CASE DIMENSIONS: millimeters (inches)
|
|
|
- Ophelia Walsh
- 6 years ago
- Views:
Transcription
1 Low TACmicrochip FEATURES Low TACmicrochip capacitor Smallest and low profile tantalum CV range: μF / 3-25V 4 case sizes available Power supply applications LEAD-FREE COMPATI- BLE COMPONENT APPLICATIONS Portable controller with elevated power requirements L S Lt W MARKING H H, K, L, R CASE POLARITY BAND NOT TO EXCEED CENTER LINE CASE DIMENSIONS: millimeters (inches) Code EIA EIA L+0.20 (0.008) W+0.15 (0.008) H+0.15 (0.008) Termination Code Metric (0.000) (0.000) (0.000) Spacing(S) % % Minimum Termination Length (Lt) H (0.079) 1.35 (0.053) 1.00 (0.039) max 0.70 (0.028) min 0.15 (0.006) K (0.039) (0.016) min 0.10 (0.004) ( ) ( ) L (0.063) 0.85 (0.033) 0.85 (0.033) 0.55 (0.022) min 0.15 (0.006) R (0.079) 1.35 (0.053) 1.35 (0.053) 0.70 (0.028) min 0.15 (0.006) Polarity Band (Anode+) HOW TO ORDER TPC R 106 * 010 R 1800 Type TACmicrochip Case Size See table above Capacitance Code pf code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Tolerance K=±10% M=±20% Rated DC 003=3Vdc 004=4Vdc 006=6.3Vdc 010=10Vdc 016=16Vdc 020=20Vdc 025=25Vdc Packaging R, P = 7" Standard Tin Termination Plastic Tape X, Q = 4 1 4" Standard Tin Termination Plastic Tape A, M = 7" Gold Termination Plastic Tape F, N = 4 1 4" Gold Termination Plastic Tape in mω TECHNICAL SPECIFICATIONS Technical Data: All technical data relate to an ambient temperature of +25 C Capacitance Range: 1.0 μf to 100 μf Capacitance Tolerance: ±10%; ±20% Leakage Current : 0.01CV or 0.5μA whichever is the greater Rated (V R ) +85 C: Category (V C ) +125 C: (V S ) +85 C: (V S ) +125 C: Range: -55 C to +125 C Reliability: 1% per 1000 hours at 85 C, V R with 0.1Ω/V series impedance, 60% confidence level Termination Finish: Tin Plating over Nickel (standard), Gold Plating over Nickel option available upon request
2 Low TACmicrochip CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance Rating DC (V R ) at 85 C μf Code 3.0V 4.0V 6.3V 10V 16V 20V 25V L(5000) R(3000) K(8000)/L(5000) L(5000) L(5000) L(5000) K(8000) L(5000) R(2000) L(4000) H(2500) L(4000),R(1800) R(1800) R(1800) R(1500) L(5000)/R(1800) R(1500) R(1500) R(1800) H(1500)/R(1500) R(1500) R(1500) R(1800) R(1000) Codes shown are examples of values offered on certain CV and case size. Other codes and values available upon request. Released ratings, ( ratings in mohms in parentheses) Note: ratings are minimum values. AVX reserves the right to supply higher voltage ratings in the same case size, to the same reliability standards. RATINGS & PART NUMBER REFERENCE AVX Case Capacitance Rated Rated Category Category Max. 100kHz RMS Current (A) Product Part No. Size (μf) Max. 100kHz (V) (ºC) (V) (ºC) (μa) (%) (mω) 25ºC 85ºC 125ºC Category MSL 3 85 C TPCK475*003#8000 K TPCR336*003#1800 R TPCR476*003#1500 R C TPCL226*004#5000 L TPCR226*004#1800 R TPCH336*004#1500 H TPCR336*004#1500 R TPCR107*004#1000 R C TPCK225*006#8000 K TPCL225*006#5000 L TPCL106*006#4000 L TPCR156*006#1800 R TPCR226*006#1500 R TPCR476*006#1800 R C TPCL105*010#5000 L TPCL225*010#5000 L TPCL335*010#5000 L TPCL475*010#5000 L TPCH106*010#2500 H TPCL106*010#4000 L TPCR106*010#1800 R TPCR156*010#1500 R TPCR226*010#1500 R TPCR336*010#1500 R C TPCL225*016#5000 L TPCR106*016#1800 R C TPCR475*020#2000 R C TPCR105*025#3000 R Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25 C. Capacitance and are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. is measured at rated voltage after 5 minutes. For typical weight and composition see page 269. NOTE: AVX reserves the right to supply higher voltage ratings or tighter tolerance part in the same case size, to the same reliability standards
