fineline Service Manual ir2020/2016 Series

Transcription

1 Service Manual ir2020/2016 Series Jan

2 Chapter 1 Introduction 1.1 System Construction Pickup/ Delivery /Original Handling Accessories System Configuration (ir2020/ir2020j) Pickup/ Delivery /Original Handling Accessories System Configuration (ir2016/ir2016j) Pickup/ Delivery /Original Handling Accessories System Configuration (ir2020i) Pickup/ Delivery /Original Handling Accessories System Configuration (ir2016i) Reader Heater/ Cassette Heater System Configuration (ir2020/ir2020j/ir2016/ir2016j) Reader Heater/ Cassette Heater System Configuration (ir2020i) Reader Heater/ Cassette Heater System Configuration (ir2016i) Printing/Transmitting Accessories System Configuration (ir2020j/ir2016j) Printing/Transmitting Accessories System Configuration (ir2020/ir2016) Printing/Transmitting Accessories System Configuration (ir2020i/ir2016i) Functions of the Printing/Transmission Functions (ir2020/ir2016) Functions of the Printing/Transmission Functions (ir2020i/ir2016i) Product Specifications Names of Parts External View (ir2020/ir2020j) External View (ir2020i) External View (ir2016/ir2016j) External View (ir2016i) Cross-Section Using the Machine Turning On the Power Switch (ir2020/ir2020j/ir2016/ir2016j) Turning On the Power Switch (ir2020i/ir2016i) When Turning Off the Main Power Switch (ir2020/ir2020j/ir2016/ir2016j) When Turning Off the Main Power Switch (ir2020i/ir2016i) Control Panel (ir2020/ir2020j/ir2016/ir2016j) Control Panel (ir2020i/ir2016i) User Mode Items Common Settings (ir2020/ir2020j/ir2016/ir2016j) Common Settings (ir2020i/ir2016i) Copy Settings (ir2020/ir2020j/ir2016/ir2016j) Timer Settings (ir2020i/ir2016i) FAX Settings (ir2020/ir2020j/ir2016/ir2016j) Adjustment/Cleaning (ir2020i/ir2016i) Address Book Set. (ir2020/ir2020j/ir2016/ir2016j) Report Settings (ir2020i/ir2016i) Printer Settings (ir2020/ir2020j/ir2016/ir2016j) System Settings (ir2020i/ir2016i) Timer Settings (ir2020/ir2020j/ir2016/ir2016j) Copy Settings (ir2020i/ir2016i) Report Settings (ir2020/ir2020j/ir2016/ir2016j) Communication Settings (ir2020i/ir2016i) Adjust./Cleaning (ir2020/ir2020j/ir2016/ir2016j) Printer Settings (ir2020i/ir2016i) System Settings (ir2020/ir2020j/ir2016/ir2016j) Address Book Settings (ir2020i/ir2016i) Recommended setting of system management information The Reference Information of the Department ID Management Maintenance by the User User Maintenance Items Cleaning (ir2020/ir2020j/ir2016/ir2016j) Cleaning (ir2020i/ir2016i) Safety

3 Safety of the Laser Light CDRH Regulations Handling the Laser Unit (ir2020/ir2020j/ir2016/ir2016j) Handling the Laser Unit (ir2020i/ir2016i) Safety of Toner Point to Note about Fire Cautions as to the replacement and disposal of lithium battery Product Specifications Product Specifications Function List Printing Speed (ir2020/ir2020j) Printing Speed (ir2020i) Printing Speed (ir2016/ir2016j) Printing Speed (ir2016i) Types of Paper Chapter 2 Installation 2.1 Making Pre-Checks Selecting the Site of Installation Before Starting the Work (230V EUR) Before Starting the Work (230V EUR) Unpacking and Installation Unpacking and Removing the Packaging Materials Unpacking and Removing the Packaging Materials Installing the Drum Unit Installing the Toner Bottle Installing the Toner Bottle Setting the Cassettes Attaching the Ferrite Core Attaching the Ferrite Core Checking the Image Quality Setting the Country/Region Setting the Country/Region Setting the Date and Time Setting the Date and Time Attaching Other Parts Checking the Connection to the Network Checking the Network Connection Checking the Network Connection Flow of Accessory Installation Flow of Accessary Installation Flow of Accessary Installation Flow of Accessary Installation Installing the Card Reader Points to Note Checking the Installation Procedure Registering the Card IDs Registering the Card IDs Installing the Heater PCB Preparing the parts Preparing the Host Machine Installing the Heater PCB Installing the Reader Heater Preparing the parts Installing the Reader Heater Harness

