SightLogix Enterprise Security System Release Notes 15.4

Transcription

1 SightLogix Enterprise Security System Release Notes 15.4 Release 15.4 of SightLogix Security System software introduces support for the HD model of the SightSensor and provides new installation instructions. It also addresses any previously reported software bugs and enhancements, as discussed below. The SightSensor HD is a dual-stream smart camera that uses a thermal imager for reliable detection and an HD color imager for intruder verification. Like all SightSensors, calibration, video analytic rules and zones are all set using the thermal imager. Video is presented to the user as high definition color and as black and white thermal, with analytic overlays in both streams. The SightSensor Installation Guide has been updated to include SightSensor HD instructions. New firmware releases are included for three families of software (5.x, 10.x, and 15.x.) When updating an existing camera, choose the software family running on the device that matches the family of firmware you are installing. For example, if you are running 10.x on your existing SightSensor, you would choose the 10.x version of firmware. Unless noted, new features mentioned in the later section are available only for the 15.x firmware family. SightLogix Enterprise Security System This software release of the Enterprise Security System upgrades the Coordination System (CS) to version and the camera firmware to version for the 15.x firmware family, for 10.x firmware family and for previous generations. Updated documentation is also provided. PN: of 6 Dec 15, 2017

2 The SightMonitor client and Coordination System server is qualified for Windows 10 (32 and 64-bit), Windows 7 Professional (32 and 64-bit), Windows Server 2003/2008/2012 (32 and 64-bit). Current Video Management Systems Supported SightLogix SightSensors have been qualified with the following systems (SightSensor HD has been qualified with those noted, along with the VMS version): 360 Surveillance AMAG 6.2 American Dynamic Intellex IP Avigilon (HD v ) Bosch DiBos Bosch BVMS (HD v 7.5) Cisco Dedicated Micro DVTEL 5.3 DVTEL 6.0 Exacq Genetec 4.8, Omnicast 4.8 and Security Center 5.5 (HD) Geutebrück Honeywell DVM Honeywell Enterprise Honeywell NVR 2.0 Build 22 IndigoVision Control Center 12 (HD) Intergraph Lenel OnGuard 2010, 2012 NVR 7.2 Luxriot (HD 2.5.8), EVO March Network Command 1.5 & 1.6 March Network VideoSphere Milestone Enterprise (HD v10.0a) Milestone Corporate NICE 10 Nice 11 Release 10 ONSSI Netguard, EVDMS 8.6a Occularis 3.0 Panasonic Pelco Endura Proximex Sony RealShot Manager SWI System with Intelligence Inc. SureView IMMX CS CC Verint Nextiva (HD v6.4) Viconnet VideoNext Intellex IP SureView IMMX (HD) PN: of 6 Dec 15, 2017

3 New Features This release adds the following new functionality in the SightLogix Enterprise System. These features apply only to 15.x firmware, unless explicitly noted otherwise. ONVIF Interface reports IR and HD Color Video Sources for SightSensor HD With this release of 15.x firmware, the ONVIF interface of SightSensor HD devices describes two video sources and two profiles making both the IR and HD color video streams available through ONVIF. SightTracker Supports FLIR CP-6302 PTZ This release of firmware supports the FLIR CP-6302 PTZ device with SightTracker. This feature is also available in x series firmware. Devices Support Event Reporting by HTTPS This release of firmware supports event reporting (using Event Server URL) using HTTPS protocol. This allows use of devices such as Axis P8221 Network I/O Audio Module to relay alarm events using secure protocol. This feature is also available in x series firmware. Remote Management of Cameras This release adds the ability to the SightMonitor to override the default network port during the Add Camera process. This is helpful for situations where cameras are located on a remote network, behind a router, which is performing Network Address Translation. SightMonitor Add Camera will now add additional cameras which are connected via the same public IP address, where Camera Port (the camera management port) is mapped to another port number. SightSensor HD and Color Video Available as Live Streams SightSensor HD visible and thermal streams are available as MJPEG or MPEG. For MPEG : Visible: rtsp:// /mpeg1 Thermal: rtsp:// /mpeg2 For MJPEG : PN: of 6 Dec 15, 2017

4 Visible: Thermal: Metadata Reports Day or Night Mode State and Hybrid Imager Type This release of 15.x fixes a bug which prevented the state of the visible camera being correctly reported (day or night mode), in XML metadata. The Imager Type is now reported as Hybrid for SightSensor HD devices. Onvif Pullpoint Event Notifications This release addresses a number of issues with ONVIF PullPoint subscriptions. The device capabilities correctly report that Basic subscription support is not available. Subscription IDs are unique across reboots preventing problems with multiple clients. Subscription manager correctly handles subscription renewals (Automatic or Manual). Improved interoperability with 3rd party systems. This feature applies to 15.x and 10.x firmware. Camera Network Configuration Page Includes Reboot Button This release adds the ability to force a camera reboot from the Network web page. Increased field of View with Image Stabilization Starting with Release , a fix was made to correct a problem with Image Stabilization which overly cropped the image. NOTE: Camera s upgraded with version or newer which currently run an earlier version of firmware MUST have their calibration and zones adjusted to compensate for the wider field of view. This fix results in better image quality and more accurate assessment of target size and position etc. 15.x firmware Incorrectly Reported Model Number NS This release of 15.x firmware correctly reports model number NS for field of view 24.8 degrees with 640x480 thermal image. This change does not affect the operation of the device. A second reboot of the device (after loading this release) is required to update the model information displayed in the camera s web homepage. SightTracker used with Panasonic IP Dome A bug in handling Panasonic IP Domes has been fixed that could cause the SightTracker to reboot after many hours of operation. This could cause updates of the dome position to be missed if the reboot occurred while an associated PN: of 6 Dec 15, 2017

5 SightSensor was tracking an object. SightTrackers with firmware or should be updated to or newer. Upgrading to the New SightLogix Enterprise System If you have an existing SightLogix system, do the following to install the new software both the server (Coordination System) and client (SightMonitor) over an existing installation: > Backup current settings. This step is optional but recommended (current alarm policy and other information is not overwritten during an upgrade). See Chapter 5 of the System Manual for details. > Follow the upgrade steps as described in the SightLogix Support Portal: Known issues in SightLogix Enterprise system When using this release, please note the following: > Some user audio files uploaded to the camera do not play correctly. > After changing the framerate (mpeg tab of SightMonitor Configuration window), the length of the next clip delivered may have too short a length. Subsequent clips will have the correct length. > After installing SightMonitor client software, the server firewall must have the appropriate exception rule added before the client can connect. Add incoming tcp rule for specific port > Currently this release of SightLogix Coordination System requires that the user select the correct firmware image for the target hardware device. For cameras with 15.x firmware select version 15.x, for cameras with firmware 10.x select version 10.x; for cameras with previous generation firmware select version 5.x. > When adding a previously configured camera which has been assigned custom Administrator Access username / password, the user must add these credentials to the Site Configuration template before an Add Camera operation will succeed. If the username and password are unknown, the camera can be added after it is reset to default state. > In the Calibration window of SightMonitor, when entering calibration point information, cancelling from a save, after a warning about out of range values, the bad value should be PN: of 6 Dec 15, 2017

6 reverted to the currently saved value. However, the fields retains the bad value. User should close and re-open the Calibration window to refresh values. PN: of 6 Dec 15, 2017