3 Low TACmicrochip QUALIFICATION TABLE CATEGORY 1 temperature for 1-2 hours TPC series ( range -55ºC to +125ºC) 1.25 x within ±5% of initial value 1.2 x 1.2 x IL* n/a IL* 10 x IL* 12.5 x IL* IL* n/a +0/-10% ±5% +10/-0% +15/-0% ±5% IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* IL* IL* 1.25 x IL* IL* 1.25 x IL* 2 x IL* IL* QUALIFICATION TABLE CATEGORY 2 temperature for 1-2 hours TPC series ( range -55ºC to +125ºC) 1.25 x within ±15% of initial value 1.2 x 1.2 x IL* n/a IL* 10 x IL* 12.5 x IL* IL* n/a +0/-15% ±5% +15/-0% +20/-0% ±5% IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* IL* IL* 1.25 x IL* IL* 1.25 x IL* 2 x IL* IL* within ±15% of initial value
4 Low TACmicrochip QUALIFICATION TABLE CATEGORY 3 temperature for 1-2 hours TPC series ( range -55ºC to +125ºC) 1.25 x 2 x 1.25 x IL* n/a IL* 10 x IL* 12.5 x IL* IL* n/a +0/-25% ±5% +20/-0% +25/-0% ±20% IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* 1.5 x IL* IL* 1.25 x IL* IL* 1.25 x IL* 2 x IL* 1.5 x IL* 2 x 2 x 2 x
5 Low TACmicrochip AVX SOLID ELECTROLYTIC CAPACITOR ROADMAP SERIES LINE UP: CONVENTIONAL SMD MnO
PCT 10 / 35 D K (optional)
FEATURES - Surface Mount (SMT) Tantalum Capacitors - Meets or Exceeds EIA 535 BAAC and IECQ standards (QC300801/US001, IS-28) - range: 0.1μF to 1500μF - Voltage range: 4 to 50 WVDC - Down sized, extended
Smaller. Low Impedance. Long Life
Miniature Sized, Low lmpedance, High Reliability For Switching Power Supplies Smaller case size and lower impedance than PM series. Low impedance and high reliability withstanding 0 hours to 000 hours.
Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, Low ESR
Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, Low ESR PERFORMANCE CHARACTERISTICS www.vishay.com/doc?40088 Operating Temperature: -55 C to +125 C (above 85 C, voltage derating is
CONDUCTIVE POLYMER CHIP CAPACITORS
Highest CV in Standard EIA Size Extremely Low Operating Temperature: -55 C to 125 C Polymer Cathode Technology High Frequency Capacitance Retention Non-Ignition Failure Mode Capacitance: 150 to 1500 F
Aluminum Electrolytic Capacitors (Radial Lead Type)
Radial ead Type Series : FS Type : A Features ow ESR, Miniaturized (1 size smaller than series FR) : 105 C 5000 h to 10000 h RoHS compliant Country of origin Malaysia Specifications Category temperature
500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 5V V Z tolerance selection of ± 5% Moisture sensitivity level: level, per J-STD-020 Compliant to RoHS directive
Type 168/185 Metallized Polyester Radial Lead Capacitors
Radial Box Metallized Polyester Capacitors for Automatic Insertion The Type 168/185 series radial lead metallized polyester box capacitors are available in bulk (Type 168) or on ammo pack or tape and reel
500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 5% Surface mounting device (SMD) type Moisture sensitivity level: level, per J-STD-020
Tantalum Chip Capacitors HighCap B45196H, B45198H
Construction Polar tantalum capacitors with solid electrolyte Conventional Ta-MnO 2 technology Flame-retardant plastic case (UL 94 V-0) Optionally tinned or gold-plated terminals Features Ultra-high volumetric
500mW, 2% Tolerance SMD Zener Diode
500mW, 2% Tolerance SMD Zener Diode FEATURES - Wide zener voltage range selection : 2.4V to 75V - Surface mount device type - Moisture sensitivity level - Pb free and RoHS compliant - V Z Tolerance Selection
Aluminum Electrolytic Capacitors (Radial Lead Type)
Radial ead Type Series : NHG Type : A Features : 1 C 1000 h to 2000 h RoHS compliant Specifications Category temperature range 55 C to +1 C 25 C to +1 C Rated voltage range 6.3 V.DC to 100 V.DC 160 V.DC
85 2,000Hrs assured. Solventproof ,000Hrs assured. MV MV-BP MVK-BP -40 ~ ~ Capacitance Tolerance ±20% (M) (at 20, 120Hz)
MV-BP Series 85 2,000Hrs assured. Vertical SMD type. Bi-Polarized EMV-BP Series : Ecological capacitors with the same characteristics as MV-BP Solventproof MVK-BP Series 105 1,000Hrs assured. Vertical
Film Chip Capacitors. PPS DIELECTRIC CB Series GENERAL DESCRIPTION ADVANTAGES APPLICATIONS PERFORMANCE CHARACTERISTICS
APPLICATIONS General purpose function in low voltage applications: Filtering, coupling, decoupling Time-constant Oscillation timing circuit Typical applications would be: Automotive (navigation system...)