4 2.7.3 Removing Reader Components Removing Parts at the Left of the Reader Installing the Reader Heater Installing the Cassette Heater Preparing the parts Preparing the Host Machine Installing the Cassette Heater Installing the Control Card Cable Preparing the parts Installing the Control Card Cable Chapter 3 Main Controller 3.1 Construction Construction and Mechanisms Construction and Mechanisms Construction of the Electrical Circuitry Image Processor PCB Image Processing Overview of the Image Flow Construction of the Image Processing Module Reader Unit Input Image Processing Compressio/ Extesion/ Editing Block Compressio/ Extesion/ Editing Block Printer unit Output Image Processing Flow of Image Data Flow of Image Data According to Copy Functions Flow of Image Data for the SEND Function Flow of Image Data for the Fax Transmission Flow of Image Data for the Fax Reception Function Flow of Image Data for the PDL Function Parts Replacement Procedure Main Controller PCB Removing the Rear Cover Removing the Left Cover (Rear) Removing the RAM Cover Removing the SDRAM Removing the LAN Cover Removing the IP Cover Removing the IP Cover Removing the image processor PCB Procedure after Replacing the Image Processor PCB (ir2020/ir2020j/ir2016/ir2016j) Procedure after Replacing the Image Processor PCB (ir2020i/ir2016i) SDRAM Removing the Rear Cover Removing the RAM Cover Removing the SDRAM Chapter 4 Original Exposure System 4.1 Construction Specifications, Control Methods, and Functions (ir2020/ir2020j/ir2020i) Specifications, Control Methods, and Functions (ir2016/ir2016j/ir2016i) Major Components (ir2020/ir2020j/ir2020i) Major Components (ir2016/ir2016j/ir2016i) Control System Configuration (ir2020/ir2020j/ir2020i) Control System Configuration (ir2016/ir2016j/ir2016i)...4-3

5 4.1.7 Reader Controller PCB (ir2020/ir2020j/ir2020i) Reader Controller PCB (ir2016/ir2016j/ir2016i) Basic Sequence Basic Sequence at Power-on Basic Sequence after Depression of Start Key (Book mode, One Sheet of original) Basic Sequence after Depression of Start Key (ADF Mode, One Sheet of Original) Various Control Controlling the Scanner Drive System Outline Reader Motor Control Contact Image Sensor (CIS) Outline Analog Control Performed by the CIS (ir2020/ir2020j/ir2016/ir2016j) Analog Control Performed by the CIS (ir2020i/ir2016i) Enlargement/Reduction Magnification Change in Vertical Scan Direction Magnification Change in Horizontal Scan Direction Detecting the Size of Originals Outline Outline of Original Size Detection Dirt Sensor Control Outline Image Processing Outline CMOS Sensor Drive CMOS Sensor Output Gain Correction and Offset Correction CMOS Sensor Output A/D Conversion Shading Correction (Outline) Shading Adjustment Shading Correction Parts Replacement Procedure Copyboard glass Removing the Copyboard glass Procedure after Replacing the Copyboard Glass (ir2020i/ir2016i) Removing the ADF Reading Glass Reader Controller PCB Removing the Rear Cover Removing the Right Cover (Lower) Removing the Right Cover (Upper) Removing the Left Cover (Rear) Removing the Reader Rear Cover Removing the Copyboard glass Removing the Reader Controller PCB Scanner Motor Removing the Rear Cover Removing the Right Cover (Lower) Removing the Right Cover (Upper) Removing the Left Cover (Rear) Removing the Reader Rear Cover Removing the Scanner Motor Contact sensor Removing the Rear Cover Removing the Right Cover (Lower) Removing the Right Cover (Upper) Removing the Left Cover (Rear) Removing the Reader Rear Cover Removing the Copyboard glass Removing the Contact Image Sensor (CIS) Procedure after Replacing the CIS (ir2020/ir2020j/ir2016/ir2016j) Procedure after Replacing the CIS (ir2020i/ir2016i)

