Endura / Lenel OnGuard Integration Guide

Transcription

1 C O N F I G U R A T I O N Endura / Lenel OnGuard Integration Guide C5608M

2 2 C5608M

3 Important Notices LEGAL NOTICE Getting Started General Requirements Hardware Endura Components Software Installation Initial Steps Endura Video Server Endura Video Camera First Step Endura Video Server Overview Essential Tasks Other Tasks Creating an Endura Video Server Editing an Endura Video Server Deleting an Endura Video Server Endura Video Cameras Overview Essential Tasks Importing Cameras Adding an Endura Video Camera Editing Endura Video Camera General Settings Video View Pan, Tilt, Zoom Events C5608M 1

4 2 C5608M

5 Important Notices LEGAL NOTICE SOME PELCO EQUIPMENT CONTAINS, AND THE SOFTWARE ENABLES, AUDIO/VISUAL AND RECORDING CAPABILITIES, THE IMPROPER USE OF WHICH MAY SUBJECT YOU TO CIVIL AND CRIMINAL PENALTIES. APPLICABLE LAWS REGARDING THE USE OF SUCH CAPABILITIES VARY BETWEEN JURISDICTIONS AND MAY REQUIRE, AMONG OTHER THINGS, EXPRESS WRITTEN CONSENT FROM RECORDED SUBJECTS. YOU ARE SOLELY RESPONSIBLE FOR INSURING STRICT COMPLIANCE WITH SUCH LAWS AND FOR STRICT ADHERENCE TO ANY/ALL RIGHTS OF PRIVACY AND PERSONALTY. USE OF THIS EQUIPMENT AND/OR SOFTWARE FOR ILLEGAL SURVEILLANCE OR MONITORING SHALL BE DEEMED UNAUTHORIZED USE IN VIOLATION OF THE END USER SOFTWARE AGREEMENT AND RESULT IN THE IMMEDIATE TERMINATION OF YOUR LICENSE RIGHTS THEREUNDER. CxxxxM (xx/11) 3

6 Getting Started GENERAL REQUIREMENTS HARDWARE The minimum hardware requirements for the client machine to use for completing the steps outlined in this document are the following: CPU: Intel 2.4 Core 2 Duo (or higher) Memory: 2 GB GPU: DirectX9 Compatible; must be a dedicated card and not a motherboard integrated chip HD: 1 GB ENDURA COMPONENTS The Endura System is comprised of powerful components that seamlessly work in concert to deliver state-of-the-art IP-based video management. The following are Endura 2.x compatible components that are compatible with the Endura/Lenel OnGuard integration: DVR5300: Endura Digital Video Recorder EE500: Endura Express Recorder NET5301R: Endura Single Channel Decoder NET53xxT: Endura 1, 8 & 16 Channel MPEG4 Encoders NET5402R-HD: Endura High Definition Decoder NET540xT: Endura 1, 2, & 4 Channel H.264 Encoders NSM5200: Endura Network Storage Manager NVR5100: Endura Network Video Recorder SM5000: Endura System Manager VCD5202: Endura Video Console Display WS5200: Endura Workstation UDI5000: Endura Universal Device Interface SOFTWARE The software requirements for completing the steps outlined in this document are the following: Lenel OnGuard Windows XP, Windows Vista [32 bit / 64 bit], Windows Server 2003 [32 bit / 64 bit], Windows Server 2008 [32 bit / 64 bit], WIndows 7 [32 bit / 64 bit] DirectX 9.0 c Visual Studio C++ Runtime NOTE: This documentation s main focus is on the integration of Pelco IP products with the Lenel OnGuard. This documentation is not a replacement for general Lenel documentation. It is highly recommended that you review the following documentation and become familiar with Lenel OnGuard concepts before proceeding with this documentation Lenel documentation is available online on their website ( NOTE: Improper use of audio/visual recording equipment may subject you to civil and criminal penalties. Applicable laws regarding the use of such capabilities vary between jurisdictions and may require, among other things, express written consent from the recorded subjects. You are solely responsible for insuring strict compliance with such laws and for strict adherence to any/all rights of privacy and personalty. INSTALLATION WARNING: Lenel OnGuard cannot be installed on any machine containing an existing Pelco SDK installation. Once finished downloading the Endura Lenel Lenel OnGuard Integration installer, double click on the Endura Lenel Lenel OnGuard Integration installer to begin installation. Simply follow the onscreen prompts to complete installation. 4 CxxxxM (xx/11)

