User s Manual
1 About the manual 2 Navigating the manual 2 3 Opening the control panel 3 Control panel overview 4 Control panel settings 5 Calibrating the interactive pen display 6 Adjusting frequency and tracking (VGA
More informationRCM-1201PT Operating Manual
RCM-1201PT Operating Manual Index INDEX Part I Features...1 Part II Control and Basic Operations...5 2.1 CONTROL PANEL...5 2.2 MAIN SCREEN...7 2.3 DEFINITION AND BASIC OPERATION OF KEYS...10 2.4 INDICATOR
More informationTruEmbroidery Software Program
1 Page Get to Know TruE Studio, an Application of the TruEmbroidery Software Program By Janie Lantz TruE Studio gives you tools to create quick designs or combine existing embroideries. Save as unmerged
More informationCopyright 2004, Mighty Computer Services
EZ-GRAPH DATABASE PROGRAM MANUAL Copyright 2004, Mighty Computer Services The Table of Contents is located at the end of this document. I. Purpose EZ-Graph Database makes it easy to draw and maintain basic
More informationfile://c:\dokumente und Einstellungen\Lot\Lokale Einstellungen\Temp\~hhD434.htm
Seite 1 von 56 Welcome to splan 7.0 splan is an easy-to-handle and comfortable CAD-software, developed for electronic and electric circuit diagrams. Dragging and dropping components from the library to
More informationOpen. Select the database and click. Print. Set printing options using the dropdown menus, then click the
The Original Quick Reference Guides Microsoft Access 2010 Access is a tool for creating and managing databases collections of related records structured in an easily accessible format such as a table,
More informationWilcom EmbroideryStudio e4.1 Update 4. Release Notes
Wilcom EmbroideryStudio e4.1 Update 4 Release Notes 17 July 2018 This file contains notes on the Wilcom EmbroideryStudio e4.1 Update 4 release. This update is intended for installation with any released
More informationMicrosoft Windows 10. Quick Reference. Watsonia Publishing 47 Greenaway Street Bulleen VIC 3105 Australia
Watsonia Publishing 47 Greenaway Street Bulleen VIC 3105 Australia www.watsoniapublishing.com info@watsoniapublishing.com Quick Reference Course Code: INF1440 Table of Contents Chapter 1: Starting With
More informationIndex. Part I Features 1. Part II Control and Basic Operations Control Panel Main Screen 9
Index Index Part I Features 1 Part II Control and Basic Operations 6 2.1 Control Panel 6 2.2 Main Screen 9 2.3 Definition and Basic Operation of Keys 12 2.4 Indicator Light of Main Shaft Stop Position
More informationONYX 12 Finishing Tools
WHITE PAPER ONYX 12 ONYX 12 Finishing Tools ONYX 12 provides the ability to add bleed and grommets to any job. They are a part of the new Finishing tools. This document explains how to use bleed and grommets.
More informationAnleitungen für Word 2016 als Word-Dokument zum Ausdrucken und fürs Intranet
Anleitungen für Word 2016 als Word-Dokument zum Ausdrucken und fürs Intranet 19 Text and Tabs Tabs (tab stops) help you to write a list, for example, for an order or invoice. Larger spaces should not be
More informationENVI Tutorial: Map Composition
ENVI Tutorial: Map Composition Table of Contents OVERVIEW OF THIS TUTORIAL...3 MAP COMPOSITION IN ENVI...4 Open and Display Landsat TM Data...4 Build the QuickMap Template...4 MAP ELEMENTS...6 Adding Virtual
More informationEmbird Manual (part 3)
Embird Manual (part 3) 2004 by Ladislav Balara, Embird 1st edition October 27, 2004 All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means
More informationSupport - Software Lessons Drawmate v. 9
Support - Software Lessons Drawmate v. 9 Two Color Text for the Ioline 301 Program This lesson is designed to show you how to send a two color text design to the Ioline 301 program and set up the options
More informationEmbird Manual (part 2)
Embird Manual (part 2) 2003 by Ladislav Balara, Embird 1st edition August 28, 2003 All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means
More informationPARTS OF A WORKSHEET. Rows Run horizontally across a worksheet and are labeled with numbers.