6 4.4.5 Copyboard Cover Open/Close Sensor Removing the Rear Cover Removing the Right Cover (Lower) Removing the Right Cover (Upper) Removing the Left Cover (Rear) Removing the Reader Rear Cover Removing the Copyboard Cover Open/Close Sensor (Front/Rear) Contact Sensor HP Sensor Removing the Copyboard glass Removing the ADF Reading Glass Removing the Contact Sensor HP Sensor Original Size Sensor Removing the Copyboard glass (ir2020/ir2020j/ir2020i) Removing the Original Sensor (Vertical Scan Direction) (ir2020/ir2020j/ir2020i) Removing the Original Sensor (Horizontal Scan Direction) (ir2020/ir2020j/ir2020i) Reader Heater (option) Removing the Copyboard glass Removing the Reader Heater (Right) Removing the Reader Front Cover Removing the ADF Reading Glass Removing the Reader Heater (Left) Chapter 5 Laser Exposure 5.1 Construction Overview Specifications and Control Mechanism Specifications and Control Mechanism Main Components Control System Configuration Various Controls Controlling the Laser Activation Timing Laser Emission ON/OFF Control Laser Emission ON/OFF Control Horizontal Synchronization Control Horizontal Synchronization Control Controlling the Intensity of Laser Light Automatic Photocurrent Control (APC) Controlling the Laser Scanner Motor Laser Scanner Motor Control Controlling the Laser Shutter Laser Shutter Control Parts Replacement Procedure Laser Scanner Unit Removing the Rear Cover Removing the Right Cover (Lower) Removing the Delivery Tray Removing the Laser Scanner Unit Chapter 6 Image Formation 6.1 Construction Specifications of Image Formation System Major Components of Image Formation System Image Formation Process Image Formation Process Basic Sequence Basic Sequence of Operation

7 6.4 Driving and Controlling the High-Voltage System Outline Drum Unit Outline of the Drum Unit Outline Charging Mechanism Primary Charging Bias Control Developing Unit Outline Developing Bias Control Toner Container Outline Transfer Unit Outline of the Transfer Unit Outline Controlling the Transfer Bias Transfer Roller Bias Control Separation Mechanism Static Eliminator Bias Control Photosensitive Drum Cleaning Outline Waste Toner Full Detection Parts Replacement Procedure Drum Unit Removing the Drum Unit Developing Assembly Removing the Drum Unit Removing the Rear Cover Removing the Right Cover (Lower) Removing the Delivery Tray Removing the Developing Assembly Precautions about Installation of Developing Assembly Procedure after Replacing the Developing Assembly Transfer Charging Roller Removing the Transfer Charging Roller Chapter 7 Pickup/Feeding System 7.1 Construction Specifications/Configuration/Operation Methods Locations of Main Units Roller Layout Drawing Paper Path Drawing(Printer on its own) Paper Path Drawing(Finisher-U1) Paper Path Drawing(Duplex Unit-A1/Finisher-U1) Paper Path Drawing(Duplex-A1) Paper Path Drawing(Duplex-A1/Inner 2Way Tray-E1) Paper Path Drawing(Inner 2Way Tray-E1) Sensor Layout Drawing Detecting Jams Delay Jams Delay Jam in Pickup Assembly Delay Jam in Delivery Assembly (Paper Leading Edge Jam at First Delivery Sensor/Wound Paper Jam at Fixing Assembly) Stationary Jams Stationary Jam in Pickup Assembly Stationary Jam in Delivery Assembly (Paper Trailing Edge Stationary Jam at First Delivery Sensor/Stationary Jam at First

