Determining Your SightSensor Generation 3rd Generation SightSensor Dimensions: 12.1 L x 5.8 W x 5.5 H (30.7 cm L x 14.7 cm W x 14.

Transcription

1 RELEASE NOTES SightLgix Sftware Release 10.8 Release 10 f SightLgix Security System Sftware intrduced the 3rd Generatin f SightLgix hardware devices, with fur times the prcessing pwer, ne third the size and cnsuming less than half the pwer f the prir generatin. The fllwing table shws the differences between 3 rd and 2 nd Generatin SightSensr platfrms. Determining Yur SightSensr Generatin 3rd Generatin SightSensr Dimensins: 12.1 L x 5.8 W x 5.5 H (30.7 cm L x 14.7 cm W x 14.0 cm H) 2nd Generatin SightSensr Dimensins: 18.1 L x 6.8 W x 6.6 H (46 cm L x 17.3 cm W x 16.8 cm H) New firmware releases are included fr bth 3rd Generatin hardware and previus (2 nd ) generatin devices. 3rd Generatin firmware is identified as versin 10.8; previus generatin firmware is 5.6. Unless specifically nted, new features mentined in the later sectin are available nly fr 3 rd Generatin devices. 3rd Generatin SightSensrs prvide tw imprtant features which make installatin easier. > After failed attempts t find an Ethernet IP address using DHCP fr 30 secnds, SightSensrs nw adpt the static IP Address and Gateway > SightSensrs can als be reset back t the factry default settings using a simple prcedure. September 8, 2016 PN: f 7 SightLgix, Inc. 745 Alexander Rd Princetn, NJ

2 SightLgix Enterprise Security System This sftware release f the Enterprise Security System upgrades the Crdinatin System (CS) t versin and the camera firmware t versin fr 3 rd Generatin and fr previus generatins. Updated dcumentatin is als prvided. The SightMnitr client and Crdinatin System server is qualified fr Windws 7 Prfessinal (32 and 64-bit), Windws XP Prfessinal, Windws Server 2003 (32 and 64-bit) and Windws Server 2008 (32 and 64-bit). > Current Vide Management System supprted SightLgix Enterprise System has been qualified with the fllwing systems: 360 Su rveillance AMAG 6.2 American Dynamic Intellex IP Avigiln Bsch DiBs Bsch BVMS Cisc Dedicated Micr DVTEL 5.3 DVTEL 6.0 Exacq Genetec 4.7 Geutebrück Hneywell DVM Hneywell Enterprise Hneywell NVR 2.0 Build 22 IndigVisin Cntrl Center 12 Intergraph Lenel OnGuard 2010, 2012 NVR 7.0 September 8, f 7 SightLgix, Inc. 745 Alexander Rd Princetn, NJ

3 Luxrit March Netwrk Cmmand 1.5 & 1.6 March Netwrk VideSphere Milestne Enterprise Milestne Crprate NICE 10 Nice 11 Release 10 ONSSI Netguard, EVDMS 6.0 Occularis 3.0 Panasnic Pelc Endura Prximex Sny RealSht Manager SWI System with Intelligence Inc. SureView IMMX CS CC Verint Nextiva Vicnnet VideNext Intellex IP SureView IMMX New features This release adds the fllwing new functinality in the SightLgix Enterprise System. These features apply nly t 3 rd Generatin devices, unless explicitly nted therwise. > Reset t default settings supprted in camera web page Bth SightSensrs and SightTrackers nw prvide a cnvenient ptin t clear all settings back t their default state via the camera Netwrk cnfiguratin web page. > Imprvements t Falling Object visin mde SightSensr visin mde Falling Object has been imprved t make it reliable when detecting litering bjects in busy scenes. This feature is available in bth 2nd and 3rd generatin prducts. September 8, f 7 SightLgix, Inc. 745 Alexander Rd Princetn, NJ

4 > Prblem upgrading frm 2nd t 3rd generatin prducts This release f 10.8 firmware includes a fix fr the case where replacing a 2nd Generatin prduct with a 3rd Generatin prduct caused the device t rebt. The issue was triggered when the Crdinatin System database entry fr a camera was created with a 2nd generatin prduct and the device Netwrk hstname was blank. > Vide Stabilizatin fr SightSensr XA SightSensr XA nw supprts vide stabilizatin. This feature is based n the camera s mtin rather than relying n features in the vide. Allws use f stabilizatin with mving backgrund images such as water, trains and grass etc. > Fix ONVIF Event Subscriptin Remved ptential fr Alarm events t be drpped during subscriptin renewal. > New Alarm Zne Rule Disarm Zne When cnfiguring a SightSensr Plicy, an additinal ptin is available in the Rules called a Disarm Zne. This ptin allws fr a cnditin t be detected which will disarm current Zne r all Znes. This is useful in a situatin that is causing unwanted alarms, e.g. Camera is interested in detecting peple, hwever, when a train passes, it bscures the view f the Alarm zne where peple need t be detected. The train may have triggered alarms; hwever, when this new ptin is set, and the train first enters the camera field f view, the train will disarm the zne befre the unwanted alarms are generated. > Additin f Calibrated devices In this release f the Enterprise System, adding a calibrated camera t a SightMnitr site will shw a blinking camera icn if the GPS psitin f the camera cannt be shwn n the site map. This applies t bth 2 nd and 3 rd Generatin devices. > Firmware replaces camera bt cde if necessary SightSensr inspects the versin f the bt cde and replaces it if necessary. This upgrade addresses a rare situatin where the firmware wuld fail t bt crrectly. > Quicker bt times if primary firmware fails t lad SightSensr bt prblems will result in alternative firmware being laded after a shrter delay (3 minutes) after pwer-n. > Imprved IP Dme tracking SightTracker imprved detectin f User Mde with IP Dme prevents falsely disabling aut-tracking. Firmware enables tuning f aut zm thrugh use f PTZ Zm parameters in SightMnitr with AXIS Q6045-E and Infinva V1492MR-T2 dmes. > SightTracker supprt fr Samsung IP dme Currently three Onvif IP dmes have been qualified fr use with this release: AXIS Q6045-E Netwrk Camera running firmware versin: Samsung SNP 6320RH S/W: 1.01_150915, ISP: 1.01_150213, Tracking : 1.17_ September 8, f 7 SightLgix, Inc. 745 Alexander Rd Princetn, NJ