Aluminum Electrolytic Capacitors SMD (Chip), High Temperature
Aluminum Electrolytic Capacitors SMD (Chip), High Temperature Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (L x W x H in mm) 25 C VALUE 8 x 8 x 0 to 8 x 8 x 2 Rated capacitance range, C R 0
Aluminum Capacitors Axial Standard Miniature
021 ASM Fig.1 Component outlines 041/043 ASH high voltage lower longer life 117 ASD CV-values 021 ASM 138 AML 105 C QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in mm) 4.5 x 10 to
Q SERIES. Proven Reliability NOW UL RECOGNIZED. ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS 100V to 0.5 Watts PRODUCT OVERVIEW MODELS
Proven Reliability Q SERIES ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS 100V to 10,000V @ 0.5 Watts PRODUCT OVER NOW UL RECOGNIZED VOLTAGE* 2 MODELS 100 VDC Q01 150 VDC Q015 PRODUCT DESCRIPTION The Q
Aluminum Electrolytic Capacitors Radial High Temperature Standard
Aluminum Electrolytic Capacitors Radial High Temperature Standard Longer life Higher temperature 038 RSU 105 C 125 C 140 RTM Lower Z Lower Z 150 RMI 146 RTI Fig. 1 QUICK REFERENCE DATA DESCRIPTION VALUE
500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide Zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 5% Compliant to RoHS directive 2011/65/EU and in accordance to WEEE 2002/96/EC
Aluminum Electrolytic Capacitors Radial Miniature, High Voltage
Aluminum Electrolytic Capacitors Radial Miniature, High Voltage low 148 RUS voltage Fig. 1 QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in mm) 10 x 12 to 18 x 35 Rated capacitance
Q SERIES. Proven Reliability NOW UL RECOGNIZED. ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS 100V to 0.5 and 1.25 Watts PRODUCT OVERVIEW
Proven Reliability Q SERIES ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS 100V to 10,000V @ 0.5 and 1.25 Watts PRODUCT OVERVIEW NOW UL RECOGNIZED PRODUCT DESCRIPTION The Q Series is a broad line of ultra-miniature,
Type SLP 105 C Snap-In Aluminum Electrolytic Best Value 105 C Snap-In Type
Type SLP is the best value package snap-in series for 05 ºC, 3000 h operation. This series is the most cost-effective choice for DC fltering and power supply applications where high temperature, long life
Aluminum Capacitors Power Printed Wiring Style
Aluminum Capacitors Power Printed Wiring Style FEATURES Very long useful life: 12 000 h at +85 C High ripple current capability High resistance to shock and vibration Polarized aluminum electrolytic capacitors,
Series. Applications Typical applications include decoupling and filtering in military, medical, and aerospace applications.
High Reliability COTS (CWR09/19/29 Style) T497 High Grade COTS MnO 2 Overview The KEMET T497 is designed for the COTS (Commercial Off-The-Shelf) requirements of military, medical, and aerospace applications.
Type MLP 85 ºC Flatpack, Ultra-Long Life, Aluminum Type MLP 85 C
Type MLP 85 C 1/2-Inch Height, 50-Year Life The MLP s high-energy storage and box-shape make it perfect for voltage holdup or filtering in military SEM-E modules, telecom circuit packs and computer cards.
