TENSIONED DESCENDERPRO

Transcription

1 Motorized projection screen for ceiling recessed installations Product specifications: Ceiling recessed electrically operated projection screen 230 volt (50Hz) with a usage of no more than 3 Ampere (98.9 Watt). The motor is mounted on the left side in the steel casing with rubber dampers to reduce sound. The motor is mounted inside the roller, 4 wire, 26 rotations per minute, maintenance free, integrated brake and thermal overload cut-out. The 4 wire connection goes through the metal casing. The casing is galvanised on the inside and on the outside powder coated with a matte structure coating (RAL 9016). The roller with the projection surface is supplied fully mounted but can be removed on location for the protection of the projection surface. After installation the projection screen surface is reachable through the bottom of the casing. The bottom of the case can swing open through an easy and innovative unlocking mechanism. Install the screen case separate from the screen surface during the rough-in stages of construction. The Screen Surface Assembly includes the roller, motor and screen surface. The roller can be easily removed via a unique push-release mechanism. The triangular slat bar rolls into the case completely. The screen fabrics are flame retardant and seamless in the viewing area. Each side of the surface to have tab guide cable system to maintain even lateral tension and hold surface flat. Custom slat bar with added weight maintains vertical tension on the screen surface. The ends of the slat to be protected by heavy duty plastic caps enclosing a preset adjustable mechanism for screen tensioning. The projection fabrics have a black backing. Standard 3 position wall switch is supplied. The projection screen is CE marked and satisfies the strictest quality and safety requirements. Integrated RF receiver option: this version will have a 3 wire connection and will be supplied with a remote control. Options: RF - Radio frequency: Includes built-in radio frequency receiver, making it possible to operate the screen using the supplied remote control. Standard remote control is supplied when selected this option. Aspect Ratios: Available dimensions Minimum width: 180 cm Maximum width: 400 cm 172 P +31.(0) I I emea.sales@milestone.com 1

2 L1 L2 L VAW L4 128 Finished ceiling 172 Self-trimming flange Tensioned DescenderPro Viewing Area Dimensions (mm) cm L1 L2 L3 L x x x x : x x x x x x x x x x x : x x x x x x x P +31.(0) I I emea.sales@milestone.com 2

3 Available High Resolution projection surfaces HD Progressive : Black backing: GreenGuard certification: HD Progressive 0.9 : 0.9 Black backing: GreenGuard certification: HD Progressive 1.1 : 1.1 Black backing: GreenGuard certification: HD Progressive 1.3 : 1.3 Viewing Angle: 150 Black backing: GreenGuard certification: HD Progressive 1.1 Contrast : 1.1 Viewing Angle: 120 Black backing: GreenGuard certification: P +31.(0) I I emea.sales@milestone.com 3

4 Available high resolution rear projection surfaces Dual Vision : 0.9 Viewing Angle: 130 GreenGuard certification: Available perforated projection surfaces Rear Projection Front Projection HD Progressive 1.1 Perf : 1.1 Black backing: GreenGuard certification: Hole diameter: 0.7 mm Open area: 8.65% Matte White (tensioned) Projection Screen Available standard resolution projection surfaces Matte White : Viewing Angle: 120 Black backing: GreenGuard certification: Certifications Products are manufactured in an ISO14001 certified facility Projecta is an ISO 9001 certified company REACH - Registration, Evaluation, Authorisation and Restriction of Chemical substances. RoHS - Restriction of Hazardous Substances. WEEE - Waste Electronic and Electrical Equipment Regulations. Customisation Give exact the sizes of the projection screen you need: Viewing size: Heigth (cm.) x width (cm.) Surface: Border top: (cm.) Border bottom: (cm.) RAL color case and plastic parts: RAL Motor positioned on right side Remarks: P +31.(0) I I emea.sales@milestone.com 4

5 Accessories - control options For projection screens with a standard motor / delivered as standard with a wall switch - All-in-One Control Box, which contains: > Relay (dry contact) > RF control, including remote control > IR control, including remote control > Manual switch > 12v DC trigger - Power Sensing Trigger (need All-in-One Box to function) - Easy Install plug & play relaybox with potential free contacts > Easy Install plug & play RS232/RS422 control kit > Easy Install plug & play RS232/RS422 with IP control kit - Keyswitch For projection screens with an RF motor / delivered as standard with a remote control - RF wall-mounted transmitter (433,92 Mhz) - 4-channel RF remote control (433,92 Mhz) Accessories - installation - Ceiling brackets (100 cm.) - Set extension brackets (75 cm.) - Set extension brackets (30 cm.) DescenderPro - 2-step Installation After installation of the case, you can separately install the Screen Surface Assembly, which contains the roller, motor and screen surface. Warranty Projecta provides a limited 5 year warranty on the DescenderPro + Elpro Concept range and a limited 2 year warranty on all other products. The warranty on the motor of electrical screens is 5 year. All warranties are in effect beginning the date the product was invoiced by Projecta. P +31.(0) I I emea.sales@milestone.com 5