5 Infinva V1492MR-T2 firmware V > Firmware n lnger accepts SSL3 This release is safe against explits f the Pdle (CVE ) vulnerability. This applies t bth 2nd and 3rd Generatin devices. > Firmware is prtected frm ClickJacking Vulnerability This release nly serves un-authenticated web pages which have HTTP header with X-Frame-Optins value DENY. This ffers prtectin frm clickjacking with recent versins f majr brwsers. This applies t bth 2nd and 3rd Generatin devices. > Firmware includes fix fr Onvif discvery This release fixes a bug which causes SightLgix devices t fail t respnd t the discvery request under rare netwrk cnditins. > RTSP Multicast mde vide traverses multiple hps SightLgix devices nw send vide packets with TTL (Time T Live) set t 128. Previus versins used 1. > Gen2 Vide Analytics were enhanced This imprves detectin when a scene has a large number f fast mving bjects. > Gen2 Vide Analytics allws cmbinatin f liter and enter tripwire rules t prevent detectin f bjects that g int and ut f a tripwire zne quickly. Gen3 Vide analytics will never alarm when nn-zer liter and tripwire rule prperties are cmbined. > The server (Crdinatin System) will nw autmatically upgrade an ld database (e.g. backup files) when it is started. Als, database integrity checks are perfrmed which will trigger Severe System Events if prblems are patched, and assciated Device ndes in the camera tree will blink and be frced t discnnected state. > After reviewing, saving r deleting a patched device, the Device nde can be set back t cnnected state r re-added. Carefully review the System Event t determine best actin. > Fr cnvenience, the right-click menu fr a site nw includes discnnect and cnnect peratins fr all devices in the site. > A SightMnitr prblem was fixed which caused unpredictable behavir when devices were ffline. > A SightMnitr prblem was fixed which caused the Firmware upgrade windw t nt pen. > Camera culd receive incmplete znes A prblem which resulted in a pssibility fr incmplete set f Plicies being delivered t the SightSensr has been fixed. The prblem was caused by a cache write back prblem in the database. September 8, f 7 SightLgix, Inc. 745 Alexander Rd Princetn, NJ

6 > Camera culd receive bad znes A prblem which resulted in the pssibility that a save frm the Plicy Zne editr culd deliver a new set f znes t the camera which included bth the pre-edit and pst-edit Zne areas has been fixed. > Add Camera culd ccasinally fail A prblem which resulted in the pssibility f adding a camera t the Camera Tree which never indicates that it is cnnected has been fixed. The camera icn remained Blue and Yellw. The prblem was caused by a cache write back prblem in the database. September 8, f 7 SightLgix, Inc. 745 Alexander Rd Princetn, NJ

7 Upgrading t the new SightLgix Enterprise system If yu have an existing SightLgix system, d the fllwing t install the new sftware bth the server (Crdinatin System) and client (SightMnitr) ver an existing installatin: Check what versin f SightMnitr is currently installed (use the Help/Abut menu). If yu have a versin 5.2 r newer and 64-bit Windws machine cntinue with the upgrade. If yu have a pre-5.2 versin r are using a 32-bit Windws machine cntact SightLgix supprt t clarify additinal steps required t migrate yur system. Back up current settings. This step is ptinal but recmmended (current alarm plicy and ther infrmatin is nt verwritten during an upgrade). See Chapter 5 f the System Manual fr details. Run the install prgram as described in Chapter 2 f the system manual. Start up the SightMnitr and lg in using yur previus passwrds. Uplad the new firmware t the devices as described in Chapter 5 f the system manual. Knwn issues in SightLgix Enterprise system When using this release, please nte the fllwing: If the Firmware Upgrade windw reprts that the selected firmware is nt validated, please use the Refresh List buttn and reselect. When many firmware files are present, the Firmware Upgrade windw may falsely reprt File did nt have valid pst-header ctets and ther errrs. Currently this release f SightLgix Crdinatin System requires that the user select the crrect firmware image fr the target hardware device. Users with 3rd Generatin hardware shuld select firmware versin 10; users with previus generatin hardware shuld select 5. When adding a previusly Cnfigured camera which has been assigned custm username / passwrd, the user must add these credentials t the Cnfiguratin template befre an Add Camera peratin will succeed. In the Plicy editr, znes shuld be edited/added ne at a time. Click Save befre prceeding t the next zne. Likewise under Rule Editr". When editing is cmplete, Znes can be verified using the Zne verlay in the Camera Cnfiguratin. View the Znes in the camera s vide. In the Calibratin windw f SightMnitr, when entering calibratin pint infrmatin, cancelling frm a save, after a warning abut ut f range values, the bad value shuld be reverted t the currently saved value, hwever, the fields retain the bad value. User shuld clse and re-pen the Calibratin windw t refresh values. In the Calibratin windw f SightMnitr, when using the Shw Calibratin ptin, selecting Calibratin Pint 1 shws the psitin n the site map, hwever, after selecting pint 2 and re-selecting pint 1, the X des nt appear n the site map. Uncheck Shw Calibratin and reselect it t again shw the X n the site map fr pint 1. September 8, f 7 SightLgix, Inc. 745 Alexander Rd Princetn, NJ