8 Delivery Sensor) Other Jams Door Open Jam Cassette Pick-Up Unit Overview Cassette Pickup Operation Cassette Paper Size Detection Manual Feed Pickup Unit Overview Post-pickup Control after Multi Manual Feed Pickup Parts Replacement Procedure Pickup Roller Removing the Cassette Paper Pickup Roller Cassette Pickup Assembly Removing the Lower-left Cover Removing the Cassette Pickup Assembly Cassette Size Sensor Removing the Paper Size Detection Switches Cassette Retry Paper Sensor Removing the Lower-left Cover Removing the Cassette Pickup Assembly Removing the Retry Sensor Cassette Paper Sensor Removing the Lower-left Cover Removing the Cassette Pickup Assembly Removing the Cassette Paper Presence/Absence Sensor Cassette Pickup Solenoid Removing the Lower-left Cover Removing the Cassette Pickup Assembly Removing the Cassette Pickup Solenoid Manual Pickup Roller Removing the Drum Unit Removing the Transfer Registration Unit Removing the Feed Guide Removing the Multifeeder Pickup Roller Manual Feed Tray paper sensor Removing the Drum Unit Removing the Transfer Registration Unit Removing the Feed Guide Removing the Multifeeder Paper Presence/Absence Sensor Manual Feed Pickup Solenoid Removing the Drum Unit Removing the Transfer Registration Unit Removing the Feed Guide Removing the Multifeeder Connector Cover Removing the Multifeeder Unit Removing the Multifeeder Pickup Solenoid Registration Roller Removing the Drum Unit Removing the Registration Roller Registration Clutch Removing the Rear Cover Removing the Registration Clutch Separation Roller Removing the Feed and Separation Rollers Separation Pad Removing the Drum Unit Removing the Transfer Registration Unit Removing the Feed Guide

9 Removing the Multifeeder Pickup Roller Removing the Separation Pad Chapter 8 Fixing System 8.1 Construction Specifications, Control Mechanisms, and Functions Major Components Various Control Mechanisms Controlling the Speed of the Fixing Film Controlling the Fixing Film Speed Controlling the Fixing Film Temperature Outline Controlling the Fixing Film Temperature Target Temperatures by Mode Detecting the Passage of Paper Detecting the Passage of Paper Protective Functions Protective Functions Parts Replacement Procedure Fixing Unit Removing the Drum Unit Removing the rear cover Removing the Left Cover (Rear) Removing the Left Door Removing the Fixing Unit Pressure Roller Removing the Drum Unit Removing the rear cover Removing the Left Cover (Rear) Removing the Left Door Removing the Fixing Unit Removing the Fixing Film Unit Removing the Pressure Roller Fixing Film Removing the Drum Unit Removing the rear cover Removing the Left Cover (Rear) Removing the Left Door Removing the Fixing Unit Removing the Fixing Film Unit Fixing Delivery Sensor Removing the Drum Unit Removing the Rear Cover Removing the Left Cover (Rear) Removing the Left Door Removing the Fixing Unit Removing the Fixing Delivery Sensor Fixing Film Sensor Removing the Drum Unit Removing the Rear Cover Removing the Left Cover (Rear) Removing the Left Door Removing the Fixing Unit Removing the Fixing Film Sensor Chapter 9 External and Controls 9.1 Control Panel

10 9.1.1 Overview (ir2020/ir2020j/ir2016/ir2016j) Overview (ir2020i/ir2016i) Fans Overview (ir2020/ir2020j/ir2016/ir2016j) Overview (ir2020i/ir2016i) Fan Control Power Supply System Power Supply Outline (ir2020/ir2020j/ir2016/ir2016j) Outline (ir2020i/ir2016i) Rated Output of the Power Supply PCB Protection Function Protective Mechanisms Parts Replacement Procedure Main Drive Assembly Removing the Drum Unit Removing the Rear Cover Removing the Left Cover (Rear) Removing the Main Motor Removing the Registration Clutch Removing the Main Drive Unit Fixing Drive Assembly Removing the Drum Unit Removing the Rear Cover Removing the Left Cover (Rear) Removing the Left Door Removing the Fixing Unit Removing the SDRAM Removing the SDRAM Removing the LAN Cover Removing the IP Cover Removing the IP Cover Removing the Image Processor PCB Mount Removing the Fixing Drive Unit Power Supply Unit Removing the Rear Cover Removing the Right Cover (Lower) Removing the Delivery Tray Removing the Main Power Supply PCB Control Panel Removing the Reader Front Cover Removing the Operation Panel Unit (ir2020/ir2020j/ir2016/ir2016j) Removing the Operation Panel Unit (ir2020i/ir2016i) DC Controller PCB Removing the Rear Cover Removing the DC Controller PCB Option Power Supply PCB Removing the Rear Cover Removing the Right Cover (Lower) Removing the Delivery Tray Removing the Option Power Supply PCB HVT PCB Removing the Rear Cover Removing the Right Cover (Lower) Removing the Delivery Tray Removing the Main Power Supply PCB Removing the HVT PCB Fixing Heat Discharge Fan Removing the Fixing Heat Discharge Fan