1 BEGINNING EXCEL While its primary function is to be a number cruncher, Excel is a versatile program that is used in a variety of ways. Because it easily organizes, manages, and displays information,
More informationGetting Started 07 / 2012
Getting Started 07 / 2012 Copyright 2012 EPLAN Software & Service GmbH & Co. KG EPLAN Software & Service GmbH & Co. KG assumes no liability for either technical or printing errors, or for deficiencies
More informationSimpleView 5.1 MANUAL.
SimpleView 5.1 MANUAL www.simpleindex.com Revised January, 2013 Table of Contents - 2 - SimpleView Documentation 1 Introduction... 5 1.1 File-Based Document Management with SimpleView... 5 1.2 Image Quality
More informationDigitizing a Logo. Supplies. Software Instructions:
Digitizing a Logo Created by Debbi Lashbrook Use the tools of BERNINA Embroidery Software 7 to create a logo from a converted vector image; then feature your logo on Bella Nonna s Zippety Wine Bag. Supplies
More informationDesign Combine. From Created by 10/2013
Design Combine From www.bowsandclothes.com Created by www.rocketfueltech.com 10/2013 Design Combine is a program that allows you to merge multiple PES together and save it as one file in a 4x4, 5x7, or
More information6D Embroidery Software - Pretty Paisleys
6D Embroidery Software - Pretty Paisleys By: Soni Grint Learn what type of picture is best to use for a background while digitizing these pretty paisleys. Adjust the picture as needed before placing stitches.
More informationWith ClaroIdeas you can quickly and easily create idea maps using a combination of words, symbols and pictures.
Welcome to ClaroIdeas ClaroIdeas is a fresh tool to support the creation and editing of concept maps or idea maps using visual and audio components. It has been specifically developed to support people
More informationStickFont Editor v1.01 User Manual. Copyright 2012 NCPlot Software LLC
StickFont Editor v1.01 User Manual Copyright 2012 NCPlot Software LLC StickFont Editor Manual Table of Contents Welcome... 1 Registering StickFont Editor... 3 Getting Started... 5 Getting Started...
More informationMastering Your. CutWork Software V.1. Owner s Workbook
Mastering Your CutWork Software V.1 Owner s Workbook MASTERING YOUR BERNINA CUTWORK SOFTWARE 2010 1 CutWork Table of Contents Introduction... 3 Product Registration... 4 Getting Started... 5 Review of
More informationLetters Letters Letters
Letters Letters Letters In 5D Embroidery Extra By Janie Lantz, Software Education Specialist Software Modules Used: 5D Embroidery Extra Software Lettering is one of the most frequently used tools in our
More informationThe Fundamentals. Document Basics
3 The Fundamentals Opening a Program... 3 Similarities in All Programs... 3 It's On Now What?...4 Making things easier to see.. 4 Adjusting Text Size.....4 My Computer. 4 Control Panel... 5 Accessibility
More informationNiceLabel Designer Standard User Guide
NiceLabel Designer Standard User Guide English Edition Rev-1112 2012 Euro Plus d.o.o. All rights reserved. Euro Plus d.o.o. Poslovna cona A 2 SI-4208 Šenčur, Slovenia tel.: +386 4 280 50 00 fax: +386 4
More informationMicrosoft Excel Important Notice
Microsoft Excel 2013 Important Notice All candidates who follow an ICDL/ECDL course must have an official ICDL/ECDL Registration Number (which is proof of your Profile Number with ICDL/ECDL and will track
More informationTLMC SHORT CLASS: THESIS FORMATTING
Table of Contents Introduction... 2 Getting Help... 2 Tips... 2 Working with Styles... 3 Applying a Style... 3 Creating A New Style... 3 Setting Margins... 4 Adding Page Numbers... 5 Step 1: Using Sections
More informationQuick Start Guide for EOS / TES
1 Quick Start Guide for EOS / TES (If you are not comfortable with the basic functions of a computer, seek local assistance before proceeding.) How to install EOS/TES Important: for Windows 2000 or XP
More informationMICROSOFT WORD 2010 Quick Reference Guide
MICROSOFT WORD 2010 Quick Reference Guide Word Processing What is Word Processing? How is Word 2010 different from previous versions? Using a computer program, such as Microsoft Word, to create and edit
More informationUsing the Computer & Managing Files Part 2
Using the Computer & Managing Files Part 2 Using the Computer & Managing Files...65 Example 1 File compression, or zipping...66 Exercise 1 Download and install software...66 Exercise 2 Understand file
More information