Aluminum Electrolytic Capacitors Axial Standard Miniature
Aluminum Electrolytic Capacitors Axial Standard Miniature 041/043 ASH high voltage lower longer life 117 ASD CV-values 138 AML 105 C Fig. 1 QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø
Aluminum Capacitors Radial Long-Life, High Voltage 152 RMH
151 RLH BCcomponents Aluminum Capacitors 044 RSH 85 C 148 RUS miniaturized Fig.1 Component outline 151 RLH 105 C low voltage 048 RML QUICK REFERENCE DATA miniaturized 152 RMH DESCRIPTION VALUE Nominal
(Applicable output load) to 264 (see note 2) (see note 1) (2Aat75to264VAC) G3R-202SLN-US PCB Yes 2 A at 100 to 120 VDC. (2 A at 75 to 132 VDC)
Solid-state Relay Compact SSRs Ideal for Built-in Applications Vertical, compact SSRs with an operation indicator offered in versatile variations. Can be mounted side by side with an electromagnetic relay
Aluminum Capacitors Power Printed Wiring Style
Not Available for New Designs, Use 050 PED-PW www.vishay.com Aluminum Capacitors Power Printed Wiring Style FEATURES Very long useful life: 15 000 h at +85 C High ripple current capability High resistance
RH R13. Description: USB 3.0 Over RJ45 Through Hole 10/100/1000 Base-T Contact Area : 30μ Gold LED:L-Green/Orange;R-Yellow
To: Customer P/N: UDE P/N: Description: USB 3.0 Over RJ45 Through Hole 10/100/1000 Base-T Contact Area : 30μ Gold LED:L-Green/Orange;R-Yellow Spec No. RH20006-00 Update Date 2014/8/27 Revision C Approved
User Selectable Up to Two Frequencies LVDS, LVPECL OR CMOS. 6 Pad Standard Package
MVQI Series 5X7 Ceramic SMD VCXO User Selectable Up to Two Frequencies LVDS, LVPECL OR CMOS 6 Pad Standard Package OneClock Range CMOS Range LVDS & LVPECL Temperature Stability* Operating Temperature Range
Aluminum Capacitors Radial Style 125 C
EKL Obsolete - Partly replaceable by 140 RTM (28322) FEATURES Polarized aluminum electrolytic capacitor Long lifetime High temperature range up to 125 C Low impedance High reliability APPLICATIONS Component
DC/DC Converters. TSM Series, 1 Watt. Features. Models
TSM Series, Watt Features SMD package (SOIC-4/8) Construction in lead frame technology Isolated single and dual output I/O isolation 000 VDC High efficiency Operating temperature 40 C to +85 C Reflow solder
Q SERIES. Proven Reliability NOW UL RECOGNIZED. ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS 100V to 0.5 and 1.25 Watts PRODUCT OVERVIEW
Proven Reliability Q SERIES ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS 100V to 10,000V @ 0.5 and 1.25 Watts PRODUCT OVER NOW UL RECOGNIZED PRODUCT DESCRIPTION The Q Series is a broad line of ultra-miniature,
Aluminum Capacitors Radial Style
Obsolete - Partly replaceable by 134 RLP5 (28307) EKF Component outlines FEATURES Polarized aluminum electrolytic capacitor High CU product with miniature dimensions Temperature range 85 C APPLICATIONS
Specifications. Highlights
Low Impedance and Long-Life for Filtering, Bypassing and Power Supply Decoupling Using a ruggedized construction, type AFK_V withstands a 30 G vibration test and has 40% to 60% lower impedance, 30% to
500mW, 2% Tolerance Zener Diodes
500mW, 2% Tolerance Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 2% Compliant to RoHS directive 2011/65/EU and in accordance to WEEE 2002/96/EC Halogen-free
Aluminum Electrolytic Capacitors Radial Low Profile, 7 mm
Aluminum Electrolytic Capacitors Radial Low Profile, 7 mm ig.0 Component outlines. 038 RSU higher lower height 7 mm CV-values 5 mm ig. 1 134 RLP 5 QUICK REERENCE DATA DESCRIPTION VALUE Nominal case sizes
Silicon 5 Watt Zener Diodes
Compliant Silicon 5 Watt Zener Diodes DESCRIPTION The 1N5334Be3 through IN5388Be3 JEDEC registered series of axial-leaded 5.0 watt Zeners provides a voltage selection of 3.6 V to 200 V with different tolerances
Zener Voltage Regulators
