Standard Construction. Options and Accessories

Transcription

1 SP, SP-L, SP 22 ath and Inline ans SP SP UL/cUL eiling xhaust ans SP-90 and smaller and SP- are UL/cUL Listed for above bathtub/shower with I branch protected circuit. SP- is UL/cUL Listed UL/cUL Listed 507 is standard on In Stock models. SP is M Licensed for Sound and ir Performance UL/cUL abinet ans SP- and SP- are UL/cUL Listed. UL/cUL Listed 507 is standard on In Stock models. SP is M Licensed for ir Performance est vailable Program SP-50 SP-50 through 200 SP-50 through 1550 In Stock SP-110 through 200 SP-110 through 1550 SP-L50, SP-L0 1 ay SP-1750 through 600 SP-510-V, SP-710-V 5 ay SP-510-V, SP-710-V est vailable are 115 volt. SP and SP irect rive entrifugal ceiling and inline fans are designed for clean air applications where low sound levels are desired. Quick elivery / Quick uild Performance SP eiling capacities range from 50 to 1,600 cfm and 1 in. wg of static pressure. SP Wall capacities range from 50 to 0 cfm and in. wg of static pressure. SP Inline capacities range from 70 to,00 cfm and 1 in. wg of static pressure. SP SP SP Standard onstruction eiling Wall Inline SP-L Housing - galvanized steel Housing - low profile Housing - insulated Wheel - forward-curved ccess panel lectrical disconnect lectrical knockouts lectrical junction box Mounting brackets ackdraft damper langes - inlet and outlet esigner grille - up through size 90 luminum grille - sizes 410 and larger SP SP SP Options and ccessories Stock eiling Wall Inline SP-L ischarge accessory - transitions vailable as standard on select sizes ischarge accessories - roof, wall lectrical accessories - speed control, motion detector, time delay Transformer Switches - 1 or 2 function Minimum ventilation controller irestat ehumidistat Isolators - hanging - decorative, stainless steel, aluminum Lighted grille - SP-, sizes 50 thru 90 SP-, sizes 50 thru ulbs - compact fluorescent or L - Lens - frosted, prismatic ilters eiling radiation damper ontractor 4 Packs - housing and motor packs separate Motor: 50 or 60 Hz (select sizes) 115 or 277 volt (select sizes) Products that earn the NRY STR prevent greenhouse gas emissions by meeting strict energy efficiency guidelines set by the U.S. nvironmental Protection gency and the U.S. epartment of nergy. ans that are NRY STR qualified include: SP-70, 0 and 90 SP-70, 90, 110, 125, 190, 200, 250 SP-L50 and 0 Select sizes and models with the Vari-reen motor are available. or comprehensive product information, including performance, access the product catalog found on or contact your local reenheck representative.

2 SP- SP- SP /16 in. SP, SP-L, SP 1/2 in. SP-110 thru 510, 510-V SP-710, 710-V & 70 SP-700, SP-900 thru 1550 SP-L 50 & 0 / imensions for SP Size Outlet Size* SP x 9 SP-50, SP-70, SP-0, SP-90, SP-110, SP-150, SP x SP-50, SP-70, SP x SP-110, SP-125, SP x SP-200, SP-250, SP-290, SP x SP-410, SP-510, SP-510-V x 16 SP x 1 SP-710, SP-710-V, SP x 16 SP-900, SP-1050, SP-1410, SP x 16 SP-L50, SP-L x ll dimensions are in inches. * dimensions are for the designer grille except on model SP-50 where the dimensions are shown for the decorative grille. 2 SP SP-110 thru 510 SP-510-V SP-700 thru 600 SP-710-V Inlet x (diameter) imensions for SP Size Inlet SP-110, SP-150, SP SP-110, SP-125, SP SP-200, SP-250, SP-290, SP SP-410, SP-510, SP-510-V SP SP-710, SP-710-V, SP SP-900, SP-1050, SP-1410, SP SP-1750, SP SP ll dimensions are in inches.