7 INITIAL STEPS While this documentation covers a wide variety of tasks, only the tasks listed below are essential to having a successful base integration between Lenel s Lenel OnGuard and Pelco s Endura system: FIRST STEP ENDURA VIDEO SERVER Adding an Endura Video Server: This both connects your Endura Video Server to the Lenel OnGuard, as well as importing all Endura Video Cameras associated with it into the Lenel OnGuard. ENDURA VIDEO CAMERA Accessing an Endura Video Camera s View: This allows you to take control of a successfully connected Endura Video Camera, giving you access to its stream and controls. Playback control for a Previously Recorded Stream: This entry details the steps needed to play back a very specific portion of recorded streams. Reconnecting the Camera: When you experience a loss of connection from a particular Endura Video Camera s stream, this entry will demonstrate how to restore it. Recording a Stream: This entry shows how to record an Endura Video Camera s current stream. Endura related functionality is located within a subsection of the Lenel OnGuard application. To access Endura related functionality, begin by starting the Lenel OnGuard application. Once Lenel OnGuard is started, access the Video menu and select the Digital Video... menu item. Figure 1. Digital Video menu item You should now have access to the portion of UI related to Pelco Endura. CxxxxM (xx/11) 5

8 Endura Video Server OVERVIEW Before we dive into the details of actually adding an Endura Video Server, we should provide some background. An Endura Video Server is better known as the Endura System Manager (SM). The SM is the heart of Endura, and responsible for the following: Managing devices such as cameras, decoders, and NVRs, including administering rights and privileges Storing device information, like status Administering users, which includes permissions management Logs errors and alarms Security key management ESSENTIAL TASKS The following is a list of essential tasks related to using the Endura Video Server: Creating a new Endura Video Server Configuring Endura VIdeo Server General Settings Configuring Endura VIdeo Server Alarm Settings OTHER TASKS The following is a list of other tasks related to the Endura Video Server: Editing an Existing Endura Video Server Deleting an Endura Video Server Deleting Multiple Endura Video Servers CREATING AN ENDURA VIDEO SERVER Begin adding an Endura Video Server by moving to the Digital Video section of Lenel OnGuard. For details please refer to the First Step entry, in the Getting Started section. To add an Endura system, first ensure that you are presently within the Video Recorder section denoted by the active tab on the top left of Lenel OnGuard. If not, click on the Video Recorder tab. Now click on the Add button on the bottom left of Lenel OnGuard. Figure 2. Adding an Endura system The form elements in the right portion of the screen should now be active, This form should contain fields regarding general Endura Video Server configuration settings. 6 CxxxxM (xx/11)

9 Figure 3. Endura Video Server configuration settings The following is describe the fields in General Settings : Name: The Endura Video Server s friendly name. Video Recorder Type: The type of video recorder, please select Generic Video. Workstation: This is the machine where the local machine resides. To select the proper machine, click on the Browse button. IP Address of Video Recorder: This is the Endura Video Server s network location. User Name: This is the desired username for as Endura Video Server authentication credentials. Password: This is the desired password for as Endura Video Server authentication credentials. Online: This checkbox determines whether or not the Endura Video Server is currently available. As an option, you can enter any relevant notes concerning this particular Endura Video Server in the Notes tab. Figure 4. Endura Video Server notes Once you have successfully entered the required Endura Video Server settings, click on the Ok button (on the bottom left of Lenel OnGuard) to verify the validity of your setting values, to connect the Lenel OnGuard to your Endura Video Server, and to save your new Endura Video Server settings. Figure 5. Click OK to verify and save new Endura settings Assuming that the Endura Video Server has already been successfully added, you should now see it in the left portion of Lenel OnGuard s Digital Video section. EDITING AN ENDURA VIDEO SERVER Figure 6. Successful addition of the Endura Video Server To edit an existing Endura VIdeo Server, just click on it to highlight it. Figure 7. Select an Endura Video Server to edit Now click on the Modify button in the bottom left of the Lenel OnGuard application. Figure 8. Click the Modify button to edit an Endura Video Server configuration CxxxxM (xx/11) 7

10 A dialog box displaying the Endura Video Server s saved settings will appear. This dialog box should contain forms regarding general Endura Video Server configuration settings, as well as settings for alarms (i.e. events). Figure 9. Endura Video Server configuration settings (It should be noted that only the Connection and Notes tabs are relevant for Endura Lenel Integration.) The following is describe the fields in General Settings : Name: The Endura Video Server s friendly name. Video Recorder Type: The type of video recorder, please select Generic Video. Workstation: This is the machine where the local machine resides. To select the proper machine, click on the Browse button. IP Address of Video Recorder: This is the Endura Video Server s network location. User Name: This is the desired username for as Endura Video Server authentication credentials. Password: This is the desired password for as Endura Video Server authentication credentials. Online: This checkbox determines whether or not the Endura Video Server is currently available. As an option, you can enter any relevant notes concerning this particular Endura Video Server in the Notes tab. Figure 10. Configruation notes for an Endura Video Server Once you have successfully entered the required Endura Video Server settings, click on the Ok button (on the bottom left of Lenel OnGuard) to both verify the validity of your setting values, to connect the Lenel OnGuard to your Endura Video Server, and to save your new Endura Video Server settings. DELETING AN ENDURA VIDEO SERVER To delete an existing Endura Video Server, click on the desired Endura Video Server to delete. Figure 11. Select an Endura Video Server to delete 8 CxxxxM (xx/11)