Zener Voltage Regulators 200 mw SOD 323 Surface Mount This series of Zener diodes is packaged in a SOD 323 surface mount package that has a power dissipation of 200 mw. They are designed to provide voltage
Aluminum Capacitors Radial Standard Ultra Miniature
038 RSU Aluminum Capacitors EATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case, insulated with a blue vinyl sleeve RoHS COMPLIANT Pressure
500 mw SURFACE MOUNT ZENER DIODES
Available on commercial versions 0 mw SURFACE MOUNT ZENER DIODES DESCRIPTION Screening in reference to MIL-PRF-190 available The 1N4678UR-1 thru 1N4717UR-1 series of 0.5 watt glass surface mount DO-213AA
500 mw AXIAL-LEADED ZENER DIODES
Available on commercial versions 0 mw AXIAL-LEADED ZENER DIODES DESCRIPTION Screening in reference to MIL-PRF-190 available The series of 0.5 watt Zener voltage regulators provides a selection from 1.8
PT/PS SERIES SIP/SMD Package
FEATURES Industry Standard SIP or SMD Package 1 Watts of Output power 1500 Volts DC of isolation 10% input voltage ranges (5, 12, 24 Volts) Unregulated Outputs Up to 83 % Efficiency -40 C to +85 C temperature
VT-820 VT-820. Temperature Compensated Crystal Oscillator Previous Vectron Model VTM3. Description
VT-820 Temperature Compensated Crystal Oscillator Previous Vectron Model VTM3 VT-820 Description Vectron s VT-820 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine
500mW 5% Zener Diodes
MMSZ522B - MMSZ5262B 500mW 5% Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 5V VZ Tolerance Selection of ± 5% Surface device type mountin Compliant to RoHS directive 20/65/EU and in
Customer P/N: UDE P/N: RUK-ZZ Description:
To: Customer P/N: UDE P/N: Description: RJ45 Tab up over USB stack Through Hole 10/100/1000 Base-T Contact Area : 30μ'' min. Gold LED: L-Green/Orange;R-Yellow Spec No. RUK17006-00 Update Date 2017/6/7
Product Specification
USB A CONNECTOR 1 of 7 J 1.0 GENERAL This specification defines the performance, tests and quality requirements for the USB A connector. This document is composed of the following sections. 1. General
Type MLP 85 C Flatpack, Ultra Long Life, Aluminum Electrolytic Very Low Profile
The MLP s high-energy storage and box-shape make it perfect for voltage holdup or filtering in military SEM-E modules, telecom circuit packs and computer cards. The MLP delivers up to 20 joules of energy
Unit: mm. Less than 0.01 CV + 2 (after two minutes) 0.02 is added to each 1000µF increase over 1000µF
Page 76 Series High-Frequency, Extra Low-impedance Type Very high reliability, biodegradable.. High-frequency, Extra Low-impedanceType. Guaranteed for 5000 hours at 5 C (2000 hours for φ5 to φ) (3000 hours
Aluminum Capacitors Radial Standard Miniature FEATURES APPLICATIONS MARKING
037 RSM Aluminum Capacitors EATURES 013 RLC 038 RSU ig.1 Component outline. lower leakage current miniaturized lower height QUICK REERENCE DATA longer life high voltage 036 RSP 036 RSP 047 RMS 097 RLP
BAT42W/BAT43W SURFACE MOUNT SCHOTTKY BARRIER DIODE
Features: Low Turn-on Voltage Fast Switching PN Junction Guard Ring Transient and ESD Protection Designed for Surface Mount Application Plastic Material UL Recognition Flammability Classification 94V-O
Product Specification. Mezza-pede SMT Connector Low Profile 1.0mm Pitch
Mezza-pede SMT Connector Low Profile 1.0mm Pitch Rev. 1 December 7, 2016 1.0 Scope This product specification applies to 1.0mm pitch Mezza-pede SMT Connectors, designed for the mating and unmating of a
CR0603/CR0805/CR Chip Resistors
*RoHS COMPLIANT Features RoHS compliant* Power rating at 70 C: CR0603-0.10 W, CR0805-0.125 W, CR1206-0.25 W Tight tolerances of bottom electrode width Suitable for all types of soldering processes Three
Double metallized film pulse capacitor, polypropylene dielectric According to IEC Grade 1.1 Small sizes Replacing PHE427, PHE428
Double metallized film pulse capacitor, polypropylene dielectric According to IEC 60384-7 Grade. Small sizes Replacing PHE427, PHE428 L B TYPICAL APPLICATIONS CONSTRUCTION High frequency applications with