11 9.4.9 Fan Filter Removing the Fan Filter Motor of Main Drive Assembly Removing the Rear Cover Removing the Main Motor Fixing Driver Motor Removing the Rear Cover Removing the Left Cover (Rear) Removing the RAM Cover Removing the SDRAM Removing the LAN Cover Removing the IP Cover Removing the IP Cover Removing the Image Processor PCB Mount Removing the Fixing Unit Drive Motor Left Door Removing the Drum Unit Removing the Rear Cover Removing the Left Cover (Rear) Removing the Left Door Chapter 10 Maintenance and Inspection 10.1 Periodically Replaced Parts Overview Reader Unit Printer Unit Durables and Consumables Overview Reader Unit Printer Unit Scheduled Servicing Basic Procedure Scheduled Servicing Chapter 11 Standards and Adjustments 11.1 Scanning System Procedure after Replacing the CIS (ir2020/ir2020j/ir2016/ir2016j) Procedure after Replacing the CIS (ir2020i/ir2016i) Procedure after Replacing the Copyboard Glass (ir2020i/ir2016i) Image Formation System Procedure after Replacing the Developing Assembly Electrical Components Procedure after Replacing the Image Processor PCB (ir2020/ir2020j/ir2016/ir2016j) Procedure after Replacing the Image Processor PCB (ir2020i/ir2016i) Procedure after Replacing the USB Memory (ir2020i/ir2016i) Actions to Take before All Clearing (Backing up the User Data) Chapter 12 Correcting Faulty Images 12.1 Making lnitial Checks Site Environment Checking the Paper Checking the Placement of Paper Checking the Durables Checking the Units and Functional Systems Others

12 12.2 Outline of Electrical Components Clutch/Solenoid List of Clutches/Solenoids Motor List of Motors Fan List of Fans Sensor List of Sensors Switch List of Switches Lamps, Heaters, and Others List of Lamps, Heaters, and Others PCBs List of PCBs Chapter 13 Self Diagnosis 13.1 Error Code Table List of Error Codes Error Code Details Error Code Details Jam Code Jam Codes (Related to Printer Unit) Jam Codes (Related to Finisher) Jam Codes (Related to ADF) Jam Codes (Related to Duplex Unit) Jam Codes (Related to Inner 2-way Tray) Finisher Error Codes Error Code Details FAX Error Codes Outline Error Code Outline User Error Code User Error Code Service Error Code Service Error Code Chapter 14 Service Mode 14.1 Outline Outline of Service Mode (ir2020/ir2020j/ir2016/ir2016j) Outline of Service Mode (ir2020i/ir2016i) Using the Mode (ir2020/ir2020j/ir2016/ir2016j) Using the Mode (ir2020i/ir2016i) Default settings Service Mode Menus Setting of Bit Switch (SSSW) Outline Bit Switch Composition SSSW-SW List of Functions Detailed Discussions of Bit SSSW-SW List of Functions Detailed Discussions of Bit SSSW-SW

13 List of Functions Detailed Discussions of Bit Detailed Discussions of Bit Detailed Discussions of Bit Detailed Discussions of Bit Detailed Discussions of Bit SSSW-SW List of Functions Detailed Discussions of Bit Detailed Discussions of Bit SSSW-SW List of Functions SSSW-SW List of Functions Detailed Discussions of Bit SSSW-SW List of Functions Detailed Discussions of Bit Detailed Discussions of Bit SSSW-SW List of Functions Detailed Discussions of Bit Detailed Discussions of Bit Detailed Discussions of Bit Detailed Discussions of Bit Detailed Discussions of Bit Detailed Discussions of Bit SSSW-SW List of Functions Detailed Discussions of Bit SSSW-SW List of Functions Detailed Discussions of Bit Detailed Discussions of Bit Detailed Discussions of Bit Detailed Discussions of Bit SSSW-SW List of Functions Detailed Discussions of Bit Detailed Discussions of Bit Setting of Menu Switch (Menu) Menu Switch Composition <No.005 NL equalizer> <No.006 telephone line monitor> <No.007 ATT transmission level> <No.008 V.34 modulation speed upper limit> <No.009 V.34 data speed upper limit> <No.010 Frequency of the pseudo CI signal> Setting of Numeric Parameter (NUMERIC Param.) Numerical Parameter Composition <002: RTN transmission condition (1)><003: RTN transmission condition (2)><004: RTN transmission condition (3)> <005: NCC pause length (pre-id code)> <006: NCC pause length (post-id code)> <010: line connection identification length> <011: T.30 T1 timer (for reception)> <013: T.30 EOL timer> <016: time length to first response at time of fax/tel switchover> <017: pseudo RBT signal pattern ON time length><018: pseudo RBT signal pattern OFF time length (short)><019:

14 pseudo RBT signal pattern OFF time length (long)> <020: pseudo CI signal pattern ON time length><021: pseudo CI signal pattern OFF time length (short)><022: pseudo CI signal pattern OFF time length (long)> <023: CNG detention level for fax/tel switchover> <024: pseudo RBT transmission level at time of fax/tel switchover> <025: Answering machine connection function signal detection time> <027: V.21 low-speed flag preamble identification length> < : Count type select > Setting of Scanner Functions (SCANNER) Setting of Bit Switch Numeric Parameter Functional configuration <024:CIS scan position during ADF scanning> <026:Distance from the standby position of CIS to the shading start point> <031Vertical scan start position adjustment> <032Horizontal scan start position adjustment> <033Vertical scan magnification correction> <035: - 036:Reader motor speed change> <041: Vertical scan start position adjustment (when scanning on a document fed from ADF)> <042: Horizontal scan start position adjustment (when scanning on a document fed from ADF)> <043: Horizontal scan end position correction ((copy:scanning on ADF)> <044: Horizontal scan end position correction (superfine:scanning on ADF)> <045: Horizontal scan end position correction (fine:scanning on ADF)> <046: Horizontal scan end position correction (standard:scanning on ADF)> <047: Vertical scan magnification correction (when scanning on a document fed from ADF)> <048: Horizontal scan magnification correction (when scanning on a document fed from ADF)> <054: Pickup motor speed correction (when the ADF is used) > <193: ADF special standard-sized paper: LGL misidentification-ready> <194: ADF special standard-sized paper: LTR misidentification-ready> <195: ADF special standard-sized paper: LTR_R misidentification-ready> <196: Shading Target Value (Red)> <197: Shading Target Value (Green)> <198: Shading Target Value (Blue)> <213: XYZ correction value (X) of standard white plate> (ir2020i/ir2016i) <214: XYZ correction value (Y) of standard white plate> (ir2020i/ir2016i) <215: XYZ correction value (Z) of standard white plate> (ir2020i/ir2016i) Setting of Printer Functions (PRINTER) Service Soft Switch Settings (PRINTER) SSSW-SW SSSW-SW SSSW-SW Numerin Parameter Settings (Numeric Prama.) List of Functions <031: Top registration adjustment (manual feed tray)> <032: Top registration adjustment (cassette)> <033: Top registration adjustment (duplex unit)> <034: Left-end registration adjustment (manual feed tray)> <035: Left-end registration adjustment (cassette 1)> <036: Left-end registration adjustment (cassette 2)> <037: Left-end registration adjustment (cassette 3)> <038: Left-end registration adjustment (cassette 4)> <039: Left-end registration adjustment (duplex unit)> <040: Target fixing temperature adjustment (manual feed tray)> <041: Target fixing temperature adjustment (cassette 1)> <042: Target fixing temperature adjustment (cassette 2)> <043: Target fixing temperature adjustment (cassette 3)> <044: Target fixing temperature adjustment (cassette 4)> <045: Fixing film speed change (manual feed tray)> <046: Fixing film speed change (cassette)>

