Preparation Units for Compressed Air. Modular construction Compact design Simple mounting Corrosion-resistant casings 1032 AL

Transcription

1 L Preparation Units for ompressed ir Modular construction ompact design Simple mounting orrosion-resistant casings Maintenance devices for compressed air are put together according to need from the individual devices ilter water discarder Membrane pressure control valve Mist lubricator Manometer. Notes Various model ranges are on offer, depending on the conductor connector. Therefore the shape of the illustration in photo and drawing is somewhat different. The securing bracket is laid out differently, depending on the conductor connection (see securing bracket). Technical data ody material 3/4 and 1 luids luid temperature plastic Metal casing as standard compressed air bar (other temperature ranges on request) mbient temperature max. input pressure bar / bar max. output pressure bar Range of adjustment bar Installation by means of screw thread connection without fittings Pressure data [bar]: Overpressure with respect to atmospheric pressure Page 1/8

2 L Technical data - ontinuation max. oil charge [cm³] max. input pressure [bar] 2) max. output pressure [bar] 2) [l/min] 1/ / / / / /4 1) ) ) as standard with metal casing 2) Pressure data [bar]: Overpressure with respect to atmospheric pressure economic flow imensions Three-part maintenance unit, fully mounted* * consisting of filter water discarder, membrane pressure control valve, mist lubricator, manometer, securing bracket and manual condensation emptying ** * Port connection 1/ M 30 x / M 30 x / / / / Page 2/8

3 L imensions Two-part maintenance unit, fully mounted 1) and filter controller without manometer Two-part maintenance unit ** * ilter controller ** 1) Maintenance unit consists of filter controller, mist lubricator, manometer, securing bracket and manual condensation emptying * Locking screw is supplied unmounted ** ilateral manometer connection 1/ M 30 x / M 30 x / / / / ilter water discarder, pressure control valve and mist lubricator (all models without manometer) ilter water discarder 1/ / /4* /8* /2* / * max. input pressure 16 bar Page 3/8

4 L imensions Pressure control valve 1/ M 30 x 1.5 1/ M 30 x 1.5 1/ / / / Mist lubricator 1/ / / / / / * Oil adjustment screw Ordering charts Maintenance devices for compressed air Three-part maintenance unit max. input pressure [bar] QNn at 6 bar and 25 m/s [l/min] Item no. Three-part maintenance 1/ unit 1/ / / / / Page 4/8

5 L Ordering charts Maintenance devices for compressed air Two-part maintenance unit and filter controller without manometer max. input pressure [bar] QNn at 6 bar and 25 m/s [l/min] Item no. Two-part maintenance unit 1/ / / / / / ilter controller without 1/ manometer 1/ / / / / ilter water discarder, pressure control valve and mit lubricator QNn at 6 bar and 25 m/s [l/min] Item no. ilter water discarder 1/ without manometer 1/ / / / / Pressure control valve 1/ without manometer 1/ / / / / Mist lubricator without 1/ manometer 1/ / / / / Page 5/8

6 L ccessories - imensions Securing bracket 1/8, 1/4 and 1/2 (0-10 bar) Securing bracket 1/4... 3/8 (0-16 bar) H I H * rilling diagram for securing bracket 3/ itting dimension I H Input pressure [bar] H I 1/ max. 3 1/ max. 3 1/ max. 3 1/ / H I 3/4 and 1 for 3-part maintenance devices for 2-part maintenance devices for 1-part maintenance device Page 6/8

7 L Ordering charts accessories Manometer, 0-10 bar onnection size for maintenance unit Order no. 40 mm, 1/8 1/8-3/ mm, 1/8 1/ mm, 1/8 1/ oupling set onnection size for maintenance unit Order no. 2 screws with nuts 1/8-1/ and O ring* 1/4-3/ / / * 2 coupling sets are needed for three-part maintenance units Miscellaneous accessories ccessories onnection size for maintenance unit Order no. ranch pipe set or connecting a second load or behind 1/8-1/ incl. coupling set the lubricator 1/4-3/ / / Securing set 1 securing bracket and 2 screws 1/8-1/ /4-3/ / securing brackets and 4 screws 3/ Spring for semi- 1/8 and 1/ automatic 1/ / ischarge automaton 1/2, 3/4 and Replacement filter all devices 0-10 bar 1/8-1/ µm all devices 0-16 bar 1/4-3/ all devices 1/ only for two-part maintenance device 3/ only for one and two-part maintenance device 3/ Shut-off ball valve 1/ / / Page 7/8

8 L Ordering charts accessories Miscellaneous accessories ccessory Spare container for filters and filter controllers onnection size Spare container Order no. Spare container for , , , /8-1/ filters and filter , , , /4-3/ controllers , / , , , / To find your nearest urkert facility, click on the orange box If case of special conditions, We reserve the right to make 0602/00_U-N_ please consult for advice. technical changes without notice. Page 8/8