11 Now click on the Delete button in the bottom left of the Lenel OnGuard application and confirm the delete. Figure 12. Click the Delete button to delete an Endura Video Server CxxxxM (xx/11) 9

12 Endura Video Cameras OVERVIEW An Endura Video Camera simply describes Pelco IP video products such as IP cameras, or encoders. ESSENTIAL TASKS Adding an Endura Video Camera: This can be done in one of two ways: Using the Import Camera menu option, as described in the Importing Cameras entry below. Adding a single camera at a time, as described in the Adding an Endura Video Camera entry below. Editing Endura Video Camera General Settings Controlling an Endura Video Camera: Accessing an Endura Video Camera s View Take a Snapshot of the Current Video Frame Playback control for a Previously Recorded Stream Reconnecting the Camera IMPORTING CAMERAS It is highly recommended if you are using Endura Lenel Integration application that you import your cameras as opposed to manually adding them one at a time. Importing cameras will save a great deal of time. To begin importing cameras from a particular Endura Video Server, select the desired Endura Video Server by right clicking on it. Figure 13. Select an Endura Video Server to import cameras from the server A menu should appear. Select the Import from Recorder menu item, and cameras should start being imported from the Endura Video Server. Figure 14. Select Import from Recorder to import cameras If the import was successful, your cameras should appear in the Camera tab. ADDING AN ENDURA VIDEO CAMERA Figure 15. Successful camera import NOTE: Please be aware that any changes made in this application will not be reflected in Endura. All Pelco device changes must be made in Endura. 10 CxxxxM (xx/11)

13 To add an Endura Video Camera, first ensure that you are presently within the Camera section denoted by the active tab on the top left of Lenel OnGuard. If not, click on the Camera tab. Now click on the Add button on the bottom left of Lenel OnGuard. The video camera form should now be active. Figure 16. Select the Add button to make a camera active Figure 17. Active video camera form The following are settings for which you will need to provide values: Camera Type: This describes the type of Endura Video Camera. This field is automatically detected when initially adding the Endura Video Camera. Codec: The desired codec to utilize. Standard: The TV monitor standard where the stream will be displayed. IP Address: The Endura Video Camera s network location. Port: The Endura Video Camera s main port for general communication. Channel: The camera number. Optionally users can enter any relevant notes concerning this particular Endura Video Camera. Figure 18. Notes for an Endura Video Camera Once you have successfully entered the required Endura Video Camera settings, click on the Ok button (on the bottom left of Lenel OnGuard) to verify the validity of your setting values, to connect the Lenel OnGuard to your Endura Video Camera, and to save your new Endura Video Camera settings. Figure 19. Click OK to verify and save camera settings EDITING ENDURA VIDEO CAMERA GENERAL SETTINGS NOTE: Please be aware that any changes made in this application will not be reflected in Endura. All Pelco device changes must be made in Endura. CxxxxM (xx/11) 11

14 To edit an existing Endura Video Camera, first ensure that you are presently within the Camera section denoted by the active tab on the top left of Lenel OnGuard. Now click on the Endura Video Camera you would like to edit, in order to highlight it. Then click on the Modify button in the bottom left portion of the Lenel OnGuard application. The video camera forms should now be active. Figure 20. Click the Modify button to edit a camera Figure 21. Endura Video Camera settings The following are settings for which you will need to provide values: Camera Type: This describes the type of Endura Video Camera. This field is automatically detected when initially adding the Endura Video Camera. Codec: The desired codec to utilize. Standard: The TV monitor standard where the stream will be displayed. IP Address: The Endura Video Camera s network location. Port: The Endura Video Camera s main port for general communication. Camera Number: The particular camera to utilize. Optionally users can enter any relevant notes concerning this particular Endura Video Camera. Figure 22. Endura Video Camera notes Once you have successfully entered the required Endura Video Camera settings, click on the Ok button (on the bottom left of Lenel OnGuard) to verify the validity of your setting values, to connect the Lenel OnGuard to your Endura Video Camera, and to save your Endura Video Camera settings. Figure 23. Click OK to verify and save Endura Video Camera settings. 12 CxxxxM (xx/11)