15 Setting of Cassette (CST) Special Standard-sized Paper Compatibility Setting of System Functions (SYSTEM) Bit Switch Settings Registration of Accessories (ACC) Accessory Registration Display of Counter Information (COUNTER) Counters Clearing Counters Service Report (REPORT) Report Output System Data List System Dump List Counter List Error Log List Spec List Service Label Download (DOWNLOAD) Download Initialization of Set Value (CLEAR) Clear Display of ROM Information (ROM) ROM display Test Mode (TEST) Outline Test Mode Menu List (ir2020/ir2020j/ir2016/ir2016j) Test Mode Menu List (ir2020i/ir2016i) D-RAM Test<(1) D-RAM TEST> Scan Test ((2) SCAN TEST) Print Test ((3) PRINT TEST) MODEM Test ((4) MODEM TEST) Function Test ((6) FUNCTION TEST) (ir2020/ir2020j) Function Test ((6) FUNCTION TEST) (ir2016/ir2016j) Function Test ((6) FUNCTION TEST) (ir2020i) Function Test ((6) FUNCTION TEST) (ir2016i) Roller cleaning mode ((0) ROLLER CLEAN) Chapter 15 Upgrading 15.1 Outline Overview of Upgrade Overview of Upgrade Overview of Service Support Tool Overview of Service Support Tool Making Preparations Registering the System Software Registering the System Software Connection Downloading System Software Downloading System Downloading Procedure Downloading Procedure Downloading RUI, and Language Downloading Procedure Downloading BOOT Downloading Procedure

16 Other Upgrade Methods Downloading the PCL Software Downloading the PCL Software Chapter 16 Service Tools 16.1 Service Tools Special Tools Oils and Solvents

17 imagerunner 2016/2020 PARTS CATALOG DU SEPT COPYRIGHT 2003 CANON INC. CANON imagerunner 2016/2020 REV. 0 PRINTED IN U.S.A.

18 imagerunner 2016/2020 NUMERICAL INDEX A ASSEMBLY LOCATION DIAGRAM ACCESSORIES EXTERNAL COVERS, PANELS, ETC MACHINE FRONT PLATE INTERNAL COMPONENTS INTERNAL COMPONENTS MACHINE REAR PLATE LFET DOOR ASSEMBLY PAPER FEEDER FRAME ASSEMBLY READER ASSEMBLY MAIN DRIVE ASSEMBLY FIXING DRIVE ASSEMBLY CASSETTE CASSETTE FEEDER ASSEMBLY PAPER PICK-UP ASSEMBLY CASSETTE FEEDER ASSEMBLY(iR2020) PAPER PICK-UP ASSEMBLY(iR2020) MULTI FEED TRAY ASSEMBLY PAPER DELIVERY ASSEMBLY DEVELOPING ASSEMBLY FIXING ASSEMBLY IMAGE PROCESSOR PCB ASSEMBLY HVT PCB ASSEMBLY Card Reader Attachment-C1/C2 NUMERICAL INDEX E10 CARD READER MOUNTING HARDWARE OPTION POWER SUPPLY NUMERICAL INDEX Z10 ACC POWER SUPPLY ASSEMBLY...2-1

19 Card Reader Attachment-C1/C2

20 E10 CARD READER MOUNTING HARDWARE...2-1

21 Option Power Supply

22 Z10 ACC POWER SUPPLY ASSEMBLY...2-1

23 Super G3 FAX Board-T1 PARTS CATALOG SEPT COPYRIGHT 2003 CANON INC. CANON Super G3 FAX Board T1 REV. 0 PRINTED IN U.S.A.

24 Super G3 FAX Board-T1 Fax Panel-A1 NUMERICAL INDEX XA ASSEMBLY LOCATION DIAGRAM X01 PACKING KIT X90 FAX BOARD PCB ASSEMBLY NUMERICAL INDEX X10 PANEL, FAX ASSEMBLY...2-1

25 PCL Printer Kit-J1 PARTS CATALOG SEPT COPYRIGHT 2003 CANON INC. CANON PCL Printer Kit J1 REV. 0 PRINTED IN U.S.A.

26 NUMERICAL INDEX PCL PRINTER KIT-J PCL PRINTER KIT-J1 G98 PCL KIT...2-1

27 UFRII Printe it PARTS CATALOG SEPT COPYRIGHT 2003 CANON INC. CANON UFRII LT Printer Kit REV. 0 PRINTED IN U.S.A.

28 NUMERICAL INDEX UFRII LT Printer Kit UFRII LT Printer Kit-J2 X90 LAN PCB ASSEMBLY...2-1