Model Number Structure
Solid State Relays CSM DS_E_3_1 Compact, Low-cost, SSR Switching 5 to 20 A Wide load voltage range: 75 to 264 VAC. Both 100-V and 200-V loads can be handled with the same model. Dedicated, compact aluminum
X2Y - series Surface-mount ceramic EMI filter
DISCRETE CERAMICS X2Y series Surface mount component June 2002 Rev 6 X2Y - series 2002 July 26 v1.07 www.yageo.com X2Y Series Table of Contents 1. Introduction, Benefits, Applications 2. Available Capacitances
Aluminum Capacitors Radial Low Profile, 7 mm
Aluminum Capacitors Radial Low Profile, 7 mm ig.0 Component outlines. 038 RSU higher lower height 7 mm CV-values 5 mm ig. 1 134 RLP 5 QUICK REERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in
ALUMINUM ELECTROLYTIC 6.3V to 100V
AUMINUM EECTROYTIC 6.3V to 100V NEV, NEH SERIES SUBMINIATURE MECHANICA SPECIFICATIONS (NEV: Radial ead, NEH: Axial eads) The NEV and NEH series subminiature aluminum electrolytic capacitors are especially
ML100SRI. Series. Ultra-Miniature, 1W High Isolation, SMT DC/DC Con vert ers. Key Features:
ML100SRI Ultra-Miniature, 1W High Isolation, SMT DC/DC Con vert ers Key Features: 1W Output Power Ultra-Miniature SMT Case 4,200 VDC Isolation Single & Dual Outputs -40ºC to +105ºC Operation Meets JEDEC
1N47- Series DO-41. Mechanical Data. Page <1> 18/07/08 V1.1
Features: Low profile package. Built-in strain relief. Glass passivated junction. Low inductance. Typical I R less than 5.0µA above 11V. High temperature soldering guaranteed: 260 C/10 seconds at terminals
Metal Oxide Varistor:TVB Series
Features. RoHS compliant 2. Available for SMT flow/reflow soldering 3. Low profile and space saving 4. Large capability to withstand high surge current 5. Low inductance construction with excellent response
AEM GcDiode TM ESD Suppressors
Part Number: ES0603V014BT, ES0402V014BT Features Glass ceramic monolithic structure Ultra low capacitance (0.25pF typical) Low leakage current (
Specifcations. Highlights - Rilled cans withstand high shock and vibration. - 2 times the ripple-current capability - High capacitance per can
click here to see hardware and mounting options Type 388 85 C Best Value, Screw Terminal, Aluminum Type 388 has twice the life of the 386 and twice the ripple-current capability. While the standard encasement
Common Mode Noise Filter. LCFE Series. Description. Features. Applications. 1210mm Size. Source Meter. LCR Meter (3GHz) Source Meter.
Description This specification covers the engineering requirements for both Common Mode Noise Filter (CMF) and ESD Protection, especially high speed differential serial interfaces, such as USB 3., USB
Electrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description is surge rated diode arrays designed to protect high speed data interfaces. It has been specifically designed to protect sensitive
SPRING-LOADED CONNECTORS PAD CONNECTORS
SPRING-LOADED CONNECTORS PAD CONNECTORS GENERAL SPECIFICATIONS The values listed below are general specs applying for Preci-Dip spring-loaded connectors. Please see individual catalog page for additional
Model Number Structure
Solid State Relays with Failure Detection Function G3PC CSM_G3PC_DS_E_1_1 Refer to Safety Precautions for All Solid State Relays. Detects failures in SSR used for heater temperature control and simultaneously
NMUSB202MC Powered Dual Port USB Data Isolator
www.murata-ps.com System voltage rail/ External adapter Power Isolated DC-DC Converter LDO Linear Regulator USB Power Switch Isolated USB Port 1 USB 2.0 Device FEATURES Isolated dual powered USB 2.0 compliant
500mW 5% Zener Diodes
5mW 5% Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 36V VZ Tolerance Selection of ± 5% Surface device type mountin Compliant to RoHS directive 211/65/EU and in accordance to WEEE 22/96/EC
Aluminum Electrolytic Capacitors Power Long Life 4-Terminal Snap-In