15 VIDEO VIEW To view a video simply click on the desired camera, and its video will be displayed on the right portion of the screen. Figure 24. Video View display PAN, TILT, ZOOM To activate PTZ functionality, click on the Activate PTZ icon as shown in the below screenshot. Figure 25. Activate PTZ functionality You should now be able to control panning and tilting by holding down the left mouse button, while the cursor is over the video view portion of the application, and by moving your mouse in the desired direction. Zoom, iris control, and focus controls can now be found above the Camera Selection header; as shown in the screenshot below. Figure 26. Zoom, iris control, and focus controls CxxxxM (xx/11) 13

16 Events To view triggered events, simply access the Alarm Monitoring portion of the application. You should now be able to see events as they are triggered in real time. Figure 27. Viewing triggered events 14 CxxxxM (xx/11)

17 PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: Five years: Fiber optic products Unshielded Twisted Pair (UTP) transmission products CC3701H-2, CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and MC3651H-2X camera models Three years: Pelco-designed fixed network cameras and network dome cameras with Sarix technology. Pelco-branded fixed camera models (CCC1390H Series, C10DN Series, C10CH Series, and IP3701H Series) EH1500 Series enclosures Spectra IV products (including Spectra IV IP) Camclosure Series (IS, ICS, IP) integrated camera systems DX Series digital video recorders (except DX9000 Series which is covered for a period of one year), DVR5100 Series digital video recorders, Digital Sentry Series hardware products, DVX Series digital video recorders, and NVR300 Series network video recorders Endura Series distributed network-based video products Genex Series products (multiplexers, server, and keyboard) PMCL200/300/400 Series LCD monitors PMCL5xx Series FHD monitors Two years: Standard varifocal, fixed focal, and motorized zoom lenses DF5/DF8 Series fixed dome products Legacy Series integrated positioning systems Spectra III, Spectra Mini, Spectra Mini IP, Esprit, ExSite, and PS20 scanners, including when used in continuous motion applications. Esprit Ti and TI2500 Series thermal imaging products Esprit and WW5700 Series window wiper (excluding wiper blades). CM6700/CM6800/CM9700 Series matrix Digital Light Processing (DLP ) displays (except lamp and color wheel). The lamp and color wheel will be covered for a period of 90 days. The air filter is not covered under warranty. Intelli-M eidc controllers One year: Video cassette recorders (VCRs), except video heads. Video heads will be covered for a period of six months. Six months: All pan and tilts, scanners, or preset lenses used in continuous motion applications (preset scan, tour, and auto scan modes). Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco shipment. All goods requiring warranty repair shall be sent freight prepaid to a Pelco designated location. Repairs made necessary by reason of misuse, alteration, normal wear, or accident are not covered under this warranty. Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the Products. Pelco s liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party or product liability, relating to the Products shall not exceed the price paid by the Dealer to Pelco for such Products. In no event will Pelco be liable for any special, incidental, or consequential damages (including loss of use, loss of profit, and claims of third parties) however caused, whether by the negligence of Pelco or otherwise. The above warranty provides the Dealer with specific legal rights. The Dealer may also have additional rights, which are subject to variation from state to state. If a warranty repair is required, the Dealer must contact Pelco at (800) or (559) to obtain a Repair Authorization number (RA), and provide the following information: 1. Model and serial number 2. Date of shipment, P.O. number, sales order number, or Pelco invoice number 3. Details of the defect or problem If there is a dispute regarding the warranty of a product that does not fall under the warranty conditions stated above, please include a written explanation with the product when returned. Method of return shipment shall be the same or equal to the method by which the item was received by Pelco. RETURNS To expedite parts returned for repair or credit, please call Pelco at (800) or (559) to obtain an authorization number (CA number if returned for credit, and RA number if returned for repair) and designated return location. All merchandise returned for credit may be subject to a 20 percent restocking and refurbishing charge. Goods returned for repair or credit should be clearly identified with the assigned CA or RA number and freight should be prepaid REVISION HISTORY Manual # Date Comments C5608M A/11 Original version. Pelco, the Pelco logo, and other trademarks associated with Pelco products referred to in this publication are trademarks of Pelco, Inc. or its affiliates. All other product names and services are the property of their respective companies. Product specifications and availability are subject to change without notice. Copyright 2011, Pelco, Inc. All rights reserved.

18 Pelco by Schneider Electric 3500 Pelco Way Clovis, California United States USA & Canada Tel (800) Fax (800) International Tel +1 (559) Fax +1 (559)