3 ischarge ccessories for SP, SP-L and SP 24 ischarge ccessories for SP and SP RJ-4 and RJ-6x9 RJ Pitched Roof ap Steel with black enamel finish Integral flashing flange uilt-in birdscreen and damper RJ-4 or use with SP-, SP-, SP- SP-L, SP/SP--V SP-, SP- Size 50, Size 50-0 RJ-10x10 Throat in. dia. RJ-6 x 9 Size Size x 9 RJ-10 x 10 Size x 10 ll dimensions are in inches. ½ (9) 27 (7) 6½ (165) 10 (254) 5 1 (42) (6) 5 (10) ll dimensions are in inches (millimeters). 11½ (292) L-10x lbow ischarge with 9 (2) esigned for installation under roof eaves Painted steel louvered grille uilt-in damper or SP-/SP-/SP-, sizes or SP-L, sizes 50, 0 or SP-/SP-, sizes W Round onnection Hooded Wall ap luminum - aluminum finish or outside wall applications uilt-in birdscreen (not available on W-4) and damper or use with SP-, SP-, SP- SP-L, SP/SP--V SP-, SP- WL Wall Louvered ischarge W-4 Size W-6 Size Size W- Size ll dimensions are in inches. nodized aluminum grille uilt-in damper Not recommended for exterior applications exposed to severe weather conditions. n external wall louver is recommended for such applications. WL-10 x or use with SP-, SP-, SP- SP-L, SP/SP--V SP-, SP- Size 50 Size Size WL-1 x 6 Size ll dimensions are in inches. W Square/Rectangular onnections Hooded Wall ap Steel with black enamel finish or outside wall applications uilt-in birdscreen and damper W-10 x V rick Vent esigned for installation in masonry walls nodized aluminum uilt-in aluminum mesh insect screen V0 or use with SP-, SP-, SP- SP-L, SP/SP--V SP-, SP- Size 50 Size Size or use with SP-, SP-, SP- SP-L, SP/SP--V SP-, SP- Size 50 Size Size W- x Size W-1 x Size ll dimensions are in inches V12 Size V157 Size ll dimensions are in inches.

4 ischarge ccessories for SP and SP R-7 Weathertight aluminum uilt-in curb cap Requires roof curb R-7 ia. urb ap or use with SP-, SP-, SP- SP-L, SP/SP--V SP-, SP- Size 50 Size Size RS ll aluminum exterior alvanized steel internal supports uilt-in curb cap Requires roof curb ia RS-10 Size RS-12 Size RS-16 Size RS-20 Size ll dimensions are in inches. 1½ in. ia. 1¾ in. R-7 Weathertight aluminum uilt-in flashing flange R-7 ia. lashing lange or use with SP-, SP-, SP- SP-L, SP/SP--V SP-, SP- Size 50 Size Size RS ll aluminum exterior alvanized steel internal supports uilt-in flashing flange ia RS-10 Size RS-12 Size RS-16 Size RS-20 Size ll dimensions are in inches. ia. 25 ischarge ccessories for SP, SP-L and SP R Round uct onnector Replaces the standard square discharge duct connector and damper. Uses existing mounting holes alvanized steel R-6 includes a damper R- does not include a damper or use with SP-, SP- SP/SP--V ia. R-6 Size R-6 R- ccessory Pressure rops The chart below can be used with all of the discharge accessories shown on these two pages. Specific pressure drop values for these accessories must be included in total system calculations for proper fan selection WL-1x6 R- Size RJ-10x10 ll dimensions are in inches. Transition uct Reducer urable plastic x4 Reducer x Reducer or use with SP-, SP-, SP-L SP-, SP- Size Size Size * Size L (100) 6 2 (157) 2 (114) M x Pressure rop in Inches of Water auge bove accessories tested with 4 feet of inlet duct V-157 W-1x V-12 W-x W- W-10x W-6 RJ-6x9 L-10x WL-10x V-0 R-7 R-7 ll dimensions are in inches. Used in conjunction with R-6

5 Isolators, eiling Radiation ampers, ilters, s 26 Hanging Vibration Isolators Vibration isolator kits are available for suspended installations. Kits include all hardware necessary to mount one unit, with the exception of 1/4-20 threaded rod to be supplied by others. an mounting brackets include prepunched mounting holes for ease of installation. eiling Radiation ampers ilters SP esigner ilter Stainless Steel or luminum Size , 510-V, 710, 710-V & , , ll dimensions are in inches. The reenheck SP- and SP- ceiling radiation dampers are UL/cUL lassified, rated at three to four hours fire resistance, and are available on all SP- and SP- fans and fan/light combinations. This design saves space by allowing the dampers to be mounted directly beneath the fan. ilter rea (ft 2 ) SP , SP SP , 510-V, 710, Not V - 70 vailable SP Mesh ilter SP Resistance in w.c /4-20 hanging support rod by others SP R Length Width Height , 510-V 710, 710-V & ll dimensions are in inches. ans used in most applications, even where air is not excessively dirty, will collect airborne dirt on wheels and motors over time. ccumulations of dirt on the fan wheel will sharply reduce performance and cause imbalance. irt buildup on the motor can cause it to overheat. ll of these conditions will shorten the life of the fan. To help reduce this accumulation, washable aluminum mesh filters are available to ilter Loss hart trap dirt before it enters the fan. These filters should be regularly cleaned to.24 maintain performance. The ilter Loss hart shows the effect the filter will.22 have on performance. To determine the added resistance, divide the desired.20 cfm by the filter area (ft 2 ). This will give PM. Use this with the filter loss chart.1 to determine the added resistance..16 In addition to reducing dirt accumulations on the motor and wheel, filters also.14 reduce sound levels Velocity PM x 100 s for SP esigner Standard on , White polystyrene finish. With or without motion detector with time delay. ecorative Optional on , White plastic finish, with or without light, motion detector with time delay. Lighted grille optional with prismatic or frosted lens. Stainless Steel Optional on , Polished stainless steel finish. luminum Standard on , 510-V, 710-V Optional on , White enamel finish.