Aluminum Electrolytic Capacitors Power Long Life 4Terminal SnapIn FEATURES Very long useful life: 10 000 h at 85 C Polarized aluminum electrolytic capacitors, nonsolid electrolyte Large types, minimized
APM-40 SERIES FEATURES PRODUCT OVERVIEW. Model Selection Guide. Input Specifications. AC/DC Power Module 40W, Industrial & Medical Safety
FEATURES Fully encapsulated Plastic Case 3 Mounting Versions: - PCB Mounting with Solder Pins - Chassis Mounting with Screw Terminals - DIN-Rail Mounting Package Dimension 88.9x63.5x30.0 mm (PCB Version)
CPC2025NTR. 400V Dual Normally-Open Single-Pole 8-Pin SOIC OptoMOS Relay INTEGRATED CIRCUITS DIVISION
4V Dual Normally-Open Single-Pole 8-Pin SOIC OptoMOS Relay Parameter Rating Units Blocking Voltage 4 V P Current 1 ma rms / ma DC On-Resistance (max) LED Forward Current (to Activate) 2 ma Features V rms
SEMICONDUCTOR GENERAL DATA
MOTOROLA SEMICONDUCTOR TECHNICAL DATA 0 mw DO-35 Glass Zener Voltage Regulator Diodes GENERAL DATA APPLICABLE TO ALL SERIES IN THIS GROUP 0 Milliwatt Hermetically Sealed Glass Silicon Zener Diodes Specification
Electrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s SDT23CXXL02 series are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage
NMUSB2022PMC. 2 MOPP Powered Dual Port USB Data Isolator. FEATURES PRODUCT OVERVIEW
www.murata-ps.com FEATURES Isolated dual powered USB 2.0 compliant Surface mount module One upstream port, two isolated down stream ports Automatic switching between low (1.5Mbps) and full speed (12Mbps)
MLSEP*** Series. Multilayer Polymer ESD Suppressor. Features. Application. Electrical Characteristics
Features ESD protection for high speed data lines to IEC61000-4-2 ESD contact discharge typical 8KV, max 15KV IEC61000-4-2 ESD air discharge typical 15KV, max 25KV Protect four data lines Flow through
Surface Mount Multilayer Ceramic Chip Capacitors for Commodity Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Commodity Applications FEATURES Available from 0402 to 1210 body sizes Ultra stable C0G (NP0) dielectric High capacitance in X5R, X7R, Y5V For high
PM1206STR. AC Power Switch INTEGRATED CIRCUITS DIVISION
AC Power Switch Parameter Rating Units AC Operating Voltage 26 V rms Load Current 5 ma rms On-State Voltage Drop (I L =5mA rms ) 1.4 V rms Features Load Current up to.5a rms Blocking Voltages up to 6V
DIGITAL MULTIMETERS. Accuracy +5% Resolution 1pF Accessories Test leads, Manual, 9V Battery included Options ST-265, C-90, C W x 6 L x 1.
DIGITAL MULTIMETERS Model M-1700 Model M-2775 Diode and Transistor Test AC/DC Current to 10A Three Way Overload Protection Extra Large 1 display test Data Hold Transistor / Diode Test AC/DC Current to
Specification For 90 Watts Adapter Power Supply Model No: ADB002 Customer ID: 000G Revision: 4.0
Specification For 90 Watts Adapter Power Supply Model No: ADB002 Customer ID: 000G Revision: 4.0 Prepared By: Terry Liou Approved By: Jacky Chi PAGE 1 E. C. List 1.0 Original 2.0 Modify 8.3 Weight 3.0
Motocraft Multilayer Varistor
MLV1005 / 1608 SERIES ENGINEERING SPECIFICATION 1. SCOPE (1) Lead free type (2) SMD type zinc oxide based ceramic chip (3) Insulator over coat keeps excellent low and stable leakage current (4) Plating
CPC1511Y. Single-Pole, Normally Open Relay with Thermal Shutdown & Current Limiting INTEGRATED CIRCUITS DIVISION. Description
Single-Pole, Normally Open Relay with Thermal Shutdown & Current Limiting Parameter Rating Units Blocking Voltage 23 V P Load Current 4 ma DC /ma rms On-Resistance (max 4 Features Integrated Active Current-Limit
RH1-ZZ Description: RJ45 Over USB 3.0 Through Hole 10/100/1000 Base-T Contact Area : Gold Flash LED:L-Green/Orange;R-Orange
To: Customer P/N: UDE P/N: Description: RJ45 Over USB 3.0 Through Hole 10/100/1000 Base-T Contact Area : Gold Flash LED:L-Green/Orange;R-Orange Spec No. RH116037-00 Update Date 2016/11/1 Revision A Approved
Model Number Structure
ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-110020(India) Tel : 011-43797575 Fax : 011-43797574 E-mail : sales@ashalain.com Solid State Relays G3 @-VD CSM_G3F_G3FD_DS_E_2_1
R0.5S_D ECONOLINE. Features. 0.5 Watt SMD Isolated Single or Dual Output. Derating-Graph (Ambient Temperature) DC/DC-Converter with 3 year Warranty
Features Unregulated Converter 1 : 1 Input Range.W SMD Package Efficiency up to 8% Approved for Medical Applications 1kVDC and 3 kvdc Isolation Option Operating Temperature from -4 C to +1 C with 3 year
CHENMKO ENTERPRISE CO.,LTD
CHENMKO ENTERPRISE CO.,LTD SURFACE MOUNT ZENER SILICON PLANAR POWER ZENER DIODES VOLTAGE RANGE.V TO 9V MMPZBGP THRU MMPZBGP FEATURE * High temperature soldering type. * ESD rating of class (> kv) per human
74F00 Quad 2-Input NAND Gate
Quad 2-Input NAND Gate General Description This device contains four independent gates, each of which performs the logic NAND function. Ordering Code: December 1994 Revised September 2000 Order Number
M-Series. Lead Wire Length (H, mm)
Metal Film Fixed Resistor Specifications Per IEC 60115-1 MIL-R-10509 d L H D Features Conformal multi-layer coating Color code per MIL & EIA standards Special tin-plated electrolytic copper lead wire Products
SGM2020 Low Power, Low Dropout, RF - Linear Regulators
GENERAL DESCRIPTION The series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for low voltage, low power applications.
Surface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9 Title: Part Number: Description: MINI SAS Connectors Product Specification G40 Series 0.80mm Pitch, Cable End and Board Mount Revisions Control Rev. ECN
ESD4-DFN LOW CAPACITANCE TVS ARRAY PIN CONFIGURATION
LOW CAPACITANCE TVS ARRAY Description The is a multi-line, low capacitance, 7pF @ 2.5V bias transient voltage suppressor array. This device is designed to protect applications such as wireless telecommunication
PESDR0554S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Ordering Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS array, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
Please see the attached standard products list
Radial Lead Type Series: NHG Type: A Features Endurance : 105 C 1000 h to 2000 h RoHS directive compliant Specifi cations Category Temp. Range 55 C to +105 C 25 C to +105 C Rated Range 6.3 V.DC to 100
Specifcations. Highlights - Rilled cans withstand high shock and vibration - High ripple current capability - High capacitance per can
click here to see hardware and mounting options Type 386 85 C Aluminum Electrolytic, Screw Terminal While Type 386 s standard encasement is by compression with the capacitor element captured on an aluminum
Product Specification
Product Specification PR041-01 Revision A0 (Date 4-3-2017) Stewart Connector 11118 Susquehanna Trail South Glen Rock, Pa. 17327-9199 Ph: (717) 235-7512 Fax: (717) 235-4675 Product Specification PR0410-01
40,000-Count Dual-Display Handheld LCR Meters Models 878B, 879B, and 880
Data Sheet 40,000-Count Dual-Display Handheld LCR Meters Full Featured Handheld LCR Meters The 878B, 879B, and 880 40,000-count handheld LCR meters measure inductance, capacitance, and resistance quickly
0504A PESDR0504S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Marking Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS array, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
American Power Design, Inc.
American Power Design, Inc. FEATURES Customer Selects Output Voltage Single Outputs to + or - 12000 Vdc Dual Outputs to +/- 3000 Vdc High Reliability Industry Standard Pinouts Wide Temperature Range (-20
LCA110LSTR. Single Pole, Normally Open OptoMOS Relay INTEGRATED CIRCUITS DIVISION
LCA11L Single Pole, Normally Open OptoMOS Relay Parameter Ratings Units Blocking Voltage 3 V P Load Current 12 ma rms & ma DC On-Resistance (max 3 Features Built-in Current Limiting 37V rms Input/Output